OK i got a
Huawei y6 Elite (LYO-L02)
Firmware: C718B123
OS: Lollipop_MRI
oK here is my problem i used twrp to try and root my device with no luck so i decided to upgrade my OS all was fine until i rebooted and then i had no OS. I tried to use the tools that twrp has but nothing is working. SO now i have no phone and dont know how to get it back. I cant even restore. So is there anyone out there that can help me please im begging lol
:crying:
Moonlighter
m00nlight3r said:
OK i got a
Huawei y6 Elite (LYO-L02)
Firmware: C718B123
OS: Lollipop_MRI
oK here is my problem i used twrp to try and root my device with no luck so i decided to upgrade my OS all was fine until i rebooted and then i had no OS. I tried to use the tools that twrp has but nothing is working. SO now i have no phone and dont know how to get it back. I cant even restore. So is there anyone out there that can help me please im begging lol
:crying:
Moonlighter
Click to expand...
Click to collapse
Hi moonlighter,
Where did you manage to find this update? I was looking for it myself. And also, did you make a backup in TWRP? If so, try restoring it.
Thanks,
CyanicSword
Cyanic Sword said:
Hi moonlighter,
Where did you manage to find this update? I was looking for it myself. And also, did you make a backup in TWRP? If so, try restoring it.
Thanks,
CyanicSword
Click to expand...
Click to collapse
Hi CyanicSword'
For some reason my twrp backups aren't doing anything for some reason. i have to try and find the lollipop version and try and flash it. I dont have a clue what im doing lol.
Moonlighter
m00nlight3r said:
Hi CyanicSword'
For some reason my twrp backups aren't doing anything for some reason. i have to try and find the lollipop version and try and flash it. I dont have a clue what im doing lol.
Moonlighter
Click to expand...
Click to collapse
Hi moonlighter,
Can you please upload your TWRP backups somewhere and post a link here. Are you sure you backed up everything? Can you also send the link to this "lollipop version" you are talking about?
Thanks,
CyanicSword
Cyanic Sword said:
Hi moonlighter,
Can you please upload your TWRP backups somewhere and post a link here. Are you sure you backed up everything? Can you also send the link to this "lollipop version" you are talking about?
Thanks,
CyanicSword
Click to expand...
Click to collapse
Hi CyanicSword,
I didnt back up twrp properly so doesnt have the os with it here are the codes i found remember its for a Huawei 6 elite (LYO-L02)
*#*#4636#*#* - Phone Information, Usage and Battery
*#06# - IMEI Number
*#0*# - Enter Service Menu
*#*#34971539#*#* - Detailed Camera Information
*#*#273282*255*663282*#*#* - Backup All Media Files
*#*#232339#*#* - Wireless LAN Test
*#*#197328640#*#* - Enable Test Mode for Service
*#*#0842#*#* - Back-light Test
*#*#2664#*#* - Test the Touchscreen
*#*#0842#*#* - Vibration Test
*#*#1111#*#* - FTA Software Version
*#12580*369# - Complete Software and Hardware Info
*#9090# - Diagnostic Configuration
*#872564# - USB Logging Control
*#9900# - System Dump Mode
*#301279# - HSDPA/HSUPA Control Menu
*#7465625# - View Phone Lock Status
*#*#232338#*#* - Shows WiFi MAC address
*#*#1472365#*#* or *#*#1575#*#* - GPS test
*#*#232331#*#* - Bluetooth test
*#*#2664#*#* - Touch screen test
hope this helps
Moonlighter
m00nlight3r said:
Hi CyanicSword,
I didnt back up twrp properly so doesnt have the os with it here are the codes i found remember its for a Huawei 6 elite (LYO-L02)
*#*#4636#*#* - Phone Information, Usage and Battery
*#06# - IMEI Number
*#0*# - Enter Service Menu
*#*#34971539#*#* - Detailed Camera Information
*#*#273282*255*663282*#*#* - Backup All Media Files
*#*#232339#*#* - Wireless LAN Test
*#*#197328640#*#* - Enable Test Mode for Service
*#*#0842#*#* - Back-light Test
*#*#2664#*#* - Test the Touchscreen
*#*#0842#*#* - Vibration Test
*#*#1111#*#* - FTA Software Version
*#12580*369# - Complete Software and Hardware Info
*#9090# - Diagnostic Configuration
*#872564# - USB Logging Control
*#9900# - System Dump Mode
*#301279# - HSDPA/HSUPA Control Menu
*#7465625# - View Phone Lock Status
*#*#232338#*#* - Shows WiFi MAC address
*#*#1472365#*#* or *#*#1575#*#* - GPS test
*#*#232331#*#* - Bluetooth test
*#*#2664#*#* - Touch screen test
hope this helps
Moonlighter
Click to expand...
Click to collapse
Hi Moonlighter,
I cannot see why the codes you have provided are useful, however, can you still please send me your backup so I can try and convert it to an image to help you restore it? Backups are located in Internal Storage (or MicroSD Cars if you have one plugged in)>TWRP>Backup. Go here on your computer using explorer with your phone plugged in. Upload the most recent backup up to something such as MEGA or Google Drive.
Thanks,
CyanicSword
Cyanic Sword said:
Hi Moonlighter,
I cannot see why the codes you have provided are useful, however, can you still please send me your backup so I can try and convert it to an image to help you restore it? Backups are located in Internal Storage (or MicroSD Cars if you have one plugged in)>TWRP>Backup. Go here on your computer using explorer with your phone plugged in. Upload the most recent backup up to something such as MEGA or Google Drive.
Thanks,
CyanicSword
Click to expand...
Click to collapse
Hi CyanicSword
I checked my backups from twrp and they just backed up my phone that had no data on it. this is my problem. Im glad you are trying to help me cause my internal storage doesnt have one file one it its completely blank. But i will give it a shot. Thanks for trying to help me its really appreciated.
speak soon
Moonlighter
m00nlight3r said:
Hi CyanicSword
I checked my backups from twrp and they just backed up my phone that had no data on it. this is my problem. Im glad you are trying to help me cause my internal storage doesnt have one file one it its completely blank. But i will give it a shot. Thanks for trying to help me its really appreciated.
speak soon
Moonlighter
Click to expand...
Click to collapse
Hi CyanicSword
I found a backup but i dont think it will work but here are the files. Hope it works
https://drive.google.com/drive/folders/1V8jcMI9hwbl40Goo1dFTSWsdy_LA0xL5?usp=sharing
Moonlighter
I found a TWRp backup so here is the link i think. I'm not used to google drive but i think i did it right. Thanks for the help once again.
https://drive.google.com/open?id=1k00-rWsFfOFOOnumLj_qbTzuK6Kv9DBp
https://drive.google.com/drive/folders/1k00-rWsFfOFOOnumLj_qbTzuK6Kv9DBp?usp=sharing
thank you
Moonlighter
m00nlight3r said:
I found a TWRp backup so here is the link i think. I'm not used to google drive but i think i did it right. Thanks for the help once again.
https://drive.google.com/open?id=1k00-rWsFfOFOOnumLj_qbTzuK6Kv9DBp
https://drive.google.com/drive/folders/1k00-rWsFfOFOOnumLj_qbTzuK6Kv9DBp?usp=sharing
thank you
Moonlighter
Click to expand...
Click to collapse
Hi moonlighter,
Unfortunately, according to the logs, it seems that you have wiped your /system partition (see screenshot). However, it does seem your system image is intact. Do you have any older backups (check your MicroSD maybe?)? I am also in this same state (accidentally ), so I cannot provide you my own image. Huawei nor Vodafone give out firmwares for this phone, and as you have installed TWRP, they will not reflash your device.
Sorry about this,
CyanicSword
https://mega.nz/fm/yFF0iAoT
Extract the zip
Go to Software --> Extract the rar
Go to LYO-L02C718B124 --> Software --> USB upgrade --> LYO-L02C718B124 --> signed_files
I think what you need is in there.
gunkp said:
https://mega.nz/fm/yFF0iAoT
Extract the zip
Go to Software --> Extract the rar
Go to LYO-L02C718B124 --> Software --> USB upgrade --> LYO-L02C718B124 --> signed_files
I think what you need is in there.
Click to expand...
Click to collapse
Thank you i will give that a go. It wants membership account
Moonlighter
You will probably have to use that to make a TWRP flashable zip of the system or at least the recovery partition then use the microsd card method to update with the big update file elesewhere in that archive.
gunkp said:
https://mega.nz/fm/yFF0iAoT
Extract the zip
Go to Software --> Extract the rar
Go to LYO-L02C718B124 --> Software --> USB upgrade --> LYO-L02C718B124 --> signed_files
I think what you need is in there.
Click to expand...
Click to collapse
Thanks for that gunkp, but could you check the link. I think it may be broken or privates to your account.
Thanks
Sorry try this one
https://mega.nz/#!qEdm0YiA!t_pecLv1nR1YuYaFQq1c7vKEkDV2iHQshrZjnmhaa4c
Related
Hi,
I have made a mistake trying to change a rom for my device (Lenovo s820).
I thought my phone was gone, but step by step I was able to bring it back to life.
Now I have a working rom and I set back the IMEI's, but I still have "no service".
After reading a lot, I understand that I need to recover my "NVRAM" and to do so, I need for somebody to send my a file called "NVRAM.IMG" which applies to my device.
I can't find this file anywhere on the net.
Can somebody please send me?
Thanks in advance
aburdo said:
Hi,
I have made a mistake trying to change a rom for my device (Lenovo s820).
I thought my phone was gone, but step by step I was able to bring it back to life.
Now I have a working rom and I set back the IMEI's, but I still have "no service".
After reading a lot, I understand that I need to recover my "NVRAM" and to do so, I need for somebody to send my a file called "NVRAM.IMG" which applies to my device.
I can't find this file anywhere on the net.
Can somebody please send me?
Thanks in advance
Click to expand...
Click to collapse
Hi,
Nobody can help?
Please, I can't use my phone.
how to did you bring your lenovo phone back to life cause mine get stuck in boot logo
Invalid Imei
aburdo said:
Hi,
I have made a mistake trying to change a rom for my device (Lenovo s820).
I thought my phone was gone, but step by step I was able to bring it back to life.
Now I have a working rom and I set back the IMEI's, but I still have "no service".
After reading a lot, I understand that I need to recover my "NVRAM" and to do so, I need for somebody to send my a file called "NVRAM.IMG" which applies to my device.
I can't find this file anywhere on the net.
Can somebody please send me?
Thanks in advance
Click to expand...
Click to collapse
you can restore with this tutorial, see the link in indonesian language search on google @ key word
OFFICIAL LOUNGE LENOVO S820 kaskus
i cant share the link do to the policy "To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding"
neocortex95 said:
you can restore with this tutorial, see the link in indonesian language search on google @ key word
OFFICIAL LOUNGE LENOVO S820 kaskus
i cant share the link do to the policy "To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding"
Click to expand...
Click to collapse
it is possible to restore imei BUT in there is not only code but some other settings that will be not restored or taken by default values.
in my case i restored it but i cannot connect to GSM operator ((
please share the nvram with me for s820 thx in advance!
it's easy how to do it (contact me if any issues)
thx a lot
Solution of NVRAM.img and no-services Lenovo S820
aburdo said:
Hi,
I have made a mistake trying to change a rom for my device (Lenovo s820).
I thought my phone was gone, but step by step I was able to bring it back to life.
Now I have a working rom and I set back the IMEI's, but I still have "no service".
After reading a lot, I understand that I need to recover my "NVRAM" and to do so, I need for somebody to send my a file called "NVRAM.IMG" which applies to my device.
I can't find this file anywhere on the net.
Can somebody please send me?
Thanks in advance
Click to expand...
Click to collapse
This is the solution....thanks
alaa.hamdy said:
This is the solution....thanks
Click to expand...
Click to collapse
How do you apply it, I have the same problem.
The bat file is not working, it says cannot find adb.exe.
I put the adb.exe at system32 folder along with the dll files and still bat is not working
aburdo said:
Hi,
I have made a mistake trying to change a rom for my device (Lenovo s820).
I thought my phone was gone, but step by step I was able to bring it back to life.
Now I have a working rom and I set back the IMEI's, but I still have "no service".
After reading a lot, I understand that I need to recover my "NVRAM" and to do so, I need for somebody to send my a file called "NVRAM.IMG" which applies to my device.
I can't find this file anywhere on the net.
Can somebody please send me?
Thanks in advance
Click to expand...
Click to collapse
hi dear
lenovo s820 imei
Your phone will fix the problem?
I also have this problem.
[Solved] Solution For Recover your IMEI For Lenovo S820
1) You must Root your Smartphone by Framaroot 1.8.1 (Apk for simple usein smartphone)
2) Install Root Explorer
3) Open Root Explorer and go to dev Folder and check pttycmd1 file
4) If "Pttycmd1" not exist ,copy that from "dev/radio" Folder and paste to "dev" Folder
5) Install Terminal Emulator (like cmd in windows but in Linux andorid)
6) open Terminal Emulator and enter "su" then enter (For super user Authentication)
7) in next line enter this codes
echo 'AT +EGMR=1,7,"IMEI_1"'> /dev/pttycmd1
echo 'AT +EGMR=1,10,"IMEI_2"'> /dev/pttycmd1
IMEI_1 , IMEI_2 : you must enter 15 digits for each (For Valid Number use your old IMEI Code and if u want check that in
"imei-number.com/imei-validation-check"
8) After Each line only Press Enter and nothing more
9) You must Restart Your Phone (not fast booting)
10) After Restart Press *#06# and enjoy your Entered IMEI
11) You can Backup your IMEI ID By Software like MobileUncle (Suitable For Chines Mobile like Lenovo)
12) Good Luck
Afshin.jazi
alaa.hamdy said:
This is the solution....thanks
Click to expand...
Click to collapse
nice share,,,
solved s820...
does nvram.img file needed with secro-sign.img to retain lost sr.no and imei no mac
does nvram.img file needed alongwith secro-sign.img file to retain the lost imei no sr.no mac address and bluetooth settings in meditek 6737m device name moto c plus.
Hey there guys Hope to have a great day .
I made my first Custom ROM for Nokia Lumia 920 (RM-821) . this ROM contains the latest 10586 build I couldn't remember the minor OS version !
This ROM as I said the first custom ROM that I made and maybe it has some problems that I maybe don't know so please send me feedbacks here to work on it.
What is new in this ROM :
-The latest build of W10M
-Pre-Installed of the apps you need (Word, Excel, and etc.)
-The Microsoft Lumia 950XL Ringtones
How to install :
OK, first of all download ROM Parts and extract it somewhere .
better to flash your phone or do a hard reset before flashing this ROM.
download WPInternals and unlock your phone's BootLoader and Enable the Mass Storage Mode.
in WPInternals go to the -> Platform -> Flash -> Flash Separate partition and select the MainOS partition witch is extracted from the rar file .
and then simply flash it
After flash It's recommended to do a hard reset and then setup your phone first login to your ROM and enjoy it.
If you had any problems with the steps take a look at this post :
http://forum.xda-developers.com/showpost.php?p=68440016&postcount=54
Thanks @minimog34
I am working to do some registry changes like Pre-Interop unlock and etcetera in next versions of this ROM but guys please let me know what you want
Important : It is my first ROM and it should be risky .
ROM Download Link : https://www.mediafire.com/folder/nd6yd9pzbld7v/DHT_L920 (3 Parts)
NGame
Dormant Hackers Team
Reserved
Thanks! With redstone coming these custom ROMs will be more and more useful for x20 users Perhaps it's a good idea to make a guide on how to make custom ROMs? I'd definitely be interested in that, I still have a 920 here for testing things out on
RedStoneFun said:
Thanks! With redstone coming these custom ROMs will be more and more useful for x20 users Perhaps it's a good idea to make a guide on how to make custom ROMs? I'd definitely be interested in that, I still have a 920 here for testing things out on
Click to expand...
Click to collapse
You need to know what changes you are free to do and witch files are editable.
you can't edit and modify whatever you want .
creating custom ROM is really easy but if you what are you doing.
You have to backup your MainOS Partition and then mount the bin file using OSFMount. then you can see conteent and you can edit it.
Hi! Please help me. I can't press button "Flash partions", nothing happens. i took unlock boot. In Flash mode wrote file is very big. I don't know what to do.
thanks for your work.
any chance of having a lumia 925 windows 10 rom? i'm on windows phone 8.1 and can't update anymore.
hamza87 said:
thanks for your work.
any chance of having a lumia 925 windows 10 rom? i'm on windows phone 8.1 and can't update anymore.
Click to expand...
Click to collapse
Did you install Windows 10 ROM? Can you help me?
Radik1 said:
Did you install Windows 10 ROM? Can you help me?
Click to expand...
Click to collapse
No I didn't. I'm stuck on 8.1 for the moment. I have a lumia 925.
If you have a lumia 920, you could install the rom provided in this thread using wpinternals.
http://www.wpinternals.net/
some videos to help:
https://www.youtube.com/watch?v=1dGDinlXMTo
https://www.youtube.com/watch?v=F9ZImDdpX9s
hamza87 said:
thanks for your work.
any chance of having a lumia 925 windows 10 rom? i'm on windows phone 8.1 and can't update anymore.
Click to expand...
Click to collapse
Yeah sure you can unlock your boot loader and enable mass storage mode and then use regedit to change Phone Manufacturer .
Also you can help me to create your phones ROM
Radik1 said:
Hi! Please help me. I can't press button "Flash partions", nothing happens. i took unlock boot. In Flash mode wrote file is very big. I don't know what to do.
Click to expand...
Click to collapse
Really sorry for my late. you can see that WPInternals show you why your flash separate partition won't be activated, so let me know what's your error
hamza87 said:
thanks for your work.
any chance of having a lumia 925 windows 10 rom? i'm on windows phone 8.1 and can't update anymore.
Click to expand...
Click to collapse
ngame said:
Really sorry for my late. you can see that WPInternals show you why your flash separate partition won't be activated, so let me know what's your error
Click to expand...
Click to collapse
No problem. So, what I did? After Successful Unlock bootloader I switch to Mass Storage. Then My laptop find new disk with Main OS. I think it's good. Then I choose your Main OS, and tap "Flash partitions". (as picture). Many clicks don't help. Nothing... Install Windows 10 it's important for me.
Radik1 said:
No problem. So, what I did? After Successful Unlock bootloader I switch to Mass Storage. Then My laptop find new disk with Main OS. I think it's good. Then I choose your Main OS, and tap "Flash partitions". (as picture). Many clicks don't help. Nothing... Install Windows 10 it's important for me.
Click to expand...
Click to collapse
same issue here,
pressing flash does nothing in mass storage mode,
Radik1 said:
No problem. So, what I did? After Successful Unlock bootloader I switch to Mass Storage. Then My laptop find new disk with Main OS. I think it's good. Then I choose your Main OS, and tap "Flash partitions". (as picture). Many clicks don't help. Nothing... Install Windows 10 it's important for me.
Click to expand...
Click to collapse
mmmalas said:
same issue here,
pressing flash does nothing in mass storage mode,
Click to expand...
Click to collapse
hm, Why you guys switch to mass storage mode ?
boot phone in Normal or Flashing mode and after that your phone should be detected .
ngame said:
hm, Why you guys switch to mass storage mode ?
boot phone in Normal or Flashing mode and after that your phone should be detected .
Click to expand...
Click to collapse
when switching to flashing mode, it says that the size of the parition is too big for 'main OS'
I am coming from windows 8.1 image
mmmalas said:
when switching to flashing mode, it says that the size of the parition is too big for 'main OS'
I am coming from windows 8.1 image
Click to expand...
Click to collapse
I see this problem too. The size of the parition is too big for 'main OS'
Flash Partitions nothing happens with only Main OS selected
hi,
I have downloaded all three parts of Main OS and extracted to a separate folder.
Lumia 920 with 8.1 at present
have unlocked the boot loader via wpinternals
Now as per your instructions, I have connected the mobile and changed mode to Flash mode and in Platform -> Flash -> Flash separate partitions, selected only the main OS and guided it to the select the extracted (downloaded) file of yours. If only this file is selected and clicked Flash Partition button, nothing happens
If I choose the EFIESP file and Data file which I have taken backup from my phone and then select "Flash Partition" it says
Flash Failed!
Size of partitions 'MainOS' and 'Data' together are too big.
Hence can you extract the Data file of your mobile and share it, so that we can try to flash with both the files together. Even Wpinternal also describe that "Remember that the MainOS partition and Data partition are tied together, so you need to flash both partitions together".
ngame said:
Yeah sure you can unlock your boot loader and enable mass storage mode and then use regedit to change Phone Manufacturer .
Also you can help me to create your phones ROM
Click to expand...
Click to collapse
Quote:
Originally Posted by hamza87
thanks for your work.
any chance of having a lumia 925 windows 10 rom? i'm on windows phone 8.1 and can't update anymore.
Yeah sure you can unlock your boot loader and enable mass storage mode and then use regedit to change Phone Manufacturer .
Also you can help me to create your phones ROM
Yes I want do it cause the insider are no longer working for us and we have to take control about our own devices.
I have one L925 too and need help, and waiting for updates in this room like you sayd.
I want to try install it but I need your help give instructions about how to do !
You can give me the edits to change on regedit ?
suhail_ssr said:
hi,
I have downloaded all three parts of Main OS and extracted to a separate folder.
Lumia 920 with 8.1 at present
have unlocked the boot loader via wpinternals
Now as per your instructions, I have connected the mobile and changed mode to Flash mode and in Platform -> Flash -> Flash separate partitions, selected only the main OS and guided it to the select the extracted (downloaded) file of yours. If only this file is selected and clicked Flash Partition button, nothing happens
If I choose the EFIESP file and Data file which I have taken backup from my phone and then select "Flash Partition" it says
Flash Failed!
Size of partitions 'MainOS' and 'Data' together are too big.
Hence can you extract the Data file of your mobile and share it, so that we can try to flash with both the files together. Even Wpinternal also describe that "Remember that the MainOS partition and Data partition are tied together, so you need to flash both partitions together".
Click to expand...
Click to collapse
Thanks bro I will share EFIESP partition in a little while
Guys EFIESP is now available on mediafire take a look if it solve your problems
really sorry about late in answering you guys, my laptop HDD ran into a bad sector and it made my laptop useless but now it's fine again
ngame said:
Hey there guys Hope to have a great day .
I made my first Custom ROM for Nokia Lumia 920 (RM-821) . this ROM contains the latest 10586 build I couldn't remember the minor OS version !
This ROM as I said the first custom ROM that I made and maybe it has some problems that I maybe don't know so please send me feedbacks here to work on it.
What is new in this ROM :
-The latest build of W10M
-Pre-Installed of the apps you need (Word, Excel, and etc.)
-The Microsoft Lumia 950XL Ringtones
How to install :
OK, first of all download ROM Parts and extract it somewhere .
better to flash your phone or do a hard reset before flashing this ROM.
download WPInternals and unlock your phone's BootLoader and Enable the Mass Storage Mode.
in WPInternals go to the -> Platform -> Flash -> Flash Separate partition and select the MainOS partition witch is extracted from the rar file .
and then simply flash it
After flash It's recommended to do a hard reset and then setup your phone first login to your ROM and enjoy it.
I am working to do some registry changes like Pre-Interop unlock and etcetera in next versions of this ROM but guys please let me know what you want
Important : It is my first ROM and it should be risky .
ROM Download Link : https://www.mediafire.com/folder/nd6yd9pzbld7v/DHT_L920 (3 Parts)
NGame
Dormant Hackers Team
Click to expand...
Click to collapse
Hi Ali tell me how or what to do on mass storage of my Lumia 925 to upgrade to windows 10 mobile.
r_x4 said:
Hi Ali tell me how or what to do on mass storage of my Lumia 925 to upgrade to windows 10 mobile.
Click to expand...
Click to collapse
Connect your phone into the Mass Storage Mode to your PC.
open Regedit.exe on your pc and click on HKEY_LOCAL_MACHINE
from File Menu click on Load Hive and then path this file on your phone:
Windows\System32\Config\System
then it asks you for a name, name for example 123 or blabla
after that you have 123 or blabla sub key in HKLM navigate to that and Platform-->DeviceTargetingInfo
to see what you have to change here see this : http://forum.xda-developers.com/win...windows-mobile-10-redstone-rs1-build-t3319375
after changing values again mark 123 sub key and from file menu click on unload hive .
after unloading reboot phone and get insider builds .(This hack could be apply on any Windows Phone with 1 GB of RAM)
Hello guys!
2 questions?
1. Did anyone change the china-rom (a) to the world-rom (g)? Did all settings and apps and messages gone?
2. At the china-rom (a) i did not find a button for update? Did anyone know where i find it?
Thanks
best regards
peter
pmartin said:
Hello guys!
2 questions?
1. Did anyone change the china-rom (a) to the world-rom (g)? Did all settings and apps and messages gone?
2. At the china-rom (a) i did not find a button for update? Did anyone know where i find it?
Thanks
best regards
peter
Click to expand...
Click to collapse
Hello!
1. Yes, there is a method for Pro 7 and a different method for Pro 7 Plus, you can find them here: https://forum.xda-developers.com/pr...inese-to-g-t3690752/post74384828#post74384828
2. The update app has been removed on purpose by the seller, because they modify stock chinese rom, if you will update to A or G rom from official site the app will appear. The only update method available for you is recovery mode (Power + Volume Up)
Where do I have to put the update.zip? Because I don't have the update button neither.
Gmegg said:
Where do I have to put the update.zip? Because I don't have the update button neither.
Click to expand...
Click to collapse
put in main folder of your internal storage. rename update.zip
and go recovery install it
I have a phone with a modified Chinese ROM, 6.1.3.2A, with the update options removed from the settings menu. I assume that its not possible to update this to the Global one without bricking the phone?
Can I update the phone with the method described above to the newest chinese version or will this remove the possibilities to use playstore and so on?
Leone1 said:
I have a phone with a modified Chinese ROM, 6.1.3.2A, with the update options removed from the settings menu. I assume that its not possible to update this to the Global one without bricking the phone?
Can I update the phone with the method described above to the newest chinese version or will this remove the possibilities to use playstore and so on?
Click to expand...
Click to collapse
Because i'm new at xdadevelopers
this site does not let me send a big message with details so that you can get this fixed not paste links to make it easier for you
but here is my email so that i can send you info about this.
and if you can paste links please after that you email me copy and paste the email that i am going to reply you and paste it here so other people could see it.
[email protected]
D'Azueta said:
Because i'm new at xdadevelopers
this site does not let me send a big message with details so that you can get this fixed not paste links to make it easier for you
but here is my email so that i can send you info about this.
and if you can paste links please after that you email me copy and paste the email that i am going to reply you and paste it here so other people could see it.
[email protected]
Click to expand...
Click to collapse
Ive sent you an email now, check spam folder just in case!
did email arrrived?
My phone i also in guest mode.
most of the settings gone
no update menu
no sound menu
no factory settings menu
no back screen
no recovert at all
No, he didnt send any email :/
The procedure has been confirmed in Xda https://forum.xda-developers.com/sho...&postcount=412 and also by myself.
Remember that this procedure makes a full wipe and will erase all the internal memory, it is essential to make a Backup
Instructions
This is the requirements
1- Upgrade with USB-OTG
An OTG cable
A USB drive (8GB at least) Formatted as NTFS or ExFat
Also you can use an USB drive + USB C adapter
download 178 firmware following the link ( thanks @SLVMSF )
https://forum.xda-developers.com/showpost.php?p=79841124&postcount=175
To download 161 firmware just follow the link below ( thanks @SLVMSF )
https://forum.xda-developers.com/showpost.php?p=79660859&postcount=733
To Download .153 -L29
Download VOG-L29C 9.1.0.153 (C431E4R2P2) _Firmware_9.0.0_r3_EMUI9.1.0_05015THP.
https://www.dropbox.com/s/32shgrdzaokswgy/dload_Vog-L29.153.zip?dl=0
: https://transferxl.com/08vY9zCDBTWKdN
To Download .153-L09
look for the right firmware in this page and follow the guide
https://support.halabtech.com/index....older&id=45220
Open the Zip and extract the dload folder on the pendrive
- Turn off the P30 Pro
- Connect the pendrive with the OTG cable
- Now press the three buttons at the same time.
- Volume +
- Volume -
- Power button.
(The p30pro will light up and vibrate, keep the buttons pressed)
Only when you see the blank screen and EMUI appears will you release the buttons.
The flashing will start and lasts about 2 minutes.
After flashing the P30 Pro will restart automatically.
2- Upgrade with NM Card
- Extract the dload folder to the Nm card
- The same option for USB-OTG is valid.
And also you can try this one
- Enter the service menu by dialing * # * # 2846579 # * # *
- Press Option 4. Sofware Upgrade
- Press OPTION 1. Memory Card Upgrade
The device will restart and the update will begin.
I am not responsible for bad use of this guide.
Cheers
Thanks to
@Cambridge for his First full guide on how to flash by dload method
Reserved
juanpirulo said:
The procedure has been confirmed in Xda https://forum.xda-developers.com/sho...&postcount=412 and also by myself.
Remember that this procedure makes a full wipe and will erase all the internal memory, it is essential to make a Backup
Instructions
This is the requirements
1- Upgrade with USB-OTG
An OTG cable
A USB drive (8GB at least) Formatted as NTFS or ExFat
Also you can use an USB drive + USB C adapter
Download VOG-L29C 9.1.0.153 (C431E4R2P2) _Firmware_9.0.0_r3_EMUI9.1.0_05015THP.
https://1drv.ms/u/s!AkomK-CQYJF9ijZmxc4J8GQvIwKf
Open the Zip and extract the dload folder on the pendrive
- Turn off the P30 Pro
- Connect the pendrive with the OTG cable
- Now press the three buttons at the same time.
- Volume +
- Volume -
- Power button.
(The p30pro will light up and vibrate, keep the buttons pressed)
Only when you see the blank screen and EMUI appears will you release the buttons.
The flashing will start and lasts about 2 minutes.
After flashing the P30 Pro will restart automatically.
2- Upgrade with NM Card
- Extract the dload folder to the Nm card
- Enter the service menu by dialing * # * # 2846579 # * # *
- Press Option 4. Sofware Upgrade
- Press OPTION 1. Memory Card Upgrade
The device will restart and the update will begin.
I am not responsible for the bad use of this tutorial.
Cheers
Thanks to
@Cambridge for his First full Tutorial on how to flash by dload method
Click to expand...
Click to collapse
Actually, option 1 using both volume keys and bower key works on NM card as wel. No need to enter the service menu.
wow, thanks for work.
Where can i download VOG-L29 version C605 ?
-Zork- said:
wow, thanks for work.
Where can i download VOG-L29 version C605 ?
Click to expand...
Click to collapse
https://support.halabtech.com/index.php?a=downloads&b=folder&id=44877
USB otg mode is workking.
It's so simple !!
Thanks OP.
Option 1 and 2 work with either NM or USB-OTG drive
It did not work well with my device.
I tried in OTG mode.
The environment is 9.1.0.124 (C431E4R2P2).
When you start eRecovery, it becomes Software installed failed. (Incompatibility with current version)
What's wrong
Have you downloaded all the files and placed the three update files in to a folder called 'dload'?
Also, if having issues try the service menu method.
Don't let me download the firmware ?. I have what could it be?
takato23 said:
Don't let me download the firmware . I have what could it be?
Click to expand...
Click to collapse
try again here https://1drv.ms/u/s!AkomK-CQYJF9ijZmxc4J8GQvIwKf if its not working just follow the link to the direct download below
just download from here, https://support.halabtech.com/index.php?a=downloads&b=file&c=download&id=121664 , you will have to register first to download.
something is not going well with the drive link i put on first post. cheers
If it will not allow you to download due to too many people accessing the file, then add it to your drive. once there, right click and select "Create copy" you can then download the copy
i am trying to upload to mega. if someone have a valid link and want to share here please just post it. cheers
Unable to locate L09 firmware v 153. Don't think it's available yet.
153 firmware for C185 is available now in Halabtech. Just flashed it.
Hi All
I'm on 3 UK and when I inserted my sim it downloaded 3UK splash screens and apps etc. Can I flash this over my current 3 branded firmware using the USB-OTG method and will it still have all the 3UK customisation afterwards or will it debrand, if it will debrand it is there any way I can stop this happening again. Sorry for all the questions
Thanks in advance
csw43 said:
Hi All
I'm on 3 UK and when I inserted my sim it downloaded 3UK splash screens and apps etc. Can I flash this over my current 3 branded firmware using the USB-OTG method and will it still have all the 3UK customisation afterwards or will it debrand, if it will debrand it is there any way I can stop this happening again. Sorry for all the questions
Thanks in advance
Click to expand...
Click to collapse
You asked at just the right time, my device was a branded ThreeUK device... I just flashed it 30 mins ago on my device. Completely debranded it, however when you setup the phone it will give you an option to "Update" to a new custom version which is the carrier modified firmware. Presume this will rebrand it so i simply skipped it, note however it shows as update available in settings still if you want to install it in future manually. That being said... I wonder if it's possible to extract and see what this "Update" contains since it's 176MB which is a lot. Whether any optimisations ect are worth it for the branding.
That's great, thank you for the info! It really is a crap idea to customise a device based on operator sim card.
I will have a go at flashing this now, I've already downloaded the files
Thanks again
Hello, anybody know where I can find a firmware for the VOG-L04? Thanks in advance.
links not working guys, any others to try? Have signed up to website but file is blocked; too many DL's. Need this real bad, didn't realize Funky H puts files up that fail safety net after flash Thanks
I bought a Changan CS75 Plus Smart 2023. I tried to connect my Android phone to the car Radio Head unit using CarAuto (Global) App. But I could not download any Android Apps to the system. Can you help me with that Please?
Also can I download and use Android Auto App on the system or Car Play? How can I do that? Is there a software or an App or a dongle that will do that?
What is the code or number to get into the Android system of the Changan CS75 Plus 2023.
Thank you for your help, consideration, and Cooperation.
Can anyone please share the step on how to access the developer option and the passcode to enter in the system..
Hey, I own Cs75 plus 2022 smart
I'm struggling with the same thing. But I found these codes, It may help you guys.
for adb *#518121#* ( I don't know what this is for but I found it)
for file explorer *#518200#*
for settings *#518300#* (from here you can find the developer option
for car settings *#201301#* (don't miss it, it is very dangerous if you don't know what to do)
M7mdrd1 said:
Hey, I own Cs75 plus 2022 smart
I'm struggling with the same thing. But I found these codes, It may help you guys.
for adb *#518121#* ( I don't know what this is for but I found it)
for file explorer *#518200#*
for settings *#518300#* (from here you can find the developer option
for car settings *#201301#* (don't miss it, it is very dangerous if you don't know what to do)
Click to expand...
Click to collapse
where do i put this codes?, I have a Changan CS55 Plus. You now where I can find info about updates?
smelor said:
where do i put this codes?, I have a Changan CS55 Plus. You now where I can find info about updates?
Click to expand...
Click to collapse
Use the phone panel
Any one was able to install apps? It is giving me not authorized error
mohamadabdou said:
Any one was able to install apps? It is giving me not authorized error
Click to expand...
Click to collapse
Same problem I tried to install using the file explorer on the developer options but still unauthorized error