So i wanted to change roms to stock and deleted the system stuff now the devices only displays the samsung galaxy j7 logo then its just a black screen.
i just want to get to recovery mode
someone help
Try this from my early post .
#Method 1
1. Install Smart Switch on your PC : https://www.samsung.com/global/download/smartswitchwin/
2. From rest fallow this video to follow easy : https://www.youtube.com/watch?v=9QhJngOuLQ4
#Method 2
1. Make Free account on sammobile.com
2. go here https://www.sammobile.com/firmwares/galaxy-j7-/SM-J710F/
check if is your model SM-J710F or another ...
put your region from where the phone you bought. Use lattest Version of OS
3. Extract (unzip) the firmware file to the desktop or what ever is easy for you to locate firmware
4. Download Odin v3.12.7 from here: https://dl.sammobile.com/Odin3-v3.12.7.zip
Extract Odin ZIP file
Open Odin v3.12.7
5. Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
If you are still not sure how to do , follow this video : https://www.youtube.com/watch?v=7SK3IMprKVQ
Related
Hi, I've just used this guide to Flash my Galaxy S2 to the stock rom from Hong Kong, I've tried using this rom:
ZSKG2
Firmware info
PDA:ZSKG2
PHONE: XXKG1
Date: 08/07/2011
OZS Hong Kong (BRI, CWT, KOR, TGY, TWM):http://www.multiupload.com/RLEHXYE5UG
ZSKG2 Stock Kernel: http://www.multiupload.com/UB74X7OYG3
Password: [email protected]
I flashed it following these steps: from this link : http://forum.xda-developers.com/showthread.php?t=1075278
Flashing Firmware with Odin
1. Just download the firmware version you want from the second or third posts and extract the .tar file in the archive and save it somewhere
2. Reboot your phone to download mode.
To get download mode shut down the device. After it shuts off completely simultaneously press the Down volume key+ Home button + press the power button .
You should see a warning asking you to press volume up if you want to continue or volume down to cancel, press volume up. You are now in download mode!
3. Start Odin
4. Click on the PDA button and browse to the .tar file that you extracted in step 1
If the package has more than one .tar archive then they will be labelled with PDA, Phone/Modem and CSC. Just put them in the corresponding section of Odin
5. DO NOT PUT .PIT FILE AND DO NOT, I REPEAT, DO NOT TICK REPARTITION.
Anyone ask about .pit file is a moron
6. Connect the USB cable and wait for the ID:COM section to turn yellow
7. Click start to flash
8. Do not disconnect the cable or turn off the device, it will reboot when it finishes.
I flashed it and everything started; however, upon starting up any other programs or even texting or calling i get an error which says something like this "android.process.acore has stopped unexpectedly please try again"
I would really like to be able to start it up with the original chinese keyboard and various other chinese settings. What am I doing wrong?
Do a factory reset from recovery.
so your saying i should do a factory reset after flashing over correct?
btw... some of the ZSKG2 files are corrupt or something... theres an error when i download.. i downloaded several times b4 i found one that i could extract without an error message sryy i think i should have private messaged that or something but i can't post on that link cause i don't have more than 10 posts yet
THANK YOU!!! it works now ^^ thank you very much! =)
I download this stock rom from this thread http://forum.xda-developers.com/showthread.php?t=1651794&page=2
Plz guide me how i flash this rom on my Galaxy Tab 10.1 Wifi P7510
There is only one file in the zip file with this name (P7510XEUKL2_P7510XXKL2_HOME.tar.md5) I select the PDA and push the start button, but very little progress bar shown on my tab then stopped, and not increase the progress for 1 hour. and the last message in the odin message box is "image.cache" then i reboot the tab and error comes "error occurred during boot" then i again start the tab by pressing the volume down + power button then it comes on the selection page for downloading mode and recovery mode. then i go to recovery and recover my backup.
now tell me which option I select, I mean, PDA, Bootloader, Phone or CSC.
yasirshafiq said:
I download this stock rom from this thread http://forum.xda-developers.com/showthread.php?t=1651794&page=2
Plz guide me how i flash this rom on my Galaxy Tab 10.1 Wifi P7510
There is only one file in the zip file with this name (P7510XEUKL2_P7510XXKL2_HOME.tar.md5) I select the PDA and push the start button, but very little progress bar shown on my tab then stopped, and not increase the progress for 1 hour. and the last message in the odin message box is "image.cache" then i reboot the tab and error comes "error occurred during boot" then i again start the tab by pressing the volume down + power button then it comes on the selection page for downloading mode and recovery mode. then i go to recovery and recover my backup.
now tell me which option I select, I mean, PDA, Bootloader, Phone or CSC.
Click to expand...
Click to collapse
Installation Guide
1) Make sure you have the drivers installed
2) Extract ur firmware it to get its content which would be a .tar
3) Download Odin3 v1.85. Then, extract it to get these two required files – Odin3 v1.85.exe and Odin3.ini. Do NOT delete the .ini file since it’s required too. When asked in step 6 below, open Odin by double clicking on the Odin3 v1.85.exe file.
4) Disconnect your tablet if it’s connected to PC. Power it off. Wait 5-6 seconds for vibration to confirm complete switch off.
5) Now, put the Galaxy Tab 10.1 tablet in Download Mode (also called Odin mode) — press and hold, until Samsung Galaxy logo appears — these keys together: Volume_DOWN + Power.
6) Wait till you a screen with options to boot into recovery or download (odin) mode.
7) Press Volume Up key to boot into download mode.
8) Open Odin (from step 3) — Odin3 v1.85.exe. Admin privileges would be required!
9) Connect your Galaxy tab 10.1 tablet to PC now. You should get the message “Added! !” under the Odin’s message box in the bottom left. And you should also see COM port with a number in Yellow. If you don’t get this message, then probably there is a problem with drivers. Make sure you’ve the right drivers installed!
10) Select these files in Odin at respective tabs.
11) Click the PDA Tab, and select the big .tar file “P7510XEUKL2_P7510XXKL2_HOME.tar.md5″
Important! Make sure these 2 check-boxes are selected: Auto Reboot and F. Reset Time. Also, leave the Re-Partition check-box clear (blank), as we are only using a .tar file or PDA file to flash.
12) Double check everything said in step 11.
13) Now, hit the START button to begin the flashing process. When it finishes, your tablet will automatically reboot — and you can unplug the cable when Galaxy logo appears. Plus, you’ll get a PASS (with green background) message in the left-most box at the very top of the Odin. If it’s red and with FAIL written over it, the process flashing process wasn’t successful, Try again, and take care to complete the whole process without any break whatsoever.
Hit Like If it helps..
How do you get the drivers that work when the Tab is booted to ODIN? I've tried everything I can find and have been unable to get the correct drivers installed.
akhil17kr said:
Installation Guide
1) Make sure you have the drivers installed
2) Extract ur firmware it to get its content which would be a .tar
3) Download Odin3 v1.85. Then, extract it to get these two required files – Odin3 v1.85.exe and Odin3.ini. Do NOT delete the .ini file since it’s required too. When asked in step 6 below, open Odin by double clicking on the Odin3 v1.85.exe file.
4) Disconnect your tablet if it’s connected to PC. Power it off. Wait 5-6 seconds for vibration to confirm complete switch off.
5) Now, put the Galaxy Tab 10.1 tablet in Download Mode (also called Odin mode) — press and hold, until Samsung Galaxy logo appears — these keys together: Volume_DOWN + Power.
6) Wait till you a screen with options to boot into recovery or download (odin) mode.
7) Press Volume Up key to boot into download mode.
8) Open Odin (from step 3) — Odin3 v1.85.exe. Admin privileges would be required!
9) Connect your Galaxy tab 10.1 tablet to PC now. You should get the message “Added! !” under the Odin’s message box in the bottom left. And you should also see COM port with a number in Yellow. If you don’t get this message, then probably there is a problem with drivers. Make sure you’ve the right drivers installed!
10) Select these files in Odin at respective tabs.
11) Click the PDA Tab, and select the big .tar file “P7510XEUKL2_P7510XXKL2_HOME.tar.md5″
Important! Make sure these 2 check-boxes are selected: Auto Reboot and F. Reset Time. Also, leave the Re-Partition check-box clear (blank), as we are only using a .tar file or PDA file to flash.
12) Double check everything said in step 11.
13) Now, hit the START button to begin the flashing process. When it finishes, your tablet will automatically reboot — and you can unplug the cable when Galaxy logo appears. Plus, you’ll get a PASS (with green background) message in the left-most box at the very top of the Odin. If it’s red and with FAIL written over it, the process flashing process wasn’t successful, Try again, and take care to complete the whole process without any break whatsoever.
Hit Like If it helps..
Click to expand...
Click to collapse
Thanks
@akhil17kr thanks for your help.
caseym said:
How do you get the drivers that work when the Tab is booted to ODIN? I've tried everything I can find and have been unable to get the correct drivers installed.
Click to expand...
Click to collapse
Install Kies and it should install the drivers. I'm pretty sure you can download them from samsung.com too. But when you use odin make sure that Kies is completely closed (even check in processes in task manager) or odin won't work
Sent from my GT-I9100 using xda premium
How to update Galaxy Alpha (SM-G850Y) SM-G850Y to G850YDOU2ANK1 Android 4.4.4
Download Firmware file (above link). If you have already done? That’s good, if not, then see a Firmware database list
Extract Firmware file into a folder
Download Odin Latest Version – Link
Now switch off your Galaxy Alpha (SM-G850Y) SM-G850Y and wait 5-8 seconds
Put your Galaxy Alpha (SM-G850Y) SM-G850Y into Download Mode by Press and hold the Volume Down + Home buttons together, and then press the Power button till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.Downloading-Mode
Now run Odin latest version – Download Link
Connect your phone to your PC
Successfully connectivity will show one of the ID: COM boxes will turn yellow with the COM port number. Then POPUP Message arrives under Odin’s message box saying “Added!!”.odin-flash-firmware-instructions
Now click on select these files
Click the PDA Button, and select the .tar file here with *code* appearing in its nameodin2ng
Click the Phone Button, and select file with *modem* in its name (leave it blank if there is no such file)
Click the CSC Button, and select file with *csc* in its name (leave it blank if there is no such file)selecting-multi-firmware-files_thumb
Click the PIT Button, and select the pit file. Use only if you got it while extracting in step 1 above, otherwise ignore it.
In ODIN, Please check the Auto Reboot and F. Reset Time options ( Re-Partition check box is optional, I prefer to check it if you are using .pit fileunroot-galaxy-s3
Now click on the Start button
Wait until process will complete. On completion of the process your phone will be rebooted and display a message with a green background in the leftmost box at the very top of the Odin. Here you can unplug the USB cable to disconnect your device from the computer.
Congratulations, you have done it
Source
This is Old twrp . New recovery for a800i can be found here http://forum.xda-developers.com/sam...recovery-twrp-3-0-1-0-galaxy-a800i-f-t3350856
Official release of TWRP recovery for the SM-A800I, Exynos5433
1. You will need to download and install Odin on your PC.
2. Once you have Odin installed, download the proper .tar file for your device from the download link below.
3. Power off your device. Turn on your device using the proper key combo to get into download mode and plug usb cable
4. Use the AP button to browse to and select the tar file that you downloaded
5. Uncheck Auto-reboot and flash
Reboot to recovery immediately after flashing using POWER + HOME + VOL DOWN, as soon as the screen goes blank change to VOL UP whilst still holding the other buttons.
Download link: https://dl.twrp.me/a8hplte/
Source: https://github.com/TeamWin/android_device_samsung_a8hplte
Recovery made by androidlover.
Flash this at your own risk. Make sure that you have stock firmware downloaded from SAMMOBILE in case of problems. This will trip knox counter. Last, no one here is responsible of what you do with your device. This recovery is meant for only samsung A800I with exynos chipset. Note on some android it is required to enable OEM unlocking when flashing. Go into Settings -> Developer Options -> OEM unlocking
thanx going to try soon thanx brother
Vivacity said:
This is Old twrp . New recovery for a800i can be found here http://forum.xda-developers.com/sam...recovery-twrp-3-0-1-0-galaxy-a800i-f-t3350856
Official release of TWRP recovery for the SM-A800I, Exynos5433
1. You will need to download and install Odin on your PC.
2. Once you have Odin installed, download the proper .tar file for your device from the download link below.
3. Power off your device. Turn on your device using the proper key combo to get into download mode and plug usb cable
4. Use the AP button to browse to and select the tar file that you downloaded
5. Uncheck Auto-reboot and flash
Reboot to recovery immediately after flashing using POWER + HOME + VOL DOWN, as soon as the screen goes blank change to VOL UP whilst still holding the other buttons.
Download link: https://dl.twrp.me/a8hplte/
Source: https://github.com/TeamWin/android_device_samsung_a8hplte
Recovery made by androidlover.
Flash this at your own risk. Make sure that you have stock firmware downloaded from SAMMOBILE in case of problems. This will trip knox counter. Last, no one here is responsible of what you do with your device. This recovery is meant for only samsung A800I with exynos chipset. Note on some android it is required to enable OEM unlocking when flashing. Go into Settings -> Developer Options -> OEM unlocking
Click to expand...
Click to collapse
Hey brother did anyone have any Custom ROM for Galaxy A8 2015
Am having the same question.
Any nougat custom rom for our phone.
mumuni said:
Am having the same question.
Any nougat custom rom for our phone.
Click to expand...
Click to collapse
I don't think there are any custom ROM for this phone, as i have been desperately searching for them.
my english is not good so sorry
hello i see most thears with error Volume Size is too big..... or error hidden.img.ext4 fail! (size) is too big
i find methot for repair it
what u need
1. Odin i use 3.07
2. firmware 4 files AP, BL, CSC, CP and u must have PIT (J5NLTE_EUR_OPEN_HIDDEN_200MB)
now:
1. Run Odin
2. Add files
Bootloader = BL
PDA = AP
PHONE = CP
CSC = CSC
and ADD PIT
u must uncheck Auto reboot
U must select
1. RE partirion
2. Nand erase
3. F reset time.
now connect ur phone Via Download mode
Volume down + home + power+ next one click volume up
Odin found ur phone then u Click start and wait
after end odin give u blue screen RESET on odin, long hold power. Phone restart wait for phone go to recovery u on first screen see error then Press random keys vol + - and power don't hold u see stock recovery select factory reset and restart phone
i have this soft XEO Poland but im from Poland Android 6.0.1 no brand clear official from samsung
one Pack with all files what u need Rom Official Samsung Android 6.0.1 XEO Poland
Download
after this u can again flash TWRP and custom roms This method repair ur Partition on phone u can use this rom as stock what u want