Does anyone know what the difference is, if any, between "Default Hibernation" and "Normal Hibernation"?
I'm using a Samsung Galaxy Note Pro tablet SM-P900 with stock Lollipop 5.0.2, rooted and Xposed.
FlyingHorseGA said:
Does anyone know what the difference is, if any, between "Default Hibernation" and "Normal Hibernation"?
I'm using a Samsung Galaxy Note Pro tablet SM-P900 with stock Lollipop 5.0.2, rooted and Xposed.
Click to expand...
Click to collapse
Same for most devices unless default mode has been changed to shallow, aggressive, etc.
Davey126 said:
Same for most devices unless default mode has been changed to shallow, aggressive, etc.
Click to expand...
Click to collapse
Sorry about my ignorance but where are the settings for these other modes? I'm running Greenify 3.8.8.
Sent from my Samsung SM-P900 using XDA Labs
FlyingHorseGA said:
Sorry about my ignorance but where are the settings for these other modes? I'm running Greenify 3.8.8.
Click to expand...
Click to collapse
Err...under settings. Can also be set by other 'doze Management' apps (not recommending; just noting).
Davey126 said:
Err...under settings. Can also be set by other 'doze Management' apps (not recommending; just noting).
Click to expand...
Click to collapse
Sorry, I looked everywhere under settings for both versions 3.8.8 and 3.8.9 and I can't find anything related to changing the default values for the hibernation modes. Could this be something related to the Android version? As I noted in the OP I'm running Lollipop 5.0.2.
Sent from my Samsung SM-P900 using XDA Labs
FlyingHorseGA said:
Sorry, I looked everywhere under settings for both versions 3.8.8 and 3.8.9 and I can't find anything related to changing the default values for the hibernation modes. Could this be something related to the Android version? As I noted in the OP I'm running Lollipop 5.0.2.
Click to expand...
Click to collapse
Sorry, overlooked the reference to Android version.
Shallow hibernation and all doze variants require Android 6+. There are no default hibernation mode settings in the Greenify app on Android 5.1 and below (current as of v3.8.9). However, you *may* be able to set the default hibernation mode to 'deep' via the (at present unreleased) "Island" app. Haven't played with that yet.
Related
Hello guys
Today I'm presenting a module for Xposed (V82) that I developed for personal use but that I wish to share with you all.
AllRotationsEnable allow you to use the 180 degrees rotation.
I tested it only with Android 7.0 on MIUI 9, Xiaomi Redmi Note 4x; but it should work on all major Android roms.
Users in comment reports it's fully working with Samsung S7.
It's also on Xposed Official Repo: http://repo.xposed.info/module/com.jacopomii.allrotationsenable
Souce code: https://github.com/jacopotediosi/AllRotationsEnable
Ask if you have some questions/bugs
Works well with Lineage OS 14.1 thanks
I don't know why this could be useful, honestly, but I've tried it to report whether or not it worked on TouchWiz, and it works.
S7 (G930-F) running Android 7.0 with systemless Xposed 89.0 (SDK 24) in Magisk 15.2. Using TGP 1.20.01 (based in stock Samsung ROM) with TGPKernel 5.9.14.
Joseahfer said:
I don't know why this could be useful, honestly, but I've tried it to report whether or not it worked on TouchWiz, and it works.
S7 (G930-F) running Android 7.0 with systemless Xposed 89.0 (SDK 24) in Magisk 15.2. Using TGP 1.20.01 (based in stock Samsung ROM) with TGPKernel 5.9.14.
Click to expand...
Click to collapse
Thank you for your report
I found this useful because I can use my phone in top-down mode during charge and I don't have to worry about the cable
thanks!but it doesn't work on my Xperia Z3 Tablet with stock 6.0.1 MM.
Has anyone tried this on 7.1.1? I'm on Xperia stock rom. Will give it a go when I get home from work.
Edit: seems to be working fine thanks!
Works on Xperia z2 existenz MM. Thanks
This module requires a newer XposedBridge version (82) and thus cannot be activated?
Galaxy Note 2 4.4.2
Per apps settings?
Thanks for the app!
Any plans for making the setting on a per app basis?
What exactly does it do? Does it enable force auto rotation for all aps+system? I have some apps that won't auto rotate, would this module force them to?
Currently I use the app rotation for that but I'm thinking maybe this is a more lightweigt approach.
trohn_javolta said:
What exactly does it do? Does it enable force auto rotation for all aps+system? I have some apps that won't auto rotate, would this module force them to?
Currently I use the app rotation for that but I'm thinking maybe this is a more lightweigt approach.
Click to expand...
Click to collapse
Nope, it just enable upside rotation (normally Android has only three rotations).
It doesn't force anything, but I already saw a module that can do it. Search on xposed repo.
trohn_javolta said:
What exactly does it do? Does it enable force auto rotation for all aps+system? I have some apps that won't auto rotate, would this module force them to?
Currently I use the app rotation for that but I'm thinking maybe this is a more lightweigt approach.
Click to expand...
Click to collapse
You should try app "Adaptive Rotation Lock".. For me very useful..
nazri5363 said:
You should try app "Adaptive Rotation Lock".. For me very useful..
Click to expand...
Click to collapse
Thx, I now use Rotation - Orientation Manager: https://play.google.com/store/apps/details?id=com.pranavpandey.rotation
It's great.
Jacopo Mii said:
Thank you for your report
I found this useful because I can use my phone in top-down mode during charge and I don't have to worry about the cable
Click to expand...
Click to collapse
Exactly, this is my main purpose too!
Does this have the option to lock orientation? Would be super useful
After enabling this module mobile not rotating in reverse portrait pls help i want reverse portrait
Sony Xperia z5 work excellent
Any app out there that can rotate the lockscreen?
Update for 9 please? Or any alternative?
hi guys, what app can i use to handle the led notification? light manager is crashing on my phone
I'm using Lightflow Legacy. To get the best performance, install Lightflow Pro, then install Lightflow legacy after, and follow instructions. Working great for me on a Sprint S9+
meyerweb said:
I'm using Lightflow Legacy. To get the best performance, install Lightflow Pro, then install Lightflow legacy after, and follow instructions. Working great for me on a Sprint S9+
Click to expand...
Click to collapse
what's the differences between pro and legacy?
Legacy lacks a few minor features, but works much better with Samsung devices. IIRC, if you install the regular version on a Samsung phone, the app will suggest install the legacy version.
meyerweb said:
I'm using Lightflow Legacy. To get the best performance, install Lightflow Pro, then install Lightflow legacy after, and follow instructions. Working great for me on a Sprint S9+
Click to expand...
Click to collapse
meyerweb said:
Legacy lacks a few minor features, but works much better with Samsung devices. IIRC, if you install the regular version on a Samsung phone, the app will suggest install the legacy version.
Click to expand...
Click to collapse
ok, so i will install the pro version, than the legacy and then will i have to launch the legacy ones?
When you install legacy, it will ask you to "disable" the pro version, which it does through the app. You don't have to manually disable it yourself.
You might want to try just installing the legacy version. When I first tried this, a few years ago, that didn't work very well, but I suppose the author might have made some improvements since then.
meyerweb said:
When you install legacy, it will ask you to "disable" the pro version, which it does through the app. You don't have to manually disable it yourself.
You might want to try just installing the legacy version. When I first tried this, a few years ago, that didn't work very well, but I suppose the author might have made some improvements since then.
Click to expand...
Click to collapse
i installed the app, but now the led doesn't blink anymore with whatsapp notifications, why? have i to disable them in whatsapp and activate them in light flow? And how can I set different led color for normal messages and group messages?
You definitely need to activate it in Lightflow. And if you can set whatsapp to notify with an icon and no LED, that's probably the answer. If not, contact the developer. He is very responsive.
meyerweb said:
You definitely need to activate it in Lightflow. And if you can set whatsapp to notify with an icon and no LED, that's probably the answer. If not, contact the developer. He is very responsive.
Click to expand...
Click to collapse
I didn't understood. What I have to set in light flow in order to have 2 different led color for normal messages and group messages? I can set only the normal notification
Inviato dal mio SM-G965F utilizzando Tapatalk
turtuv said:
I didn't understood. What I have to set in light flow in order to have 2 different led color for normal messages and group messages? I can set only the normal notification
Inviato dal mio SM-G965F utilizzando Tapatalk
Click to expand...
Click to collapse
I don't use Whatsapp, so I really can't answer your question. I don't know if it's possible to have a separate color for group vs. normal messages. I suggest you contact the developer of the app and ask him.
AppOpsXposed Re is a module for the Xposed framework that restores AppOps functionality on recent Android versions.
"Re" (short for "revised") version got a few updates compared to the original, making it work on newer Androids, like Nougat and Oreo.
Original thread by caspase: AppOpsXposed - AppOps for 4.3+
What is AppOps? What's the difference between AppOps and permissions?
AppOps is a feature that is included in Android starting with JellyBean 4.3. It allows the user to limit an apps functionality, regardless of permissions granted; for example, you can prevent an app from reading your contact list, or accessing your current location. The difference between revoking permissions and using AppOps is that in the latter case, the affected app will not know what happend and, most importantly, will (usually) not crash. In the case of the location, the app will think that the location is currently unavailable. In the case of your contact list, the app will see an empty list.
An important thing to keep in mind is that AppOps was not intended for end-users, so some features do not work as advertised. Limiting "Keep awake" for example has no effect, as this was not implemented by the Android developers.
Compatible with all Android versions from 4.3 'Jelly Bean' to 9.0 'Pie'.
Credits:
Xposed Framework: rovo89 & Tungstwenty
Original module: caspase
Download: AppOpsXposed Re on Xposed Module Repository
How to report problems efficiently?
- Enable the Debug log in settings
- Use functions that don't work as intended
- Export the logs from Xposed app and put them on PasteBin
- Post on the XDA thread the link along with more information about your device
XDA:DevDB Information
AppOpsXposed Re, Xposed for all devices (see above for details)
Contributors
Xspeed, caspase
Source Code: https://github.com/XspeedPL/AppOpsXposed
Xposed Package Name: at.jclehner.appopsxposed.re
Version Information
Status: Stable
Current Stable Version: 1.30.6
Stable Release Date: 2019-03-09
Created 2018-08-10
Last Updated 2019-03-08
you rock dude. I had to settle for my 2nd favorite rom for my daily driver bc it had no AppOps. Now I'm free!!! when I get time I will flash back and give this a try.
Thanks for sharing!!!!
Hey, thanks for your work (even though I'm still on Nougat).
I have three questions though:
- when I go into an app's persmissions screen the sliders in 1.30.4 turned green when turned on and grey when off. In 1.30.5 they're always grey, can this be modified so they change color depending on how their status is?
-also in an app's permission screen, the name of each permission was differently formated and translated in 1.30.4. Could this be ported over to your version of AppOps?
-the next thing didn't work with 1.30.4 either but maybe it can be fixed (or my phone simply isn't compatible), when I go to designs and change the icons of AppOpsXposed, none of them changes in the phone's settings / app overview screen.
I have some screenshots attached. My phone is the HTC 10 on Nougat, regularly rooted
sutobe said:
- when I go into an app's persmissions screen the sliders in 1.30.4 turned green when turned on and grey when off. In 1.30.5 they're always grey, can this be modified so they change color depending on how their status is?
Click to expand...
Click to collapse
It's really easy to change, I am experimenting with colors at the moment.
When I was releasing this I prioritized functionality over looks, but it will be done, no worries.
-also in an app's permission screen, the name of each permission was differently formated and translated in 1.30.4. Could this be ported over to your version of AppOps?
Click to expand...
Click to collapse
I am aware of that, the labels got messed up when I was porting the code base. I'll see what can be done.
-the next thing didn't work with 1.30.4 either but maybe it can be fixed (or my phone simply isn't compatible), when I go to designs and change the icons of AppOpsXposed, none of them changes in the phone's settings / app overview screen.
Click to expand...
Click to collapse
It actually works like the previous version. To see those changes you can either reboot or restart the "UI" process.
To make it work auto-magically a lot more work would be needed, and to be honest, for a single time use feature it's not worth it in my opinion.
It works
But after disabling some ops (permissions) those apps on going notification don't show the notification bar although they're running in the background.
But if i revert it then the notification shows
FC after start at HTC One M7 with Android 5 ROM
Sent from my HTC One using XDA Labs
Nice this cutie is now offical.
Used your inoffical mod since oh my gosh ..long time ago...about a year
on LP, MM, Nougat
:good:
Awww yeah!... Thankyou for this!
Auto close app everytym when i open :/
Mockingbird_ said:
Auto close app everytym when i open :/
Click to expand...
Click to collapse
How to report problems efficiently?
- Enable the Debug log in settings
- Use functions that don't work as intended
- Export the logs from Xposed app and put them on PasteBin
- Post on the XDA thread the link along with more information about your device
Click to expand...
Click to collapse
Maybe try caspase appsops.
For me it works now better with my nougat device. Better permisson controll* and less errors on apps with blocked permissions :good:
*possible to block audio focus on music, video, notification
Hi! What's the difference of this and the appopsxposed without the "re"?~
nijihana said:
Hi! What's the difference of this and the appopsxposed without the "re"?~
Click to expand...
Click to collapse
Original module was supposedly abandoned. This version was updated to support newer Androids, including Nougat and Oreo.
"Re" is short for "revised".
Xspeed said:
Original module was supposedly abandoned. This version was updated to support newer Androids, including Nougat and Oreo.
"Re" is short for "revised".
Click to expand...
Click to collapse
Thank you!
Any chance blocking apps permission to change system settings?
A language file for translation would be nice
edit:
Now i see modul can block "write system" e.g. it can denin on playstore / service but some apps still
change system ( froce app to run in backround) after install an update.
So if an app has no permission to write system how it can change settings even if i denin playstore & service permisson to change system? ^^^^
This app is broking the item "Fingerprint scanner" in the settings of phone. I get FC when I try to open it. My phone is HTC U11, Adrroid 8.0, ROM LeeDroid.
@Xspeed: 'Add OP_BOOT_COMPLETED' in the hacks menu still doesn't work after checking the box and rebooting, there is no option anywhere to control whether an app can start on boot. I'm running a pure AOSP ROM so there is no Privacy Guard, etc. Is there a workaround/fix for this?
Thanks!
@Xspeed Just curious, what are the chances of this getting updated for Pie?
toBsucht Psp said:
Now i see modul can block "write system" e.g. it can denin on playstore / service but some apps still
change system ( froce app to run in backround) after install an update.
So if an app has no permission to write system how it can change settings even if i denin playstore & service permisson to change system? ^^^^
Click to expand...
Click to collapse
What settings is the app changing after you disabled the permission?
smallKING81 said:
This app is broking the item "Fingerprint scanner" in the settings of phone. I get FC when I try to open it. My phone is HTC U11, Adrroid 8.0, ROM LeeDroid.
Click to expand...
Click to collapse
I am going to need LogCat during the FC from you to be able to see what's exactly wrong.
AnonVendetta said:
@Xspeed: 'Add OP_BOOT_COMPLETED' in the hacks menu still doesn't work after checking the box and rebooting, there is no option anywhere to control whether an app can start on boot. I'm running a pure AOSP ROM so there is no Privacy Guard, etc. Is there a workaround/fix for this?
Click to expand...
Click to collapse
This boot run blocking is actually a hack that works only on some devices, to be honest it doesn't work on mine either
bkkzak said:
@Xspeed Just curious, what are the chances of this getting updated for Pie?
Click to expand...
Click to collapse
If you mean EdXposed, you're unfortunately out of luck. This module HEAVILY relies on so called "resource hooks" that EdXposed doesn't support at the moment. Sorry
What is the difference between this app and AppOpsX from F-Droid? does it work on Android Pie?
MDV106 said:
What is the difference between this app and AppOpsX from F-Droid? does it work on Android Pie?
Click to expand...
Click to collapse
To be honest I've never heard of AppOpsX. The two applications work completely different under the hood.
There is stuff non-Xposed apps can't do, like adding a shortcut to AppOps on the app details activity.
Regarding your second question, YES!
The fresh new 1.30.6 version supports Android 9.0 Pie and EdXposed.
I managed to make it work by separating resource hooking related stuff to a second module and made it optional for other functionality.
Simple? Absolutely. Clever? Maybe. AppOps? Xposed. Sorry :/
I have noticed that apps like Tasker and other brightness adjustment apps cannot change my Poco F1's brightness to higher settings compared to the stock MIUI brightness slider.
Do you experience the same issue ? (for those who tried these type of apps)
Thanks
hyborian said:
I have noticed that apps like Tasker and other brightness adjustment apps cannot change my Poco F1's brightness to higher settings compared to the stock MIUI brightness slider.
Do you experience the same issue ? (for those who tried these type of apps)
Thanks
Click to expand...
Click to collapse
Yes me too and I want to find any app could do it
magaedy said:
Yes me too and I want to find any app could do it
Click to expand...
Click to collapse
I thought it was a custom kernel issue as I use Franco Kernel, but it seems like the phone itself. Still looking for a solution.
hyborian said:
I thought it was a custom kernel issue as I use Franco Kernel, but it seems like the phone itself. Still looking for a solution.
Click to expand...
Click to collapse
I'm on stock rom and non-root, I think there is some security on controlling brightness by any 3rd party and it should be disabled
magaedy said:
I'm on stock rom and non-root, I think there is some security on controlling brightness by any 3rd party and it should be disabled
Click to expand...
Click to collapse
Then it really could be some security or restriction, argh. I agree it must be disabled, have to find out how. Maybe I'll check with the 3rd party folks, they probably need to know anyway.
Ok, the developer of my favored app to adjust brightness fixed the problem, BFC app.
Now, I hope Macrodroid and Tasker can fix it, it might be the same problem for new Xiaomi phones.
Is there a way to auto expand notifications on the notification shade of the S23U? This is a question that gets asked with every new Samsung phone release since at least the N10 without a satisfactory answer.
Try quick star , goodlook module
hoss_n2 said:
Try quick star , goodlook module
Click to expand...
Click to collapse
Not available for the S23U it seems
GroovyGeek said:
Not available for the S23U it seems
Click to expand...
Click to collapse
I'm using it on my S23 Ultra search for goodlock on galaxy store
For some unfortunate stupidity Good Lock is not available in all countries. Only some separate modules are available globally.
nmt1900 said:
For some unfortunate stupidity Good Lock is not available in all countries. Only some separate modules are available globally.
Click to expand...
Click to collapse
Use Nicelock.
Not the same, but good enough for those of us who can't have Goodlock.
NiceLock for Samsung - Apps on Google Play
Easily access customization modules that you installed on your Samsung devices.
play.google.com
hoss_n2 said:
I'm using it on my S23 Ultra search for goodlock on galaxy store
Click to expand...
Click to collapse
I can find it in the galaxy store and install.iy but then it does not appear in Goodlock or anywhere else.
Never mind, it is in the Make up panel. Such a stupid UI
This seems to expand the quick panel not the notifications. Or am I missing something
GroovyGeek said:
This seems to expand the quick panel not the notifications. Or am I missing something
Click to expand...
Click to collapse
Yeah that's what I'm experiencing too
I know what you're looking for but don't think there is a native function for OneUI (or most other phones for that matter)
I recall the only way to do this in the past was a custom ROM or (at the time) it was either xposed or magisk, can't remember.