miui 7.11.30 redmi 3 pro fingerprint not working - Xiaomi Redmi 3 Questions & Answers

miui 7.11.30 redmi 3 pro fingerprint not working, can't even add a new fingerprint, after deleting the old ones
The sensor seems just die......
Any clue ?
Thanks

reboot recovery wipe cache e dalvilk reboot system

Related

Can't connect to camera

I have redmi Note 3 (sd version) bootloader unlocked officially rooted and on miui 7.2.5
After clicking couple of images i get can't connect to camera error
I have tried clearing camera data and cache but still same problem
Any suggestions?
Sent from my Redmi Note 3 using XDA-Developers mobile app

Random Reboot on my Kenzo

Hey Guys,
I have the problem that my Kenzo either randomly (which is less common ) , or after an installation / uninstall an app from the Play Store restarts repeatedly . When it is booted , it starts after a few seconds again . For this loop , I can only escape if I turn off the phone 10 Seconds - then everything runs again . As Custom Kernel I have the Radon 2.6 and when Custom Rome Exodus Rome . I have already tried with another kernel - unfortunately without success . Dalvik Cache / Cache Wipe has not helped . When Xiaomi.eu Rome I did not have the problem . I have before I have uninstalled an app , sometimes running over it Logcat , perhaps you will indeed smarter than me
I hope you can me there somehow help .
And sorry for my bad translate-english
any news with that issue?
cause of what i understood , there is a bug hardware isuue with Charging Controller on Xiaomi Redmi Note 3 pro ,
and hardware must be repaired....

BIG trouble with IDO / system proces failed :(

My Redmi 3 IDO is stuck at the startup, system process failed ;(
Sometimes it starts up after +-2 hours... today it started, I immediately went to factory reset, but nothing happened when I pushed the button...
Then I tried to install TRWP & Kingroot to root my device, but this process hangs too, I immediately get into the lock screen and touch screen doesn't work.
I had put some roms, TRWP on my SD Card to flash asap, but I cannot get to flash...
Then I installed MiPCSuite (adb drivers installed on pc), but no device found.
I also installed XiaMiFlash on my pc and tried to flash a TRWP or Rom from there, but immediately fail.
I guess that original bootloader from Xiaomi is protected or something.
How can I get over this, so that I can install a new bootloader from where I can flash customised roms ?
Don't know what to do now, flash from pc,...
Touchscreen doesn't work, it starts up in lock screen and the light goes out faster than usual.
Today it booted up once, I had turned of the lock screen, but now it is on again...
I can only put my phone in download or recover mode with that built in Chinese bootloader, but don't know if I can do something from there.
I also tried to boot without SD/Sim card so that i'm sure that nothing blocks it, but this didn't help.
I guess I used too much apps & cleaners....
Maybe i'm lucky and it will boot after 2-3 hrs, but still when i'm in my device, nothing seems to work, this really sucks
Letting the battery run out and wait a few days to turn it on won't help probably...
Theres a lot of factors to determine in this case, first of all, is it a Snapdragon model (kate/kenzo) or a Mediatek(henessy)?, what version of MIUI are you using?, and most importantly, what did you do to get the phone in that state?
But in your case the most reasonable solution is put the phone on EDL mode and flash it using MIFlash, that software is used only for flashing an original MIUI Rom, you cant install TWRP or any other rom.
Yes it's a snapdragon (also tested it with an app), it's the IDO version (Redmi Note 3 international version).
The Miui is still the original version 7.
Actually I didn't nothing special that the phone got in that state, I think I just installed too many apps which resulted in a conflict that the proces system doesn't react and hangs at startup.
It's also strange that fastboot mode does nothing, it just shows the animated figures...
I will bootup in EDL download mode and try to flash the stock rom, the only thing is that I don't know which one.
My version is the IDO version, it's not in this list, I'll try the Kenzo.
http://en.miui.com/a-234.html
Cannot receive hello packet error and it stops flashing... strange
Innovator said:
Yes it's a snapdragon (also tested it with an app), it's the IDO version (Redmi Note 3 international version).
The Miui is still the original version 7.
Actually I didn't nothing special that the phone got in that state, I think I just installed too many apps which resulted in a conflict that the proces system doesn't react and hangs at startup.
It's also strange that fastboot mode does nothing, it just shows the animated figures...
I will bootup in EDL download mode and try to flash the stock rom, the only thing is that I don't know which one.
My version is the IDO version, it's not in this list, I'll try the Kenzo.
http://en.miui.com/a-234.html
Cannot receive hello packet error and it stops flashing... strange
Click to expand...
Click to collapse
your phone is redmi 3 not redmi note 3...do not flash with redmi note 3 firmware
Innovator said:
Yes it's a snapdragon (also tested it with an app), it's the IDO version (Redmi Note 3 international version).
The Miui is still the original version 7.
Actually I didn't nothing special that the phone got in that state, I think I just installed too many apps which resulted in a conflict that the proces system doesn't react and hangs at startup.
It's also strange that fastboot mode does nothing, it just shows the animated figures...
I will bootup in EDL download mode and try to flash the stock rom, the only thing is that I don't know which one.
My version is the IDO version, it's not in this list, I'll try the Kenzo.
http://en.miui.com/a-234.html
Cannot receive hello packet error and it stops flashing... strange
Click to expand...
Click to collapse
Kenzo is codename for Redmi Note 3 and Kate is for Redmi Note 3 Special Edition (International version). Ido codename is for Redmi 3 (http://en.miui.com/download-298.html). Here is URL to Redmi 3's forum: https://forum.xda-developers.com/redmi-3
Thanks, it wasn't necessary anymore, while driving from work and waiting a few hours it suddenly started up and I quickly reseted to factory settings
ExEdd said:
Kenzo is codename for Redmi Note 3 and Kate is for Redmi Note 3 Special Edition (International version). Ido codename is for Redmi 3 (http://en.miui.com/download-298.html). Here is URL to Redmi 3's forum: https://forum.xda-developers.com/redmi-3
Click to expand...
Click to collapse

screen freeze after update Miui 10 Android 9 Pie

Hi, I have a mistake with the xiaomi Redmi Note 5 I have buy for my child. I'm french but I have import it the package are close red box write global version the plug are EU version model M1803E7SG (photo 1)
When I receive it the phone are on Miui 9 Android 8. I make update on Miui 10 Android 8 no mistake all work fine.
After configure it with mi account of my child and restore Google backup & mi cloud great phone I like it. I receive update for Android 9 Pie Miui 10 I make it and when restart restore all backup but can't finish to configure it because screen freeze ??? I do to reboot to Recovery stock 3.0 and wipe data and reboot but the phone start with mi logo & powered by Android but stay and stay.
I restart it on Recovery and with mi assistant and mipc suite china beta 3.0 flash Miui 10 Android 9 Pie again I can't use miflash because the BL is lock ! I have autorization but the phone are not associed on dev settings.
After restart I configure it as a new phone and can start great but after 2min use it the screen freeze again on spring board !!!
The phone are a global version only make Ota update and don't understand why can't use it ?
Please if someone Can help me.
Thanks
That's Redmi Note 5 Pro not Redmi Note 5. Wrong forum.
Look for solutions on whyred forum
q.sadid said:
Look for solutions on whyred forum
Click to expand...
Click to collapse
Hi, mine is Redmi 5 plus and I have the same problem. I even changed the screen and it weirdly worked fine for a few days but then went back to freezing after a few minutes of use.

Installing on redmi note 9s (curtana)

Hi, I've wanted to install ubuntu touch on my xiaomi redmi note 9s, which runs android 12 with miui 14.
But, since I've started to try, I always have seemed to run into the same problem : once I start the installation, it gets stuck very long on the "formating cache" screen, and it doesn't seem to want to move.
As said in the title, my device is a custana one, so it runs on GLOBAL software, and I don't know if that can affect something, as it isn't very clear if it only works on india one or if it can work on global.
Thank you in advance for your tips !

Categories

Resources