X829
RR-PS
For a long time and at different official/ developer firmware I am struggling with this phone.
1) does not work otg, cdla.
2) Very quiet call speaker and microphone it is necessary to put a palm so that the interlocutor can hear me.
I'll do without otg but help me fix at least the sound. Picked build.prop, something rewrote in mixer_path
With the edited mixer_path, the volume seems to have risen, but now it's quiet again.
Can I change the speaker? I do not mind if it helped.
Related
With my handset, the Incoming call is quite low, inaudible...
Even at the loudest setting (5)
How to make it much loud, Please ?
Qtek support don’t give any solution, any help is welcome.
First post, but i'll try.
You have 2 configurations of audio. One in the phone and, normally, one of the bluetooth. The bluetooth audio is at the loudest setting too? If it is, try the bluetooth in other phone. If doesn't work, try to hard reset the phone. There are some WM phones that the audio became inaudible for nothing, and after a reset, became normal.
Hope it works.
Sorry the terrible english
@PreZ
Thank you for your help… Prez, Your & My English are “Impecável »
But The Bluetooth audio haven’t loudest setting, I don’t think so…
Can you give more informations, about that ?
Sure,
In some brands, the bluetooth doesn't control de volume of the phone, so when in use, press one of the two buttons of it. One is for raise volume and the other is to down the volume. I know it's common in Motorola's bluetooth.
The phone WM goes until 5 the volume, but normally, some bluetooth have 8 or 10 sound level.
Try this and feedback me if it worked, or, send me a pm in other language
preZ said:
Sure,
In some brands, the bluetooth doesn't control de volume of the phone, so when in use, press one of the two buttons of it. One is for raise volume and the other is to down the volume. I know it's common in Motorola's bluetooth.
The phone WM goes until 5 the volume, but normally, some bluetooth have 8 or 10 sound level.
Try this and feedback me if it worked, or, send me a pm in other language
Click to expand...
Click to collapse
I know that Prez..., thank you for all your help
But the problem with my Qtek 8500 (It's a French name), the sound is very very down, and it's inaudible in car for exemple... despite the sound level is 5 (The maximum).
I know two or five words in potuguese (And Impecável, is one of them... abrigado Prez)
EDIT : problem solved, the phone is not guilty. By the way, there is still a bug, the volume can't be adjusted during call. I use the "A2DP Volume" to manage the volume, as a workaround.
Hello,
I can't explain how such a good phone can fail at the bluetooth feature. The volume is incredibly low, I can't explain this as we talk about digital signal. Furthermore, during a bluetooth call I can't adjust the volume.
At least did somebody find a workaround? I tried AD2P volume, without success. Maybe I didn't find the right parameters. I saw some mods in the dev zone, all about incall volume, but I don't want to ruin things that currently work.
dafunky said:
Hello,
I can't explain how such a good phone can fail at the bluetooth feature. The volume is incredibly low, I can't explain this as we talk about digital signal. Furthermore, during a bluetooth call I can't adjust the volume.
At least did somebody find a workaround? I tried AD2P volume, without success. Maybe I didn't find the right parameters. I saw some mods in the dev zone, all about incall volume, but I don't want to ruin things that currently work.
Click to expand...
Click to collapse
I dont have this problem. My bluetooth headphones are much louder than a cable ones.
Thanks for your answer. I saw other testimonies about this problem, it would be a good thing to identify the cause.
I don't nave this problem either. Quite the opposite, actually, sometimes the bluetooth headset is even too loud. Are you sure this is not headset-dependent?
Thank you for your advice. After some tests the phone is not guilty, the handsfree had set a low volume during the first connection. We can close this subject.
Hello, first of all my english isn't good enough to describe all i want to say, i hope it's enough understandable.
My device xperia z3 (D6653) has a problem on speaker with incoming calls and activate loudspeaker phone during phone calls, the ringtone is too low.. as well as my speaker in phone calls.. the music is working fine and loud as it should be (both speaker work, top and bottom) but when somebody call me the phone rings too low even though every volume level is set to max! it's even more weird because when i go to "phone ringtone" like i would to set a new one, when i play the ringtone i already put or any another one the volume is normal as it should be and both speakers work.. but the problem still goes on when somebody calls me the bottom speaker only working and the phone sound is too low to hear of course as i mentioned when i active phone speaker during a call the bottom speaker still only working and i can't hear the caller while no sound or noise near me (quite place)!!
please help me, i am really very very disappointed.. i am missing most of my incoming calls because of this, and i can't hear the when loudspeaker is activated in calls..
P.S: the phone sound overall become a bit low but pretty noticeable after lollipop update or whatever i don't know, it was more louder when i bought it new, btw the speaker issue is remained the same when it was new though..
Build number; 23.4.A.0.546
Thanks.
please anybody help me!! i need a new software to solve this problem.. i can barely hear my phone ringing or even loudspeaker during calls...
Jeinyx said:
please anybody help me!! i need a new software to solve this problem.. i can barely hear my phone ringing or even loudspeaker during calls...
Click to expand...
Click to collapse
You will have better luck asking here:
http://forum.xda-developers.com/z3/help/sony-xperia-z3-help-thread-t3164306
That's where the experts for your device are located.
When I place or receive a regular call the other person can barely hear me unless I speak less than 0.5 inches from the microphone. At less than 0.5t inches, they hear me good. At 2 inches extremely muffled or nill (this is the distance of the mouth in a regular call), and at 3 or more inches nothing at all.
Physically the mic however works fine when recording videos, so it has to be something non-physical. Also confirmed with a test on the Microphone at *#*#7378423#*#* where the both primary and secondary mics record fine.
In desperation I used flashtool and re-image the whole thing (even with erasing all data) with the latest XpriFirm ROM and tested it right after the successful image and without installing any 3rd party apps. The problem still there.
I also tried 3 different ROMs from different countries, but the problem still there.
Using a external wired headset mic works fine.
It seems, like a setting that is aggressively reducing the mic sensitivity just for the phone calls.
Ruled out 3rd party applications, mic physical damage or normal Android setting, I am really lost on to proceed from here!
Does anyone know what to do?
----
Model: E5823.
Bootloader has never been unlocked so no root.
Do you have the volume all the way up during the call? As in once call is started turn it up.
Idk how much it will help but have you tried to flash the soundmod? I have never had a problem with the mic other than a small echo on speakerphone. Also have you tried speakerphone wile in call? Might be something wrong with the phone apk, try a third party phone dialer? It wouldn't hurt to go through the sound menus to check everything as well.
Hi!
I doubt is a setting (in the Sound Effects options everything is off) since I flashed a stock clean ROM.
Did not know there are alternative dialers... I will study them today.
Regarding flashing the soundmod, can you do that without being rooted? If so, i'll search in how to do it too.
Cheers and thanks from just a couple of dozen miles south of you Sagnasty.
Have you tried to change the value of microphone sensitivity, although the option is in the Settings / Sound and Notification / Accessory Settings - turn mic sensitivity to high and see how it is then in a conversation?
The Speakerphone as suggested by civicsr2cool was surprising... the mic just picks up voice just fine from the distance in that setting!!
Then I just played with those mic sound settings as per Monipeev, (I did that days ago) but now it did something and in any sensitivity setting works fine... it must have been playing with this setting and the speakerphone one that may have unstuck some mic glitch.
Thanks so much guys... and two think I spend hours trying to solve this and even flashing ROMs! :victory:
Hi everybody. It happend to me with my Xperia Z5 compact as well - the mic did not work properly during call, but when I tested it offline the mic was OK. Playing with settings did not work as well as factory reset, so I ordered microphone spare part from China (ca 2$) and replaced it. Then the problem disappeared. I agree with polar_bay above it seems like mic glitch - I think my spare mic was slightly different from the original (maybe less sensitive) and that's it. Maybe also complete voltage drop (battery disconnection) helped to unstuck it.
My recommendations are:
1. play with mic settings (sw)
2. open the phone and disconnect the battery for a while (1 minute)
3. place small&thin absorber between mic and hole in phone case
4. replace microphone
hi, I have just bought another used xperia z5 compact as my other device has gotten old. after I received the new one I almost directly rooted it installed twrp and flashed lineageos 17. after a while I recognized that the microphone is not working during calls, only if the speaker is enabled. also when i want to record audio or use the tuner it doesn't work.
is there any chance to find out if it is a hardware problem or if it can be solved by some setting or so, be it coding?
thanks for any hints!
So im about to pass on my Note 8 SM-NH950F to my mum who is hard of hearing and have lived with what id consider to be relatively low call volume meaning unless i receive a call in a quiet room its very hard to hear the person, anyhow ive tried all of the speaker boosting apps, clearing caches etc and cleaning the earpiece grill nothing has worked, so i was wandering what can i do as i see that the option to increase incall volume in the settings has been removed and any hearing aid option in the accessibility isn't there at all either, i was wandering is there anyway to increase the earpiece volume using a service menu code or something as i need this sorted ?