I HAVE THE SPRINT TOUCH PRO STOCK ROM.
A WHILE AGO I REGRETABLY INSTALLED [ezInput 2.1]
[http://mylostblog.altervista.org/software/freeware/per-htc/htc-freeware-htc-keyboard-ezinput-21]
WHEN I DID THE SOFT RESET MY DEVICE GOT STUCK ON THE "TOUCH PRO SCREEN WITH Rom/Radio... info at the bottom.
I've tried several different things to try and make it work.
1. took out the battery and restart.
2. take out the memory card (where i installed) then baterry and restart
3. tried to connect to laptop (nothing)
notes: power button doesn't do anything
when i call my phone the LED light flickers for incoming call,
but, cannot answer.
tried searching for solutions on xda
http://forum.xda-developers.com/showthread.php?t=446719
i dont have "insurance" so i just cant get a new one
CAN ANYONE HELP ME WITH THIS PROBLEM???
NEW MESSAGE POPPED UP: the device is unable to boot beacuse either you have turned off the device incorrectly or tried to install an application from an untrusted source. press the volume up to reset your device or press any other button to cancel. this operation will delete all your personal data and restore the device to its factory settings.
You have to hard reset the device, like the message stated. If that doesn't do the trick, boot it in tricolor mode and reflash the ROM.
<SOLVED>
Problem solved. Factory reset. Good thing i had back-up.
Hi guys,
My new I9300 is a UK O2 locked phone.
After I got it , I did flash several famous ROMs, like Android Revolution HD, Omega, WanamLite and etc.
THEN, weird thing happened! At the end of ALL ROM's first boots, 4 apps were re-installed automatically, they are Music(Official Top 40), Amazon MP3, eBay and O2 Space.
I tried tons of ways to erase this, like full wipe date/cache/system...., I even use ARHD's Super Wipe to do so. However, nothing changed, they still appeared there
I can't find where are they and why does this happen.
Can you guys help me?
Thanks a lot!!
(PS. I have already use GalaSim Unlock my phone, but nothing changed after that. )
Nobody knows?
Looking forward to help....
THx
You need to Hard Reset your phone before and after flashing any ROM.
So in your case just do a hard reset now and will get rid of the o2 apps.
Hard Reset:
-Turn off your phone
-Press and HOLD Volume UP and Home button and press Power button while holding the other two.
-Wait till you will see the Android logo and release all buttons.
-Wipe data and Factory reset using the volume buttons and the power button( as Select )
-After you wipe data and factory reset , just press power button and phone will reboot.
And with this you will get rid of the o2 apps.
Hi all. Hoping someone can help with this issue:
The screen on my phone died and VZW has sent a replacement, but I need to return the defective unit and am trying to figure out how to wipe it when I can't see anything or use the screen for touch. Any ideas?
I found the following suggestion for someone with a similar problem on an HTC Wildfire. Anyone know if it should work on a Galaxy Nexus? Thanks!
"You can also perform a factory reset straight from hboot, just boot your phone to bootloader ( pull out battery, insert it back in, hold vol down and press power button ). Now when you are ( hopefully ) in bootloader, all you have to do is wait 30 sec ( it will check sdcard for possible files to flash ), and then press volume down 3 times, then just hit power button. It should reboot once to standard recovery ( to perform a wipe ) and once again to system, you should be able to hear startup sound if everything went OK."
Hello, I've had my Alpha for about a month now. Got it for a great deal thru AT&T. It's been working fine... until it got the 5.0.2 Lollipop update. UGH. now its freaking out and half the functions dont seem to be working correctly, The phone app locks up, the lockscreen freezes and displays a black bar at the top, youtube videos crash the phone, and part of my touchscreen stopped responding! Please note NOTHING was wrong with the phone until after this update. the phone has never been dropped or been near water. Any ideas on how to fix this, or do I need to get ATT to replace the phone? it's brand new... i dont want a refurb and thats probably what they're gonna try to stick me with so I'd rather try and fix it. I've already performed a master reset, did absolutely nothing.
Please try to factory reset, but you will lose all of the data (before copying all the necessary information).
Turn off the phone. Then press the buttons: volume+ + home + power for about 8 seconds. You will be in recovery mode.
Then, use the volume+ and volume- select "wipe data/factory reset" and press the power button, and then select Yes and power again.
Then you also do the same for "wipe cache partition".
Then "reboot system now".
Hopefully someone can help me, my child has a Pendo Pad 7 Model no.PNDPP44QC7 with Kitkat 4.4 and it ended up with lots of malware/viruses and barely usable. This tablet only has a power button and no other buttons so I did not know how to boot into recovery mode to do factory reset and after trying reset through settings which made no difference so I gave the device ROOT access so I could try and delete the malware etc but of course i did not do any sort of backup and did not add CWM or TWRP recovery. I ended up deleting something wrong and now the device just hangs on the Pendo logo screen. I have since worked out how to boot into Recovery Mode and also Fastboot mode now but a bit too late I tried to do a wipe data/factory reset and this made no difference still hangs on Pendo logo.
I can't seem to find a CWM or TWRP image file to suit the tablet and possibly try putting tablet into fastboot mode and using ADB on computer and flash the recovery to tablet. ???
in recovery mode options i get are
apply update from ADB
apply update from sdcard
apply update from cache
wipe data/factory reset
wipe cache partition
backup user data
restore user data
but i can not seem to find any correct files to work with this tablet any help to get this tablet working again would be much appreciated Thanks
Good day! how did you manage to boot into Recovery Mode or Fast Mode?
After pressing the power button and seeing the display turn on. Keep spamming the power button and a menu will pop-up on screen with boot options. Short press of the power button cycles through the options, long press selects the option.
Mine was also stuck on a boot loop, even though I had not played around with any settings or tried to root etc. I was able to revive it by going into recovery mode and doing a factory reset.
Hey OP I've got hold of the same tablet I'm working on getting a rom dump atm. Bare with me I'll try and send a link for the img. If u can get into recovery mode where u can update zip. That's good if not try and via pc. Once u have a link to the tablets boatloader, rest is history.
Hi,
Wondering if I can follow up on this.
Mine is stuck on the PENDO boot screen, and I have tried the reset button, as well as the se commands PENDO suggested....
1. Press On/Off Switch (Power), wait for the Pendo Logo start up screen, and then press On/Off Switch (Power) twice right away.
2. Factory mode menu comes out after 10 seconds, two fingers touches panel together to move to select the one like the following picture shows (no need to understand the Chinese words, just follow through as what the picture shows)
3. Press On/Off Switch (Power) and the following picture below will show, press On/Off Switch (Power) again to proceed on Recovery Mode, and wait for system to restart.
Unfortunately, nothing still happens.
ADB will not reveal what device it is, nor will Win 10 recognise the device for it to show in Device Manager or connected devices.
Windows responds with a ding ding, but nothing shows up.
I am stuck, and any info gladly accepted.
Thanks
bump please
ozviewer said:
Hi,
Wondering if I can follow up on this.
Mine is stuck on the PENDO boot screen, and I have tried the reset button, as well as the se commands PENDO suggested....
1. Press On/Off Switch (Power), wait for the Pendo Logo start up screen, and then press On/Off Switch (Power) twice right away.
2. Factory mode menu comes out after 10 seconds, two fingers touches panel together to move to select the one like the following picture shows (no need to understand the Chinese words, just follow through as what the picture shows)
3. Press On/Off Switch (Power) and the following picture below will show, press On/Off Switch (Power) again to proceed on Recovery Mode, and wait for system to restart.
Unfortunately, nothing still happens.
ADB will not reveal what device it is, nor will Win 10 recognise the device for it to show in Device Manager or connected devices.
Windows responds with a ding ding, but nothing shows up.
I am stuck, and any info gladly accepted.
Thanks
Click to expand...
Click to collapse
not working in my pendotab window 8
Hi,
I could get no further with mine, the same as you.
I contacted Pendo Support, and explained it would work but not boot, I even asked for the image file so I could reload it in recovery mode, however, they did not have access to it, the Chinese manufacturer had not made it available to them.
As I described it was not damaged, but simply not working, they agreed to send me a replacement, even though it was out of warranty, as really, as I said to them, it was not fit for purpose.
I had to send the old one back, but they sent me a satchel in which to do so, at no cost to me.
They sent me the new one very promptly.
Hope is not lost,
Someone has finally manage to extract the factory ROM for the pendo PNDPP44QC7. Just search the model number on needrom.
phoenixemer.blogspot.com.au/2017/04/pendo-pad7-pndpp44qc7.html
password : emerlitspendotab7
TWRP custom recovery
drive.google.com/open?id=0B3k_2dFOmDBGRmljV3JuSUZiUkU
I tried to upgrade a similar device to 5.x, some changes, but some options now not working I have a clone Q88H device, A33 quadcore processor 7" clone. Kernel 3.4.39, firm ware 2.1 Need to go back to 4.4.2 w latest update. Hopefully Play store will work again, as I need it. That, or change to windows version. advice pls?
drusid said:
Hope is not lost,
Someone has finally manage to extract the factory ROM for the pendo PNDPP44QC7. Just search the model number on needrom.
phoenixemer.blogspot.com.au/2017/04/pendo-pad7-pndpp44qc7.html
password : emerlitspendotab7
TWRP custom recovery
drive.google.com/open?id=0B3k_2dFOmDBGRmljV3JuSUZiUkU
Click to expand...
Click to collapse
Please i dont have a needrom account i cant download plz who Can send me the direct link to m'y account