Hello i have a samsung j3 2016 and when i put usb in pc wont install driver MTP failed error code 10
i used a lineage software and i wanted to recovery factory reset and now i cant do anything if i dont do again that with Lineage but i cant because on screen just Samsung Galaxy j36 write and nothing happen. i use windows 7 btw.
More testing.
Related
HI
i have a very big problem
After I setup cm12 ROM
i had no root access
Whatever I tried, but I couldn't find anything
Then I rebooted my device
And the device can't access recovery
And can't start up just the galaxy s3 logo over and over
The problem that my USB input is corrupted for 7 months now!!!
So is there any way that i can reset my device even a hard way or something
As computer Odin won't work as I can't connect my device to my PC
PLEASE I NEED HELP FROM PROS
I got into a bootloop yesterday with no reason, and I couldn't fix it , so I decided to do a clean flash.
After I wiped the partitions, I connected my phone to my Windows 10 PC and it says "USB device not recognized", and I installed all necessary USB drivers but still it is not working, and I couldn't turn on the device since no operating system is installed.
Any help would be highly appreciated.
(I'm using Samsung Galaxy Core Prime (SM-G360H) on CM 13. )
Thanks!
I my honor 5x KIW-L24 is stuck in a bootloop for approximately 4months now and I have no idea how to fix it. I had installed cyanogenmod 13 onto it and replaced the recovery with the cyanogenmod one. Whenever i boot my phone it doesnt even go past the logo part. My computer doesnt even detect or recognize the phone!! ((
vyarngnork said:
I my honor 5x KIW-L24 is stuck in a bootloop for approximately 4months now and I have no idea how to fix it. I had installed cyanogenmod 13 onto it and replaced the recovery with the cyanogenmod one. Whenever i boot my phone it doesnt even go past the logo part. My computer doesnt even detect or recognize the phone!! ((
Click to expand...
Click to collapse
If you have adb installed use it and flash twrp latest one off there site for kiwi. Once done do a full wipe under advanced then connect phone to PC and see if it pops up should and copy latest copy of Lineage cm 13 also gapps if needed.
Sometimes windows 10 might be a booger and not detect your phone and there is a mtp inf file u might have re install to get it to detect it.
Today,I was trying to upgrade my samsung tab.The upgrade instruction shows me how to upgrade using Odin 1.7v.
When I in downloading mode,Odin say FAILED! to me.I disconnected my tab and computer safely.Suddenly,my tab shows the computer and phone image.I was google this problem and i know this is soft brick.After that, my tab wont show anything if it not connected to the power.It is not work on my computer too so my computer cant detect my tab so odin and heimdall not found my device.
My questions is:
Why did my phone not connected to my tab.
Sorry for any wrong spelling because im malay
Hi , let's be clear
You can't flash like that any firmware for your device !
You must flash just firmware for the region for which the phone is made that why Odin will fail .
I understand that on your device once you had disconnected from pc is showing now Computer and phone icon with usb or what ?
Did you tried again to put your device into Download mode ?
samsung pt 1000
Sorry for changing matters,but i have a serious problem on my android tab. i wanted to upgrade my samsung galazy tab p1000 from 4.4 to 5.01, using twrp,i mistakenly installed the gapps instead of the custom rom, the twrp then rebooted and when i tried to flash the custom rom again,it says it cannot mount storage,cannot mount data and system... i then flashed cwm recovery on it,but its stills says cannot mount storage,how can i fix it,and also how can i revert back to twrp, twrp isnt available for this samsung,but it was on it by default....pls help
I had installed lineage os 19 unofficial on my samsung galaxy a10 and just "why not let lineage put their own shenanigans in the recovery" ... aaand phone is stuck in bootloop rebooting itself after failed attempts to boot system.
*The phone has bootloader unlocked.
I have tried to boot into recovery and download modes via buttons but to no avail. Phone attached to pc doesnt seem to "connect" to phone while cycling. When connected to power it powers itself and continues boot looping.
I have bought an usb jig (haven't inspected the resistor inside) to maybe force the download mode and reflash it with stock firmware. But the results were different. When connected to phone it turns itself off, nothing happens and i can't turn on the phone while the usb jig is inserted. (I guess usb jig really works only on "some" phones) I heard there is an emergency download mode on various phones (which on some devices is easier like ones with qualcomm cpu with edl cable and harder on other). Mine phone has exynos cpu and there also are hints over the internet there depending of the PCB and motherboard there might be some edl test points.
If there is a need i can disassemble it.
Are you referring to >this< thread?
Well yes, but actually no. Same lineage os file different tutorial.
Download and Install Lineage OS 19 for Samsung Galaxy A10 (Android 12)
In this tutorial, we will guide you to install the latest Lineage OS 19 on the Samsung Galaxy A10 (a10) smartphone. We have given the
www.getdroidtips.com
The only part i done was flashing the os and then reinstalling the ZIP with ticking the option to tinker with recovery. Now that i think about it i may have overreinstalled the os without clearing any cache or data.