CMDMOTO PRESENTS
SM-900P Sprint Galaxy S5 Stock-ish with Tidbits[
DOWNLOADS,MODS & RECOMMENDATIONS
AT BOTTOM OF MAIN POST
CHANGE-LOG IN POST #2
HELP ME POST #3
Read Before posting Issues
JUST LOOK HERE 1ST!
PREREQUISITE:
Please update to G900PSPT3CQD1 firmware which can be downloaded from here by using Samsung Odin
MD5: 5c77ee6792da8dd259d0b48bef27e17c
I can not guarantee that you will not have problem if you are on another firmware/modem/bootloader
OK THE DISCLAIMER PART:
I can't be held responsible for the effects of this software, it was designed for testing purposes and fun.
Please make a backup, make sure you have a computer handy with odin
Please take sometime to read all documents before proceeding, you've been warned.
Installation Steps:
1.) Download desired Rom Version from below download link(s)
2.) Place Rom preferably on external SD card
3.) Reboot device into recovery either using Busybox or from device powered off method. (instructions in post#3)
4.) Once in recovery its HIGHLY recommended to install on a clean device. Select Wipe, Then advanced,
put check marks next to System, Dalvik-Cache, Data, Cache
5.) Recommended but NOT necessary: Once wipe is completed, back up one step and choose FORMAT DATA, it will require you to type YES to complete.
6.) When completed return back to Main TWRP screen, Click Mount and make sure System and Data are mounted.
7.) Choose Install then Navigate to where you placed Rom ( You made need to choose SD as the storage location if you put on SD )
9.) Install Rom and wait for it to complete. Once done, wipe Dalvik-Cache/Cache then select reboot and WAIT.
10) Most importantly ENJOY!
Downloads
G900PSPT3CQD1 ROM's
Version VA2
(QD1 Deodexed/Magisk SU/Busybox Added/ su.d added/init.d support/Knox and Itson removed/DE-BLOATED)
Download: https://www.androidfilehost.com/?fid=889964283620772109
MD5: 6a80f263087bf12000a224f7b2fc53f1
Version VA1 (QD1 Deodexed/Magisk SU/Busybox Added/ su.d added/init.d support/Knox and Itson removed/ FULL BLOAT)
Download: https://www.androidfilehost.com/?fid=745849072291694693
MD5: 8c8283610bc703e62ffce7dd561117d7
NOTICE:
The install process will take some time (Approx 15-20 Min), later builds have zip-align at boot to help with de-odexed speeds.
Please help each other out, I will not always be able to answer questions due to having a family, school, work and starting a business. Please be easy on me because this is my first time to build and I am very new to this. Be aware I do NOT support other images/kernels/mods, and i'm unable to help with issues you have if you choose that route. Please post in the appropriate page where you got the images/kernels/mods for best support!
Bugs
None known at this time
Developer(s):
@cmdmoto
Contributor(s) and credit to :
@ViPER520 and @zhuhang for Viper4Android! (An absolute must have for any ROM!)
http://vipersaudio.com/blog/
Please remember to use “Compatible Mode” if you inserted other sound mods.
@topjohnwu for Magisk!
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
@Chainfire for SuperSU!
@SuperR for his wonderful Kitchen!
Built Using: SuperRs Kitchen. Great Tools For Any DEV!
XDA:DevDB Information
[ROM][QD1][6.0.1]14Dec2017] Stock-ish Plus Tidbits, ROM for the Sprint Samsung Galaxy S5
Contributors
cmdmoto
ROM OS Version: 6.0.x Marshmallow
ROM Firmware Required: G900PSPT3CQD1
Version Information
Status: Testing
Created 2017-12-14
Last Updated 2017-12-14
Reserved
One More
Strange....the rom is running nicely, except for the Wifi. It remains connected for a few seconds (maybe a minute), then disconnects. I have rebooted, and I have forgot the wifi info and reconnected, both to no avail.
Can you use this for the things you would normally flash back to stock for (ie PRL updates)?
Couchy said:
Can you use this for the things you would normally flash back to stock for (ie PRL updates)?
Click to expand...
Click to collapse
Yes, You can use either VA1 or VA2
Hi @cmdmoto I just stumbled onto this thread and was wondering if you're still supporting this rom. It looks really interesting and wanted to give it a try. I noticed one mention of wifi not staying connected. Have you experienced this as well? Thanks for any info.
bytes2bits said:
Hi @cmdmoto I just stumbled onto this thread and was wondering if you're still supporting this rom. It looks really interesting and wanted to give it a try. I noticed one mention of wifi not staying connected. Have you experienced this as well? Thanks for any info.
Click to expand...
Click to collapse
My daughter actually uses this ROM and she has not experienced any of the issues that have been mentioned. Also, When an update is available, I will be updating the ROM.
cmdmoto said:
My daughter actually uses this ROM and she has not experienced any of the issues that have been mentioned. Also, When an update is available, I will be updating the ROM.
Click to expand...
Click to collapse
Thanks for the quick reply! I'm definitely gonna give it a try in the next few days. I have to update my baseband first. I dropped down to a lollipop baseband to try MOAR again for a bit. I had been on RR Nougat for quite some time prior to that. I'll keep you posted. What are the "extra tidbits"? Can't wait to find out!
bytes2bits said:
Hi @cmdmoto I just stumbled onto this thread and was wondering if you're still supporting this rom. It looks really interesting and wanted to give it a try. I noticed one mention of wifi not staying connected. Have you experienced this as well? Thanks for any info.
Click to expand...
Click to collapse
That wifi problem night be device specific (mine). Not sure what that's about.
Turns out it was the Magisk file that I was flashing. Started causing all sorts of trouble. Back on this rom with no root, and running properly. I really)y don't need root, so I'm not going to bother with that.
how can I install twrp recovery on marshmallow sprint s5?
i got another rom installed on my s5 but is the same CDQ1 can I still flash this rom???
torhect said:
how can I install twrp recovery on marshmallow sprint s5?
Click to expand...
Click to collapse
Same as in the past, use Odin, just be sure to uncheck in option reset, reboot.
doubledragon5 said:
Same as in the past, use Odin, just be sure to uncheck in option reset, reboot.
Click to expand...
Click to collapse
Ok thanks! Another thing! Which is the latest twrp version on s5 marsmallow Sprint? And i want to know if this is only a debloat touchiwz version? Or has tweaks?
torhect said:
Ok thanks! Another thing! Which is the latest twrp version on s5 marsmallow Sprint? And i want to know if this is only a debloat touchiwz version? Or has tweaks?
Click to expand...
Click to collapse
I believe that is the only one that is debloat. I was using MOAR 7.0, but switched to crdroid, because of not being able to receive MMS. I use. TWRP 3.2.1-0. Just make sure it is the Qualcomm (ktle) version.
doubledragon5 said:
I believe that is the only one that is debloat. I was using MOAR 7.0, but switched to crdroid, because of not being able to receive MMS. I use. TWRP 3.2.1-0. Just make sure it is the Qualcomm (ktle) version.
Click to expand...
Click to collapse
Mine is the sprint version of s5! I believe is the one required for installing this rom and i got installed the same 6.0 CQD1 stock firmware specified in the post. But i have to look for the right twrp version for my sprint s5.
How about battery life in this rom ? Is it better than stock roms?
torhect said:
Mine is the sprint version of s5! I believe is the one required for installing this rom and i got installed the same 6.0 CQD1 stock firmware specified in the post. But i have to look for the right twrp version for my sprint s5.
How about battery life in this rom ? Is it better than stock roms?
Click to expand...
Click to collapse
The one I mentioned in the last post is what you need. Go to this link top devices it will have G900P. https://twrp.me/samsung/samsunggalaxys5qualcomm.html
Screenshots?
Does this ROM have native hotspot enabled?
Related
This is a completely 100% stock rom built from the P5210XXUAMK8 base. It's in flashable zip format, but there is absolutely no tweaking done to this rom; its primary purpose is as a base for anyone wanting to build a mod rom for the P5210 WiFi, as well as being there for anyone who wants to return stock without odin.
As it is 100% stock it's fully bloated, odexed, and non-rooted. You can attain root by flashing root.zip (not included in this post, but it's in the main forum) thus, if you have any complaints, bring them to Samsung, not me. Flashing instructions and download link below.
Edit: I've now also posted a deodexed + rooted build. See download link below. No other changes have been made to this version besides deodex/root.
Flashing instructions:
-Full wipe (factory reset in twrp)
-flash ROM
-reboot, let sit for about 10 minutes
-You're now 100% stock. Enjoy!
Download links:
100% stock
Rooted/Deodexed
thanks! will keep this in a safe place in case needed
just changed hosts to mediafire due to problems reported with mega
Restl3ss said:
just changed hosts to mediafire due to problems reported with mega
Click to expand...
Click to collapse
Awesome, I let the mega dl run all last night to wake up to a dl error... Thanks for fixing the link.
just added a rooted/deodexed build.
Very good
Envoyé depuis mon GT-I9505 avec Tapatalk
Damn, your fast...
Good work Restl3ss, your a beast.
Restl3ss said:
just added a rooted/deodexed build.
Click to expand...
Click to collapse
These two zips should be helpful for my P5210. There was a zip before, I think from DutchDanny, but it didn't work. I'm going to keep them on my SD card. To anticipate others needs, do you have a thought to repeat the process for the P5200 and P5220? I'm sure those guys would appreciate this also and I'm thinking you have already done more than half the work.
kb8no said:
These two zips should be helpful for my P5210. There was a zip before, I think from DutchDanny, but it didn't work. I'm going to keep them on my SD card. To anticipate others needs, do you have a thought to repeat the process for the P5200 and P5220? I'm sure those guys would appreciate this also and I'm thinking you have already done more than half the work.
Click to expand...
Click to collapse
The p5200/p5220 versions are already up in the main thread
Restl3ss said:
The p5200/p5220 versions are already up in the main thread
Click to expand...
Click to collapse
I don't know what the main thread is any more. I assume you mean the Pimpdroid thread? There are ROMs for the other devices but I don't see the stock zip nor the deodexed rooted stock zip for the other devices on the Pimpdroid Thread. I was referring to the stock zips. Can you point me? I might be able to help someone sometime.
kb8no said:
I don't know what the main thread is any more. I assume you mean the Pimpdroid thread? There are ROMs for the other devices but I don't see the stock zip nor the deodexed rooted stock zip for the other devices on the Pimpdroid Thread. I was referring to the stock zips. Can you point me? I might be able to help someone sometime.
Click to expand...
Click to collapse
Tab 3 10.1 android development thread, found here http://forum.xda-developers.com/galaxy-tab-3/development-10
THANK YOU! I wanted to keep the tablet stock and just root it. This is exactly what I was looking for. Good work.
NyceHS said:
THANK YOU! I wanted to keep the tablet stock and just root it. This is exactly what I was looking for. Good work.
Click to expand...
Click to collapse
no problem
Restl3ss, I see that the version of firmware you used, P5210XXUAMK8, is a European version. I am just curious to know if there was a specific reason why that version was used? Would it possibly be due to difference WiFi frequencies available? I think there is some cross compatibilities in frequencies between the US and EUR.
I am sure you are busy, but would there be a future possibility to do the same to the US (Cellular South - XAR) version, P5210UEUAMK1?
Thanks for all you do.
Brian D said:
Restl3ss, I see that the version of firmware you used, P5210XXUAMK8, is a European version. I am just curious to know if there was a specific reason why that version was used? Would it possibly be due to difference WiFi frequencies available? I think there is some cross compatibilities in frequencies between the US and EUR.
I am sure you are busy, but would there be a future possibility to do the same to the US (Cellular South - XAR) version, P5210UEUAMK1?
Thanks for all you do.
Click to expand...
Click to collapse
I will not be making another version from the US version as there is no reason for it, the above firmware will work just fine on your device, including all available WiFi frequencies. What frequencies the device supports is defined by hardware, and there's no hardware difference between the US/EUR version. WiFi is a global standard, I assure you
Restl3ss said:
This is a completely 100% stock rom built from the P5210XXUAMK8 base. It's in flashable zip format, but there is absolutely no tweaking done to this rom; its primary purpose is as a base for anyone wanting to build a mod rom for the P5210 WiFi, as well as being there for anyone who wants to return stock without odin.
As it is 100% stock it's fully bloated, odexed, and non-rooted. You can attain root by flashing root.zip (not included in this post, but it's in the main forum) thus, if you have any complaints, bring them to Samsung, not me. Flashing instructions and download link below.
Edit: I've now also posted a deodexed + rooted build. See download link below. No other changes have been made to this version besides deodex/root.
Flashing instructions:
-Full wipe (factory reset in twrp)
-flash ROM
-reboot, let sit for about 10 minutes
-You're now 100% stock. Enjoy!
Download links:
STOCK-GTP5210-4.2.2.zip
Rooted/Deodexed
Click to expand...
Click to collapse
After I flash CMW or TWRP my P5210 frozen in stock recovery and I can not turn it off in any way.
After the battery is discharged, connect the tab to the power supply and I can turn it back on.
I can flash the rom deodexed / rooted with Odin?
Saludos
Cristian
Thanks for this great ROM !
Sent from Gallifrey using TARDIS
wow, can I use this to revert back my device sir ??
is the deodexed version faster than the normal stock?
Debloat Script
Anyone have a debloat script for this? Something like:
http://forum.xda-developers.com/showthread.php?t=2348095
?
Thanks. -- Bud
REMEMBER THIS IS AN ALPHA
Original Dual-Boot Patcher Thread http://forum.xda-developers.com/showthread.php?t=2447534
DISCLAIMER: We are not responsible for any issues, problems, or broken phones, which may have come from using any data or information you receive from this thread. Using anything here, will most likely violate your cell phone's warranty or contract. That is also your 100% responsibility, to know, and your responsibilty if you do. If you don't know what you are doing, or you think you do, and you brick your phone, or something POSITIVE OR NEGATIVE changes with your phone, it is all 100% your responsibility. Use the following data, information, and links at YOUR OWN RISK!
YOU MUST REMEMBER TO FLASH A MODEM THAT WILL ALLOW YOUR FIRMWARE BOOT UP IE; LS980(ZV8)(ZVC)
CURRENTLY ONLY LS980 SUPPORTED
VS/LS980 and D802 TESTED
Going To Secondary Rom from Primary {FIRST TIME}
Step 1. Assuming you already have a primary rom setup, patch your .zips using the .apk patcher and reboot into recovery
Step 2a. If you have a device that requires switching modems to boot AOSP and LG firmware do so now
Step 2b. Flash your patched .zips and choose to install as either Dual, or one of 3!!! Multi-Boot-Slots
Step 3. Reboot and Enjoy your multibooted devices!!
Step 4. Go and thank @chenxiaolong one more time!!
Going back To Primary Rom from Secondary [Vice-Versa]
Method 1: USE IF YOU DONT HAVE TO CHANGE MODEM
Step 1. Go Into Dual-Boot Patcher Apk
Step 2. Click On Primary Rom (If you set your kernel)
Step 3. Reboot
Method 2: USE IF YOU DO HAVE TO FLASH A MODEM
Step 1. Reboot into Recovery
Step 2. Flash the Modem for the rom you wish to boot into
Step 3. Flash the DualBoot Utility from below
Step 4. Choose the rom you wish to boot from the Utility
Step 5. Reboot Into Rom
YOU MIGHT HAVE TO RESTORE A BOOT.IMG TO SWITCH ROMS AS THE FUNCTION IS NOT FULLY DEVELOPED
DOWNLOADS
LG G2 MODEM DOWNLOADS THANKS @autoprime
http://downloads.codefi.re/autoprime/LG/LG_G2/G2_modems
LATEST SNAPSHOT DUALBOOT PATCHER APK[/U @chenxiaolong
https://snapshots.noobdev.io//
Dual-Boot Switcher.zip Alpha
USE THIS TO SWITCH BETWEEN ROMS: THANKS @chenxiaolong
https://drive.google.com/file/d/0B1d_Il6yTO73U3dtUTMwby1hWWc/view?usp=sharing
Working rom combinations
LS980:
Me: KitKat Bootloader/Primary-CloudyFLex (ZVC)/Secondary-VanirAOSP (ZV8)
D802:
@vPro97 Bootloader/Primary-CloudyFLex/Secondary-VanirAOSP
Testers pm me and we can hangout
Tutorials (Eventually)
Patching ROM
Patching GAPPS
https://docs.google.com/file/d/0B1d_Il6yTO73eHZRbW1SWE9GZUk/edit?usp=docslist_api
Just asked permission to put apk downloads in my thread for ease of access. Also asked if it would be possible to use an automatic modem switcher depending on if you are on stock KK or LP ROM which needs jb modem.
Wow this is fantastic! Really great news! I'm stoked. I can't help with testing but this has to be the best thing I have read all day.
I have a D802 and everything (except for 4.2 roms) uns on the KitKat modem, so I think it would be easier for D802 users due to no modem change.
vPro97 said:
Wow this is fantastic! Really great news! I'm stoked. I can't help with testing but this has to be the best thing I have read all day.
I have a D802 and everything (except for 4.2 roms) uns on the KitKat modem, so I think it would be easier for D802 users due to no modem change.
Click to expand...
Click to collapse
exactly!! Im so glad someone has finally commented on this. I am also in the process of seeing about dual-booting roms other than slim. Just have to do a little more work. lol and hopefully lollipop on dualboot
ktetreault14 said:
exactly!! Im so glad someone has finally commented on this. I am also in the process of seeing about dual-booting roms other than slim. Just have to do a little more work. lol and hopefully lollipop on dualboot
Click to expand...
Click to collapse
Yeah exactly. Dual booting lollipop and a stable stock rom with great camera and stability would be the ideal scenario. I just don't quite have the time to test it out (well it's mostly if something goes sour) but I'll be waiting for feedback from other people before jumping into it. But once again it's great you found and tried this.
No problems at all with the slim ROM that he provided through the automatic apk patcher. Or the gapps. All installed correctly to the correct spots /system/dual/ and /data/dual/ going to be testing lollipop though. I tried doing it myself lol. See how it goes.
Is this dual boot only avaliable for D800? I don't see the option for a D802
vPro97 said:
Is this dual boot only avaliable for D800? I don't see the option for a D802
Click to expand...
Click to collapse
It shows as only available for d800. As I stated I am using a LS980 and all worked fine, just had to switch modems.
Why don't I use other ROM?
marchino123 said:
Why don't I use other ROM?
Click to expand...
Click to collapse
Can you be a little more clear to your question please?
Why can't I use other ROM?
Nice this dualbooting although we can replace it with multirom if LG finally unlocks the bootloader or if somebody hacks the bootloader. This reminds me of the lg optimus 2x dualboot method also using a dualboot app switcher.
It's a nice alpha thing but I wont be using it cause 16gb and a full system/internal storage isnt so nice with dualbooting but maybe I will look into the script/app later to add more support or update it a bit :]
marchino123 said:
Why can't I use other ROM?
Click to expand...
Click to collapse
Because any other ROM that isn't SLIMRom isn't directly supported in the apk version of the patcher. It would have to be patched manually. Refer to original Dev thread at top of Op
Thank you for the information
Great news! Just patched a 5.0 ROM using the latest snapshot of the apk. Flashing and will report back
This is the error I get when patching 5.0 files
Mhhh???
so I got this galaxy s5 (free) to replace the S4 I had.. I'm on AT&T and the S5 is a T-Mobile device.. I unlocked and am currently using on AT&T without any issues.. I tried Cyanogenmod 12 on it.. had way too many Bluetooth music issues.. so I switched back to a rooted t-mobile stock.. which is terrible.. bluetooth music works great but everything is is painfully slow.. so I want to find a good fast custom rom (that also has proper bluetooth music support).. With so many device versions and so many custom roms I'm just a bit perplexed.. I found some that are debloated stock roms which seem like that would be good. but I'm just a bit confused on what parts I need to have as "t-mobile g900t" and which parts I don't have to have that way? so yeah this is a bit of a newbie question (even though I have run 4 or 5 custom roms in the past (original galaxy s and my s4 both had custom roms). .but those were always at&t devices on at&t network.. so was an easier choice..
at any rate.. looking for some tips on how to best find the right rom.. Would love to do this today/tomorrow.. avoid messing with the phone during the work week..
Thanks in advance!!
Gary
Try the latest stock ROM for the phone. Many of us were having issues with lag with prior 5.1.1 ROMS. The latest ROM has fixed all these issues. Very snappy.
i feel like i remember seeing bluetooth/audio fixes & updates in the CM13 nightly changelogs, you also didnt specify which CM 12 you installed... the last 12.1 snapshot from october or the last nightly from december?
You can run whatever rom you want. If it works with KLTE it works on your phone. Check the S5 unified development. Cyanogen has always been crap on this phone, probably always will be. Try an AOSP based one like Tesla or TipsyOS (probably won't find them on this site, they post all of their roms on their Google+ page)
Unfortunately the only Marshmallow available for this phone so far is CM-13 based so it's also crap and full of bugs...
To be honest, no ROM you find will be perfect. The most stable thing I've found is to just use a rooted stock ROM and debloat the hell out of it then run Google Now launcher or Nova and forget that you have a Samsung device for a while, until the next OTA comes out and you have to do the process over again.
Sean89us said:
You can run whatever rom you want. If it works with KLTE it works on your phone. Check the S5 unified development. Cyanogen has always been crap on this phone, probably always will be. Try an AOSP based one like Tesla or TipsyOS (probably won't find them on this site, they post all of their roms on their Google+ page)
Unfortunately the only Marshmallow available for this phone so far is CM-13 based so it's also crap and full of bugs...
To be honest, no ROM you find will be perfect. The most stable thing I've found is to just use a rooted stock ROM and debloat the hell out of it then run Google Now launcher or Nova and forget that you have a Samsung device for a while, until the next OTA comes out and you have to do the process over again.
Click to expand...
Click to collapse
much improved deep sleep battery means crap & full of bugs? i'm over a week behind on nightlies & there arent that many bugs... http://www.cmxlog.com/13/klte/ things are improving all the time, only CM 12.1 is stuck... but the last december nightly isnt buggy either
Sort of forgot about this thread. first Thanks for the replies.. So I have been using CM13 since I posted this.. and this has great for speed.. but BlueTooth continues to suck.. no matter what bluetooth device I use with this Rom it skips and stutters. I've finally had enough.. it's been quite a long time with this issue so time for me to switch.. I will try one of the rooted stock roms and debloat it with one of those tools.. thanks again everyone!
gpinkham said:
Sort of forgot about this thread. first Thanks for the replies.. So I have been using CM13 since I posted this.. and this has great for speed.. but BlueTooth continues to suck.. no matter what bluetooth device I use with this Rom it skips and stutters. I've finally had enough.. it's been quite a long time with this issue so time for me to switch.. I will try one of the rooted stock roms and debloat it with one of those tools.. thanks again everyone!
Click to expand...
Click to collapse
Go to the international s5 site look at Tamirda's phoenix rom . It's 6.0.1 mm very snappy very few bugs. Very moddable. Just load a stock mm rom from here first than so you have the proper bootloader and modem. After installing you feel like you got a mini s7. Good good.
Sean89us said:
You can run whatever rom you want. If it works with KLTE it works on your phone. Check the S5 unified development. Cyanogen has always been crap on this phone, probably always will be. Try an AOSP based one like Tesla or TipsyOS (probably won't find them on this site, they post all of their roms on their Google+ page)
Unfortunately the only Marshmallow available for this phone so far is CM-13 based so it's also crap and full of bugs...
To be honest, no ROM you find will be perfect. The most stable thing I've found is to just use a rooted stock ROM and debloat the hell out of it then run Google Now launcher or Nova and forget that you have a Samsung device for a while, until the next OTA comes out and you have to do the process over again.
Click to expand...
Click to collapse
Sent from my SM-G935F using XDA-Developers mobile app
inspired55 said:
Go to the international s5 site look at Tamirda's phoenix rom . It's 6.0.1 mm very snappy very few bugs. Very moddable. Just load a stock mm rom from here first than so you have the proper bootloader and modem. After installing you feel like you got a mini s7. Good good.
Click to expand...
Click to collapse
Question.. I currently have CM13 loaded in this phone.. so do I still need to do the "Just load a stock mm rom" first? I assumed I already had the proper bootloader and modem..
thanks!
gpinkham said:
Question.. I currently have CM13 loaded in this phone.. so do I still need to do the "Just load a stock mm rom" first? I assumed I already had the proper bootloader and modem..
thanks!
Click to expand...
Click to collapse
If you have the mm bootloader and modem installed just wipe and flash. But I believe cm 13 could be ran on the lp bootloader. I odined the stock tar first that way you know all the partitions are proper. Than Odin Twrp 3 0.0 . Make sure you back up your data from internal storage because when you Odin factory package it wipes phone storage. I learned this the hard way lost a bunch of pictures lol anyway I found this to be the best way. Hoping this helps....
Sent from my SM-G935F using XDA-Developers mobile app
inspired55 said:
If you have the mm bootloader and modem installed just wipe and flash. But I believe cm 13 could be ran on the lp bootloader. I odined the stock tar first that way you know all the partitions are proper. Than Odin Twrp 3 0.0 . Make sure you back up your data from internal storage because when you Odin factory package it wipes phone storage. I learned this the hard way lost a bunch of pictures lol anyway I found this to be the best way. Hoping this helps....]
Click to expand...
Click to collapse
1. is there a way to tell which bootloader I have?
2. I'm running teamwin.. I assume that's fine for flashing Phoenix but does one really need Odin?
3. I had a rooted stock image before I installed CM13.. (the stock image was so dang slow.. forget which.)
thanks again!
Gary
gpinkham said:
1. is there a way to tell which bootloader I have?
2. I'm running teamwin.. I assume that's fine for flashing Phoenix but does one really need Odin?
3. I had a rooted stock image before I installed CM13.. (the stock image was so dang slow.. forget which.)
thanks again!
Gary
Click to expand...
Click to collapse
Get any phone info app and check and see if your bootloader ends in pe1 if it don't you don't have mm bootloader. Teamwin is twrp just make sure it's version 3.0.0 that version seems to do best with the phoenix rom.
Sent from my SM-G935F using XDA-Developers mobile app
inspired55 said:
Get any phone info app and check and see if your bootloader ends in pe3 if it don't you don't have mm bootloader. Teamwin is twrp just make sure it's version 3.0.0 that version seems to do best with the phoenix rom.
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
Sorry for eavesdropping but I dont think that PE3 came yet, either via OTA or on sammobile.
Correct me if I am wrong
Sent from my SM-G900T using XDA-Developers mobile app
S.N [user=2501176 said:
@.k.[/user]3;67525688]Sorry for eavesdropping but I dont think that PE3 came yet, either via OTA or on sammobile.
Correct me if I am wrong
Sent from my SM-G900T using
I'm sorry you are correct I meant pe1 pe3 is for the Note 4. I've been working with a friends note 4 past few days. Thanks for catching my error . Hate giving wrong advice... original post edited...
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
inspired55 said:
Get any phone info app and check and see if your bootloader ends in pe3 if it don't you don't have mm bootloader. Teamwin is twrp just make sure it's version 3.0.0 that version seems to do best with the phoenix rom.[/URL]
Click to expand...
Click to collapse
thanks for sticking with me on the all the newbie questions.. bootloader version reported as G900TUV1FOG6.. later in the list it shows Latest Firmware: G900TUVUGPE1/G900TTMBGPE1/G900TUVU1GPE1.. so at first I was thinking I was ok.. but that second entry had me wondering.. (dang.. just noticed this was never submitted (from 6/28).. oh well)..
ok.. So I assumed I'm good to go.. installed the latest TWRP (3.0.2).. wiped the data area and tried to flash Phoenix.. It starts installing Aroma.. and within a couple of seconds the phone reboots back into TWRP.. did this a few times.. rebooting into the OS gets me a new Cyanagenomod not Phoenix.. figure I must be missing a step somewhere (or have something that is preventing Phoenix from installing).. thoughts?
thanks again!!
gpinkham said:
ok.. So I assumed I'm good to go.. installed the latest TWRP (3.0.2).. wiped the data area and tried to flash Phoenix.. It starts installing Aroma.. and within a couple of seconds the phone reboots back into TWRP.. did this a few times.. rebooting into the OS gets me a new Cyanagenomod not Phoenix.. figure I must be missing a step somewhere (or have something that is preventing Phoenix from installing).. thoughts?
thanks again!!
Click to expand...
Click to collapse
I think you still don't have the correct bootloader . The firmware is mm because your using CM13. The easiest way to get it done for sure is to odin the official MM firmware. Than install Twrp 3.0.0 flash superuser to have root . Reboot in recovery and flash phoenix rom v12.0 than the 12.6 update. This may take extra time this way but all the partitions will be correct. Or odin bootloader in BL slot and modem in cp slot . Don't set for auto reboot pull battery back into download mode Odin Twrp pull battery. Reboot into recovery than flash superuser. Than flash phoenix. Good luck
Sent from my SM-G935F using XDA-Developers mobile app
inspired55 said:
I think you still don't have the correct bootloader . The firmware is mm because your using CM13. The easiest way to get it done for sure is to odin the official MM firmware. Than install Twrp 3.0.0 flash superuser to have root . Reboot in recovery and flash phoenix rom v12.0 than the 12.6 update. This may take extra time this way but all the partitions will be correct. Or odin bootloader in BL slot and modem in cp slot . Don't set for auto reboot pull battery back into download mode Odin Twrp pull battery. Reboot into recovery than flash superuser. Than flash phoenix. Good luck
Click to expand...
Click to collapse
OK.. you may be right.. I downgraded TWRP to 3.0.0 and the install started working fine.. but now the reboot into Phoenix has been going for about 35 mins.. I know it can take some time but that seems extreme.. will wait a bit longer and if it doesn't work I'll try the steps you listed above..
thanks again
Gary
inspired55 said:
I think you still don't have the correct bootloader . The firmware is mm because your using CM13. The easiest way to get it done for sure is to odin the official MM firmware.
Click to expand...
Click to collapse
Well I used Heimdall.. flashed a bootloader image MM.. now the phone seems to be completely bricked.. get the samsung galaxy s5 screen keys light up.. and just sits there.. time to toss it I guess. .(was a freebie anyway)..
gpinkham said:
Well I used Heimdall.. flashed a bootloader image MM.. now the phone seems to be completely bricked.. get the samsung galaxy s5 screen keys light up.. and just sits there.. time to toss it I guess. .(was a freebie anyway)..
Click to expand...
Click to collapse
Got the phone back to CM13. so back to crappy bluetooth music streaming.. ha.. oh well I will give this try again some other day..
thanks again for the help!
Gary
gpinkham said:
Got the phone back to CM13. so back to crappy bluetooth music streaming.. ha.. oh well I will give this try again some other day..
thanks again for the help!
Gary
Click to expand...
Click to collapse
Gary look in this general section for the post that instructs you how to install factory mm. Follow the guide. Google to see how to install factory tar files using Lunix . I'm guessing my instructional writing skills leave something to be desired lol . Once you have the factory mm up and running install Twrp flash superuser reboot. Than reboot into recovery flash phoenix rom. Good good
Sent from my SM-G935F using XDA-Developers mobile app
Just got given an i9100 today with a faulty USB port. A new one is coming in the mail, but ebay is slow.
It charges fine so it can be used, just no data connection over USB (connects and disconnects, cleaning the port did not help)
Currently on 4.1.2, i9100XXLS9
I can get files to it via SD card, is there any methods to root it or get TWRP on it that can be done before i fix the USB port?
Mussels84 said:
Just got given an i9100 today with a faulty USB port. A new one is coming in the mail, but ebay is slow.
It charges fine so it can be used, just no data connection over USB (connects and disconnects, cleaning the port did not help)
Currently on 4.1.2, i9100XXLS9
I can get files to it via SD card, is there any methods to root it or get TWRP on it that can be done before i fix the USB port?
Click to expand...
Click to collapse
Mobile Odin
noppy22 said:
Mobile Odin
Click to expand...
Click to collapse
looks like its working, its loaded a stock rom and has its many options. How do i add a custom recovery with it? I'm fuzzy on the S2, since it combined kernel + recovery.
Mussels84 said:
looks like its working, its loaded a stock rom and has its many options. How do i add a custom recovery with it? I'm fuzzy on the S2, since it combined kernel + recovery.
Click to expand...
Click to collapse
You could use any kernel in .tar format to load a custom recovery. Philz or siyah kernel are normally used to root the s2, but I think any will work.
Alternatively you could download philz kernel in .zip format. You just need to find the correct kernel for your firmware HERE.
This guide is one of many for basic info on rooting etc
i figured it out, got philz on there for now.
Thanks for the idea of mobile ODIN, i tried flashify. TWRP manager, Rash, and terminal commands and none of them worked... mobile ODIN did however.
Now i get to read up on the custom roms available for the S2
Any recommendations?
Mussels84 said:
Any recommendations?
Click to expand...
Click to collapse
Marshmallow is quite stable now on the S2, so is Lollipop. Any of the recent MM roms are pretty good. I've been running AICP, Oct M, and AOKP recently(MM) and no real major bugs. On lollipop, Oct OS is good and Mokee is still releasing new builds. There are others that are good as well; too many to list...
On kitkat I love Slimsaber by fusionjack(and GreekDragon has released newer builds). Kitkat is a bit more battery friendly than LP or MM.
Many many options
noppy22 said:
Marshmallow is quite stable now on the S2, so is Lollipop. Any of the recent MM roms are pretty good. I've been running AICP, Oct M, and AOKP recently(MM) and no real major bugs. On lollipop, Oct OS is good and Mokee is still releasing new builds. There are others that are good as well; too many to list...
On kitkat I love Slimsaber by fusionjack(and GreekDragon has released newer builds). Kitkat is a bit more battery friendly than LP or MM.
Many many options
Click to expand...
Click to collapse
due to messing around with recoveries and getting into a no-boot situation, i've used the recovery i had to flash dirty unicorns android 6.0.1
hopefully that works, and all is well. So frustrating when recovery + kernel are paired.
edit: DU included the latest TWRP. Bliss.
Mussels84 said:
due to messing around with recoveries and getting into a no-boot situation, i've used the recovery i had to flash dirty unicorns android 6.0.1
hopefully that works, and all is well. So frustrating when recovery + kernel are paired.
Click to expand...
Click to collapse
Well good news on that front. @Lanchon has done some very nice work for the S2 community and come up with a solution to the bundled recovery/kernel. Read up on "isorec" HERE. Basically on the newer MM roms and some later LP roms, the kernel supports this isolated recovery. Just flash the isorec recovery and you have a seperated recovery and kernel
noppy22 said:
Well good news on that front. @Lanchon has done some very nice work for the S2 community and come up with a solution to the bundled recovery/kernel. Read up on "isorec" HERE. Basically on the newer MM roms and some later LP roms, the kernel supports this isolated recovery. Just flash the isorec recovery and you have a seperated recovery and kernel
Click to expand...
Click to collapse
only thing left - repartitioning without ODIN.
found some very vague guides on that...
Mussels84 said:
only thing left - repartitioning without ODIN.
found some very vague guides on that...
Click to expand...
Click to collapse
My first recommendation is if you need a 6.0.1 rom, then wait until your usb port is fixed.
If you don't want to wait for that, then take your time and read the link I gave you over on the DU thread for Lanchons re-pit tool. There is a link near the start of that thread to github where you will find downloads for the tool and a more detailed guide. In the xda thread(the one I linked), there are posts from users that will make clear how to use the tool. Basically you need to rename the file to re-partition how you want your layout
If you are not too worried about android version, then maybe try LP or KK. You don't need to re-partition for these roms as long as you use a pico/minimal gapps package and you will get better battery performance.
noppy22 said:
My first recommendation is if you need a 6.0.1 rom, then wait until your usb port is fixed.
If you don't want to wait for that, then take your time and read the link I gave you over on the DU thread for Lanchons re-pit tool. There is a link near the start of that thread to github where you will find downloads for the tool and a more detailed guide. In the xda thread(the one I linked), there are posts from users that will make clear how to use the tool. Basically you need to rename the file to re-partition how you want your layout
If you are not too worried about android version, then maybe try LP or KK. You don't need to re-partition for these roms as long as you use a pico/minimal gapps package and you will get better battery performance.
Click to expand...
Click to collapse
What i've ran into as a hurdle, is the following:
The latest TWRP doesnt work with that tool, there are no older links on the TWRP website.
The Isolated recovery is now merged with TWRP, so there are no older links there either.
If i can find the recommended 2.8.7.0 i guess it would work.
https://www.androidfilehost.com/?fid=24369303960684130
Edit: That link i posted above was correct and worked to repartition.
What's this?:
It's basically a rom for the SM-T555 I created for myself to use Xposed.
UPDATE: SM-T550 version added
Supersu v2.56
Xposed v75
Features:
XXU1AOJ1 Base_update 8.10.15
Deodexed
Deknoxed
Lightly debloated so as not to lose functionality.
Rooted with latest Supersu v2.56 binaries.
Xposed framework.
Install:
Install via TWRP recovery.
No need to wipe, but if you want a minimal system then its advisable to wipe DATA in recovery.
First boot will take around 10 mins.
Disclaimer:
As ever you flash this at your own risk, its up to you to ensure you have a backup with TWRP and/or the stock firmware to hand just in case the Hells Angels decide to ride into to town and kill your device
NOTE: I'm not really going to support this ROM with updates and such. It is what it is, and its up to you to modify it as you wish, more debloat e.t.c., take it or leave it, just leave out the whinging and whining.[emoji14]
UPDATE : New firmware base uploaded. Xposed updated to latest version v75.
Minimum requirement is to be running the same stock build XXU1AOJ1 before install.
SM-T555....https://www.androidfilehost.com/?fid=24269982086996227
SM-T550..... https://www.androidfilehost.com/?fid=24269982087000057
CREDITS: Me, Chainfire, Rovo89, arter97, Samsung
Hit the THANKS button any time you like.
DONATE LINK >>> [a href="http://forum.xda-developers.com/donatetome.php?u=4899305"]DONATE ME[/a]
can i use this on the p555?
stayfidz said:
can i use this on the p555?
Click to expand...
Click to collapse
No, devices above only.
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
ashyx said:
No, devices above only.
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
Click to expand...
Click to collapse
what version of xposed do i have to install on p555m???? and if i have to deox how can i do it?? i wanted for pokemon go
I've got the SM-TM550 and it will boot into the OS just fine and hangout for a little while, but after some time, it's bootlooping. Anyone else having this problem?
sirslipzalot said:
I've got the SM-TM550 and it will boot into the OS just fine and hangout for a little while, but after some time, it's bootlooping. Anyone else having this problem?
Click to expand...
Click to collapse
You may have to wipe data.
Sent from my SM-T280 using XDA-Developers mobile app
Your links seem to be down - they're both status 404 for me.
Also, while I'm at it, do you by any chance have any *.pit files available for SM-T555? I've been wanting to try out the 6.0.1 MM version for it but I can't flash any of the 5.0.2 (that have received the update to 6.0.2) or 6.0.1 ROMs because my T555 is for SEB region and there for any of the ROMs that are 6.0.1 ready, can't be flashed because of invalid EXT4 errors.
karlis1989 said:
Your links seem to be down - they're both status 404 for me.
Also, while I'm at it, do you by any chance have any *.pit files available for SM-T555? I've been wanting to try out the 6.0.1 MM version for it but I can't flash any of the 5.0.2 (that have received the update to 6.0.2) or 6.0.1 ROMs because my T555 is for SEB region and there for any of the ROMs that are 6.0.1 ready, can't be flashed because of invalid EXT4 errors.
Click to expand...
Click to collapse
Links fixed. I have the pit file but not sure that's your issue.
Have had no such issues flashing other region firmware.
Using the Russian version on UK model no problem.
Thanks for the quick response, I'll check out your ROM when I get back. Also, I'll give different region ROMs a try again... maybe the images I've been flashing were corrupt(I tried flashing VOD region firmwares for 5.0.2 & 6.0.1 and Odin failed to flash both), since it complained about mismatching sizes, I just wrote it off as certaint different regions having different partition sizes.
karlis1989 said:
Thanks for the quick response, I'll check out your ROM when I get back. Also, I'll give different region ROMs a try again... maybe the images I've been flashing were corrupt(I tried flashing VOD region firmwares for 5.0.2 & 6.0.1 and Odin failed to flash both), since it complained about mismatching sizes, I just wrote it off as certaint different regions having different partition sizes.
Click to expand...
Click to collapse
You can't flash carrier specific firmware as it will be different as you have found.
Just flash whatever is the latest.
touchscreen&wifi don`t works
chemamontevideo said:
touchscreen&wifi don`t works
Click to expand...
Click to collapse
As stated in the OP.
Minimum requirement is to be running the same stock build XXU1AOJ1 before install.
Click to expand...
Click to collapse
Been using this since mid-August, so I thought I'd leave a bit of feedback .... I have had no problems whatsoever with the ROM - works great. Back when I last posted here I initially wanted to get MM on it because I've gotten used to it on my Nexus, but with Xposed already bundled in, this was just a one up in comparison to a MM ROM.
@ashyx - I have a stock rooted XXU1A0J1 build (the one you reference as necessary), on a T550.
I tried the T550 ROM, wiped cache/dalvik/data after flashing it.
Touchscreen works fine, but no joy on wifi. I can see networks, but not connect. I reset my hotspot AP to open (no encryption) temporarily, still no success. The wifi just shows "connecting" for an extended period of time, then "connecting" disappears briefly, then it reattempts connecting. Eventually I get a "Failed to obtain IP address" message.
I booted a Nexus 7 2013, it instantly connected to the hotspot, had web access.
I restored my backup from TWRP, network came up immediately (hotspot set back to encrypted).
Any ideas? Something broken in the t550 rom I downloaded?
Thanks!
is there a way to remove the "loud audio" pop-up screen that you have to comfirm every time you turn up the volume? this is the worst part of thr sm-t550 because i adjust the audio alot.
i heard its part of the asop but is there a way to hide popup and auto comfirm it so you can turn audio up without the spam?
XLoad3d said:
is there a way to remove the "loud audio" pop-up screen that you have to comfirm every time you turn up the volume? this is the worst part of thr sm-t550 because i adjust the audio alot.
i heard its part of the asop but is there a way to hide popup and auto comfirm it so you can turn audio up without the spam?
Click to expand...
Click to collapse
There's an xposed module by pyler available in the repository.
http://repo.xposed.info/module/com.pyler.nosafevolumewarning
I've used it before, should do the trick.
Any chance one of these will be developed for the SM-P355? There does not seem to be a single ROM out there for it
Hello ashyxx, i hope you are good, one qestion, if i want instal xposed, i need instal your rom or with my rom stock is good.. thanks
calaiou said:
Hello ashyxx, i hope you are good, one qestion, if i want instal xposed, i need instal your rom or with my rom stock is good.. thanks
Click to expand...
Click to collapse
You can install xposed on any rom.
ashyx said:
You can install xposed on any rom.
Click to expand...
Click to collapse
thanks brother ashyx