What's this?:
It's basically a rom for the SM-T555 I created for myself to use Xposed.
UPDATE: SM-T550 version added
Supersu v2.56
Xposed v75
Features:
XXU1AOJ1 Base_update 8.10.15
Deodexed
Deknoxed
Lightly debloated so as not to lose functionality.
Rooted with latest Supersu v2.56 binaries.
Xposed framework.
Install:
Install via TWRP recovery.
No need to wipe, but if you want a minimal system then its advisable to wipe DATA in recovery.
First boot will take around 10 mins.
Disclaimer:
As ever you flash this at your own risk, its up to you to ensure you have a backup with TWRP and/or the stock firmware to hand just in case the Hells Angels decide to ride into to town and kill your device
NOTE: I'm not really going to support this ROM with updates and such. It is what it is, and its up to you to modify it as you wish, more debloat e.t.c., take it or leave it, just leave out the whinging and whining.[emoji14]
UPDATE : New firmware base uploaded. Xposed updated to latest version v75.
Minimum requirement is to be running the same stock build XXU1AOJ1 before install.
SM-T555....https://www.androidfilehost.com/?fid=24269982086996227
SM-T550..... https://www.androidfilehost.com/?fid=24269982087000057
CREDITS: Me, Chainfire, Rovo89, arter97, Samsung
Hit the THANKS button any time you like.
DONATE LINK >>> [a href="http://forum.xda-developers.com/donatetome.php?u=4899305"]DONATE ME[/a]
can i use this on the p555?
stayfidz said:
can i use this on the p555?
Click to expand...
Click to collapse
No, devices above only.
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
ashyx said:
No, devices above only.
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
Click to expand...
Click to collapse
what version of xposed do i have to install on p555m???? and if i have to deox how can i do it?? i wanted for pokemon go
I've got the SM-TM550 and it will boot into the OS just fine and hangout for a little while, but after some time, it's bootlooping. Anyone else having this problem?
sirslipzalot said:
I've got the SM-TM550 and it will boot into the OS just fine and hangout for a little while, but after some time, it's bootlooping. Anyone else having this problem?
Click to expand...
Click to collapse
You may have to wipe data.
Sent from my SM-T280 using XDA-Developers mobile app
Your links seem to be down - they're both status 404 for me.
Also, while I'm at it, do you by any chance have any *.pit files available for SM-T555? I've been wanting to try out the 6.0.1 MM version for it but I can't flash any of the 5.0.2 (that have received the update to 6.0.2) or 6.0.1 ROMs because my T555 is for SEB region and there for any of the ROMs that are 6.0.1 ready, can't be flashed because of invalid EXT4 errors.
karlis1989 said:
Your links seem to be down - they're both status 404 for me.
Also, while I'm at it, do you by any chance have any *.pit files available for SM-T555? I've been wanting to try out the 6.0.1 MM version for it but I can't flash any of the 5.0.2 (that have received the update to 6.0.2) or 6.0.1 ROMs because my T555 is for SEB region and there for any of the ROMs that are 6.0.1 ready, can't be flashed because of invalid EXT4 errors.
Click to expand...
Click to collapse
Links fixed. I have the pit file but not sure that's your issue.
Have had no such issues flashing other region firmware.
Using the Russian version on UK model no problem.
Thanks for the quick response, I'll check out your ROM when I get back. Also, I'll give different region ROMs a try again... maybe the images I've been flashing were corrupt(I tried flashing VOD region firmwares for 5.0.2 & 6.0.1 and Odin failed to flash both), since it complained about mismatching sizes, I just wrote it off as certaint different regions having different partition sizes.
karlis1989 said:
Thanks for the quick response, I'll check out your ROM when I get back. Also, I'll give different region ROMs a try again... maybe the images I've been flashing were corrupt(I tried flashing VOD region firmwares for 5.0.2 & 6.0.1 and Odin failed to flash both), since it complained about mismatching sizes, I just wrote it off as certaint different regions having different partition sizes.
Click to expand...
Click to collapse
You can't flash carrier specific firmware as it will be different as you have found.
Just flash whatever is the latest.
touchscreen&wifi don`t works
chemamontevideo said:
touchscreen&wifi don`t works
Click to expand...
Click to collapse
As stated in the OP.
Minimum requirement is to be running the same stock build XXU1AOJ1 before install.
Click to expand...
Click to collapse
Been using this since mid-August, so I thought I'd leave a bit of feedback .... I have had no problems whatsoever with the ROM - works great. Back when I last posted here I initially wanted to get MM on it because I've gotten used to it on my Nexus, but with Xposed already bundled in, this was just a one up in comparison to a MM ROM.
@ashyx - I have a stock rooted XXU1A0J1 build (the one you reference as necessary), on a T550.
I tried the T550 ROM, wiped cache/dalvik/data after flashing it.
Touchscreen works fine, but no joy on wifi. I can see networks, but not connect. I reset my hotspot AP to open (no encryption) temporarily, still no success. The wifi just shows "connecting" for an extended period of time, then "connecting" disappears briefly, then it reattempts connecting. Eventually I get a "Failed to obtain IP address" message.
I booted a Nexus 7 2013, it instantly connected to the hotspot, had web access.
I restored my backup from TWRP, network came up immediately (hotspot set back to encrypted).
Any ideas? Something broken in the t550 rom I downloaded?
Thanks!
is there a way to remove the "loud audio" pop-up screen that you have to comfirm every time you turn up the volume? this is the worst part of thr sm-t550 because i adjust the audio alot.
i heard its part of the asop but is there a way to hide popup and auto comfirm it so you can turn audio up without the spam?
XLoad3d said:
is there a way to remove the "loud audio" pop-up screen that you have to comfirm every time you turn up the volume? this is the worst part of thr sm-t550 because i adjust the audio alot.
i heard its part of the asop but is there a way to hide popup and auto comfirm it so you can turn audio up without the spam?
Click to expand...
Click to collapse
There's an xposed module by pyler available in the repository.
http://repo.xposed.info/module/com.pyler.nosafevolumewarning
I've used it before, should do the trick.
Any chance one of these will be developed for the SM-P355? There does not seem to be a single ROM out there for it
Hello ashyxx, i hope you are good, one qestion, if i want instal xposed, i need instal your rom or with my rom stock is good.. thanks
calaiou said:
Hello ashyxx, i hope you are good, one qestion, if i want instal xposed, i need instal your rom or with my rom stock is good.. thanks
Click to expand...
Click to collapse
You can install xposed on any rom.
ashyx said:
You can install xposed on any rom.
Click to expand...
Click to collapse
thanks brother ashyx
Related
I am on MDK with Twrp and when I attempt to use a TW 4.3 ROM the phones dialer will not work. I atempt to make or receive a call and the phone will go black and become unresponsive. After the call fails the phone will fiction properly. I still have data and SMS messaging works. I have done clean installs with formating the internal memory. When I flash to a 4.3 asop ROM everything works. Any ideas what I can do to fix this?
shawnxl said:
I am on MDK with Twrp and when I attempt to use a TW 4.3 ROM the phones dialer will not work. I atempt to make or receive a call and the phone will go black and become unresponsive. After the call fails the phone will fiction properly. I still have data and SMS messaging works. I have done clean installs with formating the internal memory. When I flash to a 4.3 asop ROM everything works. Any ideas what I can do to fix this?
Click to expand...
Click to collapse
This is the only 4.3 TW rom available for verizon phones http://forum.xda-developers.com/showthread.php?t=2517611 It works fine. If you trying to flash International Roms use my patch it works http://forum.xda-developers.com/showthread.php?t=2518264
jrkruse said:
This is the only 4.3 TW rom available for verizon phones http://forum.xda-developers.com/showthread.php?t=2517611 It works fine. If you trying to flash International Roms use my patch it works http://forum.xda-developers.com/showthread.php?t=2518264
Click to expand...
Click to collapse
Thank you for your quick response. The first link you posted was the last ROM I had tried. Before posting, I have also tried multiple international roms using your first patch plus your updated patch for heavy themed roms. The only thing i have not tried to flash is diffrent modems. Is there an easy way I can tell what modem I am on?
shawnxl said:
Thank you for your quick response. The first link you posted was the last ROM I had tried. Before posting, I have also tried multiple international roms using your first patch plus your updated patch for heavy themed roms. The only thing i have not tried to flash is diffrent modems. Is there an easy way I can tell what modem I am on?
Click to expand...
Click to collapse
Here Flash the MJ7 modem and never look back! http://forum.xda-developers.com/showthread.php?t=2487298 fore your info the version you have is in setting under phone info under baseband
jrkruse said:
Here Flash the MJ7 modem and never look back! http://forum.xda-developers.com/showthread.php?t=2487298 fore your info the version you have is in setting under phone info under baseband
Click to expand...
Click to collapse
I just did a fresh install after flashing the modem you recommended still getting the same thing. I posted screen caps. When a call comes in nothing works or if I place a call it doesn't connect
shawnxl said:
I just did a fresh install after flashing the modem you recommended still getting the same thing. I posted screen caps. When a call comes in nothing works or if I place a call it doesn't connect
Click to expand...
Click to collapse
You need to download latest version of rom http://forum.xda-developers.com/showthread.php?t=2517611 there is no need to flash any fixes now they are all built in do a full wipe/factory reset then go to advance wipe and wipe system,cache,data then install zip
Hi guys, this is the latest Lollipop ROM rolled out by LG for the international G Pad 8.3.
It's the corean update but works just fine with mine and i hope also with your.
INFO:
1- You can flash it with the TWRP like every Rom out here, i used the bumped TWRP in the original devs thread;
2- The kernel is stock, i only set selinux to permissive because in my works for the G3 i've seen that it's the only way to avoid permission issues;
3- it's bumped so doesn't need nothing special, just flash it in TWRP like i said above;
4- You can dirty flash over the stock 4.4.2 ROM, i made it and had no issues at all.
5- If you are asking why you should flash this instead of the kdz, the answer is that with the "kdz way" you will upload your Bootloader too and you will lost the possibility to flash the twrp and any custom kernel since the new BL patch the exploit used by Bump.
DOWNLOAD
https://www.androidfilehost.com/?fid=95916177934553953
ROOT:
The rom is unrooted, to root it just flash this in recovery:
http://download.chainfire.eu/supersu
Credits:
- Team Codefire for the Bump exploit;
- Chainfire for the root stuff;
reserved
Thanks very much once again ?
Flashed this and everything seems ok so far. Supersu didnt work for me in the first flash with ROM, but when i got back into recovery the second flash worked. Root seems to be pretty strong thus far. I am going to run this for the next few days and see how stock Lollipop is working. Thanks again for this!
Ran for a couple minutes and noticed vibration doesn't work. Do I need to enable something? Pretty solid so far!
Edit: You have to reboot for vibration
Looking great for me so far ,no issues,though I have a lot of setting up to do still ?
Hello,
Very good rom
bye bye kit kat and external sd storage problems
Thank you very much for this rom
Fantastic! Thanks for the work and sharing.
Just flashed it dirty and seems to work flawless.
Major improvements over 4.4 are the "recents apps" button and being able to switch user without having to use hard power button.
Thank you for sharing this!
Can anybody answer me what's with battery, is it worse than on KitKat? And is gamma fixed?
Thank you one again! Cheers!
Sweet! Downloading right now, thank you!!
dirty flashed over a fresh 4.4.2 with SU. wiped cache/dalvik . Rebooted and my tablets a lot more Korean than I usually like it. did i do something wrong?
nvrmnd.... blindly stabing at the language tab worked.
fazbender said:
dirty flashed over a fresh 4.4.2 with SU. wiped cache/dalvik . Rebooted and my tablets a lot more Korean than I usually like it. did i do something wrong?
nvrmnd.... blindly stabing at the language tab worked.
Click to expand...
Click to collapse
Ok then
is it OK to flash over aosp 5.1? (with full wipes of course)
antitolg said:
is it OK to flash over aosp 5.1? (with full wipes of course)
Click to expand...
Click to collapse
i think so, just take a backup in case something go wrong
antitolg said:
is it OK to flash over aosp 5.1? (with full wipes of course)
Click to expand...
Click to collapse
I did. Full wipe worked fine.
Only issue I've noticed so far is the lockscreen weather doesn't seem to work.
I set it up as you would with the g3 but no luck.
Anyone managed to get it working?
For reference, I started with a completely wiped /formated tablet.
Hey dev, when you say 'dirt flash' you mean I have to wipe nothing? Just like if it is an OTA? Do I lose something?
rom is running very smooth so far without any problems, living in germany. much faster as KK relase.
thank you dev!
Skin yoy are awsome!
Glad to see you here to.. Lg g3 owner mate congrats and keep doing your thing.... Thanks once again you great developer!!!!
renatohm said:
Hey dev, when you say 'dirt flash' you mean I have to wipe nothing? Just like if it is an OTA? Do I lose something?
Click to expand...
Click to collapse
Yes.. Thats what i mean. But if you are on aosp rom you must wipe.
And with dirty flash you will not lose anything
Sent from my SM-N910F using XDA Free mobile app
so I got this galaxy s5 (free) to replace the S4 I had.. I'm on AT&T and the S5 is a T-Mobile device.. I unlocked and am currently using on AT&T without any issues.. I tried Cyanogenmod 12 on it.. had way too many Bluetooth music issues.. so I switched back to a rooted t-mobile stock.. which is terrible.. bluetooth music works great but everything is is painfully slow.. so I want to find a good fast custom rom (that also has proper bluetooth music support).. With so many device versions and so many custom roms I'm just a bit perplexed.. I found some that are debloated stock roms which seem like that would be good. but I'm just a bit confused on what parts I need to have as "t-mobile g900t" and which parts I don't have to have that way? so yeah this is a bit of a newbie question (even though I have run 4 or 5 custom roms in the past (original galaxy s and my s4 both had custom roms). .but those were always at&t devices on at&t network.. so was an easier choice..
at any rate.. looking for some tips on how to best find the right rom.. Would love to do this today/tomorrow.. avoid messing with the phone during the work week..
Thanks in advance!!
Gary
Try the latest stock ROM for the phone. Many of us were having issues with lag with prior 5.1.1 ROMS. The latest ROM has fixed all these issues. Very snappy.
i feel like i remember seeing bluetooth/audio fixes & updates in the CM13 nightly changelogs, you also didnt specify which CM 12 you installed... the last 12.1 snapshot from october or the last nightly from december?
You can run whatever rom you want. If it works with KLTE it works on your phone. Check the S5 unified development. Cyanogen has always been crap on this phone, probably always will be. Try an AOSP based one like Tesla or TipsyOS (probably won't find them on this site, they post all of their roms on their Google+ page)
Unfortunately the only Marshmallow available for this phone so far is CM-13 based so it's also crap and full of bugs...
To be honest, no ROM you find will be perfect. The most stable thing I've found is to just use a rooted stock ROM and debloat the hell out of it then run Google Now launcher or Nova and forget that you have a Samsung device for a while, until the next OTA comes out and you have to do the process over again.
Sean89us said:
You can run whatever rom you want. If it works with KLTE it works on your phone. Check the S5 unified development. Cyanogen has always been crap on this phone, probably always will be. Try an AOSP based one like Tesla or TipsyOS (probably won't find them on this site, they post all of their roms on their Google+ page)
Unfortunately the only Marshmallow available for this phone so far is CM-13 based so it's also crap and full of bugs...
To be honest, no ROM you find will be perfect. The most stable thing I've found is to just use a rooted stock ROM and debloat the hell out of it then run Google Now launcher or Nova and forget that you have a Samsung device for a while, until the next OTA comes out and you have to do the process over again.
Click to expand...
Click to collapse
much improved deep sleep battery means crap & full of bugs? i'm over a week behind on nightlies & there arent that many bugs... http://www.cmxlog.com/13/klte/ things are improving all the time, only CM 12.1 is stuck... but the last december nightly isnt buggy either
Sort of forgot about this thread. first Thanks for the replies.. So I have been using CM13 since I posted this.. and this has great for speed.. but BlueTooth continues to suck.. no matter what bluetooth device I use with this Rom it skips and stutters. I've finally had enough.. it's been quite a long time with this issue so time for me to switch.. I will try one of the rooted stock roms and debloat it with one of those tools.. thanks again everyone!
gpinkham said:
Sort of forgot about this thread. first Thanks for the replies.. So I have been using CM13 since I posted this.. and this has great for speed.. but BlueTooth continues to suck.. no matter what bluetooth device I use with this Rom it skips and stutters. I've finally had enough.. it's been quite a long time with this issue so time for me to switch.. I will try one of the rooted stock roms and debloat it with one of those tools.. thanks again everyone!
Click to expand...
Click to collapse
Go to the international s5 site look at Tamirda's phoenix rom . It's 6.0.1 mm very snappy very few bugs. Very moddable. Just load a stock mm rom from here first than so you have the proper bootloader and modem. After installing you feel like you got a mini s7. Good good.
Sean89us said:
You can run whatever rom you want. If it works with KLTE it works on your phone. Check the S5 unified development. Cyanogen has always been crap on this phone, probably always will be. Try an AOSP based one like Tesla or TipsyOS (probably won't find them on this site, they post all of their roms on their Google+ page)
Unfortunately the only Marshmallow available for this phone so far is CM-13 based so it's also crap and full of bugs...
To be honest, no ROM you find will be perfect. The most stable thing I've found is to just use a rooted stock ROM and debloat the hell out of it then run Google Now launcher or Nova and forget that you have a Samsung device for a while, until the next OTA comes out and you have to do the process over again.
Click to expand...
Click to collapse
Sent from my SM-G935F using XDA-Developers mobile app
inspired55 said:
Go to the international s5 site look at Tamirda's phoenix rom . It's 6.0.1 mm very snappy very few bugs. Very moddable. Just load a stock mm rom from here first than so you have the proper bootloader and modem. After installing you feel like you got a mini s7. Good good.
Click to expand...
Click to collapse
Question.. I currently have CM13 loaded in this phone.. so do I still need to do the "Just load a stock mm rom" first? I assumed I already had the proper bootloader and modem..
thanks!
gpinkham said:
Question.. I currently have CM13 loaded in this phone.. so do I still need to do the "Just load a stock mm rom" first? I assumed I already had the proper bootloader and modem..
thanks!
Click to expand...
Click to collapse
If you have the mm bootloader and modem installed just wipe and flash. But I believe cm 13 could be ran on the lp bootloader. I odined the stock tar first that way you know all the partitions are proper. Than Odin Twrp 3 0.0 . Make sure you back up your data from internal storage because when you Odin factory package it wipes phone storage. I learned this the hard way lost a bunch of pictures lol anyway I found this to be the best way. Hoping this helps....
Sent from my SM-G935F using XDA-Developers mobile app
inspired55 said:
If you have the mm bootloader and modem installed just wipe and flash. But I believe cm 13 could be ran on the lp bootloader. I odined the stock tar first that way you know all the partitions are proper. Than Odin Twrp 3 0.0 . Make sure you back up your data from internal storage because when you Odin factory package it wipes phone storage. I learned this the hard way lost a bunch of pictures lol anyway I found this to be the best way. Hoping this helps....]
Click to expand...
Click to collapse
1. is there a way to tell which bootloader I have?
2. I'm running teamwin.. I assume that's fine for flashing Phoenix but does one really need Odin?
3. I had a rooted stock image before I installed CM13.. (the stock image was so dang slow.. forget which.)
thanks again!
Gary
gpinkham said:
1. is there a way to tell which bootloader I have?
2. I'm running teamwin.. I assume that's fine for flashing Phoenix but does one really need Odin?
3. I had a rooted stock image before I installed CM13.. (the stock image was so dang slow.. forget which.)
thanks again!
Gary
Click to expand...
Click to collapse
Get any phone info app and check and see if your bootloader ends in pe1 if it don't you don't have mm bootloader. Teamwin is twrp just make sure it's version 3.0.0 that version seems to do best with the phoenix rom.
Sent from my SM-G935F using XDA-Developers mobile app
inspired55 said:
Get any phone info app and check and see if your bootloader ends in pe3 if it don't you don't have mm bootloader. Teamwin is twrp just make sure it's version 3.0.0 that version seems to do best with the phoenix rom.
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
Sorry for eavesdropping but I dont think that PE3 came yet, either via OTA or on sammobile.
Correct me if I am wrong
Sent from my SM-G900T using XDA-Developers mobile app
S.N [user=2501176 said:
@.k.[/user]3;67525688]Sorry for eavesdropping but I dont think that PE3 came yet, either via OTA or on sammobile.
Correct me if I am wrong
Sent from my SM-G900T using
I'm sorry you are correct I meant pe1 pe3 is for the Note 4. I've been working with a friends note 4 past few days. Thanks for catching my error . Hate giving wrong advice... original post edited...
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
inspired55 said:
Get any phone info app and check and see if your bootloader ends in pe3 if it don't you don't have mm bootloader. Teamwin is twrp just make sure it's version 3.0.0 that version seems to do best with the phoenix rom.[/URL]
Click to expand...
Click to collapse
thanks for sticking with me on the all the newbie questions.. bootloader version reported as G900TUV1FOG6.. later in the list it shows Latest Firmware: G900TUVUGPE1/G900TTMBGPE1/G900TUVU1GPE1.. so at first I was thinking I was ok.. but that second entry had me wondering.. (dang.. just noticed this was never submitted (from 6/28).. oh well)..
ok.. So I assumed I'm good to go.. installed the latest TWRP (3.0.2).. wiped the data area and tried to flash Phoenix.. It starts installing Aroma.. and within a couple of seconds the phone reboots back into TWRP.. did this a few times.. rebooting into the OS gets me a new Cyanagenomod not Phoenix.. figure I must be missing a step somewhere (or have something that is preventing Phoenix from installing).. thoughts?
thanks again!!
gpinkham said:
ok.. So I assumed I'm good to go.. installed the latest TWRP (3.0.2).. wiped the data area and tried to flash Phoenix.. It starts installing Aroma.. and within a couple of seconds the phone reboots back into TWRP.. did this a few times.. rebooting into the OS gets me a new Cyanagenomod not Phoenix.. figure I must be missing a step somewhere (or have something that is preventing Phoenix from installing).. thoughts?
thanks again!!
Click to expand...
Click to collapse
I think you still don't have the correct bootloader . The firmware is mm because your using CM13. The easiest way to get it done for sure is to odin the official MM firmware. Than install Twrp 3.0.0 flash superuser to have root . Reboot in recovery and flash phoenix rom v12.0 than the 12.6 update. This may take extra time this way but all the partitions will be correct. Or odin bootloader in BL slot and modem in cp slot . Don't set for auto reboot pull battery back into download mode Odin Twrp pull battery. Reboot into recovery than flash superuser. Than flash phoenix. Good luck
Sent from my SM-G935F using XDA-Developers mobile app
inspired55 said:
I think you still don't have the correct bootloader . The firmware is mm because your using CM13. The easiest way to get it done for sure is to odin the official MM firmware. Than install Twrp 3.0.0 flash superuser to have root . Reboot in recovery and flash phoenix rom v12.0 than the 12.6 update. This may take extra time this way but all the partitions will be correct. Or odin bootloader in BL slot and modem in cp slot . Don't set for auto reboot pull battery back into download mode Odin Twrp pull battery. Reboot into recovery than flash superuser. Than flash phoenix. Good luck
Click to expand...
Click to collapse
OK.. you may be right.. I downgraded TWRP to 3.0.0 and the install started working fine.. but now the reboot into Phoenix has been going for about 35 mins.. I know it can take some time but that seems extreme.. will wait a bit longer and if it doesn't work I'll try the steps you listed above..
thanks again
Gary
inspired55 said:
I think you still don't have the correct bootloader . The firmware is mm because your using CM13. The easiest way to get it done for sure is to odin the official MM firmware.
Click to expand...
Click to collapse
Well I used Heimdall.. flashed a bootloader image MM.. now the phone seems to be completely bricked.. get the samsung galaxy s5 screen keys light up.. and just sits there.. time to toss it I guess. .(was a freebie anyway)..
gpinkham said:
Well I used Heimdall.. flashed a bootloader image MM.. now the phone seems to be completely bricked.. get the samsung galaxy s5 screen keys light up.. and just sits there.. time to toss it I guess. .(was a freebie anyway)..
Click to expand...
Click to collapse
Got the phone back to CM13. so back to crappy bluetooth music streaming.. ha.. oh well I will give this try again some other day..
thanks again for the help!
Gary
gpinkham said:
Got the phone back to CM13. so back to crappy bluetooth music streaming.. ha.. oh well I will give this try again some other day..
thanks again for the help!
Gary
Click to expand...
Click to collapse
Gary look in this general section for the post that instructs you how to install factory mm. Follow the guide. Google to see how to install factory tar files using Lunix . I'm guessing my instructional writing skills leave something to be desired lol . Once you have the factory mm up and running install Twrp flash superuser reboot. Than reboot into recovery flash phoenix rom. Good good
Sent from my SM-G935F using XDA-Developers mobile app
CMDMOTO PRESENTS
SM-900P Sprint Galaxy S5 Stock-ish with Tidbits[
DOWNLOADS,MODS & RECOMMENDATIONS
AT BOTTOM OF MAIN POST
CHANGE-LOG IN POST #2
HELP ME POST #3
Read Before posting Issues
JUST LOOK HERE 1ST!
PREREQUISITE:
Please update to G900PSPT3CQD1 firmware which can be downloaded from here by using Samsung Odin
MD5: 5c77ee6792da8dd259d0b48bef27e17c
I can not guarantee that you will not have problem if you are on another firmware/modem/bootloader
OK THE DISCLAIMER PART:
I can't be held responsible for the effects of this software, it was designed for testing purposes and fun.
Please make a backup, make sure you have a computer handy with odin
Please take sometime to read all documents before proceeding, you've been warned.
Installation Steps:
1.) Download desired Rom Version from below download link(s)
2.) Place Rom preferably on external SD card
3.) Reboot device into recovery either using Busybox or from device powered off method. (instructions in post#3)
4.) Once in recovery its HIGHLY recommended to install on a clean device. Select Wipe, Then advanced,
put check marks next to System, Dalvik-Cache, Data, Cache
5.) Recommended but NOT necessary: Once wipe is completed, back up one step and choose FORMAT DATA, it will require you to type YES to complete.
6.) When completed return back to Main TWRP screen, Click Mount and make sure System and Data are mounted.
7.) Choose Install then Navigate to where you placed Rom ( You made need to choose SD as the storage location if you put on SD )
9.) Install Rom and wait for it to complete. Once done, wipe Dalvik-Cache/Cache then select reboot and WAIT.
10) Most importantly ENJOY!
Downloads
G900PSPT3CQD1 ROM's
Version VA2
(QD1 Deodexed/Magisk SU/Busybox Added/ su.d added/init.d support/Knox and Itson removed/DE-BLOATED)
Download: https://www.androidfilehost.com/?fid=889964283620772109
MD5: 6a80f263087bf12000a224f7b2fc53f1
Version VA1 (QD1 Deodexed/Magisk SU/Busybox Added/ su.d added/init.d support/Knox and Itson removed/ FULL BLOAT)
Download: https://www.androidfilehost.com/?fid=745849072291694693
MD5: 8c8283610bc703e62ffce7dd561117d7
NOTICE:
The install process will take some time (Approx 15-20 Min), later builds have zip-align at boot to help with de-odexed speeds.
Please help each other out, I will not always be able to answer questions due to having a family, school, work and starting a business. Please be easy on me because this is my first time to build and I am very new to this. Be aware I do NOT support other images/kernels/mods, and i'm unable to help with issues you have if you choose that route. Please post in the appropriate page where you got the images/kernels/mods for best support!
Bugs
None known at this time
Developer(s):
@cmdmoto
Contributor(s) and credit to :
@ViPER520 and @zhuhang for Viper4Android! (An absolute must have for any ROM!)
http://vipersaudio.com/blog/
Please remember to use “Compatible Mode” if you inserted other sound mods.
@topjohnwu for Magisk!
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
@Chainfire for SuperSU!
@SuperR for his wonderful Kitchen!
Built Using: SuperRs Kitchen. Great Tools For Any DEV!
XDA:DevDB Information
[ROM][QD1][6.0.1]14Dec2017] Stock-ish Plus Tidbits, ROM for the Sprint Samsung Galaxy S5
Contributors
cmdmoto
ROM OS Version: 6.0.x Marshmallow
ROM Firmware Required: G900PSPT3CQD1
Version Information
Status: Testing
Created 2017-12-14
Last Updated 2017-12-14
Reserved
One More
Strange....the rom is running nicely, except for the Wifi. It remains connected for a few seconds (maybe a minute), then disconnects. I have rebooted, and I have forgot the wifi info and reconnected, both to no avail.
Can you use this for the things you would normally flash back to stock for (ie PRL updates)?
Couchy said:
Can you use this for the things you would normally flash back to stock for (ie PRL updates)?
Click to expand...
Click to collapse
Yes, You can use either VA1 or VA2
Hi @cmdmoto I just stumbled onto this thread and was wondering if you're still supporting this rom. It looks really interesting and wanted to give it a try. I noticed one mention of wifi not staying connected. Have you experienced this as well? Thanks for any info.
bytes2bits said:
Hi @cmdmoto I just stumbled onto this thread and was wondering if you're still supporting this rom. It looks really interesting and wanted to give it a try. I noticed one mention of wifi not staying connected. Have you experienced this as well? Thanks for any info.
Click to expand...
Click to collapse
My daughter actually uses this ROM and she has not experienced any of the issues that have been mentioned. Also, When an update is available, I will be updating the ROM.
cmdmoto said:
My daughter actually uses this ROM and she has not experienced any of the issues that have been mentioned. Also, When an update is available, I will be updating the ROM.
Click to expand...
Click to collapse
Thanks for the quick reply! I'm definitely gonna give it a try in the next few days. I have to update my baseband first. I dropped down to a lollipop baseband to try MOAR again for a bit. I had been on RR Nougat for quite some time prior to that. I'll keep you posted. What are the "extra tidbits"? Can't wait to find out!
bytes2bits said:
Hi @cmdmoto I just stumbled onto this thread and was wondering if you're still supporting this rom. It looks really interesting and wanted to give it a try. I noticed one mention of wifi not staying connected. Have you experienced this as well? Thanks for any info.
Click to expand...
Click to collapse
That wifi problem night be device specific (mine). Not sure what that's about.
Turns out it was the Magisk file that I was flashing. Started causing all sorts of trouble. Back on this rom with no root, and running properly. I really)y don't need root, so I'm not going to bother with that.
how can I install twrp recovery on marshmallow sprint s5?
i got another rom installed on my s5 but is the same CDQ1 can I still flash this rom???
torhect said:
how can I install twrp recovery on marshmallow sprint s5?
Click to expand...
Click to collapse
Same as in the past, use Odin, just be sure to uncheck in option reset, reboot.
doubledragon5 said:
Same as in the past, use Odin, just be sure to uncheck in option reset, reboot.
Click to expand...
Click to collapse
Ok thanks! Another thing! Which is the latest twrp version on s5 marsmallow Sprint? And i want to know if this is only a debloat touchiwz version? Or has tweaks?
torhect said:
Ok thanks! Another thing! Which is the latest twrp version on s5 marsmallow Sprint? And i want to know if this is only a debloat touchiwz version? Or has tweaks?
Click to expand...
Click to collapse
I believe that is the only one that is debloat. I was using MOAR 7.0, but switched to crdroid, because of not being able to receive MMS. I use. TWRP 3.2.1-0. Just make sure it is the Qualcomm (ktle) version.
doubledragon5 said:
I believe that is the only one that is debloat. I was using MOAR 7.0, but switched to crdroid, because of not being able to receive MMS. I use. TWRP 3.2.1-0. Just make sure it is the Qualcomm (ktle) version.
Click to expand...
Click to collapse
Mine is the sprint version of s5! I believe is the one required for installing this rom and i got installed the same 6.0 CQD1 stock firmware specified in the post. But i have to look for the right twrp version for my sprint s5.
How about battery life in this rom ? Is it better than stock roms?
torhect said:
Mine is the sprint version of s5! I believe is the one required for installing this rom and i got installed the same 6.0 CQD1 stock firmware specified in the post. But i have to look for the right twrp version for my sprint s5.
How about battery life in this rom ? Is it better than stock roms?
Click to expand...
Click to collapse
The one I mentioned in the last post is what you need. Go to this link top devices it will have G900P. https://twrp.me/samsung/samsunggalaxys5qualcomm.html
Screenshots?
Does this ROM have native hotspot enabled?
Boots up, not much testing done by me. My 3 year old won't let go of his tab A
Permissive Kernel, Root restrictions removed. Pretty much stock ( For now ) .
Built from SM-T357T_NA_LL_Opensource.zip found at http://opensource.samsung.com/ using Uber tool chain .
Will add more info, github links, and thanks later. Also a TWRP installation script , for now use download mode and Odin.
This worked for me, incase it does not work for you I suggest taking a backup of kernel prior to flashing .
Running 5.0.2 , so I did not have to check OEM unlock
BASEBAND T357TUVS1PL1
You flash this at your own risk. Please ensure you have the stock ROM and OR KERNEL to hand downloaded from SAMMOBILE in case of problems. This will trip the knox counter.
hightech316 said:
Boots up, not much testing done by me. My 3 year old won't let go of his tab A
Permissive Kernel, Root restrictions removed. Pretty much stock ( For now ) .
Built from SM-T357T_NA_LL_Opensource.zip found at http://opensource.samsung.com/ using Uber tool chain .
Will add more info, github links, and thanks later. Also a TWRP installation script , for now use download mode and Odin.
This worked for me, incase it does not work for you I suggest taking a backup of kernel prior to flashing .
Running 5.0.2 , so I did not have to check OEM unlock
BASEBAND T357TUVS1PL1
You flash this at your own risk. Please ensure you have the stock ROM and OR KERNEL to hand downloaded from SAMMOBILE in case of problems. This will trip the knox counter.
Click to expand...
Click to collapse
Thanks for working on this, looking forward to seeing your next update.
Sent from my SM-N950U using Tapatalk
blakwolf said:
Thanks for working on this, looking forward to seeing your next update.
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
Hopefully can get an updated build by the weekend few releases until I get the hang of changing changing CPU freq & scaling .
Also looking into ROM dev... Anyone want to jump in and help the T357T out, more the merrier . We don't have much for this particular variant , hopefully we can change that around!:highfive:
I've poked around a while ago, but never got deep into it. Maybe I'll fire up a Linux stick and see what happens. I'm on the newest baseband so I couldn't use your kernel, but i just rooted and after installing adaway and removing some bloat via titanium backup, I noticed a huge drop in overall lag and I can actually use the tab without getting annoyed.
dc300m01 said:
I've poked around a while ago, but never got deep into it. Maybe I'll fire up a Linux stick and see what happens. I'm on the newest baseband so I couldn't use your kernel, but i just rooted and after installing adaway and removing some bloat via titanium backup, I noticed a huge drop in overall lag and I can actually use the tab without getting annoyed.
Click to expand...
Click to collapse
Could you post up a list of what you safely disabled?
Sent from my SM-N950U using Tapatalk
blakwolf said:
Could you post up a list of what you safely disabled?
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
Using titanium backup ( and being rooted ) , you can freeze knox and other carrier bloat. ( 2nd link shows which apps )
Here is a small guide how to debloat via windows , good read :good:
https://www.xda-developers.com/uninstall-carrier-oem-bloatware-without-root-access/
Also check out this post. A list for the S7, of which apps are " safe " to remove. I'd proceed with caution . Alot of these apps won't be seen on our Tab A. Still, good reference .
https://forum.xda-developers.com/galaxy-s7/how-to/debloat-galaxy-s7-services-safe-to-t3432967 .
Further down the line I want to release a debloated / optimize ROM.
I'm currently stuck building v2 (CPU Governors, I/O schedulers, TCPA, Init.d , etc) of this kernel.
Compile errors of course . Slowly, but surely I'm fixing them.
Unsupport dev_type during flash
hightech316 said:
Boots up, not much testing done by me. My 3 year old won't let go of his tab A
Permissive Kernel, Root restrictions removed. Pretty much stock ( For now ) .
Built from SM-T357T_NA_LL_Opensource.zip found at http://opensource.samsung.com/ using Uber tool chain .
Will add more info, github links, and thanks later. Also a TWRP installation script , for now use download mode and Odin.
This worked for me, incase it does not work for you I suggest taking a backup of kernel prior to flashing .
Running 5.0.2 , so I did not have to check OEM unlock
BASEBAND T357TUVS1PL1
You flash this at your own risk. Please ensure you have the stock ROM and OR KERNEL to hand downloaded from SAMMOBILE in case of problems. This will trip the knox counter.
Click to expand...
Click to collapse
Thanks for compiling this permissive kernel but it is not flashing under the same OS you used. I tried all versions of Odin and it gave me an Unsupport dev_type error. Can you confirm the baseband version you used? I checked on samsungmobile and I think you forgot the A in the basband version (APL1). What steps did you use to flash the device? Thanks again -AC
AndroidClone said:
Thanks for compiling this permissive kernel but it is not flashing under the same OS you used. I tried all versions of Odin and it gave me an Unsupport dev_type error. Can you confirm the baseband version you used? I checked on samsungmobile and I think you forgot the A in the basband version (APL1). What steps did you use to flash the device? Thanks again -AC
Click to expand...
Click to collapse
Use odin 3.12.x
I can't flash either, I get the same error Unsupport dev_type error, my baseband version is also APL1, any way of helping us out with this issue? or maybe make it flash-able through TWRP?
Thanks!!!
Well, this was fairly anticlimactic