Related
Hello!
I think my MMX Canvas HD A116 has been soft bricked. :crying:
I'd installed DOGE http://forum.xda-developers.com/showthread.php?t=2663763 ROM, and it was working fine. After that I tried to get backup using Nandroid Manager but it was failed. So, I restarted phone in CWM Recovery mode and tried to backup data from there.
But after that, my phone went dead.
Screen starts for few seconds but it is not showing boot logo and even I'm not able to go into recovery mode also!
My PC or SP Flash Tool is also not recognizing phone.
Will USB Jig work for MMX phones? Is there any hope?!
Please help!
try to reinstall the drivers.. and then connect your device through sptools.
kalpesh_36 said:
try to reinstall the drivers.. and then connect your device through sptools.
Click to expand...
Click to collapse
I tried that.
Still not working! :crying:
try this
1. Turn off the phone by
removing battery.
2. Press and hold the Power button along with both the
‘Volume +’ and ‘Volume -’ buttons until the screen
displays two options.(volume keys first then power key .
after 5-10 seconds holding, Then 2 option will appear)
3. Press the ‘Volume +’ button to enter Recovery Mode.
wipe dalvik, data, cache partion. install MIUI or pure xperia
z2(my choice only, you can try any stable rom) from your
memory card.
shivrajsingh said:
try this
1. Turn off the phone by
removing battery.
2. Press and hold the Power button along with both the
‘Volume +’ and ‘Volume -’ buttons until the screen
displays two options.(volume keys first then power key .
after 5-10 seconds holding, Then 2 option will appear)
3. Press the ‘Volume +’ button to enter Recovery Mode.
wipe dalvik, data, cache partion. install MIUI or pure xperia
z2(my choice only, you can try any stable rom) from your
memory card.
Click to expand...
Click to collapse
Thank you Shivraj for replying.
But as I said in earlier post, my phone is not going into recovery mode. As I press "Volume +" button, it goes off. I wish somehow I can at least boot my phone into recovery mode!
Have anyone tried USB jig for Micromax phones?
aryankirtan said:
Thank you Shivraj for replying.
But as I said in earlier post, my phone is not going into recovery mode. As I press "Volume +" button, it goes off. I wish somehow I can at least boot my phone into recovery mode!
Have anyone tried USB jig for Micromax phones?
Click to expand...
Click to collapse
i guess usb jig only works for Samsung phones..but since u r saying that the device does power on for a second...mayb its not completely bricked...try installing the correct drivers..see if that works?
edwardpage said:
i guess usb jig only works for Samsung phones..but since u r saying that the device does power on for a second...mayb its not completely bricked...try installing the correct drivers..see if that works?
Click to expand...
Click to collapse
That right. Even if USB Jig works on MTk, it will also result in rebooting after 2-3 seconds which you are getting after pressing volume + button. You can only install correct MTK drivers and then install stock rom.
Download Flash Tool , Stock ROM AND USB Driver From Above LINK
NOW Create Folder IN Desktop Give It Name "FLASH"
Copy All Downloaded File In Recently Created Folder "FLASH"
Extract 'SP_Flash_Tool_v3.1304.0.119.rar' AND Also Extract Stock ROM File
NOW Open SP Flash Tools Folder AND Double Click ON "Flashtool.exe"
In Flashtool..Click On SCATTER-LOADING(FOUND IN RIGHT-SIDE) AND Select SCATTER File From STOCK ROM'S Folder
Flashtool Automatic Select All IMGs AND FILEs
NOW Completely Turn Off Your Phone
In Flashtool..Click On "DOWNLOAD" Button
Install USB Driver AND Connect Your Device To Computer
If Everything Is Right Then Process Will Start...Wait Till All Progress Completion
After All Process "GREEN CIRCLE" Appear In Center..
DISCONNECT PHONE AND POWER ON...THAT'S ALL
the correct drivers for mediatek is attached below.
Also, the process after "In Flashtool..Click On "DOWNLOAD" Button" , should be:
1. Open device manager
2. Connect your phone to PC through data cable.
3. New device will appear in device manager for 5-10 seconds only.
4. Quickly right click on newly appeared device and selected update driver.
5. Select drivers from downloaded and extracted attachment.
6. It will successfully install driver.
7. Remove data cable from phone and again insert it in phone.
8. SP tools will recognize it and automatically start flashing since you have already pressed download button earlier.
9. Flashing will complete in 3-4 minutes.
Thank you so much! Finally unbricked my MMX A116
shivrajsingh said:
That right. Even if USB Jig works on MTk, it will also result in rebooting after 2-3 seconds which you are getting after pressing volume + button. You can only install correct MTK drivers and then install stock rom.
Download Flash Tool , Stock ROM AND USB Driver From Above LINK
NOW Create Folder IN Desktop Give It Name "FLASH"
Copy All Downloaded File In Recently Created Folder "FLASH"
Extract 'SP_Flash_Tool_v3.1304.0.119.rar' AND Also Extract Stock ROM File
NOW Open SP Flash Tools Folder AND Double Click ON "Flashtool.exe"
In Flashtool.. Click On SCATTER-LOADING(FOUND IN RIGHT-SIDE) AND Select SCATTER File From STOCK ROM'S Folder
Flashtool Automatic Select All IMGs AND FILEs
NOW Completely Turn Off Your Phone
In Flashtool..Click On "DOWNLOAD" Button
Install USB Driver AND Connect Your Device To Computer
If Everything Is Right Then Process Will Start...Wait Till All Progress Completion
After All Process "GREEN CIRCLE" Appear In Center..
DISCONNECT PHONE AND POWER ON...THAT'S ALL
the correct drivers for mediatek is attached below.
Also, the process after "In Flashtool..Click On "DOWNLOAD" Button" , should be:
1. Open device manager
2. Connect your phone to PC through data cable.
3. New device will appear in device manager for 5-10 seconds only.
4. Quickly right click on newly appeared device and selected update driver.
5. Select drivers from downloaded and extracted attachment.
6. It will successfully install driver.
7. Remove data cable from phone and again insert it in phone.
8. SP tools will recognize it and automatically start flashing since you have already pressed download button earlier.
9. Flashing will complete in 3-4 minutes.
Click to expand...
Click to collapse
Thank you soooo much man. You saved my day... :good:
This drivers worked perfectly and with this method, I finally UNBRICKED my Micromax A116 handset.
Use this drivers for using SP Flash tool with MMX A116.
Perfect!
Thank you Shivraj Singh... :good:
aryankirtan said:
Thank you soooo much man. You saved my day... :good:
This drivers worked perfectly and with this method, I finally UNBRICKED my Micromax A116 handset.
Use this drivers for using SP Flash tool with MMX A116.
Perfect!
Thank you Shivraj Singh... :good:
Click to expand...
Click to collapse
Most welcome
shivrajsingh said:
That right. Even if USB Jig works on MTk, it will also result in rebooting after 2-3 seconds which you are getting after pressing volume + button. You can only install correct MTK drivers and then install stock rom.
Download Flash Tool , Stock ROM AND USB Driver From Above LINK
NOW Create Folder IN Desktop Give It Name "FLASH"
Copy All Downloaded File In Recently Created Folder "FLASH"
Extract 'SP_Flash_Tool_v3.1304.0.119.rar' AND Also Extract Stock ROM File
NOW Open SP Flash Tools Folder AND Double Click ON "Flashtool.exe"
In Flashtool..Click On SCATTER-LOADING(FOUND IN RIGHT-SIDE) AND Select SCATTER File From STOCK ROM'S Folder
Flashtool Automatic Select All IMGs AND FILEs
NOW Completely Turn Off Your Phone
In Flashtool..Click On "DOWNLOAD" Button
Install USB Driver AND Connect Your Device To Computer
If Everything Is Right Then Process Will Start...Wait Till All Progress Completion
After All Process "GREEN CIRCLE" Appear In Center..
DISCONNECT PHONE AND POWER ON...THAT'S ALL
the correct drivers for mediatek is attached below.
Also, the process after "In Flashtool..Click On "DOWNLOAD" Button" , should be:
1. Open device manager
2. Connect your phone to PC through data cable.
3. New device will appear in device manager for 5-10 seconds only.
4. Quickly right click on newly appeared device and selected update driver.
5. Select drivers from downloaded and extracted attachment.
6. It will successfully install driver.
7. Remove data cable from phone and again insert it in phone.
8. SP tools will recognize it and automatically start flashing since you have already pressed download button earlier.
9. Flashing will complete in 3-4 minutes.
Click to expand...
Click to collapse
Hello sir pls. Help me. I too want to flash the v5 of stock ROM but i the driver you have suggested below contains nothing.pls help how to proceed ahead.
alex279 said:
Hello sir pls. Help me. I too want to flash the v5 of stock ROM but i the driver you have suggested below contains nothing.pls help how to proceed ahead.
Click to expand...
Click to collapse
They contain drivers only. SP tools and stock rom needs to be downloaded separately.
need help for drivers
shivrajsingh said:
They contain drivers only. SP tools and stock rom needs to be downloaded separately.
Click to expand...
Click to collapse
very much thankful for the reply.... i am having the other 2 but facing problem with only the drivers, going through sp tools...scatter loading...download....no detection of my device... this might be due to drivers. i found nothing in your 11kb drivers. pls suggest me how i can download the correct drivers. pls. if possible elaborate it stepwise(as i m doing it for the first time/newbie)......hope a quick reply from your side
alex279 said:
very much thankful for the reply.... i am having the other 2 but facing problem with only the drivers, going through sp tools...scatter loading...download....no detection of my device... this might be due to drivers. i found nothing in your 11kb drivers. pls suggest me how i can download the correct drivers. pls. if possible elaborate it stepwise(as i m doing it for the first time/newbie)......hope a quick reply from your side
Click to expand...
Click to collapse
Which windows version, u r using??
.....!!!!!
shivrajsingh said:
Which windows version, u r using??
Click to expand...
Click to collapse
Using windows 8 - 64Bit
alex279 said:
Using windows 8 - 64Bit
Click to expand...
Click to collapse
First disable driver signing (Windows 8 users Only)
use this link for tutorial.....
https://learn.sparkfun.com/tutorial...abling-signed-driver-enforcement-on-windows-8
Now extract the mtk universal driver attachment.
1. Open device manager
2. Connect your phone to PC through data cable.
3. New device will appear in device manager for 5-10 seconds only.
4. Quickly right click on newly appeared device and selected update driver.
5. Select drivers from downloaded and extracted attachment.(right click on new appeared device -> browse my computer for drivers-> browse windows 7 drivers i.e. usb2ser_Win764 in extracted folder)
6. It will successfully install driver.
7. Remove data cable from phone and again insert it in phone.
8. SP tools will recognize it and automatically start flashing since you have already pressed download button earlier.
9. Flashing will complete in 3-4 minutes.
Hello many thnx to you for this useful info. Now i have flashed the device successfully.... Pls. if you can help me to swap the phone storage with the external sd card then it would be great help for me. Actually i have tried to do so but some how i bricked the device & that is why i have to flash.... Pls. Sir give me details guide on how to swap memory on canvas HD A116
Sent from my Micromax A116i using XDA Premium 4 mobile app
alex279 said:
Hello many thnx to you for this useful info. Now i have flashed the device successfully.... Pls. if you can help me to swap the phone storage with the external sd card then it would be great help for me. Actually i have tried to do so but some how i bricked the device & that is why i have to flash.... Pls. Sir give me details guide on how to swap memory on canvas HD A116
Sent from my Micromax A116i using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hello friend,
Try this way: http://forum.xda-developers.com/showthread.php?t=2346389
As it works on MediaTek devices and MMX A116 is one of this.
pls suggest me how i can download the correct drivers.
aryankirtan said:
Hello!
I think my MMX Canvas HD A116 has been soft bricked. :crying:
I'd installed DOGE http://forum.xda-developers.com/showthread.php?t=2663763 ROM, and it was working fine. After that I tried to get backup using Nandroid Manager but it was failed. So, I restarted phone in CWM Recovery mode and tried to backup data from there.
But after that, my phone went dead.
Screen starts for few seconds but it is not showing boot logo and even I'm not able to go into recovery mode also!
My PC or SP Flash Tool is also not recognizing phone.
Will USB Jig work for MMX phones? Is there any hope?!
Please help!
Click to expand...
Click to collapse
It had to me once, when I was going to flash the stock rom from SP Flash tools. I think there was some drivers problem, and the process stopped in between, and when i tried to turn the phone on, it only emitted some light and would stay that until the battery would drain. After a few days, it went dead, no response. This was the time I realized that I had to give it to a service center. Unfortunately, the service was awfully bad, and my phone came repaired back after 3 MONTHS! So, I recommend, that you hand it over to a non-micromax service center (as your warranty is now void), and try your luck! All the best!
P.S. My CHD is working awesome now, installed MiUi
[email protected] said:
pls suggest me how i can download the correct drivers.
Click to expand...
Click to collapse
download Mt65xx vcom drivers then see the video below
---------- Post added at 12:54 PM ---------- Previous post was at 12:06 PM ----------
aryankirtan said:
Thank you Shivraj for replying.
But as I said in earlier post, my phone is not going into recovery mode. As I press "Volume +" button, it goes off. I wish somehow I can at least boot my phone into recovery mode!
Have anyone tried USB jig for Micromax phones?
Click to expand...
Click to collapse
just flash the stock backup using SP flash tool
Hi All,
Need some help. My Samsung S3 mini i2800L was flashed with the wrong firmware in an attempt to upgrade to Jellybean 4.2.2 using odin and it failed . It remained in download mode and I did a battery pull ,now the phone is absolutely dead. Black Screen for all the following:Recovery Mode and Download Mode .The phone wont power on at all. The only sign of life , is when I plugged into my girl friend's Toshiba laptop via usb cable and it searched and installed the drivers.In addition Windows makes a sound when the device is plugged in and unplugged, but is not being recognized by Kies or Odin. I also tried a USB JIG with no success.
Is there any debrick file that I can use for to place on my SD card and attempt to boot from SD, or is JTAG the only option left?
yes!!! you can UNBrick it!!!
OK ... good news for you is it can still be read by the comp when connected (prompts by audio signal) ... it wont take more than 2 min to unbrick your phone... tell me have if you have a stock ROM available for your device?
unbrick Samsung galaxy s3 mini
omkarfrozen said:
OK ... good news for you is it can still be read by the comp when connected (prompts by audio signal) ... it wont take more than 2 min to unbrick your phone... tell me have if you have a stock ROM available for your device?
Click to expand...
Click to collapse
Yes I have downloaded a stock ROM from the internet that can be used. My phone is unlocked so I just downloaded a open firmware , please guide me on the steps required and thanks for responding BTW.
Leon bernard said:
Yes I have downloaded a stock ROM from the internet that can be used. My phone is unlocked so I just downloaded a open firmware , please guide me on the steps required and thanks for responding BTW.
Click to expand...
Click to collapse
have you downloaded SP flash tool along with it??? if not then search for that tool on needrom website... now turn off your phone by removing the battery... now open the SP flash tool and select the Scatter-Loading file present in your stock ROM folder... now click download button... then quickly connect your phone via USB... wait for 5 min ... you will get a message box with green circle and you are done!!! use your phone as you used to earlier...
will try it
omkarfrozen said:
have you downloaded SP flash tool along with it??? if not then search for that tool on needrom website... now turn off your phone by removing the battery... now open the SP flash tool and select the Scatter-Loading file present in your stock ROM folder... now click download button... then quickly connect your phone via USB... wait for 5 min ... you will get a message box with green circle and you are done!!! use your phone as you used to earlier...
Click to expand...
Click to collapse
Wow. Im going to try this when I reach home from work today, I will let you know if it works. Thanks a million
how to access scatter loading file
Leon bernard said:
Wow. Im going to try this when I reach home from work today, I will let you know if it works. Thanks a million
Click to expand...
Click to collapse
Hi ,
So I have the stock rom but its in md.5 format so I cant access the directories. Is their anyway I can convert it so I can access the scatter loading file ?
omkarfrozen said:
have you downloaded SP flash tool along with it??? if not then search for that tool on needrom website... now turn off your phone by removing the battery... now open the SP flash tool and select the Scatter-Loading file present in your stock ROM folder... now click download button... then quickly connect your phone via USB... wait for 5 min ... you will get a message box with green circle and you are done!!! use your phone as you used to earlier...
Click to expand...
Click to collapse
Hi ,
So I have the stock rom but its in md.5 format so I cant access the directories. Is their anyway I can convert it so I can access the scatter loading file ?
Leon bernard said:
Hi ,
So I have the stock rom but its in md.5 format so I cant access the directories. Is their anyway I can convert it so I can access the scatter loading file ?
Click to expand...
Click to collapse
OK if you have stock ROM in md5 then follow these steps
1) copy the md5 file on desktop
2. Download Odin 3.07
3. Switch off your phone and boot Galaxy S3 Mini I8200L into Download
Mode by pressing and holding the Volume Down+Home+Power buttons
(long press until the boot screen appear), now press Volume Up key to
proceed to Download Mode .IN CASE IT doesn't WORK TRY EVERY COMBINATION SO AS TO ACHIEVE 6TH STEP... IF NOTHING WORKS THEN JUST CONNECT THE PHONE WITHOUT PRESSING ANY COMBINATIONS...
4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe
file as an administrator (Right click on the .exe file and click on Run as
administrator)
5. Now connect your Galaxy S3 Mini I8200L to your computer via USB
cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at
ID:COM section and “Added!” text at the message box. This means your
device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are
checked.
8. Now, extract the downloaded firmware .zip file, you’ll find a firmware file
with extension .tar.md5
9. In Odin screen, click on PDA button and select the firmware file with
.tar.md5 extension (The firmware file look something like:
I8200LXXDLJ5_I8200LODDDLI7_INU.tar.md5)
10. Now, click on the Start button to begin the installation process, wait few
moments.
11. Once completed, you would see “PASS!” message in ID:COM port having
green background
12. Your phone should automatically reboot after completion
13. You can now disconnect your phone from computer
14. Finish.
omkarfrozen said:
OK if you have stock ROM in md5 then follow these steps
1) copy the md5 file on desktop
2. Download Odin 3.07
3. Switch off your phone and boot Galaxy S3 Mini I8200L into Download
Mode by pressing and holding the Volume Down+Home+Power buttons
(long press until the boot screen appear), now press Volume Up key to
proceed to Download Mode .IN CASE IT doesn't WORK TRY EVERY COMBINATION SO AS TO ACHIEVE 6TH STEP... IF NOTHING WORKS THEN JUST CONNECT THE PHONE WITHOUT PRESSING ANY COMBINATIONS...
4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe
file as an administrator (Right click on the .exe file and click on Run as
administrator)
5. Now connect your Galaxy S3 Mini I8200L to your computer via USB
cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at
ID:COM section and “Added!” text at the message box. This means your
device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are
checked.
8. Now, extract the downloaded firmware .zip file, you’ll find a firmware file
with extension .tar.md5
9. In Odin screen, click on PDA button and select the firmware file with
.tar.md5 extension (The firmware file look something like:
I8200LXXDLJ5_I8200LODDDLI7_INU.tar.md5)
10. Now, click on the Start button to begin the installation process, wait few
moments.
11. Once completed, you would see “PASS!” message in ID:COM port having
green background
12. Your phone should automatically reboot after completion
13. You can now disconnect your phone from computer
14. Finish.
Click to expand...
Click to collapse
Sigh , unfortunately odin is not detecting my phone at all. Remember that the phone is completely dead, which means it cant power on or go any mode . I think the SP Flash tool would work but I need the scatter file
Leon bernard said:
Sigh , unfortunately odin is not detecting my phone at all. Remember that the phone is completely dead, which means it cant power on or go any mode . I think the SP Flash tool would work but I need the scatter file
Click to expand...
Click to collapse
Download Samsung mobile drivers... Because you had said your friends laptopts prompts when you connect your mobile to his laptop. So remember 1thñg your phone is not completely dead yet. try if flash ROM from his laptop
omkarfrozen said:
Download Samsung mobile drivers... Because you had said your friends laptopts prompts when you connect your mobile to his laptop. So remember 1thñg your phone is not completely dead yet. try if flash ROM from his laptop
Click to expand...
Click to collapse
Ok so update: I downloaded Keis and installed all drivers. I recognized now that the phone is connecting as EMEI on PC. I clicked on it uninstall the drivers and re install it , but ODIN nor Keis still does not recognize phone , only computer recognizes phone as EMEI. Let me know your views.
Leon bernard said:
Ok so update: I downloaded Keis and installed all drivers. I recognized now that the phone is connecting as EMEI on PC. I clicked on it uninstall the drivers and re install it , but ODIN nor Keis still does not recognize phone , only computer recognizes phone as EMEI. Let me know your views.
Click to expand...
Click to collapse
get your Samsung usb drivers from here developer.samsung .com /board/download.do?bdId=0000000700&attachId=0000000001 (remove the spaces in between). give me some time so that I can find scatter file for your phone.
omkarfrozen said:
get your Samsung usb drivers from here developer.samsung .com /board/download.do?bdId=0000000700&attachId=0000000001 (remove the spaces in between). give me some time so that I can find scatter file for your phone.
Click to expand...
Click to collapse
drivers downloaded and installed. I await the scatter file. thanks for your efforts .
Leon bernard said:
Hi All,
Need some help. My Samsung S3 mini i2800L was flashed with the wrong firmware in an attempt to upgrade to Jellybean 4.2.2 using odin and it failed . It remained in download mode and I did a battery pull ,now the phone is absolutely dead. Black Screen for all the following:Recovery Mode and Download Mode .The phone wont power on at all. The only sign of life , is when I plugged into my girl friend's Toshiba laptop via usb cable and it searched and installed the drivers.In addition Windows makes a sound when the device is plugged in and unplugged, but is not being recognized by Kies or Odin. I also tried a USB JIG with no success.
Is there any debrick file that I can use for to place on my SD card and attempt to boot from SD, or is JTAG the only option left?
Click to expand...
Click to collapse
follow this brick
Help me too
Leon bernard said:
drivers downloaded and installed. I await the scatter file. thanks for your efforts .
Click to expand...
Click to collapse
I got the exact same issue.. my phone is samsung galaxy s3 mini. i will be very happy if you would also find the scatter file (although i still have no idea what is that) for my phone too, while i google it. i'm newbie, i'm not really sure what to find.. help me.. :crying:
tebegaya said:
I got the exact same issue.. my phone is samsung galaxy s3 mini. i will be very happy if you would also find the scatter file (although i still have no idea what is that) for my phone too, while i google it. i'm newbie, i'm not really sure what to find.. help me.. :crying:
Click to expand...
Click to collapse
Hey guys am using samsung s3 mini GT I8190, i recently flashed cyanogenmode 5.1.1 on my device, it was working fine but i decided to do a nandroid back up and in the process my phone died. it cannot power on or go to downloading mode. When i connect to my laptop there is a sound that its connected but then it disconnects help please..
omkarfrozen said:
OK if you have stock ROM in md5 then follow these steps
1) copy the md5 file on desktop
2. Download Odin 3.07
3. Switch off your phone and boot Galaxy S3 Mini I8200L into Download
Mode by pressing and holding the Volume Down+Home+Power buttons
(long press until the boot screen appear), now press Volume Up key to
proceed to Download Mode .IN CASE IT doesn't WORK TRY EVERY COMBINATION SO AS TO ACHIEVE 6TH STEP... IF NOTHING WORKS THEN JUST CONNECT THE PHONE WITHOUT PRESSING ANY COMBINATIONS...
4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe
file as an administrator (Right click on the .exe file and click on Run as
administrator)
5. Now connect your Galaxy S3 Mini I8200L to your computer via USB
cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at
ID:COM section and “Added!” text at the message box. This means your
device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are
checked.
8. Now, extract the downloaded firmware .zip file, you’ll find a firmware file
with extension .tar.md5
9. In Odin screen, click on PDA button and select the firmware file with
.tar.md5 extension (The firmware file look something like:
I8200LXXDLJ5_I8200LODDDLI7_INU.tar.md5)
10. Now, click on the Start button to begin the installation process, wait few
moments.
11. Once completed, you would see “PASS!” message in ID:COM port having
green background
12. Your phone should automatically reboot after completion
13. You can now disconnect your phone from computer
14. Finish.
Click to expand...
Click to collapse
Hello, i need some help. I have tried all but always shows faild...i even use a recovery.tar and the bar goes all the way to the end but when the procces its almost finish it shows FAIL.
What can i do?
I do have the firmwarew file and it does not work, thx
Hi Guys,
My sister's MMX A116 is totally bricked and not even able to turn it on. Earlier It was stuck in bootloop and she gave it to some mobile repairing shop and they hard bricked it . I can't even boot to recovery. Is there any chance of unbricking it? If yes, please tell how.
MrJukeHardbane said:
Hi Guys,
My sister's MMX A116 is totally bricked and not even able to turn it on. Earlier It was stuck in bootloop and she gave it to some mobile repairing shop and they hard bricked it . I can't even boot to recovery. Is there any chance of unbricking it? If yes, please tell how.
Click to expand...
Click to collapse
MrJukeHardbane,
First of all you need to download A116 Stock ROM, Drivers and SP Flash Tools by googling.
Then Remove your battery of the phone and SIM cards as well as Memory card,
Then install A116 Drivers in your PC then open SP flash tools window by double clicking on Flash_Tools.exe
the windows of SP Flash tool will open then click on Scatter Loading and search for the A116 Stock ROM you downloaded and extracted and find MT6589_Android_scatter_emmc file and open it
find the Download button on the upper side of window and click on it
Then connect your phone to PC with the data cable and try pressing volume up button and power butter simultaneously 3 to 4 times them you can see at the base of the window your phone will get detected and connected with the port and rest process will be done automatically wail till you see the green circle on the screen.
Once you find green circle remove your device and try to start after fixing Battery and Sim card and memory card.
If your phone is soft bricked... It will definitely boot up and it takes about 10 minutes at first boot up so keep patience..
HIT THANKS IF I HELPED YOU :good:
ndbhatt2006 said:
MrJukeHardbane,
First of all you need to download A116 Stock ROM, Drivers and SP Flash Tools by googling.
Then Remove your battery of the phone and SIM cards as well as Memory card,
Then install A116 Drivers in your PC then open SP flash tools window by double clicking on Flash_Tools.exe
the windows of SP Flash tool will open then click on Scatter Loading and search for the A116 Stock ROM you downloaded and extracted and find MT6589_Android_scatter_emmc file and open it
find the Download button on the upper side of window and click on it
Then connect your phone to PC with the data cable and try pressing volume up button and power butter simultaneously 3 to 4 times them you can see at the base of the window your phone will get detected and connected with the port and rest process will be done automatically wail till you see the green circle on the screen.
Once you find green circle remove your device and try to start after fixing Battery and Sim card and memory card.
If your phone is soft bricked... It will definitely boot up and it takes about 10 minutes at first boot up so keep patience..
HIT THANKS IF I HELPED YOU :good:
Click to expand...
Click to collapse
When I click the download button and connect USB, nothing is happening. It just get stuck to 0%
MrJukeHardbane said:
When I click the download button and connect USB, nothing is happening. It just get stuck to 0%
Click to expand...
Click to collapse
check if your phone connects with the usb port or not?
because this can happen if your phone drivers are not installed or wrong drivers installed
visit micromax website and download drivers for a116 from there first remove old one and install new one then try again.
HIT THANKS IF I HELPED YOU......
ndbhatt2006 said:
check if your phone connects with the usb port or not?
because this can happen if your phone drivers are not installed or wrong drivers installed
visit micromax website and download drivers for a116 from there first remove old one and install new one then try again.
HIT THANKS IF I HELPED YOU......
Click to expand...
Click to collapse
Phone is now detecting but i am not able to flash from SP tools, getting Error : BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5069). Haven't found any fix for this error yet.
MrJukeHardbane said:
Phone is now detecting but i am not able to flash from SP tools, getting Error : BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5069). Haven't found any fix for this error yet.
Click to expand...
Click to collapse
If your EMMC chip or RAM is damaged by Mobile repairing person then you will be helpless...
but if it is ok then once again try, this time in SP Flash tool select option "Format All + Download" then click on download button
remember never connect phone before the above steps only connect phone after u click on Download button
ndbhatt2006 said:
If your EMMC chip or RAM is damaged by Mobile repairing person then you will be helpless...
but if it is ok then once again try, this time in SP Flash tool select option "Format All + Download" then click on download button
remember never connect phone before the above steps only connect phone after u click on Download button
Click to expand...
Click to collapse
Where is this option Format all + download?
MrJukeHardbane said:
Where is this option Format all + download?[/Qwhi
which version of sp flash tools you use?
if its V5 or higher
then you will find it as per attached image.
Click to expand...
Click to collapse
ndbhatt2006 said:
MrJukeHardbane said:
Where is this option Format all + download?[/Qwhi
which version of sp flash tools you use?
if its V5 or higher
then you will find it as per attached image.
Click to expand...
Click to collapse
Still same error. I guess its as good as a paperweight now.
Click to expand...
Click to collapse
MrJukeHardbane said:
ndbhatt2006 said:
Still same error. I guess its as good as a paperweight now.
Click to expand...
Click to collapse
now there should be hardware problem you can get checked with service center.....
Click to expand...
Click to collapse
ndbhatt2006 said:
MrJukeHardbane,
First of all you need to download A116 Stock ROM, Drivers and SP Flash Tools by googling.
Then Remove your battery of the phone and SIM cards as well as Memory card,
Then install A116 Drivers in your PC then open SP flash tools window by double clicking on Flash_Tools.exe
the windows of SP Flash tool will open then click on Scatter Loading and search for the A116 Stock ROM you downloaded and extracted and find MT6589_Android_scatter_emmc file and open it
find the Download button on the upper side of window and click on it
Then connect your phone to PC with the data cable and try pressing volume up button and power butter simultaneously 3 to 4 times them you can see at the base of the window your phone will get detected and connected with the port and rest process will be done automatically wail till you see the green circle on the screen.
Once you find green circle remove your device and try to start after fixing Battery and Sim card and memory card.
If your phone is soft bricked... It will definitely boot up and it takes about 10 minutes at first boot up so keep patience..
HIT THANKS IF I HELPED YOU :good:
Click to expand...
Click to collapse
Can we flash custom roms from sp flash tool (the ones which we flash from Cwm recovery)
---------- Post added at 02:12 AM ---------- Previous post was at 02:08 AM ----------
ndbhatt2006 said:
MrJukeHardbane,
First of all you need to download A116 Stock ROM, Drivers and SP Flash Tools by googling.
Then Remove your battery of the phone and SIM cards as well as Memory card,
Then install A116 Drivers in your PC then open SP flash tools window by double clicking on Flash_Tools.exe
the windows of SP Flash tool will open then click on Scatter Loading and search for the A116 Stock ROM you downloaded and extracted and find MT6589_Android_scatter_emmc file and open it
find the Download button on the upper side of window and click on it
Then connect your phone to PC with the data cable and try pressing volume up button and power butter simultaneously 3 to 4 times them you can see at the base of the window your phone will get detected and connected with the port and rest process will be done automatically wail till you see the green circle on the screen.
Once you find green circle remove your device and try to start after fixing Battery and Sim card and memory card.
If your phone is soft bricked... It will definitely boot up and it takes about 10 minutes at first boot up so keep patience..
HIT THANKS IF I HELPED YOU :good:
Click to expand...
Click to collapse
And can u send link for stock Rom and drivers for mmx a116? Please
Hi Guys !!!
I recently Soft Bricked My A311 and it was totally DEAD !!!!!! BUT AFTER TWO DAYS HARD WORK FINALLY GOT IT WORKING TOTALLY FINE FROM DEAD STATE !!!!
FOR BRIEFLY EXPLAINING VIDEOS N SHOWING ACTUAL FLASHING CLICK HERE
When To Use My Meathod :-
1.Not able to flash any ROM (Every Rom Fails)
2.Error Message "Unable to mount /Data" OR "Unable to mount /cache" while flashing Rom
3.Internal Storage Error "No such directory exists "
4.Unable to Boot ur device in any way
The Only Meathod I Suggest Is To Flash Stock Rom Using YGDP tool ........
BEFORE ACTUAL PROCESS FOLLOW THESE STEPS !!!!!
1.First u need to Download Micromax A310/A311 Stock Rom and YGDP tool for for this click on this link -http://androidxda.com/download-micromax-stock-rom-models
2.U need a usb cable with Standard Configuration
3.And Offcourse Ur Bricked Device
Now The Actual Process>>>>>>>
1.Unzip The Download Stock ROM rar into any directory of ur Computer(WINDOWS) and after unziping u will get a file in .CPB Format
2.Install YGDP Tool on the System by clicking next next next but Dont Run
3.Now the most Important and the most Tricky Part To Install The Device Drivers On The System...... If u already have drivers installed then u dont need to do this part...........To do this there r different methods for different OS of windows but i prefer Windows 7.......... steps r given below:
a . Go to start in Windows
b. Right click on computer and open manage
c. Device Manager will open
d. Now remove the battery of ur bricked phone and connect it to the pc via the USB Cable
e. Just on connecting usb cable hold volume down button and quickly press the power button around 10 times for system to detect
f. Then the MT65XXX divers installation will get started on the system
h. When the installtion get finished unplug the usb cable
i. Now again plug the usb cable without battery on device and u will see aditional port in device manager for 3-5 Sec named as MTXXX preloder blah blah
4. Seting Up YGDP Tool:-
a.As Installed Earlier u will see a YDGP shortcut on deskop
b.If it Stops working then dont panic Just go to application setting and set compatibility to windows 7
c.Now on opening it will ask for password ........type 369 in password and press enter
d.then the application will start
e.Now u will see a Config Icon on the left top ........Open it
f.Now a window will open with devices on left and CPB select on right .......
h.Now on right side select 8297W_I01 for A310 and for A311 select 8297W only !!!1
g.Now on right side browse the CPB file in ur system which u got on unziping the stock ROM
h.Click Apply and the CPB file check will start ........it will take aroung 2-5 Min
i.on completion u will again come on the home page ...
j.Now on the left top side of the application u will see Start icon ......click on it
k.Now connect ur bricked device via usb cable without battery and in power off state
l.Now if everything went correct then the Cell 0 icon will change into downloading icon ......it means ur phone is detected
m.Flashing will automatically start and will take around 5min
n. On completion the Cell 0 will become 100%
o. Unplug usb cable
p. REBBOOT DEVICE!!!!!!
CONGRATES UR DEVICE WILL RISE FROM THE DEAD !!!!! ENJOY !!!!!!!
AND DONT FORGET TO HIT THANKS IF I HELPED
not working
amitsharad7 said:
Hi Guys !!!
I recently Soft Bricked My A311 and it was totally DEAD !!!!!! BUT AFTER TWO DAYS HARD WORK FINALLY GOT IT WORKING TOTALLY FINE FROM DEAD STATE !!!!
I WILL UPLOAD A VIDEO ON YOUTUBE OF WHOLE PROCESS SOON
When To Use My Meathod :-
1.Not able to flash any ROM (Every Rom Fails)
2.Error Message "Unable to mount /Data" OR "Unable to mount /cache" while flashing Rom
3.Internal Storage Error "No such directory exists "
4.Unable to Boot ur device in any way
The Only Meathod I Suggest Is To Flash Stock Rom Using YGDP tool ........
BEFORE ACTUAL PROCESS FOLLOW THESE STEPS !!!!!
1.First u need to Download Micromax A310/A311 Stock Rom
a. For A310 Stock ROM ....Download From NEEDROM
b. For A311 Stock ROM .....Download From NEEDROM
2.Now Download YGDP FLASH TOOL from NEEDROM MICROMAX A311 SECTION THERE U WILL FIND THE DOWNOAD OPTION OR SEARCH WEB (JUST DOWNLOAD THE TOOL)
3.U need a usb cable with Standard Configuration
4.And Offcourse Ur Bricked Device
Now The Actual Process>>>>>>>
1.Unzip The Download Stock ROM rar into any directory of ur Computer(WINDOWS) and after unziping u will get a file in .CPB Format
2.Install YGDP Tool on the System by clicking next next next but Dont Run
3.Now the most Important and the most Tricky Part To Install The Device Drivers On The System...... If u already have drivers installed then u dont need to do this part...........To do this there r different methods for different OS of windows but i prefer Windows 7.......... steps r given below:
a . Go to start in Windows
b. Right click on computer and open manage
c. Device Manager will open
d. Now remove the battery of ur bricked phone and connect it to the pc via the USB Cable
e. Just on connecting usb cable hold volume down button and quickly press the power button around 10 times for system to detect
f. Then the MT65XXX divers installation will get started on the system
h. When the installtion get finished unplug the usb cable
i. Now again plug the usb cable without battery on device and u will see aditional port in device manager for 3-5 Sec named as MTXXX preloder blah blah
4. Seting Up YGDP Tool:-
a.As Installed Earlier u will see a YDGP shortcut on deskop
b.If it Stops working then dont panic Just go to application setting and set compatibility to windows 7
c.Now on opening it will ask for password ........type 369 in password and press enter
d.then the application will start
e.Now u will see a Config Icon on the left top ........Open it
f.Now a window will open with devices on left and CPB select on right .......
h.Now on right side select 8297W_I01 for A310 and for A311 select 8297W only !!!1
g.Now on right side browse the CPB file in ur system which u got on unziping the stock ROM
h.Click Apply and the CPB file check will start ........it will take aroung 2-5 Min
i.on completion u will again come on the home page ...
j.Now on the left top side of the application u will see Start icon ......click on it
k.Now connect ur bricked device via usb cable without battery and in power off state
l.Now if everything went correct then the Cell 0 icon will change into downloading icon ......it means ur phone is detected
m.Flashing will automatically start and will take around 5min
n. On completion the Cell 0 will become 100%
o. Unplug usb cable
p. REBBOOT DEVICE!!!!!!
CONGRATES UR DEVICE WILL RISE FROM THE DEAD !!!!! ENJOY !!!!!!!
IF U FACE ANY PROBLEM ANYWHERE AND WHATSAPP ME OR CALL ME EVEN ON 9927445068 BECAUSE I KNOW KI JAB PHONE BRICK HOTA HE TOH KITNE FHATI HE!!!!
AND DONT FORGET TO HIT THANKS IF I HELPED
Click to expand...
Click to collapse
i also bricked my nitro a311.... all checked all the step above.. but it stuck at the entering download mode .. nothing happens after thst..
please help me
I can't install the driver thats my prolem
Help me
Refer this
Ben02 said:
I can't install the driver thats my prolem
Help me
Click to expand...
Click to collapse
bro i had explained in detail .. you can visit it here...
http://forum.xda-developers.com/a310/help/solved-unbricked-a311-a310-nitro-t3187580
got stsuck
A311.. entering download mode... got stuck here help me help me!.. please
bro .. you can try to flash the stock ROM.... I will surely fix the problem... refer the link given in above reply
Thanks for your help. It might be so help ful for everyone
Sent from my Micromax A311 using XDA Free mobile app
My computer didn't detect my a311.So what can I do??? Pls help me...I have vcom,sp tool drivers and more
Sent from my Micromax A311
thanks for the procedure
fails in ygdp @ 83 percent everytime
ygdp tool fails while downloading the cpb
:crying::crying: a311
I m facing a problem. It stuck in 98%. I cant flash the rom. I download the rom and ygdp tool and install drivers successfully. After i choose 8297w for my a311 and select the cpb file. It unzib the file and so on. Then i select start the cell 0 is entered in download mode and stuck in 98%. Please help me buddy
moulishankar said:
I m facing a problem. It stuck in 98%. I cant flash the rom. I download the rom and ygdp tool and install drivers successfully. After i choose 8297w for my a311 and select the cpb file. It unzib the file and so on. Then i select start the cell 0 is entered in download mode and stuck in 98%. Please help me buddy
Click to expand...
Click to collapse
I'm too stuck with the same issue. But I've some what positive progress. It shows in 25 secs the failure message. So please help me too!!
Note: complete history of my case can be found here!
Thanks It works
Thanks for the post it saved me a lot troubles. .Had trouble finding free MT65XX. Please donwlaod it from by searching "SP flash tool + mediatek" mt65xx.
amitsharad7 said:
Hi Guys !!!
I recently Soft Bricked My A311 and it was totally DEAD !!!!!! BUT AFTER TWO DAYS HARD WORK FINALLY GOT IT WORKING TOTALLY FINE FROM DEAD STATE !!!!
FOR BRIEFLY EXPLAINING VIDEOS N SHOWING ACTUAL FLASHING CLICK HERE
When To Use My Meathod :-
1.Not able to flash any ROM (Every Rom Fails)
2.Error Message "Unable to mount /Data" OR "Unable to mount /cache" while flashing Rom
3.Internal Storage Error "No such directory exists "
4.Unable to Boot ur device in any way
The Only Meathod I Suggest Is To Flash Stock Rom Using YGDP tool ........
BEFORE ACTUAL PROCESS FOLLOW THESE STEPS !!!!!
1.First u need to Download Micromax A310/A311 Stock Rom and YGDP tool for for this click on this link -http://androidxda.com/download-micromax-stock-rom-models
2.U need a usb cable with Standard Configuration
3.And Offcourse Ur Bricked Device
Now The Actual Process>>>>>>>
1.Unzip The Download Stock ROM rar into any directory of ur Computer(WINDOWS) and after unziping u will get a file in .CPB Format
2.Install YGDP Tool on the System by clicking next next next but Dont Run
3.Now the most Important and the most Tricky Part To Install The Device Drivers On The System...... If u already have drivers installed then u dont need to do this part...........To do this there r different methods for different OS of windows but i prefer Windows 7.......... steps r given below:
a . Go to start in Windows
b. Right click on computer and open manage
c. Device Manager will open
d. Now remove the battery of ur bricked phone and connect it to the pc via the USB Cable
e. Just on connecting usb cable hold volume down button and quickly press the power button around 10 times for system to detect
f. Then the MT65XXX divers installation will get started on the system
h. When the installtion get finished unplug the usb cable
i. Now again plug the usb cable without battery on device and u will see aditional port in device manager for 3-5 Sec named as MTXXX preloder blah blah
4. Seting Up YGDP Tool:-
a.As Installed Earlier u will see a YDGP shortcut on deskop
b.If it Stops working then dont panic Just go to application setting and set compatibility to windows 7
c.Now on opening it will ask for password ........type 369 in password and press enter
d.then the application will start
e.Now u will see a Config Icon on the left top ........Open it
f.Now a window will open with devices on left and CPB select on right .......
h.Now on right side select 8297W_I01 for A310 and for A311 select 8297W only !!!1
g.Now on right side browse the CPB file in ur system which u got on unziping the stock ROM
h.Click Apply and the CPB file check will start ........it will take aroung 2-5 Min
i.on completion u will again come on the home page ...
j.Now on the left top side of the application u will see Start icon ......click on it
k.Now connect ur bricked device via usb cable without battery and in power off state
l.Now if everything went correct then the Cell 0 icon will change into downloading icon ......it means ur phone is detected
m.Flashing will automatically start and will take around 5min
n. On completion the Cell 0 will become 100%
o. Unplug usb cable
p. REBBOOT DEVICE!!!!!!
CONGRATES UR DEVICE WILL RISE FROM THE DEAD !!!!! ENJOY !!!!!!!
AND DONT FORGET TO HIT THANKS IF I HELPED
Click to expand...
Click to collapse
Great work... and very nice explanation.... keep goingg....
@moulishankar @sugarmurali
What did u do next after YGDP stuck at 98% for A311?
Andy5.1 said:
@[email protected]
What did u do next after YGDP stuck at 98% for A311?
Click to expand...
Click to collapse
Shut down and close computer thats all
someone please help me....i followed all the above steps but not getting success. The moment i click on Start nothing happens, it just says Entering Download mode and nothing happens. Please help me !!!
+91 9920778298 - Please help me !!!
still stuck on micromax logo after flashing 100%
hi please i have flashed rom via ygdp it shows 100% success but when i boot my a311 it stuck on micromax logo and i have also tried factory mode fix but after commanding ADB Shell it promt no device found.. Plz help me thanks in advance
Bricked micromax canvas a 311
My micromax canvas is not detecting in my system, I have installed all drivers manually. Some time it is stuck in bootloop, some times it get booted to a black screen and shows up setting stopped. But I can boot into recovery mode. Some one please tell me how to flash from memory card. No driver like adb or vcom detects my phone. I tried flash using fastboot mode but it is not detected. Please someone tells me a solution
Now, i have seen countless cases of people being not able to flash their MMX A311, as for me I was having the same problem too, turns out that the driver is the main problem.
I was trying out YGDP but i was stuck at "Enabling Download Mode"
and while trying out SP tools i was getting an error "s_brom_cmd_jump_da_fail (0x7f3) " .
Then again, I tried many things, and got my phone working in 10 minutes. :good:
So if u too are stuck, then try my method.
It is highly recommended you do this in Windows 7.
I did everything while my phone was switched off but battery was inserted.
Disconnect your PC from internet just to be double careful about the flashing.
First getting the proper driver:
Now, before installing the driver, make sure that you dont have any other driver installed rather than the one which i will provide, if you think you might have installed some other driver then try removing it by "usdreview" (but it didn't work for me though that's why PLEASE TRY THIS ON ANOTHER COMPUTER OR LAPTOP, MAYBE IF YOU HAVE ANOTHER LAPTOP OR COMPUTER OR MAYBE TRY IT ON YOUR FRIEND'S SYSTEM. THIS SOLVED THE "ENABLING DOWNLOAD MODE" PROBLEM FOR ME)
Download this driver, I did with this one:
Remove the (dot) and put " . " in the link. .
www(dot)mediafire(dot)com/file/8v32j8h5doflzi0/Mediatek+MT65xx+Preloader+Driver(dot)rar
Click to expand...
Click to collapse
Extract it and remember where the folder has been extracted to, as it will be needed to install the driver.
Installing the driver:
Open up Device Manager.
right click on My Computer > Manage > on the side pane click on "Device Manager"
Keep it open.
Now first CHOOSE A SINGLE USB PORT WHICH WILL BE USED BY YOU THROUGHOUT THIS WHOLE PROCESS. DON'T CHANGE IT!
Now use your usb data cable and insert it into your chosen USB port and then to your phone.
As you will insert it you will see a device popup in 'Other Devices' or some other tab named as "MTK65xx Preloader" or something similar like that.
NOW BE QUICK IT DISAPPEARS IN 3-4 SECONDS !!
Quickly right click on mtk65xx preloader and select "Update Driver Software"
Now as in the new window opened up, select " Browse my own computer to install the driver"
Browse to the DOWNLOADED DRIVER'S folder, select the folder "Win7" for Windows 7 and Above.
Now the driver will be installed.
Now after being installed, take out your phone from the usb cable, dont remove the usb cable from the computer because you make mistake while again inserting it back into to a different port.
Getting the stock rom and YGDP tool:
Now get the stock rom for A311 and YGDP tool from any verified site.
I downloaded mine from :
Remove the (dot) and put " . " in the link.
www(dot)needrom(dot)com/download/micromax-a311
Click to expand...
Click to collapse
Download from this site needs user to be logged in, it barely took 2 mins for me to register and download it.
If you have any other site you trust then go on and download it from there, but I recommmend you to follow my steps and sites as I did everything and succeeded.
Download the ROM and also the YGDP tool.
Extract the downloaded file to some specific folder as this is the ROM and the tool required.
Installing and Using the YGDP tool:
I have seen people recommending latest YGDP tool but on the contrary I recommend the downloaded old version from the previous step, it worked for me like a charm!!
Install the YGDP tool from the extracted folder.
After installation, YGDP desktop icon will appear, open it.
put the password as: 369
Now, on the top pane, press the button "Config"
In the window opened, on the side pane, carefully select "8297W" for A311
And after selecting that, on the left side section,
in the " Please select CPB file : " , click on the button beside it and browse for your extracted folder of ROM and select it !
now it click " Apply " button .
It will take 1-2 minutes, and after this you will be brought back to the main window!
Now click on " Start "
And wait till in the bottom message log it says " ENABLING DOWNLOAD MODE" , now follow the next step !!
Flashing your phone:
As YGDP stays in enabling download mode, now insert your phone back to the usb cable which was left out in the computer.
Now, if you did everything correctly, YOUR PHONE WILL BE DETECTED and YGDP will start flashing by itself, wait till it says 100% with a green bar.
Remove your phone from the USB cable and then click "STOP" in the main window of the YGDP tool.
Power on your phone.
Your phone will be successfully be flashed and alive !!! :fingers-crossed:
FROM NOW ON, ALWAYS MAKE A BACKUP . :silly:
Feel free to ask questions. :laugh:
If u have suggestions, I'm open for it!! :laugh:
While I am connecting to the computer it does not recognise it and continuously connecting and disconnecting the USB drive and I have tried different ways like why GDP tool and SP Flash tool when I tried with why GDP tool it struck at the entering download mode and when I tried with SP Flash tool it recognise the device but ends with an error message finally the problem is my computer is not detecting the device properly and I have install the drivers manually also but of no use now I am not able to go for go to the recovery mode my phones is continuously rebooting please help me thanks in advance
as you said i have done all the things, and its turned out as green bar. everything is ok, but while power on my device it will only shows the micromax logo it wont go further... kindly suggest me about what to do next...
anyone active here?