Hi,
I just get The i337 S4 broken screen of my nephew I've repaired. This is a purchased s4 rewrapped on Cdiscount in France. Everything works, all tests *#0*# are ok, receiver allows me to test the hp listening, it works fine and I can record my voice with the voice recorder application.
My nephew told me from the beginning, in a phone call, he and the called heard nothing and no sound, actually after repairing the screen I saw this defect.
With PHONE INFO :
Code Produit: SGH21337ZWMTGY
Nom du CSC d'origine: TGY
Nom du CSC du Firmware : TGY
Nom du CSC actuel: TGY
Codes CSC disponibles: "vide"
Pays du CSC: Hong Kong / NA
Opérateur mobile: 20820 / 20801
Version du Bootloader: I337UCUFNB1
Version du PDA: I9505ZHUFNB3
Version du CSC: I337UCUFNB1
Version de la Bande de Base: I337UCUFNB1
Dernier Firmware : I9505ZHUHOK2/I9505ZZHHOK2/I9505ZHUHOK2
Version du Kernel: 3.4.0-1125940 [email protected] # 1 32-bit
Machine Virtuelle Java: Dalvik 1.6.0
But with the command *#1234# :
AP: I9505ZHUFNB3
CP: I9505ZHUFNB3
CSC: I9505ZHUFNB3
ROOT CHECK :
Root check details:
BINARY: /system/xbin/su
VERSION : 1.99:SUPERSU
INSTALLED : 1 janv. 2014 18:27
PERMISSIONS : rwxr-xr-x(755)
ADB ROOT : ENABLE
SELINUX : Enforcing
I tried to put a ROM ATT:
Model SGH-I337
Model name GALAXY S4
Country USA (AT&T)
Version Android 4.2.2
Changelist 453947
Build date Sat, 27 Apr 2013 08:16:31 +0000
Security Patch Level N/A
Product code ATT
PDA I337UCUAMDL
CSC I337ATTAMDL
But Odin3 fail! :
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
ODIN MODE
PRODUCT NAME : SGH-I337
CURRENT BINARY : Samsung Official
SYSTEM STATUS : Official
KNOX KERNEL LOCK : 0x0
KNOX WARRANTY VOID : 0x0
CSB-CONFIG-LSB : 0x30
WRITE PROTECTION : Enable
eMMC BURST MODE enabled
Start [224, 1440]
SW REV. CHECK FAIL : found: 5. Binary: 1
What do you think about no sound in call ?
I live in France ( Europe).
Perhaps it's because "Opérateur mobile: 20820 / 20801" is wrong .
I am a novice.
Can you help me please ?
Thank you.
ricangus said:
Hi,
I just get The i337 S4 broken screen of my nephew I've repaired. This is a purchased s4 rewrapped on Cdiscount in France. Everything works, all tests *#0*# are ok, receiver allows me to test the hp listening, it works fine and I can record my voice with the voice recorder application.
My nephew told me from the beginning, in a phone call, he and the called heard nothing and no sound, actually after repairing the screen I saw this defect.
With PHONE INFO :
Code Produit: SGH21337ZWMTGY
Nom du CSC d'origine: TGY
Nom du CSC du Firmware : TGY
Nom du CSC actuel: TGY
Codes CSC disponibles: "vide"
Pays du CSC: Hong Kong / NA
Opérateur mobile: 20820 / 20801
Version du Bootloader: I337UCUFNB1
Version du PDA: I9505ZHUFNB3
Version du CSC: I337UCUFNB1
Version de la Bande de Base: I337UCUFNB1
Dernier Firmware : I9505ZHUHOK2/I9505ZZHHOK2/I9505ZHUHOK2
Version du Kernel: 3.4.0-1125940 [email protected] # 1 32-bit
Machine Virtuelle Java: Dalvik 1.6.0
But with the command *#1234# :
AP: I9505ZHUFNB3
CP: I9505ZHUFNB3
CSC: I9505ZHUFNB3
ROOT CHECK :
Root check details:
BINARY: /system/xbin/su
VERSION : 1.99:SUPERSU
INSTALLED : 1 janv. 2014 18:27
PERMISSIONS : rwxr-xr-x(755)
ADB ROOT : ENABLE
SELINUX : Enforcing
I tried to put a ROM ATT:
Model SGH-I337
Model name GALAXY S4
Country USA (AT&T)
Version Android 4.2.2
Changelist 453947
Build date Sat, 27 Apr 2013 08:16:31 +0000
Security Patch Level N/A
Product code ATT
PDA I337UCUAMDL
CSC I337ATTAMDL
But Odin3 fail! :
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
ODIN MODE
PRODUCT NAME : SGH-I337
CURRENT BINARY : Samsung Official
SYSTEM STATUS : Official
KNOX KERNEL LOCK : 0x0
KNOX WARRANTY VOID : 0x0
CSB-CONFIG-LSB : 0x30
WRITE PROTECTION : Enable
eMMC BURST MODE enabled
Start [224, 1440]
SW REV. CHECK FAIL : found: 5. Binary: 1
What do you think about no sound in call ?
I live in France ( Europe).
Perhaps it's because "Opérateur mobile: 20820 / 20801" is wrong .
I am a novice.
Can you help me please ?
Thank you.
Click to expand...
Click to collapse
Have you tried simply restarting the phone? You can also try reinstalling the device's firmware through the recovery mode (It resets everything and thus should theoretically work). If all else fails you can try contacting a technical support officer for your device's company. You can also take it to a technical expert nearby to try and fix it for you.
Hi,
I've done a reset.
I've done a "POWER OFF" "POWER ON".
What do you want to say by " tried simply restarting the phone ? "
Can you explain me how to reinstal the device's firmware through the recovery mode ? With what firmware ?
Thank you.
ricangus said:
Hi,
I've done a reset.
I've done a "POWER OFF" "POWER ON".
What do you want to say by " tried simply restarting the phone ? "
Can you explain me how to reinstal the device's firmware through the recovery mode ? With what firmware ?
Thank you.
Click to expand...
Click to collapse
To reinstall the device's firmware:
1. Boot into recovery mode (for your device I think you have to hold the power, home and volume up buttons when your device ID powered off)
2. Select the option to factory reset (this resets everything) or there may be the option wipe cache partition and hence delete all user data
3. Wait for the device to reset (about 5 min) and thus reinstall it's firmware
The issue should most likely be solved if it is a software issue
Hi,
I've done a wipe data/factory, I redid a wipe, but no voices when I 'm calling again.
Have you another idea ?
Thank you.
ricangus said:
Hi,
I've done a wipe data/factory, I redid a wipe, but no voices when I 'm calling again.
Have you another idea ?
Thank you.
Click to expand...
Click to collapse
If the factory reset didn't restore the voices then it's probably not a software issue; it maybe in fact be a hardware issue. You should probably consider going to a technical expert on phone hardware and try to get it fixed.
Hi,
Can we replace a S4 I337 motherboard by a I9505 motherboard in I337 phone?
thank you.
ricangus said:
Hi,
Can we replace a S4 I337 motherboard by a I9505 motherboard in I337 phone?
thank you.
Click to expand...
Click to collapse
I don't think that's a good idea, especially if you don't really have a good idea of what you are doing. Replacing a phone's motherboard should technically work but given all the fragile parts and such in the phone, it can really damage it if any mistakes or errors were to be made
Waiting ADB device... OK
Reading phone info...
Model: SM-G570F
Android version: 6.0.1
PDA version: G570FXXU1APL4
CSC version: G570FODD1APK2
Phone version: G570FXXU1APJ3
Product code:
CSC country code: India
CSC sales code: INS
Phone SN:
IMEI: 000000000000000
HW version:
RF cal date:
Chip name: EXYNOS7570
Modem board: SHANNON305
Security patch: 2016-12-01
Boot Warranty bit: 1
Checking Super user right... true
Writing NV Data... OK
Recalculating MD5... OK
Deleting backup... OK
Write NV Data done
Done with Samsung Tool PRO v.32.4
when write cert .......
Operation: Write CERT
Selected model: SM-G570F
Software version: 32.4
Waiting ADB device... OK
Reading phone info...
Model: SM-G570F
Android version: 6.0.1
PDA version: G570FXXU1APL4
CSC version: G570FODD1APK2
Phone version: G570FXXU1APJ3
Product code:
CSC country code: India
CSC sales code: INS
Phone SN:
IMEI: 000000000000000
HW version:
RF cal date:
Chip name: EXYNOS7570
Modem board: SHANNON305
Security patch: 2016-12-01
Boot Warranty bit: 1
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Modem board: SHANNON305
HWID: 48 1B A9 10 1D 21 98 9B 55 4F B8 AF 0A 00 00 00
Calculating... error
Security damaged (hmac mismatch)
Done with Samsung Tool PRO v.32.4
i have same problem any 1 help pliz
After a factory reset my tablet would not boot. At first it took me 4 days to power up the tablet. The tablet does not go further than the Recovery booting... then turns off. (Android Recovery does not boot & OS does not boot).
Things a have tried:
Power + Vol Down + Home for Download Mode
Flashed Firmware T820XXU2BRL1 - GALAXY TAB S3 SM-T820 XAR CELLULAR SOUTH - with Odin 3.13.3.
Version Android 8.0.0
Changelist 14977309
Build date Wed, 12 Dec 2018 04:35:32 +0000
Security Patch Level 2018-12-01
Product code XAR
PDA T820XXU2BRL1
CSC T820XAR2BRL1
After I flashed the firmware it still does not boot.
Any ideas???
Current Status:
Odin Mode ( High Speed)
Product Name: SM-T820
Current Binary: Samsung Official
System Status: Official
FRP Lock: Off
OEM Lock: On
DID: 03ea61650a86
Warranty Void: 0x0
Qualcomm Secureboot: Enable
RPSWREV: B2(1, 1, 1, 1, 1) K1 S1
Secure Download: Enable
CCIC: S2MM005 HW: 4 Boot: 6 Main: d5
I've been trying to flash this phone all day, i've encountered the following errors:
sw rev. check fail(bootloader) device 3 binary 2
I cannot seem to find a fix for this, any suggestions?
My tryouts to fix it:
Swapped the usb, port, driver, installed samsung usb driver, switched odin versions from 3.14 to 3.13.3.
Tried 2 diferent firmwares, both show me the same error.
Thank you in advance. :laugh:
i cannot add the picture,
Odin Mode
Download Speed: Fast
Product: Listed Above
Curent Binary: Samsung Official
KG STATE : Prenormal
FRP LOCK: ON
OEM LOCK: ON(L)
Secure Download : Enabled
Carrier_id OMN
Warranty void 0
RP SWREV B:3 K3 S:3
SW REV. CHECK FAIL(BOOTLOADER) DEVICE :3 BINARY: 2
Hello Guys ,
Need S23 ultra S918B Indian ins firmware please help
Thank you
Get with Frija. You can manual download for EUX (Which is available), Both are part of OXM group so there won't be any difference between INS and EUX
Open Frija
Fill details like this
- Model : SM-S918B
- Region : EUX
- Enable manual instead of auto then
- PDA and CP slot write : S918BXXU1AWA6
- CSC slot write : S918BOXM1AWA6
Now you should able to download firmare
dr.ketan said:
Get with Frija. You can manual download for EUX (Which is available), Both are part of OXM group so there won't be any difference between INS and EUX
Open Frija
Fill details like this
- Model : SM-S918B
- Region : EUX
- Enable manual instead of auto then
- PDA and CP slot write : S918BXXU1AWA6
- CSC slot write : S918BOXM1AWA6
Now you should able to download firmare
Click to expand...
Click to collapse
Thank you buddy