Related
Hi, everyone
i try to make cwm touch + newest version running on stock with GingerDX
I need testers since i have no time to test it myself
in attachment there is the cwm-rec.tar
if you're on stock kernel could you please try it
just copy it into /system/bin and set permission to all allowed(read,write,execute)(dont need all, but so it's simplier)
Be sure to have a backup, which you can launch with FPX/X-recovery
after overwriting cwm it's possible its not working anymore
please report back
if it works, dont work, dont start recovery and hangs up on boot or it starts and no touch, and so on
------------------------------------------------EDIT-------------------------------------------------------------------------
thank you all for you're replies
there were some problems mounting partitions, but now everything should work in this recovery, except touch
i'm still workin on that
and about naa-kernel, recovery actually it is possible, maybe if i have free time I'll make some workaround for loading an other recovery, even if it is completly pointless
check attachments for the "working" recovery THE NEW ONE IS THE ZIPPED
Screensh0t???
daddy_rhon said:
Screensh0t???
Click to expand...
Click to collapse
OMG!!!
This is CWM boss....
Think before you ask!!!!
Can you use it on nAa kernel?
Sent from my E15i using XDA Premium!
soumyasree said:
OMG!!!
This is CWM boss....
Think before you ask!!!!
Click to expand...
Click to collapse
You can still take screenshot with ddms.bat
Think before you speak
------------------
Is this the same recovery as the recovery that comes with Alfs kernel?
if you can replace in the kernel ramdisk file the recovery then the answer is yes, any other situation the answer is no...
soumyasree said:
OMG!!!
This is CWM boss....
Think before you ask!!!!
Click to expand...
Click to collapse
heheheh...I just only want to see the feature or whats inside of it cOmpare to other cwm,because i dont have idea what is look of touchrecovery,for now sounds good because its touch recovery...
DanneB. said:
Can you use it on nAa kernel?
Sent from my E15i using XDA Premium!
Click to expand...
Click to collapse
read before you post
THIS IS FOR STOCK KERNEL
and i dont know if works yet, this is why i need testers?
djnilse said:
read before you post
THIS IS FOR STOCK KERNEL
and i dont know if works yet, this is why i need testers?
Click to expand...
Click to collapse
I was woundering if you are gonna make it to nAa kernel.
Please hit Thanks button to support me!
Sent from my E15i using XDA Premium!
@djnilse
I tried it and the recovery is working for me but no touch.
But good work. Keep it up.
DanneB. said:
I was woundering if you are gonna make it to nAa kernel.
Please hit Thanks button to support me!
Sent from my E15i using XDA Premium!
Click to expand...
Click to collapse
very simple explanation...
nAa kernel (or any other custom kernel for that matter) already has CWM builtin
stock kernel does not.
now why in the world would anyone wanna make a CWM for a kernel that already has it?? if there really was... how does one invoke it?
also, u can forget about nAa making a kernel with touch CWM... go read his explanation why if u wanna know
Chris95X8 said:
You can still take screenshot with ddms.bat
Think before you speak
------------------
Is this the same recovery as the recovery that comes with Alfs kernel?
Click to expand...
Click to collapse
yes exactly
and anyone should know what cwmr looks like
atis112 said:
@djnilse
I tried it and the recovery is working for me but no touch.
But good work. Keep it up.
Click to expand...
Click to collapse
Confirmed... jumps into recovery but no response to touch.
*shakes fist at Stock Kernel*
Can someone tell me how to install this pls? D:
I installed xRecovery a long time ago... can I have both?
ty
Hi, i've tried to install this with Flashtool or manually put the files on system/bin and it didn't work. Someone please could post a more detailed tutorial or a update.zip? Thanks.
I try it : thanks djnilse
Lisa cihazımdan Tapatalk 2 ile gönderildi
Coffinator said:
Hi, i've tried to install this with Flashtool or manually put the files on system/bin and it didn't work. Someone please could post a more detailed tutorial or a update.zip? Thanks.
Click to expand...
Click to collapse
A more detailed tutorial is not needed.. You really just need to read what is written on the post first and be able to follow the instructions..
You haven't done this most simple of thngs..
Remember this is not a finished product and you may experience issues.. Report your issues as the OP has requested instead of asking for an update!
CtrlAltDelIrl said:
A more detailed tutorial is not needed.. You really just need to read what is written on the post first and be able to follow the instructions..
You haven't done this most simple of thngs..
Remember this is not a finished product and you may experience issues.. Report your issues as the OP has requested instead of asking for an update!
Click to expand...
Click to collapse
You really didn't understand the part where i ask for a possible update.ZIP, didn't you?
Coffinator said:
You really didn't understand the part where i ask for a possible update.ZIP, didn't you?
Click to expand...
Click to collapse
What makes you think I didn't understand? I understood totally..
This is a dev thread.. We should try to reply to the devs requests.. Not make more..
You messed up totally because you didn't read the OPs post and follow his instructions..
You'd probably try something foolish like use flashtool to install the update.zip anyway..
Kids these days!
CtrlAltDelIrl said:
What makes you think I didn't understand? I understood totally..
This is a dev thread.. We should try to reply to the devs requests.. Not make more..
You messed up totally because you didn't read the OPs post and follow his instructions..
You'd probably try something foolish like use flashtool to install the update.zip anyway..
Kids these days!
Click to expand...
Click to collapse
This is a forum and i have the right to post. If you don't like, IGNORE IT, don't try to be a yes-man to the developers, they don't need it.
Hello XDA..!!
As we know it is currently becoming a Huge problem of not Working Touch screens by installing roms of other Devices ..!!
I heard that problem of my friend Echo juned .. know coming to you with 100% fixed this problem
Instructions..!! To fix ..!!
Download THIS firmware..!! (It is modified Active firmware .42 GB)
Flash it using "flashtool"
boot u r device (first boot can take 10 mins)
and u will see u r touch screen working know..!!..!!
After that install Your device FTF ..
Working on all devices ..!!
Hope this will help...!!..!!
Fix no 2
thanks to eh.zamani
by this tutorial:
1:flash your device gb .62 firmware
2:flash rage kernel
3:flash that wrong rom again
4:if wrong rom was ics,rom will not boot then remove the battery to turn phone off then flash .62 firmware again if it was gb,do the same work
5:wait until stock rom boots the touch will be fixed
Credit's..!!
xshanep19 (this is all his efforts) SPECIAL THANKS TO HIM
regards ..!!
officiallysonyrebel
downloading will test it on xperia mini sti5i which i killed touchscreen by other rom
dragonmasterx said:
downloading will test it on xperia mini sti5i which i killed touchscreen by other rom
Click to expand...
Click to collapse
ok.. plz report ..!!
not working on xperia mini tested it now
touchscreen works but not correctly i will try to flash an ics original kernel and the ics original ftf
MAN YOU STOLE THIS FIX!
Please ask xshanep19 and if you get the permissions to open the thread, give credits to him!
Here's his original post:
xshanep19 said:
I had same problem, i accidently installed something on my xperia mini which was for mini pro which caused touch screen to stop working, i flashed different stock firmware and so on, still the touch screen wouldnt work
i flashed Xperia Active (ST17i) firmware 4.0.2.A.0.42_CE.ftf onto my xperia mini (st15i) in flashtool, then flashed stock mini firmware 4.0.2.A.0.62 afterwards
my touchscreen is working again
im not sure if this will work for anyone else, just thought id share what i did...
Click to expand...
Click to collapse
So please ask him, this is the way we're doing it on xda!
mihahn said:
MAN YOU STOLE THIS FIX!
Please ask xshanep19 and if you get the permissions to open the thread, give credits to him!
Here's his original post:
So please ask him, this is the way we're doing it on xda!
Click to expand...
Click to collapse
Deleted
officiallysonyrebel said:
srry didn't know about that cause was working on it .. since 1 month and got this fix ... and it not exactly same because i have changed some files
in active ftf..!! and i make fixes of my own and if i share fixes by other's I always write share there..!!
Click to expand...
Click to collapse
You can't change files in ftf, because ftf is sony signed so this is impossible! So I think you took it from the post I mentioned before!
Delete...
Till-Kruspe said:
Delete...
Click to expand...
Click to collapse
Reported it, too. Let's see how the mod decides!
officiallysonyrebel as stated this has been shared previously however not in it's own thread so in the spirit of sharing it's fine to post it up however you must give credits to where you found it. It also seems that your guide is not complete as you can't stop at just flashing the active FTF which is a stock Sony file not modified so please don't tell people it is. For it to fully work you need to then flash the stock firmware for the device over the top as per xshanep19's instructions.
To clear everything up please complete your instructions and also link to xshanep19's post to say the instructions are also there but you're just making them available for everyone who might not see that post.
Thanks
AvRS
AvRS said:
officiallysonyrebel as stated this has been shared previously however not in it's own thread so in the spirit of sharing it's fine to post it up however you must give credits to where you found it. It also seems that your guide is not complete as you can't stop at just flashing the active FTF which is a stock Sony file not modified so please don't tell people it is. For it to fully work you need to then flash the stock firmware for the device over the top as per xshanep19's instructions.
To clear everything up please complete your instructions and also link to xshanep19's post to say the instructions are also there but you're just making them available for everyone who might not see that post.
Thanks
AvRS
Click to expand...
Click to collapse
thanx mod doing it asap .. because when i was editing it my internet connection (doesn't know What happen..!!)
mihahn said:
MAN YOU STOLE THIS FIX!
Please ask xshanep19 and if you get the permissions to open the thread, give credits to him!
Here's his original post:
So please ask him, this is the way we're doing it on xda!
Click to expand...
Click to collapse
srry bro It was not me with this account .. was in tution at that time and my younger just messed up everything sorry again..!! hope u understand..!!:angel:
Btw I don't think that the phone will boot up completely with the active ftf. I think you have to flash the ftf for your device first, before you will get it booting, or am I wrong?
mihahn said:
Btw I don't think that the phone will boot up completely with the active ftf. I think you have to flash the ftf for your device first, before you will get it booting, or am I wrong?
Click to expand...
Click to collapse
nope i think as from one person .. used this and he said that phone is booting and touch screen is working .. but not correctly u just have to flash Your specific device FTF ..!! and touch screen working after that..!!
officiallysonyrebel said:
nope i think as from one person .. used this and he said that phone is booting and touch screen is working .. but not correctly u just have to flash Your specific device FTF ..!! and touch screen working after that..!!
Click to expand...
Click to collapse
Okay this could work, just thought because of different libs...
But I won't test it and tinker with my touchscreen
mihahn said:
Okay this could work, just thought because of different libs...
But I won't test it and tinker with my touchscreen
Click to expand...
Click to collapse
Please confirm if anyone Succeded
Sent from my S7 using xda premium
---------- Post added at 09:37 PM ---------- Previous post was at 09:27 PM ----------
Is it work for unlock BL Or just for lockBL, Thanks
Sent from my S7 using xda premium
sjeik1985 said:
Please confirm if anyone Succeded
Click to expand...
Click to collapse
I know it doesn't work for me. I already replied in the other thread as well
stuck at flashtool
I followed the steps as mentioned by you and while flashing you given rom i get this error....
ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_STATIC="IMAGE_ADDRESS_RANGE";ERR_DYNAMIC="SIN-block eraseblock mismatch";
and it aborts flashing......may i know where i am going wrong. I am desperate to get my phone working.:crying:
Arbelzapf said:
I know it doesn't work for me. I already replied in the other thread as well
Click to expand...
Click to collapse
What's ur device? It's lockBL or unlockBL
Sent from my S7 using xda premium
Xperia mini pro with locked bl:fingers-crossed:
by the way i have unlocked the bl and proceeded but no results yet
Hi Guys .Today I had flashed Project XV-R 1.4.2 till Now it was very good:laugh: But I miss Google Now very very much and the stock widgets like clock and tools at least !!!!
any one Could help and tell me how to get them?????
Thanx
No one !!!! ????? just all i want Google Now and Sony Stock Widgets!!! just like a cwm zip :silly: please!!!:crying::crying:
thanx again:good:
Romans.2012.h said:
No one !!!! ????? just all i want Google Now and Sony Stock Widgets!!! just like a cwm zip :silly: please!!!:crying::crying:
thanx again:good:
Click to expand...
Click to collapse
Search,try something first
Don't make unnecessary threads.
We come here to share knowledge bro, not to spoonfeed
Sent from my ST25i using xda app-developers app
dotafan said:
Search,try something first
Don't make unnecessary threads.
We come here to share knowledge bro, not to spoonfeed
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
Why this language, he is asking in a thread called Help, so i dont think this is unnecessary thread.
Romans, did you try first to PM ROM maker mate?
mirost1 said:
Why this language, he is asking in a thread called Help, so i dont think this is unnecessary thread.
Romans, did you try first to PM ROM maker mate?
Click to expand...
Click to collapse
Sorry bro i can't understood this "PM ROM maker mate" not very good at eng thats first
and secand i want to ask the rom maker for them but i can't post in the rom thread because i don't have post 10 posts
and thanks bro i tried and searched but i didn't find them also i have month of exames so I don't have time sorry and thanks again:good:
mirost1 said:
Why this language, he is asking in a thread called Help, so i dont think this is unnecessary thread.
Romans, did you try first to PM ROM maker mate?
Click to expand...
Click to collapse
It is if you haven't tried anything. Having a help section doesn't mean the first thing you do is make a thread. You TRY first YOURSELF. Thats the point of XDA. To learn. And it includes learning to try and learning to use the search button. If he has I have no issues. Bt if he had, there would be something in the first post about it.
Sent from my ST25i using xda app-developers app
Just download munjeni's jb Rom from sola dev thread.. You'll find everything you need in the zip.. Just extract n push it via adb or manually move it through file explorer to /system/app/:thumbup:
hey guys...............
i need to know how to flash a custom kernel with img format because there's this rom that needs lupus kernel to work
this one
http://forum.xda-developers.com/showthread.php?t=2336571
plz help
Couldnt you read some more or use the search button before creating a new thread?
Anyway see general section for the guide.
And next time search before you make a new thread
Regards
N
Read my guide on how to install a custom rom/kernel. It is in the stickies in general forum
Sent from my Nexus 4 running Android 4.2.2
cordey said:
hey guys...............
i need to know how to flash a custom kernel with img format because there's this rom that needs lupus kernel to work
this one
http://forum.xda-developers.com/showthread.php?t=2336571
plz help
Click to expand...
Click to collapse
My Guide About It
.
.
Noob To EXtreme User Guide
Hi everyone ,
I am new to android ,as i have been an apple user :/ . Now i got a samsung galaxy s3 I9300 , i am rooted i installed cwm the latest one from 5 days ago.
Now if anyone of you guys would be so kind of writting a step by step toturial i would be really greatfull. Oh and also about gapps , which of them should i install .
http://forum.xda-developers.com/galaxy-s3/development/rom-liquidsmooth-v3-0-i9300-t2672770 here is the thread
ps: Now i am at stock 4.3 rooted . If you need any other info just ask , all i wana do is install this rom as i think is the best one atm for our sgs3 ( if you know any others that beats this ROM tell me ) .
egli.kasa1 said:
Hi everyone ,
I am new to android ,as i have been an apple user :/ . Now i got a samsung galaxy s3 I9300 , i am rooted i installed cwm the latest one from 5 days ago.
Now if anyone of you guys would be so kind of writting a step by step toturial i would be really greatfull. Oh and also about gapps , which of them should i install .
http://forum.xda-developers.com/galaxy-s3/development/rom-liquidsmooth-v3-0-i9300-t2672770 here is the thread
ps: Now i am at stock 4.3 rooted . If you need any other info just ask , all i wana do is install this rom as i think is the best one atm for our sgs3 ( if you know any others that beats this ROM tell me ) .
Click to expand...
Click to collapse
Please, read the stickies, please.
In short, install zip from sdcard in cwm and select the zip of the rom you downloaded in your case liquidsmooth.
Oh and, please, search before posting, not trying to be rude but this has been answered zillion times.
Cheers, and happy flashing. [emoji41]
---------- Post added at 11:41 PM ---------- Previous post was at 11:40 PM ----------
lsalamun said:
Please, read the stickies, please.
In short, install zip from sdcard in cwm and select the zip of the rom you downloaded in your case liquidsmooth.
Oh and, please, search before posting, not trying to be rude but this has been answered zillion times.
Cheers, and happy flashing. [emoji41]
Click to expand...
Click to collapse
And in case you want to go back, first, now, before doing anything, backup efs, use k-Tool from play store, and then put your backup on a safe location (cloud).
Sorry for being so dumb lol , just don't wana brick the phone that's all :3 .
And do you suggest me any other rom better than this one ?
egli.kasa1 said:
Sorry for being so dumb lol , just don't wana brick the phone that's all :3 .
And do you suggest me any other rom better than this one ?
Click to expand...
Click to collapse
No asking for best rom etc in this forum. Try them out yourself
Sent from my GT-I9300 using XDA Free mobile app