The display of my Amazfit Bit watch looks like it has pressed to hard (like you see on a LCD display).
I don't think it's normal behaviour. Latest software is updated.
What can I do ?
zigurrat said:
The display of my Amazfit Bit watch looks like it has pressed to hard (like you see on a LCD display).
I don't think it's normal behaviour. Latest software is updated.
What can I do ?
Click to expand...
Click to collapse
It seems an hardware problem; send it back to the seller
Inviato dal mio MI 5s utilizzando Tapatalk
Related
Hello
I received my xperia ultra yesterday from expansys.
I found that sometimes de screen dont respond properly, either or its too sensitive, exemple when scroll de contacts list sometimes open one contact, or when i move and icon in the launcher the icon drops, and i put the same pressure all the time.
Or sometimes its irresposive, in the keyboard if touch the same letter with the same pressure, sometimes register the press,others (1 of every 8 or 10) dont.
I dont know if its a defective unit or its a common issue.
Any help?
Thanks
What firmware version are you running?
LordManhattan said:
What firmware version are you running?
Click to expand...
Click to collapse
14.1.b.1.510
melchoramor said:
Hello
I received my xperia ultra yesterday from expansys.
I found that sometimes de screen dont respond properly, either or its too sensitive, exemple when scroll de contacts list sometimes open one contact, or when i move and icon in the launcher the icon drops, and i put the same pressure all the time.
Or sometimes its irresposive, in the keyboard if touch the same letter with the same pressure, sometimes register the press,others (1 of every 8 or 10) dont.
I dont know if its a defective unit or its a common issue.
Any help?
Thanks
Click to expand...
Click to collapse
There seems to be a lot of discussion about our units and their issues or lack of issues.
I have never had a SOD (screen of death) or any sensitivity issues. Not on any firmware..
- Updating firmware probably wont fix your issue.
My advice: I would RMA your unit. (Return merchandise authorization) get a replacement.
I had the same issue and got it replaced, the screen was faulty. A simple exchange and now i have speaker issues, hoping third times the charm.
nintendolinky said:
I had the same issue and got it replaced, the screen was faulty. A simple exchange and now i have speaker issues, hoping third times the charm.
Click to expand...
Click to collapse
crap! This has got to be the worst case of quality assurance from Sony. I'm one of the lucky ones to get an actual fully working unit...
One question for you all. Which model do you have? Do we know if there's one particular model that has the majority of problems, or is it mostly random? Hamdogg, you got the C6833 (LTE) and no problems right? OP, what do you have?
I have the c6833
In other words, anyone wuth this issue has solved without replace tbe unit?
For for me replace the unit its the last stand, i buy in expansys and i dont know his policy in this subjet.
Its random sometimes works fine for a while, and appears, i think its about 90% fine, but its a lot of money and if no solutions its imposible life with this problem always.
Curioaly when i received the order from expansys the box was already open, not sealed.
Maybe im not the first one that find that this unit its faulty.....
Really i dont know.
.
Enviado desde mi C6833 usando Tapatalk 2
And anothr think.
Almost always, the problem appear more when you just power on the unit, tje first seconds are the most dangerous.
If you use during a while its more dificult to reproduce.
Enviado desde mi C6833 usando Tapatalk 2
No power on i mean turn on.
Enviado desde mi C6833 usando Tapatalk 2
Hi there,
So recently I sold my SGS2 to my brother (in complete working order, I had been using it up until I gave it to him) when I got my n5. He seems to have been getting along fine with it for the last couple of weeks.
He came home today and showed me that the touchscreen is unresponsive (initially tried a battery pull) but no such luck. The other buttons work, and everything appears to be progressing normally with the boot (I can see the wifi connect, he has mobile signal etc.). After about 5 seconds of not interacting with the phone, it dims very slightly and the backlight starts flickering very quickly, but stops instantly if I tap it (although I still can't interact with the device in any other way through the touchscreen), please note this also happens in recovery (so I'm guessing it's hardware).
I've tried doing a factory and cache wipe in recovery but it hasn't helped (I didn't expect it to).
He claims not to have dropped it or got it wet and everything on it is stock (always has been).
Does anyone recognise this issue, or know what it might be/ how hard it would be to fix?
I only sold it to him for £50 as he is family, but I could do without having to give him his money back...
Thanks for any help,
Dan
Difficult to say from this side, if you have the chance to try to check if the connections between the motherboard and the screen are not loose nor unplugged, and do a factory reset, even though I assume it's the hardware here.
If (as I think) a factory reset doesn't solve the problem, I would go for a screen replacement, better if you can try one before buying. If it's not the screen, then go for a mobo replacement. Hope I helped
Inviato dal mio GT-I9100
danlocke123 said:
Hi there,
So recently I sold my SGS2 to my brother (in complete working order, I had been using it up until I gave it to him) when I got my n5. He seems to have been getting along fine with it for the last couple of weeks.
He came home today and showed me that the touchscreen is unresponsive (initially tried a battery pull) but no such luck. The other buttons work, and everything appears to be progressing normally with the boot (I can see the wifi connect, he has mobile signal etc.). After about 5 seconds of not interacting with the phone, it dims very slightly and the backlight starts flickering very quickly, but stops instantly if I tap it (although I still can't interact with the device in any other way through the touchscreen), please note this also happens in recovery (so I'm guessing it's hardware).
I've tried doing a factory and cache wipe in recovery but it hasn't helped (I didn't expect it to).
He claims not to have dropped it or got it wet and everything on it is stock (always has been).
Does anyone recognise this issue, or know what it might be/ how hard it would be to fix?
I only sold it to him for £50 as he is family, but I could do without having to give him his money back...
Thanks for any help,
Dan
Click to expand...
Click to collapse
Time for LCD n digitizer replacement. Jus try *#0*# n see if u could test the screen. Cheers
totalnoob34 said:
Difficult to say from this side, if you have the chance to try to check if the connections between the motherboard and the screen are not loose nor unplugged, and do a factory reset, even though I assume it's the hardware here.
If (as I think) a factory reset doesn't solve the problem, I would go for a screen replacement, better if you can try one before buying. If it's not the screen, then go for a mobo replacement. Hope I helped
Inviato dal mio GT-I9100
Click to expand...
Click to collapse
I'm just uploading a quick video to clarify what is happening. I'll crack it open later a have a look at the connector to see if thats the issue. Do you happen to know if the digitizer and LCD are separate components in the s2?
danlocke123 said:
I'm just uploading a quick video to clarify what is happening. I'll crack it open later a have a look at the connector to see if thats the issue. Do you happen to know if the digitizer and LCD are separate components in the s2?
Click to expand...
Click to collapse
I've replaced some, they are glued together, and not separable by the user without the right tools (and those are VERY expensive and need training).
Inviato dal mio GT-I9100
Video
http://youtu.be/CoCUxFLTxAg
totalnoob34 said:
I've replaced some, they are glued together, and not separable by the user without the right tools (and those are VERY expensive and need training).
Inviato dal mio GT-I9100
Click to expand...
Click to collapse
I was afraid that would be the case
EDIT: FIXED! maybe he did drop it and dislodged the connector?
danlocke123 said:
http://youtu.be/CoCUxFLTxAg
I was afraid that would be the case
EDIT: FIXED! maybe he did drop it and dislodged the connector?
Click to expand...
Click to collapse
Glad you did it. Sometimes a little DIY saves loads of hassle
Inviato dal mio GT-I9100
i have a x829
on 21s firmware
had this phone from Aliexpress for few days
i have this problem of touch not regestering on the screen
the left upper area.
this video will shows the problem :silly:
- https://youtube.com/watch?v=56c4xuaxU8Q
is this hardware problem? or anyone had experienced this before?
update:
i tried reinstalling ROM
this problem goes away at first, but comes again after a few minutes
Seems to be hardware mate
Enviado desde mi ASUS_Z00TD mediante Tapatalk
In a German forum someone reported same behavior; he was able to solve the issue by removing the display protection film:
As a new user I’m not able to post links, search for “android-hilfe.de/thema/linker-teil-des-displays-reagiert-nicht-auf-eingaben"
i have removed the protection film.
the problem doesnt happen on 1st fresh boot (install ROM)
after a few minutes of operation, then this problem occurs
this will go away after reboot but only 50% of the time before it starts again
Go to Aliexpress for full refund. You will need to send back the phone m
Sent from my Le X820 using Tapatalk
Hi. I also have the same problem in my device. Is there any fix for this now?
I am having this problem too after replacing new lcd from china. The problem was worsened when I put the tempered glass. It still persist slightly even when the tempered glass is removed. Any ideas?
Hello to all.
I have an nvidia shield lte tablet with broken touch screen.
Nvidia, from this point of view is very poor, has no service centers, and has no spare parts.
I find a bad tablet wifi version from which to disassemble the spare part, to try an experiment.
The experiment is successful, everything works perfectly, except the stylus pen that can not write.
Where did I go wrong?
Precisely I have not done the hard reset to lose the data, which I will do sooner, but if it is a calibration issue or some other setting maybe avoided resetting.
Inviato dal mio D6503 utilizzando Tapatalk
did you use a wifi original tablet or a k1 tablet?
Hi guys, my Huawei mate 20 pro randomly blinks the fingerprint sensor many times, i don't know if It Is normal or not! Please help me i'm going Crazy !
Johnmattew93 said:
Hi guys, my Huawei mate 20 pro randomly blinks the fingerprint sensor many times, i don't know if It Is normal or not! Please help me i'm going Crazy !
Click to expand...
Click to collapse
I suppose it is not randomly. When you are activating the proximity sensor at the top end of the front face of the phone by moving something near it or when you moving something near the fingerprint scanner, the characteristic fingerprint picture turns on to illustrate the area you have to press your finger onto in order to unlock the phone.
But this blink It's normal ? Your mate make the same thing ? My fingerprint Blink many times 5 6 !
Can someone help me, please guys
It's not normal.
Why? Other users says It's normal ! Your mate Blink or not ?
Johnmattew93 said:
Why? Other users says It's normal ! Your mate Blink or not ?
Click to expand...
Click to collapse
Does it blink when you are no where near it? Or just when u put ur hand or anything near the phone?
Sent from LYA LYA Ya Bums on Fire
If i tap the screen and attend It blinks One time but sometimes i tap and blinks 4 5 times ! And i don't know why ! You have a mate ? Your mate Blink ?
Mine doesn't blink that many times, unless I kept on putting something near the sensor. Yes I have this phone
Sent from LYA LYA Ya Bums on Fire
Johnmattew93 said:
Why? Other users says It's normal ! Your mate Blink or not ?
Click to expand...
Click to collapse
Because mine doesn't behave like that. It only blink when I touch the screen and only once. I use both fingerprint and faceunlock if that matters
if i hover over the proximity sensor or the notch, it'll blink. it can be quite sensitive, i put it near my work laptop's touchpad and type on laptop keyboard, it might also trigger it to blink
Have you a screen protector ? Liquid glass ?
Maybe your phone is like a nagging wife? It's constantly looking your attention. Pick me up and turn me on.
Johnmattew93 said:
Have you a screen protector ? Liquid glass ?
Click to expand...
Click to collapse
This isn't realy normal. I tested allot, I would say your device is damaged. They exchanged mine because of this. I would bring it back to Huawei store and ask them for repair.
Greetings Tyler
Gesendet von meinem LYA-L29 mit Tapatalk
Definitely not normal, you should send it in for repair.
TylerDurben said:
I would say your device is damaged. I would bring it back to Huawei store and ask them for repair.
Greetings Tyler
Gesendet von meinem LYA-L29 mit Tapatalk
Click to expand...
Click to collapse
The giggling pin needs replaced.