lg g5 deadboot - Android Q&A, Help & Troubleshooting

hi everyone happy new year
pleaaaaaase i need your help. i flashed my lg ls992 rom, but when the flash ends, normally the device rebooting but my device is going off and still of, i press power button but it's still of, trying to enter to recovery mode it's the same, connect the phone to charge but nothing change it stills off and don't charge, but when i connect it to pc , it's recognized the mobile driver but the charging signal don't appears.
i tried several thing like inplug the batterie and press 30 seconds on power button.. but nothing new, no flash program recognized my device
please help me 3 days of trying and trying but not result

medja77 said:
hi everyone happy new year recognized the mobile driver but the charging signal don't appears.
i tried several thing like inplug the batterie and press 30 seconds on power button.. but nothing new, no flash program recognized my device
please help me 3 days of trying and trying but not result
Click to expand...
Click to collapse
Uninstall all drivers use USB DEVIEW to uninstall hidden drivers and do this
https://www.youtube.com/watch?v=dMzEcyVwQiM

Related

[Q] My Xperia S bricked!

After using recovery and install a new kernel ( seems not compatible ) after choose reboot to system option my Xperia S didn't function anymore and I couldn't able to use keys to reset or power on my phone.
I try all of combination of keys but nothing
I put in charging more than 8 hour but nothing ( only first solid RED led appeared and after hours it goes off and when try to charge another time it did the same )
when I connect to PC the flashtool shows it connected with debugging off and do nothing.
I can't go on flash mode or fast mode to reinstall again.
would some one help me to how can I bring my phone in live. ( I haven't a repair sony service in my town )
Have you tried what I said?
skip0pot2mus said:
Have you tried what I said?
Click to expand...
Click to collapse
What did you said?
It's not bricked, one of my Xperia S phones did this to me on multiple occasions. The first time i just let it charge over night, or until the solid red LED turned to solid orange LED. The patience waiting for it to turn to an orange LED is the key here i noticed after it happening several times, interrupt it each time and it may as well be bricked through lack of patience.
Thread moved to Q & A section, kindly post in the relevant section next time.
3x vibe
Napolee said:
After using recovery and install a new kernel ( seems not compatible ) after choose reboot to system option my Xperia S didn't function anymore and I couldn't able to use keys to reset or power on my phone.
I try all of combination of keys but nothing
I put in charging more than 8 hour but nothing ( only first solid RED led appeared and after hours it goes off and when try to charge another time it did the same )
when I connect to PC the flashtool shows it connected with debugging off and do nothing.
I can't go on flash mode or fast mode to reinstall again.
would some one help me to how can I bring my phone in live. ( I haven't a repair sony service in my town )
Click to expand...
Click to collapse
had the same last night, hold the vol+ and vol - key pressed together, then press the power for about 20 secs you get a 3x vibe, then connect and flash
corum3 said:
had the same last night, hold the vol+ and vol - key pressed together, then press the power for about 20 secs you get a 3x vibe, then connect and flash
Click to expand...
Click to collapse
As I wrote I try all combination of keys but nothing changed...
Just when I plug to PC red LED goes on but after about an hour it goes off , and when I replug it goes on again...
Last days when I plug to wall charger red LED acts the same pluged to PC but now red LED is off about 8 hours connected to charger....
Only the flashtool recocnised the phone with usb debugging off when I connect to PC but I can't go to flash mode or fast boot mode...
Is there any commands with an application that works with xperia s and re write its bootloader when its not in flash or fastboot modes.
I was installed all of the derivers needed for adb and ... when my Xperia S was working...
would know someone help me to take my phone works agian?
Ohh man that's some pain in the ass!I don't know man you should try it again but explain me again you can only see red led light and nothing else???I had almost the same problen but luckily for me my usb debugging was checked.I don't know man google it just to got the usb debugging.If you could do that than this is the post for you....however if you don't... http://forum.xda-developers.com/showthread.php?p=31884091
Sent from my LT26i using xda premium

[Q] Phone soft-bricked, battery dead

After an unsuccessful CWM flashing attempt, my phone it getting the infamous "SECURITY ERROR" message. Now, I tried the offline KDZ method, but like many other JB users, the flashing got stuck at 15%. So, finally I decided to use the online flashing method using the new LG Support Tool. But the sad part is that I am suffering from a low battery issue.
So, does anyone know how to charge a soft bricked Optimus L9?
Any help would be highly appreciated.
I'm just guessing but you could try removing battery for 15-20 sec then inserting it and connecting your phone to charger. If that doesn't work, try installing x and u using fastboot that try same process with removing battery...
You can always use another phone to charge your battery
aod990 said:
If that doesn't work, try installing x and u using fastboot that try same process with removing battery...
Click to expand...
Click to collapse
I tried the fastboot method too, but I face a problem while doing it. The OAMP device which shows in the devices manager keeps disconnecting and reconnecting. So then I unplugged the USB and clicked on "show hidden devices" and then installed the drivers by clicking on the OAMP shown there. But when I plug in the USB again, the same reconnecting starts happening. Do you know a solution to this?
You should follow this post...
Connecting and disconnecting of OMAP device is normal, but it is important that it's recognized in device manager...
FINALLY UNBRICKED....
Sincere thanks to all those wonderful people who have made so many tutorials. I failed to do the offline KDZ flash as well as the fastboot method (as I have mentioned above). But anyway, I did unbrick my phone. I flashed using the online method as follows:
Download the latest LG Mobile Support Tool.
Connect your phone in "Software Upgrade" mode (by holding the Vol UP button while connecting the USB).
In the LG Tool, click on "Options > Recovery". Getting the recovery to open is a confusing task. You have to fiddle around with the USB Drivers options a bit.
Now, let the LG Tool do it's magic [In my case, it downloaded a 592MB file]
CAUTION: When the upgrade tool is in it's last stage, the phone will restart at around 93%. When it restarts, you quickly need to press and hold the Vol UP button to again enter the "Software Upgrade" mode, otherwise the upgrade will not succeed and you will get an error. If you get that error message, don't worry, the Tool will tell you how to "RETRY" (don't worry, no file will be downloaded from the internet this time )
REGARDING THE BATTERY ISSUE:
When my phone got bricked it was at around 65%. Now, when I finally unbricked it, I am seeing 83%!! So, either the phone charged when it was connected in the "Software Upgrade" mode, or it charged when I plugged the charger in the wall socket for half an hour. In any case, if your battery is dead (and phone is bricked) try to charge using a wall socket first. When you do this, the phone will automatically switch on and you will again get that sad "SECURITY ERROR" message. Just switch off the phone when you get this. Let the phone be plugged in for some time to let it charge. [NOW I AM NOT SAYING THAT IT WILL CHARGE AS I HAVE MENTIONED THE TWO POSSIBLE WAYS ABOVE, but hey, it's worth a try!] If your phone switches on, good job! Otherwise, try to charge via the USB by connecting to your PC/Laptop by going into "Software Upgrade" mode.
I just hope that the above points will help some unlucky soul who was stuck like me Remember, never give up!
Thanks to all for the tips my optimus was running fine at about 65 percent charged and just shut off. I bought a new battery charged all night in the wall still nothing. I can't get my computer to see it. when i hold power and vol down I can hear the computer make sounds like it recognizes it though
david244us said:
Thanks to all for the tips my optimus was running fine at about 65 percent charged and just shut off. I bought a new battery charged all night in the wall still nothing. I can't get my computer to see it. when i hold power and vol down I can hear the computer make sounds like it recognizes it though
Click to expand...
Click to collapse
Can you enter s/w upgrade mode? ( Press and hold VolumeUP button and insert USB cable into phone )
aod990 said:
Can you enter s/w upgrade mode? ( Press and hold VolumeUP button and insert USB cable into phone )
Click to expand...
Click to collapse
I don't think so, just now did it and I can here the computer making sounds like it recognizes it but nothing shows on the phone
p.s. guessing my board went bad, no worries though just first time I ran into something I couldn't fix if the cpu would read it or any software I might have a chance
If you still have warranty you should take your phone to service, if not then try installing fastboot drives and flashing x and u then try offline kdz flash...
aod990 said:
If you still have warranty you should take your phone to service, if not then try installing fastboot drives and flashing x and u then try offline kdz flash...
Click to expand...
Click to collapse
well I did the fastboot option i found but not sure if I did it right, I downloaded the omna files but not sure if the right ones but I did get the screen to show a faded out lg symbol not sure if that means anything
Use fastboot from here. You have here how to install fastboot drives. Then follow instructions from this page.
Read instructions carefully and you should be able to successfully unbrick your phone.

[Q] Leagoo Elite 2 Boot Loop-tried everything!!

Went to do a wireless update on phone and it crapped out. It's my first android and i've tried everything:
Android drivers download, All MTK Usb Drivers
Sp-Flash, won't work because the phone keeps rebooting and i can't update driver
Put Leagoo firmware version 5 then 8 on sd card and it wouldn't let it install
Flashboot wont work adb will connect through sideload but no help
PdaNetA4150 won't work
I don't think i put it in debugging mode, i remember looking at it and thinking i should check it out some time!
First off all:
Make sure you can get your device turned off: using the Power + Volume up + Volume Down combination
or hold Power for 10 SECS! (count slowly)
or removing the battery (only when it's not integrated!)
Then hold the volume down or volume up while connecting your phone with a USB cable connected to the computer ( this should get you into a sort of flashing mode...)
Reply when this worked plz.
Greetings
MrMaddTraxx
MrMaddTraxx said:
First off all:
Make sure you can get your device turned off: using the Power + Volume up + Volume Down combination
or hold Power for 10 SECS! (count slowly)
or removing the battery (only when it's not integrated!)
Then hold the volume down or volume up while connecting your phone with a USB cable connected to the computer ( this should get you into a sort of flashing mode...)
Reply when this worked plz.
Greetings
MrMaddTraxx
Click to expand...
Click to collapse
Got the phone sorted.....used SP Flash tool, trick was to insert battery as soon as i heard the computer recognise the usb connection, then SP went to work.
Allright , great job!
hi..me also having this kind of problem..after tried to upgrade from wifi..now my phone is dead..how to connect my phone to pc for flash..please describe in detail step...tq...my phone is Leagoo Elite 2...

Bricked Z2 after flashing a recovery

Hello,
I've bricked my phone after a TRWP recovery. I've tried the solution provided on the forum (wait until the battery dies, unplug the battery....). Nothing worked.
I've tried to connect my phone to the PC and it cannot be detected. I have flashing red light when first connected and after few seconds a constant red light that stay for 30 seconds and flashing red light again.
I've tried to use adb devices command and nothing shows up. On linux, I've did "lsusb" command and the phone didn't show up.
Is that my device definitively broken or there is still option that I didn't explore?
Thanks for your support
Once time this happened to me but with my Z1, after desperately search for a solution and read many tutorials, the only solution was reinstall all drivers and connect device to be repaired with Sony Pc Companion, but is necessary have some of battery, if you drained completely, then charge it at least 50%
This works for me, and maybe works now, as long you device led indicator works and Pc sounds when plug in USB, then there's hope.
As @BalamXDroidhe said, charge your phone, put it off and try the program Pc Companion or Xperia Companion, but DO NOT WAIT for the computer to recognize the phone, why still remains the operating system is not loaded.
Just go to repair the software and i believe that everything will be fine.
yofranch said:
Hello,.............
Thanks for your support
Click to expand...
Click to collapse
Thanks for the reply. I did try Sony companion. Unfortunatly this is not the software that is not recognizing the device, the computer itself don't shows any Z2 on USB port. Furthermore, I went to a repair shop and said that the battery is not charging at all. A mother board problem to his point of view.
I'm afraid that is not much to be done at this stage
If you have any suggestion....
Thanks
first of all you need to charge the battery or swap it with another one if the phone isn't charging it at all. then try to boot the phone in flash mode with flashtools in order to try to flash a new .ftf (use the guide below for flashtools).
http://www.gizmobolt.com/2015/04/09...z3-23-1-a-0-690-ftf-using-flashtool-manually/
This is the first step to do in a such situation.
yofranch said:
I've bricked my phone after a TRWP recovery. I've tried the solution provided on the forum (wait until the battery dies, unplug the battery....). Nothing worked.
Click to expand...
Click to collapse
Never wait until the battery dies, that is not wise at all.
How did you unplug the battery? You completely disassembled the device? That is not wise at all.
You should have simply pressed Vol up plus power for 3 seconds, that would have forced a power disconnect. It is that easy.
The 2 things you did are somewhere close to the worst things to do when your device has a problem.
You could try a charged battery from another device as said but you will likely physically damage the device when you open it. or simply leave on wall charger for a few hours and see if it can charge.
Ensure your USB cable is a "data" USB cable, not a cheapo charge only cable.
Even try another windows computer.
May I ask how did you brick your device? What did you do in recovery?
Sent from my D6503 using XDA-Developers mobile app
Hello,
I've had a problem while updating a custom ROM and I had to restart the rooting process from scratch. All went well (Kit kat install, rooting, TRWP install) until I've used a previous TRWP backup. Since then, only red light
Is there an hardware problem occured at the same time that I flashed the device... Very unlikly. My feeling is that the kernel is corrupted and don't allow the device to start the early stage boot and so no more charging and no connection possible. It's just a feeling.
Thanks for your support
yofranch said:
Hello,
I've bricked my phone after a TRWP recovery. I've tried the solution provided on the forum (wait until the battery dies, unplug the battery....). Nothing worked.
I've tried to connect my phone to the PC and it cannot be detected. I have flashing red light when first connected and after few seconds a constant red light that stay for 30 seconds and flashing red light again.
I've tried to use adb devices command and nothing shows up. On linux, I've did "lsusb" command and the phone didn't show up.
Is that my device definitively broken or there is still option that I didn't explore?
Thanks for your support
Click to expand...
Click to collapse
What do you mean by "after a TWRP recovery"?
Your bootloader is locked or unlocked?
Use a wall charger to charge your phone.
Hello,
"Never wait until the battery dies, that is not wise at all." => I did not at a first, I've tried to flash with flash tool the stock rom with roughly 80% battery. The phone was already not detected by computer ( I tried Linux, Windows 8 and Windows 7 computer).
"How did you unplug the battery? You completely disassembled the device? That is not wise at all.
You should have simply pressed Vol up plus power for 3 seconds, that would have forced a power disconnect. It is that easy. "
=> I couldn't agree more that is not wise to disassemble the device, I've done it after I tried the Vol up+ power technique.
"The 2 things you did are somewhere close to the worst things to do when your device has a problem." => The next time...
"You could try a charged battery from another device as said but you will likely physically damage the device when you open it. or simply leave on wall charger for a few hours and see if it can charge." => No charge at all over night with genuine Sony charger and cable. I brought it to a repair shop and with a magnetic charger, not better.
Thanks for your reply.
"What do you mean by "after a TWRP recovery"?" => I've made a backup before flashing my custom rom, just in case. As I said, the rooting process went well until I launch the backup recovery.
"Your bootloader is locked or unlocked?" I'm afraid that is the step I've missed after flashing KitKat and rooting. Is that possible that locked bootloader can lead to that mess?
"Use a wall charger to charge your phone" => No charge, just blinking red light even with battery level at least 50%.
Thanks for your reply.
Same thing happened to me. My phone got bricked.
Its not androxide flashtool or sony companion
Use this.
Its official sony xperia flashtool.
Its called 'Emma'
http://developer.sonymobile.com/open-devices/flash-tool/
All process shared in link..
Good luck
Hello,
I also tried Emma without any success.
Thanks again
The exact same thing happened to me when i flashed a kernel, what i did, was just open xperia companion, click on repair software, and follow the instructions, connecting in flash mode and that stuff, and boila, brand new. i almost cried when that happened to me tho:crying:
it seems that you are using locked bootloader phone, and flashed custom kernel or twrp image, can you connect in fastbooot mood of in flash mood? (by pressing vol+ and connecting usb or vol- and connecting usb respectively),

lg g5 deadboot

hi everyone happy new year
pleaaaaaase i need your help. i flashed my lg ls992 rom, but when the flash ends, normally the device rebooting but my device is going off and still of, i press power button but it's still of, trying to enter to recovery mode it's the same, connect the phone to charge but nothing change it stills off and don't charge, but when i connect it to pc , it's recognized the mobile driver but the charging signal don't appears.
i tried several thing like inplug the batterie and press 30 seconds on power button.. but nothing new, no flash program recognized my device
please help me 3 days of trying and trying but not result
medja77 said:
hi everyone happy new year. pleaaaaaase i need your help. i flashed my lg ls992 rom, but when the flash ends, normally the device rebooting but my device is going off and still of, i press power button but it's still of, trying to enter to recovery mode it's the same, connect the phone to charge but nothing change it stills off and don't charge, but when i connect it to pc , it's recognized the mobile driver but the charging signal don't appears...
Click to expand...
Click to collapse
I don't have this device but, the following area of the forum is specific to your device.
https://forum.xda-developers.com/lg-g5
With that stated...
Your best bet is probably to take a look at the following thread and, if needed, post your question within that thread.
https://forum.xda-developers.com/showthread.php?t=3350648
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
medja77 said:
hi everyone happy new year
pleaaaaaase i need your help. i flashed my lg ls992 rom, but when the flash ends, normally the device rebooting but my device is going off and still of, i press power button but it's still of, trying to enter to recovery mode it's the same, connect the phone to charge but nothing change it stills off and don't charge, but when i connect it to pc , it's recognized the mobile driver but the charging signal don't appears.
i tried several thing like inplug the batterie and press 30 seconds on power button.. but nothing new, no flash program recognized my device
please help me 3 days of trying and trying but not result
Click to expand...
Click to collapse
Sorry to hear this...
Have you the Fastboot access? How to Check:
1) Remove Battery and put it back
2) Press and hold Volume - (Volume down) and connect via USB to your PC
3) The Phone Screen should change now and you can read something about Fastboot Mode
OR
Can you set your Phone into Firmware Download Mode?
1) Remove Battery and put it back.
2) Press and hold Volume + (Volume up) and connect via USB to your PC
3) The Phone goes normaly into Download-Mode now, see it on Phone Screen
4) Open LG Bridge and go to Update and then in the Bottom right Hand side onto >Correct Update Errors< this will flash your Phone with the Stock Rom
Working for you?

Categories

Resources