Related
GT-I9300 samsung s3
ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXALEF_611327_REV00_user_low_ship.tar.md 5 is valid.
<OSM> MODEM_I9300XXLEF_REV02_REV04_CL1147871.tar.md5 is valid.
<OSM> CSC_OXE_I9300OXEALE4_CL606160_REV00_user_low_ship. tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
please help me to fix this problem when i try to flash anything in PDA button it always come up with that error.
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
when i try to flash a PIT file it comes up with that error.
i tried to flash a pit file and a stock rom at the same time but still no luck.
i almost tried everything but still no luck to ressurect my gt-i9300
my phone is not rooted, im only browsing in play store then suddenly the phone freeze and when i try to soft reset. after it boots up in the home screen after 5 - 10 sec it freezes and reboot. even in safe mode its still the same, i also try to wipe and reset to factory setting in the recovery mode but nothing happens. it only reboots.
please help me guys.. thanks in advance
Option 1: Reboot your computer and retry
Option 2: Use another USB port and try
Option 3: Use another/original USB cable and try
Well after these 3 options are exhausted..only option left is SC as it means your NAND is corrupted..
zoot1 said:
Option 1: Reboot your computer and retry
Option 2: Use another USB port and try
Option 3: Use another/original USB cable and try
Well after these 3 options are exhausted..only option left is SC as it means your NAND is corrupted..
Click to expand...
Click to collapse
thanks for your reply but i already done that so many times, but still no luck
i think my NAND is corrupted is there anyway to fix this instead of changing m.board?
doimendoza said:
thanks for your reply but i already done that so many times, but still no luck
i think my NAND is corrupted is there anyway to fix this instead of changing m.board?
Click to expand...
Click to collapse
Nope .
jje
Tell me few things (take screenshot if you can).
1. Phone firmware version (*#1234#)
2. IMEI (*#06#) - only first dwo digits
3. Desktop/laptop system version (32 or 64 bit)
4. Computer USB version (USB1.1, 2 or 3)
5. Original USB cable?
6. Is USB debbugging in phone enabled? (Settings - programmer options)
7. Is encryption of the phone enabled? (Settings - Security - Encryption)
8. Originaly branded or stock firmware?
9. Have you latest Kies or separate Samsung for Mobile Devices drivers installed?
10. The exact circumstances of the problem. Software installation, system programming failures, etc.
SirKunon said:
Tell me few things (take screenshot if you can).
1. Phone firmware version (*#1234#)
2. IMEI (*#06#) - only first dwo digits
3. Desktop/laptop system version (32 or 64 bit)
4. Computer USB version (USB1.1, 2 or 3)
5. Original USB cable?
6. Is USB debbugging in phone enabled? (Settings - programmer options)
7. Is encryption of the phone enabled? (Settings - Security - Encryption)
8. Originaly branded or stock firmware?
9. Have you latest Kies or separate Samsung for Mobile Devices drivers installed?
10. The exact circumstances of the problem. Software installation, system programming failures, etc.
Click to expand...
Click to collapse
1 i9300ubblg2
2 35
3 Neo Laptop 64bit/ and a windows desktop pc 32bit
4 2
5 Original usb cable
6 i cannot enable debugging mode because the phone always freezes and reboot
7. i cant see if its enabled i cant get to settings menu because it always freezes
8. my firmware is originaly branded
9 yes i installed a latest samsung drivers
10 the phone keeps freezing then reboots, if i try hard reset it does nothing, its not rooted, im just browsing in playstore the suddenly it freezes then i tried to do a soft reset it freezes then reboot
i tried to bring the phone to the samsung service center here in philippines but they said they dont have a firmware that match my phone, they can only restore a samsung s3 that came from asia, i think mine is made in spain or mexico, i do not really know but the user manual that comes from the box is in spain language, and the samsung technician said that the only solution is change the main board but they are afraid that it might not work properly if they install a board that came from asian version of s3, and they said that as of now they dont have a board to replace my board, (sorry for my bad english)
thanks a lot guys
http://forum.xda-developers.com/showthread.php?t=1840030
im trying this solutioin, but when i flash VRALEC bootchain it hangs in NAND write start
doimendoza said:
http://forum.xda-developers.com/showthread.php?t=1840030
im trying this solutioin, but when i flash VRALEC bootchain it hangs in NAND write start
Click to expand...
Click to collapse
That thread is for Verizon SGSIII..have you checked with OP that if it works with GT-I9300?
are you able to go into recovery stock/CWM..if yes..connect to adb... go to shell and type mount..
see the permissions for /dev/block/mmcblk0p09 whether it is ro or rw..if yes then you will have to follow that thread but contact the op first as the two bootchain files are not for GT-I9300
zoot1 said:
That thread is for Verizon SGSIII..have you checked with OP that if it works with GT-I9300?
are you able to go into recovery stock/CWM..if yes..connect to adb... go to shell and type mount..
see the permissions for /dev/block/mmcblk0p09 whether it is ro or rw..if yes then you will have to follow that thread but contact the op first as the two bootchain files are not for GT-I9300
Click to expand...
Click to collapse
it might not work for mine. but i will try to contact the op, thanks.. any other solution? im losing hope..
Your firmware is from Mexican Movistar carrier
CSC: TMM
Here you go this firmware:
http://samsung-updates.com/fw/Samsung-Updates.com-GT-I9300_TMM_1_20120726204707_ojr2td86dg.zip
You can try flash it wihout PIT.
All You need:
Newest KIES:
http://downloadcenter.samsung.com/content/SW/201208/20120809103126135/Kies_2.3.2.12074_13_13.exe
Newest Odin 3.07:
http://samsung-updates.com/Odin307.zip
Older Odin versions (with mx.pit):
1.85 - http://205.196.121.23/tkkj5ydcy29g/04nfr40vm3v16vd/Odin3-v1.85.rar
1.3 - http://205.196.123.108/xaphya2xprog/3qvcsyll3pciib1/odin_1.3.rar
USB Drivers:
1.5.5 - http://download2us.softpedia.com/dl...SUNG_USB_Driver_for_Mobile_Phones_1.5.5.0.exe
1.5.4 - https://androidfirmwares.net/Tools/Download/9
Firmwares:
http://samsung-updates.com/device/?id=GT-I9300
https://androidfirmwares.net/PhoneFirmware3
registration needed - http://www.sammobile.com/
SGS3 Toolkit
http://199.91.153.59/a2w0r7c8a6kg/u9y9qd8lb0mt3k8/SGS3+ToolKit+v2.0.exe
Flashing Guide by Intratech:
https://androidfirmwares.net/Guide/Details/9
ENCRYPTION VERIFICATION:
dial *#32489# on phone
PREPARING
1. Remove all stuff from laptop (its better to flash from laptop becouse of battery in case of AC power failure). Remove Kies, drivers, etc.
2. Reboot comp.
3. Use some sort of software to remove junks from system registry (for example this one: http://download.piriform.com/ccsetup321.exe)
4. Download all needed stuff from above.
KIES METOD
1. Install Kies first
2. Reboot phone
3. Try to connect phone and wait for Kies to launch or turn it on manualy
4. In Kies go to Menu - Initialize phone
5. Put your phones serial number (you need to find it in phone settings [settings - about phone - status] or under battery - 11 chars), and model name (GT-i9300)
6. Kies will try to reinitialize your phone
WIPE METHODES
1. via stock 3e recovery (factory data reset)
2. via phone settings (Settings - Backup and resetting - Factory defaults)
3. via CSC changing (propably you have only TMM csc installed) - dial *#272*IMEI#
4. service code hard reset (dial *2767*3855#)
5. another service code reset menu (*#*#7780#*#*)
ODIN METOD (Without repartition)
1. Install those drivers (confirm overwriting if it ask): http://205.196.123.145/th3bm2j9kuwg/3dh4d6up72me9re/usb_drivers_GalaxyS_x64.zip
2. Remove sim and extrnal SD-card
3. disconnect from internet (laptop)
4. kill all firewalls, antivirus, kies and another crap from app manager (laptop)
5. run Odin
6. select firmware you like
7. put phone in download mode
8. connect phone do laptop
9. if Odin display connected (and serial port number) than you good to go
10. start flashing
that it for now...
SirKunon said:
Your firmware is from Mexican Movistar carrier
CSC: TMM
Here you go this firmware:
http://samsung-updates.com/fw/Samsung-Updates.com-GT-I9300_TMM_1_20120726204707_ojr2td86dg.zip
You can try flash it wihout PIT.
All You need:
Newest KIES:
http://downloadcenter.samsung.com/content/SW/201208/20120809103126135/Kies_2.3.2.12074_13_13.exe
Newest Odin 3.07:
http://samsung-updates.com/Odin307.zip
Older Odin versions (with mx.pit):
1.85 - http://205.196.121.23/tkkj5ydcy29g/04nfr40vm3v16vd/Odin3-v1.85.rar
1.3 - http://205.196.123.108/xaphya2xprog/3qvcsyll3pciib1/odin_1.3.rar
USB Drivers:
1.5.5 - http://download2us.softpedia.com/dl...SUNG_USB_Driver_for_Mobile_Phones_1.5.5.0.exe
1.5.4 - https://androidfirmwares.net/Tools/Download/9
Firmwares:
http://samsung-updates.com/device/?id=GT-I9300
https://androidfirmwares.net/PhoneFirmware3
registration needed - http://www.sammobile.com/
SGS3 Toolkit
http://199.91.153.59/a2w0r7c8a6kg/u9y9qd8lb0mt3k8/SGS3+ToolKit+v2.0.exe
Flashing Guide by Intratech:
https://androidfirmwares.net/Guide/Details/9
ENCRYPTION VERIFICATION:
dial *#32489# on phone
PREPARING
1. Remove all stuff from laptop (its better to flash from laptop becouse of battery in case of AC power failure). Remove Kies, drivers, etc.
2. Reboot comp.
3. Use some sort of software to remove junks from system registry (for example this one: http://download.piriform.com/ccsetup321.exe)
4. Download all needed stuff from above.
KIES METOD
1. Install Kies first
2. Reboot phone
3. Try to connect phone and wait for Kies to launch or turn it on manualy
4. In Kies go to Menu - Initialize phone
5. Put your phones serial number (you need to find it in phone settings [settings - about phone - status] or under battery - 11 chars), and model name (GT-i9300)
6. Kies will try to reinitialize your phone
WIPE METHODES
1. via stock 3e recovery (factory data reset)
2. via phone settings (Settings - Backup and resetting - Factory defaults)
3. via CSC changing (propably you have only TMM csc installed) - dial
4. service code hard reset (dial *2767*3855#)
5. another service code reset menu (*#*#7780#*#*)
ODIN METOD (Without repartition)
1. Install those drivers (confirm overwriting if it ask): http://205.196.123.145/th3bm2j9kuwg/3dh4d6up72me9re/usb_drivers_GalaxyS_x64.zip
2. Remove sim and extrnal SD-card
3. disconnect from internet (laptop)
4. kill all firewalls, antivirus, kies and another crap from app manager (laptop)
5. run Odin
6. select firmware you like
7. put phone in download mode
8. connect phone do laptop
9. if Odin display connected (and serial port number) than you good to go
10. start flashing
that it for now...
Click to expand...
Click to collapse
thanks for the effort! i will try it as soon as i finish downloading the files.. thank you very much!! godbless you!
SirKunon said:
Your firmware is from Mexican Movistar carrier
CSC: TMM
Here you go this firmware:
http://samsung-updates.com/fw/Samsung-Updates.com-GT-I9300_TMM_1_20120726204707_ojr2td86dg.zip
You can try flash it wihout PIT.
do you have other link for that firmware? thanks
Click to expand...
Click to collapse
http://www.hotfile.com/dl/168240093/03245f2/I9300UBBLG2_I9300TFGBLG2_TMM.zip.html
Remember to unzip.
SirKunon said:
http://www.hotfile.com/dl/168240093/03245f2/I9300UBBLG2_I9300TFGBLG2_TMM.zip.html
Remember to unzip.
Click to expand...
Click to collapse
thanks again!
how and whats the use of sgs3 toolkit?
kies method
phone cannot connect to kies because it freezes
wipe method
cannot dial the codes because it keeps on freezing and rebooting
i will try ODIN method as soon as i finished downloading the firmware
thank you very much!
doimendoza said:
thanks again!
how and whats the use of sgs3 toolkit?
Click to expand...
Click to collapse
Toolkit for using adb to perform few main operations (push, pull, dump, flash, root, etc). It is usefull if you don't know how to use terminal adb semantic.
Read about it here:
forum.xda-developers.com/showthread.php?t=1703488
PS. Befor flashing, launch Odin with Administrator rights (right mouse clic on shortcut or program file - Run as Administrator).
Also remember to store all files in C: drive with short path:
C:\Flash\Odin\...
C:\Flash\Firmware\firmware_version\...
Do not use paths with spaces or unusual chars.
Wysyłane z mojego GT-I9100 za pomocą Tapatalk 2
SirKunon said:
Toolkit for using adb to perform few main operations (push, pull, dump, flash, root, etc). It is usefull if you don't know how to use terminal adb semantic.
Read about it here:
forum.xda-developers.com/showthread.php?t=1703488
PS. Befor flashing, launch Odin with Administrator rights (right mouse clic on shortcut or program file - Run as Administrator).
Also remember to store all files in C: drive with short path:
C:\Flash\Odin\...
C:\Flash\Firmware\firmware_version\...
Do not use paths with spaces or unusual chars.
Wysyłane z mojego GT-I9100 za pomocą Tapatalk 2
Click to expand...
Click to collapse
i follow carefully every single step and options that you give, but still doesent work :crying: im losing hope to ressurect this phone :crying: but thank you for your help..
any other suggestions?
Im affraid that you can not do anything more without USB debugging enabled and with no possibility to use service codes.
You cant use adb functionallity in this case which will be your last hope.
Have you tried all Odin versions, even 1.3? You can try to use another data cable, it is standarized and should work one from other phone or even camera - miniUSB to USB.
Maybe you wil find gsm center with riftbox or something simmilar to flash your device.
I'm out of ideas what else can help you.
Wysyłane z mojego GT-I9100 za pomocą Tapatalk 2
still cant flash!
I have tried the process through kies, the same thing happens as when i try to flash via odin, the process bar goes straight to full and freezes there.
In odin it says NAND write start though. nothing appears to be working
gman
doimendoza said:
thanks for your reply but i already done that so many times, but still no luck
i think my NAND is corrupted is there anyway to fix this instead of changing m.board?
Click to expand...
Click to collapse
What does SC mean?
So I got the phone rooted with superoneclick and I was wanting to make a recovery back up I found the cwm-recovery-ALL.tar at http://forum.xda-developers.com/showthread.php?t=942021 and odin3-v1.85'ed it with only auto reboot and F.reset check. I add cwm-recovery-ALL.tar to PDA.
The drivers where installed and the odin message gave me a Added!! so I click on start and it didn't do anything, so I pulled the cable out and rebooted. Now I have a error on the phone "Firmware upgrade encountered an issue, please selecdt recovery mode in Kies & try again.
I have a phone .. yellow ! .. computer
or
[_]../!\..[__]
What do I do now. Surely my phone is not that easily soft-bricked?
I should have this download mode on my phone http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc7/387149_10151162123669441_1216949137_n.jpg
But instead it is this...
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash3/554858_10151162113709441_1081303688_n.jpg
I am considering following this thread here and going to stock...
http://forum.xda-developers.com/showpost.php?p=18823545&postcount=43
ere is the process that this guide will take you through:
1) Flashing your T959P back to 2.2.1 Stock (This gives a nice fresh starting point)
2) Bring the phone up to Stock 2.3.4, and do a factory data reset.
3) Install the SGH-T959P-Stock_plus_Voodoo_CWM_2.3.4.tar to root the stock 2.3.4, and install Voodoo lagfix / ClockworkMod recovery.
But I am thinking all I have done at the worse is put the wrong CWM on my phone so i am working on fixing that.
1. do I ahve the right CWM recovery tar? got it from here http://forum.xda-developers.com/showthread.php?t=942021
2. is there something wrong with my computer that is stopping the flash -- so I have tried 1.85 and 3.07, tried different ports on the same computer, pulled the battery on the phone, tried a different cable, and of course stop and start odin, now I am moving to a different computer.
Here is the log from odin 1.85, it goes like this 5 seconds after I click start and it doesn't reboot.
<ID:0/027> Added!!
<ID:0/027> Odin v.3 engine (ID:27)..
<ID:0/027> File analysis..
<ID:0/027> SetupConnection..
<ID:0/027> Initialzation..
<ID:0/027> Get PIT for mapping.
<ID:0/027> Firmware update start..
<ID:0/027> recovery.bin
<ID:0/027> NAND Write Start!!
<ID:0/027>
<ID:0/027> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
with odin 3.07 here is the log and it hangs there past 5 minutes
<ID:0/028> Added!!
<ID:0/028> Odin v.3 engine (ID:28)..
<ID:0/028> File analysis..
<ID:0/028> SetupConnection..
<ID:0/028> Initialzation..
<ID:0/028> Get PIT for mapping..
<ID:0/028> Firmware update start..
<ID:0/028> recovery.bin
<ID:0/028> NAND Write Start!!
If you have any suggest please post, and I am also hanging over at Freenode channel #Cyanogenmod my handle is d0h, bobmutch, or am1sh
It is Friday in Canada time zone ET 8:30AM and I am back working on this again. HELP HELP HELP
This is what I ended up doing...
Setup Telus Samsung Fascinate 4G T959P -- Root, CWM Recovery, 2.3.4 with
1. download and install xvi32 on your computer http://www.chmaas.handshake.de/delphi/freeware/xvi32/xvi32.htm
2. download and install 7zip on your computer for unrar'ing rar files http://www.7-zip.org/download.html
3. download and install odin v1.85 on your computer http://ul.to/xt4607xx
4. download and install via odin Android 2.2.1 followings instructions in the included text file unrar with 7zip http://www.mediafire.com/?xc8xp9knn4n59tt
5. download and install via odin Android 2.3.4 following instructions in the included text file unrar with 7zip http://www.mediafire.com/?2d2v8nexvn88vw1
6. download and install via odin Root and Voodo CWM recovery SGH-T959P-Stock_plus_Voodoo_CWM_2.3.4v3.tar flash in odin PDA with only Auto Reboot and F. Reset Time checked.
7. get back 4G icon input on phone open up dialer app and type *#*#197328640#*#* tap "[6] COMMON", "[6] NV REBUILD", "[1] NV Rebuild", After Reset and then tap back to home, next time you reboot your phone the icon should be back.
8a. fix GPS accuacy by input on phone open up dialer app and type *#*#3214789650#*#* to take you to the AngryGPS menu, select Settings, General Settings, and change OPERATION MODE to STANDALONE.
8b. fix GPS accuacy by input on phone open up dialer app and type *#*#3214789650#*#* to take you to the AngryGPS menu, select Settings, SUPL Settings, and change Sever FQDN Type to Auto Config.
9. unlock by using the following
a) Commands on your computer to get the nv_data.bin which contains the unlock code:
ADB DEVICES -- this should your phone connected as a device with a number
ABD SHELL
su
cat /efs/root/afs/settings/nv_data.bin >> /sdcard/nv_data.bin
exit
b) locate unlock code in nv_data.bin
move the nv_data.bin from /mnt/sdcard/nv_data.bin on your phone to your computer and edit it with xvi32
search for "FF 00 00 00 00 00 30" as a Hex Value in the nv_data.bin file via xvi32
write down the 8 digit number that follows the found hex value
put a unlocked SIM in your phone, restart the phone and input your 8 digit number and your phone is unlocked.
thanks!
This thread was a godsend! I got lost in the threads and wanted to make sure it was for the fascinate 4g too! anyway many thanks man!:laugh:
Please need someone to share a backup of the nv_data.bin file from a Telus Fascinate 4G to recover mine that got corrupted.
Thanks in advance!!!
help please
bobmutch2 said:
Now I have a error on the phone "Firmware upgrade encountered an issue, please selecdt recovery mode in Kies & try again.
I have a phone .. yellow ! .. computer
or
[_]../!\..[__]
What do I do now. Surely my phone is not that easily soft-bricked?
Click to expand...
Click to collapse
my phone is stuck with on "Firmware upgrade encountered an issue, please selecdt recovery mode in Kies & try again" message too.
please help. how do i recover my phone when it is stuck on that screen??
need some help
I did up to step 4 and my phone now works but i don't understand step 5 because there is no instructions with it
Wtf is a fascinate 4g there's a fasinate 4g? Lol any glad you got it working. Also the fascinate is hard a **** too brick you unplugged your phone in the middle ofnodin doing something that's probably gonna brick any phone lol
Sent from my SCH-I500 using Xparent Skyblue Tapatalk 2
bobmutch2 said:
This is what I ended up doing...
Setup Telus Samsung Fascinate 4G T959P -- Root, CWM Recovery, 2.3.4 with
1. download and install xvi32 on your computer http://www.chmaas.handshake.de/delphi/freeware/xvi32/xvi32.htm
2. download and install 7zip on your computer for unrar'ing rar files http://www.7-zip.org/download.html
3. download and install odin v1.85 on your computer http://ul.to/xt4607xx
4. download and install via odin Android 2.2.1 followings instructions in the included text file unrar with 7zip http://www.mediafire.com/?xc8xp9knn4n59tt
5. download and install via odin Android 2.3.4 following instructions in the included text file unrar with 7zip http://www.mediafire.com/?2d2v8nexvn88vw1
6. download and install via odin Root and Voodo CWM recovery SGH-T959P-Stock_plus_Voodoo_CWM_2.3.4v3.tar flash in odin PDA with only Auto Reboot and F. Reset Time checked.
7. get back 4G icon input on phone open up dialer app and type *#*#197328640#*#* tap "[6] COMMON", "[6] NV REBUILD", "[1] NV Rebuild", After Reset and then tap back to home, next time you reboot your phone the icon should be back.
8a. fix GPS accuacy by input on phone open up dialer app and type *#*#3214789650#*#* to take you to the AngryGPS menu, select Settings, General Settings, and change OPERATION MODE to STANDALONE.
8b. fix GPS accuacy by input on phone open up dialer app and type *#*#3214789650#*#* to take you to the AngryGPS menu, select Settings, SUPL Settings, and change Sever FQDN Type to Auto Config.
9. unlock by using the following
a) Commands on your computer to get the nv_data.bin which contains the unlock code:
ADB DEVICES -- this should your phone connected as a device with a number
ABD SHELL
su
cat /efs/root/afs/settings/nv_data.bin >> /sdcard/nv_data.bin
exit
b) locate unlock code in nv_data.bin
move the nv_data.bin from /mnt/sdcard/nv_data.bin on your phone to your computer and edit it with xvi32
search for "FF 00 00 00 00 00 30" as a Hex Value in the nv_data.bin file via xvi32
write down the 8 digit number that follows the found hex value
put a unlocked SIM in your phone, restart the phone and input your 8 digit number and your phone is unlocked.
Click to expand...
Click to collapse
Thanks! I thought I bricked my phone... This guide helped me get it back operational...
I know it may be too late but I have the same phone and the links above are dead.Is there a way to reload them,please? Thanks in advance
same here
please re-upload the needed files
I have brick my T959P
bobmutch2 said:
So I got the phone rooted with superoneclick and I was wanting to make a recovery back up I found the cwm-recovery-ALL.tar at http://forum.xda-developers.com/showthread.php?t=942021 and odin3-v1.85'ed it with only auto reboot and F.reset check. I add cwm-recovery-ALL.tar to PDA.
The drivers where installed and the odin message gave me a Added!! so I click on start and it didn't do anything, so I pulled the cable out and rebooted. Now I have a error on the phone "Firmware upgrade encountered an issue, please selecdt recovery mode in Kies & try again.
I have a phone .. yellow ! .. computer
or
[_]../!\..[__]
What do I do now. Surely my phone is not that easily soft-bricked?
I should have this download mode on my phone http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc7/387149_10151162123669441_1216949137_n.jpg
But instead it is this...
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash3/554858_10151162113709441_1081303688_n.jpg
I am considering following this thread here and going to stock...
http://forum.xda-developers.com/showpost.php?p=18823545&postcount=43
ere is the process that this guide will take you through:
1) Flashing your T959P back to 2.2.1 Stock (This gives a nice fresh starting point)
2) Bring the phone up to Stock 2.3.4, and do a factory data reset.
3) Install the SGH-T959P-Stock_plus_Voodoo_CWM_2.3.4.tar to root the stock 2.3.4, and install Voodoo lagfix / ClockworkMod recovery.
But I am thinking all I have done at the worse is put the wrong CWM on my phone so i am working on fixing that.
1. do I ahve the right CWM recovery tar? got it from here http://forum.xda-developers.com/showthread.php?t=942021
2. is there something wrong with my computer that is stopping the flash -- so I have tried 1.85 and 3.07, tried different ports on the same computer, pulled the battery on the phone, tried a different cable, and of course stop and start odin, now I am moving to a different computer.
Here is the log from odin 1.85, it goes like this 5 seconds after I click start and it doesn't reboot.
<ID:0/027> Added!!
<ID:0/027> Odin v.3 engine (ID:27)..
<ID:0/027> File analysis..
<ID:0/027> SetupConnection..
<ID:0/027> Initialzation..
<ID:0/027> Get PIT for mapping.
<ID:0/027> Firmware update start..
<ID:0/027> recovery.bin
<ID:0/027> NAND Write Start!!
<ID:0/027>
<ID:0/027> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
with odin 3.07 here is the log and it hangs there past 5 minutes
<ID:0/028> Added!!
<ID:0/028> Odin v.3 engine (ID:28)..
<ID:0/028> File analysis..
<ID:0/028> SetupConnection..
<ID:0/028> Initialzation..
<ID:0/028> Get PIT for mapping..
<ID:0/028> Firmware update start..
<ID:0/028> recovery.bin
<ID:0/028> NAND Write Start!!
If you have any suggest please post, and I am also hanging over at Freenode channel #Cyanogenmod my handle is d0h, bobmutch, or am1sh
It is Friday in Canada time zone ET 8:30AM and I am back working on this again. HELP HELP HELP
Click to expand...
Click to collapse
Hello from Russia.
I want to make my 959 Telus upgrade, but download software from T959Vibrant. Now i understand, that it is not the same. My phone didn't turn ON. Only download mode. But when i try to download PDA file (for example SGH-T959P-Stock_plus_Voodoo_CWM_2.3.4v2) - the result is FAIL.
Help me please to alive this phone.
What i must to do?
Is anybody there?
Desting77 said:
Hello from Russia.
I want to make my 959 Telus upgrade, but download software from T959Vibrant. Now i understand, that it is not the same. My phone didn't turn ON. Only download mode. But when i try to download PDA file (for example SGH-T959P-Stock_plus_Voodoo_CWM_2.3.4v2) - the result is FAIL.
Help me please to alive this phone.
What i must to do?
Click to expand...
Click to collapse
SOMEBODY!!!! Pls help me!
Desting77 said:
SOMEBODY!!!! Pls help me!
Click to expand...
Click to collapse
To do it, get this file.
https://gofile.io/?c=tJd0Pd
Then get odin v1.85
https://gofile.io/?c=WHkZHO
Launch odin with admin powers (sudo/su for linux, or whatever).
Then click PDA and select the tar.md5 file and start.
Hey everyone, so I've been using a Cyanogenmod S2 for the past few months and everything was great.
Until recently it started to reboot by itself,
until one day when I woke up "Kernel panic upload mode" was on the screen.
I rebooted the phone,
and then was greeted with a black screen after the Samsung Galaxy S2 screen.
The buttons do light up, but nothing else could be done.
I entered download mode to flash a new firmware,
but then somehow it failed and then it says connect to computer to redownload firmware or something when I boot it on right now.
I can't get it to flash anything at all, whenever I use odin it gets stuck at setup connection,
I installed Kies but it doesn't recognize my phone as well, neither does my computer....
Need help. Desperately. :crying::crying::crying:
Can u enter cwm
Sent from my GT-I9100 using xda premium
stopro said:
Can u enter cwm
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
No I can't..
Can only enter Download mode
Then you need to flash a stock rom with Odin. You don't really have any other option.
MistahBungle said:
Then you need to flash a stock rom with Odin. You don't really have any other option.
Click to expand...
Click to collapse
<OSM> T989UVMC6_T989TMB_T989UVMC6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
That's the problem, I can't seem to get Odin to flash no matter what, I've already tried different versions of Odin,
but they always end up with either this (failure) or stuck at setup connection..
Any ideas, please?
There's been many threads re: this issue on here over the past week listing the troubleshooting steps to go thru when Odin won't work, search for those threads (Immortalneo has listed them, go through his posts as a shortcut).
Edit - Hang on a minute, what model number do you have; what's the sticker on the phone chassis under the battery say ?
MistahBungle said:
There's been many threads re: this issue on here over the past week listing the troubleshooting steps to go thru when Odin won't work, search for those threads (Immortalneo has listed them, go through his posts as a shortcut).
Edit - Hang on a minute, what model number do you have; what's the sticker on the phone chassis under the battery say ?
Click to expand...
Click to collapse
I'm using a GT-i19100
I'm going through immortalneo's posts but so far nothing's up..
Am currently following this guide but to no avail, (no .pit file in the compressed .rar file) http://forum.xda-developers.com/showthread.php?p=40154030&highlight=+pit#post40154030
Edit: I think it's a GT-i19100G because I vaguely remember such a thing on the startup screen...
If you've got an I9100, why are you trying to flash firmware for T-989 ?? I suggest you go back to Samfirmware & get an I9100 stock rom for starters.
Ignore that guide; your phone isn't bricked. However, it may well be if you try & flash a PIT file (Although, if you've somehow flashed firmware for a different model including PIT, you may need to at some point. Just not yet). OK. This is the first & last time I'm posting this stuff for the next month:-
Stuff to try when Odin doesn't work
-----------------------------------
*Must run Odin as administrator in Windoze.
*Ensure Kies & all it's processes aren't running in Windoze task manager. Kill them if they are (choose 'kill process tree').
*Try different USB ports; you must be using a 'powered' or mainboard port.
*Try different USB cables (particularly the cable that came with the phone if you're not using it now)
*Try different versions of Odin (search on here/Google)
*Uninstall Kies, reboot, redownload & reinstall it, reboot, try the flash again.
*Check the rom/kernel you download for corruption. Programs like 7Zip, IZarc, WinRar, etc will allow you to 'test' the rom file you download. If there are any errors/any of the files fail the test, bad download. Try again/try downloading with a different internet connection if it keeps happening.
*Run Windoze Update.
*And if all this fails, try a different PC. And if it won't work first time on another PC, go thru the above steps on that PC.
Hello everyone ..
It could solve the problem? I am in a very similar, and have helped me a lot, but none of the options so far have been effective. I'm starting to resign myself to use it as a paperweight, but still have not lost hope.:crying:
Geeenie said:
I'm using a GT-i19100
I'm going through immortalneo's posts but so far nothing's up..
Am currently following this guide but to no avail, (no .pit file in the compressed .rar file) http://forum.xda-developers.com/showthread.php?p=40154030&highlight=+pit#post40154030
Edit: I think it's a GT-i19100G because I vaguely remember such a thing on the startup screen...
Click to expand...
Click to collapse
Stop Now :0 ! You are trying to install a T-Mobile T989 firmware.It's a Galaxy s2 too,but from T-Mobile.It's not the same.Search on Sammobile for an I9100 firmware,preferable Android 4.0.3 or 4.0.4.Of course it gives an error,because it's not the right firmware.
Now this thread is just fun!
Sent from the little guy
Hi all,
A classmate of my son has a bricked GPS 4.2 (YP-GI1CW/XEN). Another classmate tried to root it. But it got wrong.
By reading and searching guides here, i have rooted some htc phones and succesfully tried several roms, so i offered to take a look.
I did not know this player before and i dont know what happened to it. The only think my son has heard is: someone rooted it, installed a rom, made it empty again, searched for the right software (rom), but could not find it.
When we got the phone it only showed the logo of galaxy S2. There is no sd-card inside.
I spend hours of reading, finding the download mode (3-button), odin, heimdall, kies etc.
Tried everything, but can't get it done
Could anyone please help me?
Download method works
The 3-button method works and gets the player in download mode.
Info on screen: (WITHOUT usb connection!)
Odin mode
Product name: YP-GI1
Custom binary download: yes (13 counts)
Current binary: custom
downloading....
do not turn off target!!
Click to expand...
Click to collapse
I tried and maybe did stupid things
I have tried heimdall and kies. Kies does not see the player. Heimdall does, but it did not work or i could not work with it.
Installed and uninstalled Heimdall following their textfile.
I unstalled Kies also. Cleaned up my computer. Updated java. Used ccleaner. etc. Removed unused devices, with 'device remover'
Once or twice i clicked the "re-partition" in odin. With or without PIT-file. Now I read, that this could brick your phone. :silly:
I tried all tabs, now i know i should only use the PDA-tab.
I might have done more stupid things.
I found "one-click" in http://forum.xda-developers.com/showthread.php?t=1153310
It took me a while before seeing that not all things where good for this player type. When rooting htc, a wrong rom won't brick your phone, so i did not take it too seriously.
I tried 1 or 2 roms, before seeing that they where for other player versions.
I tried the GalaxyPlayer-Bootloader.zip from http://forum.xda-developers.com/showthread.php?t=1386669
Now i see it is specially for player 5.0.
Here i also used the partition file.
At last i did:
Installed samsung usb drivers again: "SAMSUNG_USB_Driver_for_Mobile_Phones_v1.5.33.0.exe"
From: http://forum.xda-developers.com/showthread.php?t=961956
When connecting the player to the computer (while already in download mode), windows start 'downloading' the samsung drivers again...
Dont know why and if this can be a problem.
Tried ADB in command, but 'adb devices' does not give a list, but odin seems to work at first.
Odin (3 v3.07) recognizes it and says:
<ID:0/010> Added!!
and: "0:[com100]"
Now in Odin I first uncheck ALL checks like: repartition, auto reboot and refresh time and the others.
I did try the "NAND ERASE" option. Erasing looks to hang, but at last Odin comes back and gives a fail on flashing.
Between every odin try, I remove the battery, unconnect usb and restart the download mode, then connect again, then start Odin again.
Now I tried 3 roms/kernels:
- CWMStockGI1 kernel.tar (http://forum.xda-developers.com/showthread.php?t=2198444)
- yp-gi1cw.factoryfs.rooted.tar (http://forum.xda-developers.com/showthread.php?t=1884071)
- yp-gi1cw.kernel.stock.tar (http://forum.xda-developers.com/showthread.php?t=1884071)
Odin responds when flashing:
<ID:0/010> Added!!
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> normalboot.img
<ID:0/010> NAND Write Start!!
Click to expand...
Click to collapse
Then nothing.....
On unconnecting:
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/010> Removed!!
Click to expand...
Click to collapse
I am out of options
Please help. :crying:
Stop before you actually brick it!!!
STOP EVERYTHING RIGHT NOW!!! First thing's first, this is a samsung device and not a HTC device. You screw up flashing this with the wrong device rom and you are screwed. right now, you are lucky in that the state of the device is currently in the state of what is called a softbrick or download only. you need to get stock files for this exact device, preferably able to be used with odin. then after that you can focus on rooting the device. honestly, dont touch the device right now, post a fourm under q and a asking for who has stock recovery files for a 4.2 international version, (i am guessing that you have the international version due to what your location is set as.) once you get those, then flash them with odin. then once it is working again, you can use this exploit to root it.
http://forum.xda-developers.com/showthread.php?t=1312859&highlight=rooting
good luck.
Thanks for your reply.
I was indeed aware that i should not touch the player, until i got feedback
Though I am a bit suprised that flashing a wrong rom could get me into a hard brick.
I will look for the recovery software you mentioned or ask for it.
joly said:
Thanks for your reply.
I was indeed aware that i should not touch the player, until i got feedback
Though I am a bit suprised that flashing a wrong rom could get me into a hard brick.
I will look for the recovery software you mentioned or ask for it.
Click to expand...
Click to collapse
in terms of the recovery images, your going to need to ask someone with a 4.2 to get them off of theirs and send them to you. odin and hemidall are avaiable in the galaxy player all in one forum at the top of the development page.
interms of the wrong image hard bricking a device, it is possable with samsung devices (i've done it once before and have learned to be carefull). Most samsung galaxy player roms not only contain the rom, but also a kernel. if a kernel that was not made for your device is flashed on to it. it might as well be a hard brick because with out a jtag box, you will never get it working again.
I hope you are able to obtain the files and i wish you the best of luck.
Hello,
So I accidently deleted a folder of photos vs the one photo i wanted to. In my attempts to recover the photos i tried to root my Galaxy S4 GT-I9505. I tried to use Odin and I kept getting an error saying my phone was removed during the process. I tried mutiple USB ports which no luck. Now my phone is stuck with "Firmware has encounted an issue. Please select recovery mode in Kies & try again." So i downloaded Kies which then told me my phone does not support initialization. so i tried Kies 3 which doesnt support my phone model. I am trying to download the firmware from samsung website, but due to where i am stationed the internet isnt the best. Is there anything a super rookie like me can do? would a factory reset solve my issue? Please help me, I need my phone to keep in touch with my family back home.
Mcrblues said:
Hello,
So I accidently deleted a folder of photos vs the one photo i wanted to. In my attempts to recover the photos i tried to root my Galaxy S4 GT-I9505. I tried to use Odin and I kept getting an error saying my phone was removed during the process. I tried mutiple USB ports which no luck. Now my phone is stuck with "Firmware has encounted an issue. Please select recovery mode in Kies & try again." So i downloaded Kies which then told me my phone does not support initialization. so i tried Kies 3 which doesnt support my phone model. I am trying to download the firmware from samsung website, but due to where i am stationed the internet isnt the best. Is there anything a super rookie like me can do? would a factory reset solve my issue? Please help me, I need my phone to keep in touch with my family back home.
Click to expand...
Click to collapse
If you can boot into recovery, a factory reset can't harm. But it might not fix your issues.
Can you still boot your phone into download mode? If yes, then just download the original stock rom from sammobile.com. It's best to choose the version for your country and carrier. Install it with Odin.
If you still want to root, try chain fire autoroot. Again with Odin.
http://autoroot.chainfire.eu
But after flashing stock Rom, I doubt you will be able to recover your photos. So no point in rooting if you don't care about having root.
Sent from my GT-I9505
Yes i can still access download mode..I think i tried using Chainfire with Odin but Rooting is something for another day. I just want to get my phone operational at a minimum. Im currently trying to download firmware from Samsung-update.com or something like that. Is sammobile.com a better site for me to use? I'm at work right now so I am unable to work on the issue at hand but once I get the stock ROM how easy is it to get on to the phone using Odin?
Mcrblues said:
Yes i can still access download mode..I think i tried using Chainfire with Odin but Rooting is something for another day. I just want to get my phone operational at a minimum. Im currently trying to download firmware from Samsung-update.com or something like that. Is sammobile.com a better site for me to use? I'm at work right now so I am unable to work on the issue at hand but once I get the stock ROM how easy is it to get on to the phone using Odin?
Click to expand...
Click to collapse
Samsung-updates is just as good.
The firmware you download will probably be a zip file. You should extract it if it's a zip. You should end up with a file with the extension: tar or tar.md5.
You have to boot your phone into download mode.
Start Odin on the pc in administrator mode.
Connect the phone to the pc. Use the original USB cable that came with the phone.
You should see the text: in Odin when you connect the phone.
Put the firmware you downloaded in Odin in PDA or if you're using the latest version, in AP.
Make sure only: "auto reboot" and "f. Reset time" are checked.
Click start and wait until your phone restarts. (10 minutes or more)
You're done.
EDIT: one more thing, make sure Kies isn't running in the background. It might interfere with Odin.
Sent from my GT-I9505
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUGNF6_I9505H3GGNF2_I9505XXUGNF6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
Ok i want to start by saying i love you both for helping..I got my phone back!!!!!
and ive learned my lesson in rooting..dont do it because im dumb