fellow XDA'ers,
I'm in need of the ROM for the GooPhone (or clone iPhone) model 8 Plus that is based in the MTK6582 Chip.
I did see a post for it (here) , except the ROM that was linked was actually for the MT6580 and NOT the MT6582.
Would really appreciate it if anyone could assist me with this.
thanks!
anyone?
am not getting any love.....
Needed iphone 8 plus clone firmware (MTK6582)
redmachodevil said:
fellow XDA'ers,
I'm in need of the ROM for the GooPhone (or clone iPhone) model 8 Plus that is based in the MTK6582 Chip.
I did see a post for it (here) , except the ROM that was linked was actually for the MT6580 and NOT the MT6582.
Would really appreciate it if anyone could assist me with this.
thanks!
Click to expand...
Click to collapse
pass: asif8plus
http://www.mediafire.com/file/xmbnn...le__4.2.2__ALPS.JB5.MP.V1.27+read+by+asif.rar
:good:
thantzin2018 said:
pass: asif8plus
http://www.mediafire.com/file/xmbnn...le__4.2.2__ALPS.JB5.MP.V1.27+read+by+asif.rar
:good:
Click to expand...
Click to collapse
thanks Asif, didn't work for me
this will work youtube.com/watch?v=n6hewbExv3g&t=1s,link in video description
8 Plus clone - MT6582
jasck32 said:
this will work youtube.com/watch?v=n6hewbExv3g&t=1s,link in video description
Click to expand...
Click to collapse
I tried this manual, although I had the same problem, it happened to me that after flashing my cell phone remained in a state that my display was only black, but the computer would find it, I mean as storage and micro sd. Please advice, I've tried the same firmware from different sources and everything is fine flashing until the end, but still just a black screen.
please, is there any firmware for iphone 11 hdc MT6582
Related
please help rom for clone Note 3 N9006- MTK6572 Dual Core 1.3GHz ram 512mb LCD 5.5inch Android 4.3 …thank very much
Please help me ...................................: Khóc:
can anyone help me
Looks like a BlueBo
This is probably your phone ...
http://www.aliexpress.com/item/5-5-...ll-Phone-Unlocked-GSM-MTK6572/1389400848.html
The screens (from aliexpress page) are quite misleading ... some show a full HD (1920x1080) device display, but the actual drivers are qHD (960x540).
Your best bet is to try some of the stock ROMS from needrom.com ... since you've hard bricked your phone, you don't have much to lose.
The BlueBo ROMs might just work, see ...
http://www.needrom.com/mobile/samsung-galaxy-rom-v6-b6000/
Your phone's hardware specs (CPU/ SoC,memory/ ROM, and display) are very close to the following ...
Cubot C11
Firefly S120
Xolo A600
Galaxy S4 Mini i9190 (aka GT-1318 or i1318)
http://forum.xda-developers.com/showthread.php?t=2507515&nocache=1
I may actually try the BlueBo ROM for the fun of it ... have to verify that I can dump and restore my original modem first
.
I believe i have same model of phone, and now i bricked it, i have backup but i dont have scatter file, so i cant restore my working state, and now i tried hundreds of different roms with flashtool, but screen is messed up, cant see anything
xdafan666 said:
This is probably your phone ...
The screens (from aliexpress page) are quite misleading ... some show a full HD (1920x1080) device display, but the actual drivers are qHD (960x540).
.
Click to expand...
Click to collapse
is there other way to flash the ROM other than via CWM ? the stock recovery can't work / read the zip file, i can't go into download mode since it using mandarin.
use MtkDroidTools
vrvz said:
I believe i have same model of phone, and now i bricked it, i have backup but i dont have scatter file, so i cant restore my working state, and now i tried hundreds of different roms with flashtool, but screen is messed up, cant see anything
Click to expand...
Click to collapse
you can create a scatter file by MtkDroidTools from your backup files.
There are a handful of ROMs available for MT6572. You can port them to your device by following very simple instructions. [For example: http://forum.xda-developers.com/showthread.php?t=2123239 ] You cannot usually get 100% ready made ROM for MTK devices, a little porting is kind of always necessary. But thankfully, that process is limited only to replacing a few files!
stock rom or CWM
viruson said:
please help rom for clone Note 3 N9006- MTK6572 Dual Core 1.3GHz ram 512mb LCD 5.5inch Android 4.3 …thank very much
Click to expand...
Click to collapse
What do you need? Back up of CWM or stock rom?
Tell me I can help
mbba67 said:
What do you need? Back up of CWM or stock rom?
Tell me I can help
Click to expand...
Click to collapse
hello im need this rom please, stock rom please im need my telephone is bricked.
Note 3 Rom Required (MTK 6572)
vrvz said:
I believe i have same model of phone, and now i bricked it, i have backup but i dont have scatter file, so i cant restore my working state, and now i tried hundreds of different roms with flashtool, but screen is messed up, cant see anything
Click to expand...
Click to collapse
i have same note 3 model but hard bricked, i do not have backed rom, so can u please send me the rom for me, i will be grateful to u in this regard, send me rom at [email protected] or upload it to google drive and give me the link to download
mbba67 said:
What do you need? Back up of CWM or stock rom?
Tell me I can help
Click to expand...
Click to collapse
please im need this rom phone is bricked my email is: [email protected] please send
I have a similar device, any progress so far?
viruson said:
please help rom for clone Note 3 N9006- MTK6572 Dual Core 1.3GHz ram 512mb LCD 5.5inch Android 4.3 …thank very much
Click to expand...
Click to collapse
i can help you, tell me what do you want?...si podes escribir español, mejor!!!
clone sm- n9006 mtk 6572 need stock rom...pls
i have also a problem this phone n9006 mtk 6572 i tried to many flash stock rom i can see in nedrom but not good for me......plssssssssssssssss help me ireally really need stock rom.... .you send me in my ym [email protected]
i yo neesito un backup
lesther70 said:
i can help you, tell me what do you want?...si podes escribir español, mejor!!!
Click to expand...
Click to collapse
Yo necesito un backup para hacer un restore a los datos ya q se tildea en eñ boot porfvor mi mail es [email protected] te lo gradeceria mucho
Please upload a NVRAM Backup for note 3 clone device deatails are
512ram, mt6572_S00 chipset, made in vietnam,
Rom sm n9006
I HAVE ROM SAMSUNG GALAXY NOTE 3 SM N9006 (100% tested rom)
SEND ME [email protected]
viruson said:
please help rom for clone Note 3 N9006- MTK6572 Dual Core 1.3GHz ram 512mb LCD 5.5inch Android 4.3 …thank very much
Click to expand...
Click to collapse
Bro have u find any rom for this mobile??
Hey bro
Sorry for late rply.
I tried this one on my device ,it worked fine.
Here is the link https://mega.co.nz/#!Q9VxBLxK!d_dRG0...P4A4_bpe1s6AF8
Searched this link from XDA too.
http://forum.xda-developers.com/showthread.php?t=2725826&page=7
hi!
i have alps's galaxy s5 clone and in cpu-z it saying that my model is sm-g900h(mtk6589_wet_ica)
and alps as the manufacturer. also it has 1 gb of ram and 4 gb rom.
i looked for custom recovery for it and a custom rom but i dont find any...
i did root it already..
do you know this phone? is there a rom and recovery for it?
tnxx...
Hi, I recently came across this device bought by someone, it does a good job trying to look like the s5 but it's got horrible performance. In comparison to the galaxy s2 it's struggling to meet it's benchmarks. I'm it appears to be running nodded kit kat and it's doing a good job giving false settings.
I'm not sure what to suggest, it works as a phone but not very good at all. What root did you use?
dok1230 said:
hi!
i have alps's galaxy s5 clone and in cpu-z it saying that my model is sm-g900h(mtk6589_wet_ica)
and alps as the manufacturer. also it has 1 gb of ram and 4 gb rom.
i looked for custom recovery for it and a custom rom but i dont find any...
i did root it already..
do you know this phone? is there a rom and recovery for it?
tnxx...
Click to expand...
Click to collapse
how did you root your s5 clone . i have the same unit and i can't find any method to root it, help please
dok1230 said:
hi!
i have alps's galaxy s5 clone and in cpu-z it saying that my model is sm-g900h(mtk6589_wet_ica)
and alps as the manufacturer. also it has 1 gb of ram and 4 gb rom.
i looked for custom recovery for it and a custom rom but i dont find any...
i did root it already..
do you know this phone? is there a rom and recovery for it?
tnxx...
Click to expand...
Click to collapse
for mtk6589 follow micromax canvas 4 recovey image. it will work for you.
hello.
dok1230 said:
hi!
i have alps's galaxy s5 clone and in cpu-z it saying that my model is sm-g900h(mtk6589_wet_ica)
and alps as the manufacturer. also it has 1 gb of ram and 4 gb rom.
i looked for custom recovery for it and a custom rom but i dont find any...
i did root it already..
do you know this phone? is there a rom and recovery for it?
tnxx...
Click to expand...
Click to collapse
I have the same cellphone.. I need the stock rom. I made a mistake. I delete a folder. knock lock.. and thats a problem.. because when I turn off the screen, it doesn't turn on.. please make a back up of your ROM and upload it please.. :crying::crying::crying:
the only one best way to root Galaxy S5 clone alps
randombypasser said:
how did you root your s5 clone . i have the same unit and i can't find any method to root it, help please
Click to expand...
Click to collapse
use iRoot to root Galaxy S5 clone alps G900H BUT make sure you have install device driver MTK-MEGAPACK-DOWNLOAD
Cheers !
randombypasser said:
how did you root your s5 clone . i have the same unit and i can't find any method to root it, help please
Click to expand...
Click to collapse
Kingo Android Root. Works in all cellphones.
To root alps-sm-g900h
Hello, try with RootGenius_en, it works for me. I attached a copy, sorry for my english haha. Good Luck.
Hi everyone,
I bought an mini iphone clone on aliexpress. Very little,very cute
Android 8.1 installed but unfortunately no playstore installed and no root.
When I unlocked the bootloader, I kept on saying "Orange state, Your device has been unlocked and cant be trusted"
I flashed the boot.img file with SPflashTool........and now it's stucked. :crying:
Does anyone know what to do? I cannot find any firmware.
Anica I8 Smartphone 2.54" MTK6580M Quad Core 2GB RAM 16GB ROM
- Software version: Android 8.1.0
- alps-mp-o1.mp2
- Processor MT6580
- Kernel 3.18.79+
Does anyone has this phone and know how to handle?
Greetings from Holland
Johan
Me too. Need to know where to find its firmware
superpaddo said:
Hi everyone,
Does anyone know what to do? I cannot find any firmware.
Anica I8 Smartphone 2.54" MTK6580M Quad Core 2GB RAM 16GB ROM
- Software version: Android 8.1.0
- alps-mp-o1.mp2
- Processor MT6580
- Kernel 3.18.79+
Does anyone has this phone and know how to handle?
Greetings from Holland
Johan
Click to expand...
Click to collapse
I have the stable with gapps.
Its android 6 mm stock anica i8.
Got it from the anica supplier
theoppositeman said:
I have the stable with gapps.
Its android 6 mm stock anica i8.
Got it from the anica supplier
Click to expand...
Click to collapse
I also have ANICA I8.
Please share it with me.
rok kan said:
I also have ANICA I8.
Please share it with me.
Click to expand...
Click to collapse
do email me at [email protected]
will share the files i got from the supplier.
the files included simple guide on reflashing the firmware.
firmware based on android 6 (MM).
at least it helps me recover from soft brick
Wow, this post has been awhile now. Does any of you manage to get the little android phone working again? i just brought a i10 model and no gapp in it. Also if there is anyone can help me to get the proper gapp version for it?
Many thanks!
Hello,
I got a new tablet bought from ALI Express.
The data I got with AIDA64 gives me the hardware data as prescribed as per technical specifications.
The problem is an in allot of these tablets , is that the Adroind version is KitKat 4.4.2
Can someone help to provide a custom ROM a let me know how I can get Android 9 on the tablet?
Device model: Jlinksz P10
Hardware: MT6797
Instaled Ram 6GB
Totale Memory 128 GB
Rooted device YES (managed to get this done)
Android 4.4.2 KitKat
Incremental vEN7103
Java VM Version Dalvik 1.6.0
Kernel Version 3.4.67
I do not know of this info is good for use so please let me know if you need more technical descriptions.
These Custom Roms will help alot of people out there.
Thanks in advance for helping out.
@GVS2020
Note that before you can install a Custom ROM you need to install a Custom Recovery ( e.g. TWRP ) matching your device. If you can't find the latter , you may consider to compile TWRP at your own.
GVS2020 said:
Hello,
I got a new tablet bought from ALI Express.
The data I got with AIDA64 gives me the hardware data as prescribed as per technical specifications.
The problem is an in allot of these tablets , is that the Adroind version is KitKat 4.4.2
Can someone help to provide a custom ROM a let me know how I can get Android 9 on the tablet?
Device model: Jlinksz P10
Hardware: MT6797
Instaled Ram 6GB
Totale Memory 128 GB
Rooted device YES (managed to get this done)
Android 4.4.2 KitKat
Incremental vEN7103
Java VM Version Dalvik 1.6.0
Kernel Version 3.4.67
I do not know of this info is good for use so please let me know if you need more technical descriptions.
These Custom Roms will help alot of people out there.
Thanks in advance for helping out.
Click to expand...
Click to collapse
Thanks for the tip I checked but I am a newbie in this matter.
The tablet is rooted now, I managed to do this.
But when I want to reboot the bootloader the screen goes black and stays like that.
I found out also that this is the model
SPEC are model MEDIATEK HELIO X20 -- MT6797
jwoegerbauer said:
@GVS2020
Note that before you can install a Custom ROM you need to install a Custom Recovery ( e.g. TWRP ) matching your device. If you can't find the latter , you may consider to compile TWRP at your own.
Click to expand...
Click to collapse
Thanks for the tip I checked but I am a newbie in this matter.
The tablet is rooted now, I managed to do this.
But when I want to reboot the bootloader the screen goes black and stays like that.
I found out also that this is the model
SPEC are model MEDIATEK HELIO X20 -- MT6797
GVS2020 said:
Thanks for the tip I checked but I am a newbie in this matter.
The tablet is rooted now, I managed to do this.
But when I want to reboot the bootloader the screen goes black and stays like that.
I found out also that this is the model
SPEC are model MEDIATEK HELIO X20 -- MT6797
Click to expand...
Click to collapse
--------------------
Hello friend.
Did you find something about this device? I have bought one recently and I would like installing a newer Android version.
Thanks in advance.
Please help me! I got the same MTK6797 HelioX20 tablet with android 10. All games except the simplest ones crash either immediately or after a few minutes. Help me find the firmware on android 8 or 7
Hola compre table china con mt6797, dos sim, con android 10, alguien puede proporcionarme la rom.
Modelo A9000, Compilacion LMY471, Versión HJC 2020 06 01-92, mEDIATEK hELIO X20, MT6797.
No sale del logo, ya probe hard reset.
Hello, I need a custom room for my Chinese Tablet
ram 6, Rom 128, MTK 6797, Camera 5, 13, 12 inches Tablet
Hi there! My buddy has this phone, it is a Chinese clone but I am not sure if it’s 7 Plus or 8 Plus. All I know is that it has MTK6582. I have downloaded some ROMs but some of them are giving black screen and some others are not working at all. Can somebody help me with a fully tested ROM? Thank you!
Request it from vendor.