Hello,
I got a new tablet bought from ALI Express.
The data I got with AIDA64 gives me the hardware data as prescribed as per technical specifications.
The problem is an in allot of these tablets , is that the Adroind version is KitKat 4.4.2
Can someone help to provide a custom ROM a let me know how I can get Android 9 on the tablet?
Device model: Jlinksz P10
Hardware: MT6797
Instaled Ram 6GB
Totale Memory 128 GB
Rooted device YES (managed to get this done)
Android 4.4.2 KitKat
Incremental vEN7103
Java VM Version Dalvik 1.6.0
Kernel Version 3.4.67
I do not know of this info is good for use so please let me know if you need more technical descriptions.
These Custom Roms will help alot of people out there.
Thanks in advance for helping out.
@GVS2020
Note that before you can install a Custom ROM you need to install a Custom Recovery ( e.g. TWRP ) matching your device. If you can't find the latter , you may consider to compile TWRP at your own.
GVS2020 said:
Hello,
I got a new tablet bought from ALI Express.
The data I got with AIDA64 gives me the hardware data as prescribed as per technical specifications.
The problem is an in allot of these tablets , is that the Adroind version is KitKat 4.4.2
Can someone help to provide a custom ROM a let me know how I can get Android 9 on the tablet?
Device model: Jlinksz P10
Hardware: MT6797
Instaled Ram 6GB
Totale Memory 128 GB
Rooted device YES (managed to get this done)
Android 4.4.2 KitKat
Incremental vEN7103
Java VM Version Dalvik 1.6.0
Kernel Version 3.4.67
I do not know of this info is good for use so please let me know if you need more technical descriptions.
These Custom Roms will help alot of people out there.
Thanks in advance for helping out.
Click to expand...
Click to collapse
Thanks for the tip I checked but I am a newbie in this matter.
The tablet is rooted now, I managed to do this.
But when I want to reboot the bootloader the screen goes black and stays like that.
I found out also that this is the model
SPEC are model MEDIATEK HELIO X20 -- MT6797
jwoegerbauer said:
@GVS2020
Note that before you can install a Custom ROM you need to install a Custom Recovery ( e.g. TWRP ) matching your device. If you can't find the latter , you may consider to compile TWRP at your own.
Click to expand...
Click to collapse
Thanks for the tip I checked but I am a newbie in this matter.
The tablet is rooted now, I managed to do this.
But when I want to reboot the bootloader the screen goes black and stays like that.
I found out also that this is the model
SPEC are model MEDIATEK HELIO X20 -- MT6797
GVS2020 said:
Thanks for the tip I checked but I am a newbie in this matter.
The tablet is rooted now, I managed to do this.
But when I want to reboot the bootloader the screen goes black and stays like that.
I found out also that this is the model
SPEC are model MEDIATEK HELIO X20 -- MT6797
Click to expand...
Click to collapse
--------------------
Hello friend.
Did you find something about this device? I have bought one recently and I would like installing a newer Android version.
Thanks in advance.
Please help me! I got the same MTK6797 HelioX20 tablet with android 10. All games except the simplest ones crash either immediately or after a few minutes. Help me find the firmware on android 8 or 7
Hola compre table china con mt6797, dos sim, con android 10, alguien puede proporcionarme la rom.
Modelo A9000, Compilacion LMY471, Versión HJC 2020 06 01-92, mEDIATEK hELIO X20, MT6797.
No sale del logo, ya probe hard reset.
Hello, I need a custom room for my Chinese Tablet
ram 6, Rom 128, MTK 6797, Camera 5, 13, 12 inches Tablet
Related
Hello everybody.
I have this gadgetsfactory.com/c7500-smart-phone-android-2-3-os-3g-gps-wifi-4-3-inch-multi-touch-screen.html MTK6573 android phone (by GAGA as printed on the box) which i might add is half-bricked at this moment .
I have no backup of the ROM and the simple factory reset was useless from the beginning of its short life.
I would appreciate if someone has a backup ROM for this model ,or if you have any ideas i would be glad to hear it.
A few information you that might help you are the following:
Baseband version MAUI.11AMD.W11.37.SPV6 , 2011/10/29
Kernel version 2.6.35.7
Build Number 11HX8.Y8.120316.AD2_3_5_V3.QHDC_CN.COM_MCP_HTClogo
Thank you for your time
No ideas at all?
Try to port other MTK6573 Device rom
Sent from my Micromax A50 using xda app-developers app
Thank you for your answer.After reading a few things about porting roms (http://forum.xda-developers.com/showthread.php?t=1941239 & http://www.androidgladiator.com/2013/07/how-to-port-rom-for-mediatek-based-roms.html) i understand that i cannot do it because i don't have any base rom at all .I cannot make a backup of mine since i cannot boot into the OS .Neither Recovery mode has such a function .Thats why i need the stock rom.
daf3m said:
Hello everybody.
I have this gadgetsfactory.com/c7500-smart-phone-android-2-3-os-3g-gps-wifi-4-3-inch-multi-touch-screen.html MTK6573 android phone (by GAGA as printed on the box) which i might add is half-bricked at this moment .
I have no backup of the ROM and the simple factory reset was useless from the beginning of its short life.
I would appreciate if someone has a backup ROM for this model ,or if you have any ideas i would be glad to hear it.
A few information you that might help you are the following:
Baseband version MAUI.11AMD.W11.37.SPV6 , 2011/10/29
Kernel version 2.6.35.7
Build Number 11HX8.Y8.120316.AD2_3_5_V3.QHDC_CN.COM_MCP_HTClogo
Thank you for your time
Click to expand...
Click to collapse
If this device realy have MTK 6573? my device have MT 6575 but BaseBand, Kernel and BuildNumber are same as yours, and i found way to install Android 4.0.4 look here http://www.needrom.com/mobile/android-3g-c7500/ If still need for you.
I think this will help you becouse i flashed to my 512 mb ram version 1gb ram version rom from thl, so you can flash unbrick with SP Flash Tool this have 512mb ram version it has original phone kernel, boot, DSP_BL, Preloader, all other is from mtk6573/6575 device universal.
x2xdj said:
If this device realy have MTK 6573? my device have MT 6575 but BaseBand, Kernel and BuildNumber are same as yours, and i found way to install Android 4.0.4 look here http://www.needrom.com/mobile/android-3g-c7500/ If still need for you.
I think this will help you becouse i flashed to my 512 mb ram version 1gb ram version rom from thl, so you can flash unbrick with SP Flash Tool this have 512mb ram version it has original phone kernel, boot, DSP_BL, Preloader, all other is from mtk6573/6575 device universal.
Click to expand...
Click to collapse
Thank you but i cannot validate your method since i don't have it anymore.But i am sure it was 6573 cpu and 6575.Later models of the same design were equiped with the 6575 cpu.
please help rom for clone Note 3 N9006- MTK6572 Dual Core 1.3GHz ram 512mb LCD 5.5inch Android 4.3 …thank very much
Please help me ...................................: Khóc:
can anyone help me
Looks like a BlueBo
This is probably your phone ...
http://www.aliexpress.com/item/5-5-...ll-Phone-Unlocked-GSM-MTK6572/1389400848.html
The screens (from aliexpress page) are quite misleading ... some show a full HD (1920x1080) device display, but the actual drivers are qHD (960x540).
Your best bet is to try some of the stock ROMS from needrom.com ... since you've hard bricked your phone, you don't have much to lose.
The BlueBo ROMs might just work, see ...
http://www.needrom.com/mobile/samsung-galaxy-rom-v6-b6000/
Your phone's hardware specs (CPU/ SoC,memory/ ROM, and display) are very close to the following ...
Cubot C11
Firefly S120
Xolo A600
Galaxy S4 Mini i9190 (aka GT-1318 or i1318)
http://forum.xda-developers.com/showthread.php?t=2507515&nocache=1
I may actually try the BlueBo ROM for the fun of it ... have to verify that I can dump and restore my original modem first
.
I believe i have same model of phone, and now i bricked it, i have backup but i dont have scatter file, so i cant restore my working state, and now i tried hundreds of different roms with flashtool, but screen is messed up, cant see anything
xdafan666 said:
This is probably your phone ...
The screens (from aliexpress page) are quite misleading ... some show a full HD (1920x1080) device display, but the actual drivers are qHD (960x540).
.
Click to expand...
Click to collapse
is there other way to flash the ROM other than via CWM ? the stock recovery can't work / read the zip file, i can't go into download mode since it using mandarin.
use MtkDroidTools
vrvz said:
I believe i have same model of phone, and now i bricked it, i have backup but i dont have scatter file, so i cant restore my working state, and now i tried hundreds of different roms with flashtool, but screen is messed up, cant see anything
Click to expand...
Click to collapse
you can create a scatter file by MtkDroidTools from your backup files.
There are a handful of ROMs available for MT6572. You can port them to your device by following very simple instructions. [For example: http://forum.xda-developers.com/showthread.php?t=2123239 ] You cannot usually get 100% ready made ROM for MTK devices, a little porting is kind of always necessary. But thankfully, that process is limited only to replacing a few files!
stock rom or CWM
viruson said:
please help rom for clone Note 3 N9006- MTK6572 Dual Core 1.3GHz ram 512mb LCD 5.5inch Android 4.3 …thank very much
Click to expand...
Click to collapse
What do you need? Back up of CWM or stock rom?
Tell me I can help
mbba67 said:
What do you need? Back up of CWM or stock rom?
Tell me I can help
Click to expand...
Click to collapse
hello im need this rom please, stock rom please im need my telephone is bricked.
Note 3 Rom Required (MTK 6572)
vrvz said:
I believe i have same model of phone, and now i bricked it, i have backup but i dont have scatter file, so i cant restore my working state, and now i tried hundreds of different roms with flashtool, but screen is messed up, cant see anything
Click to expand...
Click to collapse
i have same note 3 model but hard bricked, i do not have backed rom, so can u please send me the rom for me, i will be grateful to u in this regard, send me rom at [email protected] or upload it to google drive and give me the link to download
mbba67 said:
What do you need? Back up of CWM or stock rom?
Tell me I can help
Click to expand...
Click to collapse
please im need this rom phone is bricked my email is: [email protected] please send
I have a similar device, any progress so far?
viruson said:
please help rom for clone Note 3 N9006- MTK6572 Dual Core 1.3GHz ram 512mb LCD 5.5inch Android 4.3 …thank very much
Click to expand...
Click to collapse
i can help you, tell me what do you want?...si podes escribir español, mejor!!!
clone sm- n9006 mtk 6572 need stock rom...pls
i have also a problem this phone n9006 mtk 6572 i tried to many flash stock rom i can see in nedrom but not good for me......plssssssssssssssss help me ireally really need stock rom.... .you send me in my ym [email protected]
i yo neesito un backup
lesther70 said:
i can help you, tell me what do you want?...si podes escribir español, mejor!!!
Click to expand...
Click to collapse
Yo necesito un backup para hacer un restore a los datos ya q se tildea en eñ boot porfvor mi mail es [email protected] te lo gradeceria mucho
Please upload a NVRAM Backup for note 3 clone device deatails are
512ram, mt6572_S00 chipset, made in vietnam,
Rom sm n9006
I HAVE ROM SAMSUNG GALAXY NOTE 3 SM N9006 (100% tested rom)
SEND ME [email protected]
viruson said:
please help rom for clone Note 3 N9006- MTK6572 Dual Core 1.3GHz ram 512mb LCD 5.5inch Android 4.3 …thank very much
Click to expand...
Click to collapse
Bro have u find any rom for this mobile??
Hey bro
Sorry for late rply.
I tried this one on my device ,it worked fine.
Here is the link https://mega.co.nz/#!Q9VxBLxK!d_dRG0...P4A4_bpe1s6AF8
Searched this link from XDA too.
http://forum.xda-developers.com/showthread.php?t=2725826&page=7
Greetings, I am new to this forums. I need a custom rom for my iBall Octa-A41 from 4.4.2 to nougat or something above lollipop. So I would be really grateful if someone helps me out here to get a custom rom for my Old Tablet.
Or , I would be really happy if anyone would say me how to build one or port one as it uses a MediaTek MT6592 with kernel version 3.4.67
Regards,
Rayyan Hussain
YouTube video h tt ps : // y outu. be/0rE IJyMTI-c
Sorry I don't have xda account delete spaces
I have octa a41 too customer care is worst
Did you try it? And do you have custom rom running if yes please give me yourcontact details because all the romscrash randomly and shows black screen every often
fellow XDA'ers,
I'm in need of the ROM for the GooPhone (or clone iPhone) model 8 Plus that is based in the MTK6582 Chip.
I did see a post for it (here) , except the ROM that was linked was actually for the MT6580 and NOT the MT6582.
Would really appreciate it if anyone could assist me with this.
thanks!
anyone?
am not getting any love.....
Needed iphone 8 plus clone firmware (MTK6582)
redmachodevil said:
fellow XDA'ers,
I'm in need of the ROM for the GooPhone (or clone iPhone) model 8 Plus that is based in the MTK6582 Chip.
I did see a post for it (here) , except the ROM that was linked was actually for the MT6580 and NOT the MT6582.
Would really appreciate it if anyone could assist me with this.
thanks!
Click to expand...
Click to collapse
pass: asif8plus
http://www.mediafire.com/file/xmbnn...le__4.2.2__ALPS.JB5.MP.V1.27+read+by+asif.rar
:good:
thantzin2018 said:
pass: asif8plus
http://www.mediafire.com/file/xmbnn...le__4.2.2__ALPS.JB5.MP.V1.27+read+by+asif.rar
:good:
Click to expand...
Click to collapse
thanks Asif, didn't work for me
this will work youtube.com/watch?v=n6hewbExv3g&t=1s,link in video description
8 Plus clone - MT6582
jasck32 said:
this will work youtube.com/watch?v=n6hewbExv3g&t=1s,link in video description
Click to expand...
Click to collapse
I tried this manual, although I had the same problem, it happened to me that after flashing my cell phone remained in a state that my display was only black, but the computer would find it, I mean as storage and micro sd. Please advice, I've tried the same firmware from different sources and everything is fine flashing until the end, but still just a black screen.
please, is there any firmware for iphone 11 hdc MT6582
Hi everyone,
I bought an mini iphone clone on aliexpress. Very little,very cute
Android 8.1 installed but unfortunately no playstore installed and no root.
When I unlocked the bootloader, I kept on saying "Orange state, Your device has been unlocked and cant be trusted"
I flashed the boot.img file with SPflashTool........and now it's stucked. :crying:
Does anyone know what to do? I cannot find any firmware.
Anica I8 Smartphone 2.54" MTK6580M Quad Core 2GB RAM 16GB ROM
- Software version: Android 8.1.0
- alps-mp-o1.mp2
- Processor MT6580
- Kernel 3.18.79+
Does anyone has this phone and know how to handle?
Greetings from Holland
Johan
Me too. Need to know where to find its firmware
superpaddo said:
Hi everyone,
Does anyone know what to do? I cannot find any firmware.
Anica I8 Smartphone 2.54" MTK6580M Quad Core 2GB RAM 16GB ROM
- Software version: Android 8.1.0
- alps-mp-o1.mp2
- Processor MT6580
- Kernel 3.18.79+
Does anyone has this phone and know how to handle?
Greetings from Holland
Johan
Click to expand...
Click to collapse
I have the stable with gapps.
Its android 6 mm stock anica i8.
Got it from the anica supplier
theoppositeman said:
I have the stable with gapps.
Its android 6 mm stock anica i8.
Got it from the anica supplier
Click to expand...
Click to collapse
I also have ANICA I8.
Please share it with me.
rok kan said:
I also have ANICA I8.
Please share it with me.
Click to expand...
Click to collapse
do email me at [email protected]
will share the files i got from the supplier.
the files included simple guide on reflashing the firmware.
firmware based on android 6 (MM).
at least it helps me recover from soft brick
Wow, this post has been awhile now. Does any of you manage to get the little android phone working again? i just brought a i10 model and no gapp in it. Also if there is anyone can help me to get the proper gapp version for it?
Many thanks!