[TOOL] Possible fix to bricked devices. - Moto G4 Play ROMs, Kernels, Recoveries, & Other De

I'll make it short. I read that some Qualcomm devices get to recover through the installation/flashing of the bootloader from the external SD (the physical SD Card).
So I'd like you to try out the image I've done and see if something changes in your device. This one should include the first four partitions which are required to get the system up.
DON'T TRY IT IN A WORKING PHONE IF YOU AREN'T DUMB, it shouldn't work, but if I were you, I wouldn't try at a first place.
This is the command I used: dd if=/dev/block/bootdevice/mmcblk0 of=/sdcard/test.img count=42572
Count is a combination of the blocks from the first four partitions.
Download: https://www.androidfilehost.com/?fid=817906626617957400
MD5: 6c7903c47f5cd86e2c1bb10266d2671d
Put it right in the root of your external SD.
If its not working, you can also try this:
Salik Iqbal said:
Download qdloader 9008 drivers.. and click blank flash batch.
https://mega.nz/#!orhREJzD!LpueUHAC_hTBiObhO2wtBZWCSntL94335biVP87Vgcs
Click to expand...
Click to collapse

---

@facuarmo, can you give a clearer explanation about this method? I'm trying to help some owners of G4 Play here in Brazil, and they are a lil bit confused with how this procedure works.
Thanks in advance!

---

Fanttato said:
@facuarmo, can you give a clearer explanation about this method? I'm trying to help some owners of G4 Play here in Brazil, and they are a lil bit confused with how this procedure works.
Thanks in advance!
Click to expand...
Click to collapse
There isn't a real big deal. This just flashes from byte 0 to the end of this image on the flash memory.
The procedure is pretty simple.
Take off the battery.
Take off the SD card.
Plug it in a computer.
Format to FAT32 if you didn't.
Put the file on the root of the memory, without any other file.
Download Win32 Disk Imager
Flash loader.img to your sdcard.
Unplug.
Put back on phone.
Put battery and try to turn it on.

---

facuarmo said:
There isn't a real big deal. This just flashes from byte 0 to the end of this image on the flash memory.
The procedure is pretty simple.
Take off the battery.
Take off the SD card.
Plug it in a computer.
Format to FAT32 if you didn't.
Put the file on the root of the memory, without any other file.
Unplug.
Put back on phone.
Put battery and try to turn it on.
Click to expand...
Click to collapse
Thanks for the answer! I'll pass this info ahead!

---

Fanttato said:
Thanks for the answer! I'll pass this info ahead!
Click to expand...
Click to collapse
No problem! Please take in mind it hasn't been tested.

---

One more question @facuarmo (sorry about that)... How do we use that command "dd if=/dev/block/bootdevice/mmcblk0 of=/sdcard/test.img count=42572", the info "MD5: 6c7903c47f5cd86e2c1bb10266d2671d" has which use for?
---------- Post added at 19:33 ---------- Previous post was at 19:29 ----------
facuarmo said:
No problem! Please take in mind it hasn't been tested.
Click to expand...
Click to collapse
That's what we are doing, testing ! hahaha
Thanks for trying to help ! We'll see if it work or, at least, thr to make it work.

---

Fanttato said:
One more question @facuarmo (sorry about that)... How do we use that command "dd if=/dev/block/bootdevice/mmcblk0 of=/sdcard/test.img count=42572", the info "MD5: 6c7903c47f5cd86e2c1bb10266d2671d" has which use for?
---------- Post added at 19:33 ---------- Previous post was at 19:29 ----------
That's what we are doing, testing ! hahaha
Thanks for trying to help ! We'll see if it work or, at least, thr to make it work.
Click to expand...
Click to collapse
You don't need to use that command. It's just a way to show and be open about how I managed to get that image.
The MD5 is used to verify if the download has been successful ad it's just an optional step.

---

facuarmo said:
You don't need to use that command. It's just a way to show and be open about how I managed to get that image.
Click to expand...
Click to collapse
Ok. I'll see if someone got sucess doing this and will give you a feedback as soon as possible.
Thanks again!

---

Updated instructions.

---

Are you guys trying too unbrick harpia?

---

Salik Iqbal said:
Are you guys trying too unbrick harpia?
Click to expand...
Click to collapse
That's the idea, has anyone tried?

---

facuarmo said:
That's the idea, has anyone tried?
Click to expand...
Click to collapse
If its qdloader 9008 then try this:
Download qdloader 9008 drivers.. and click blank flash batch.
https://mega.nz/#!orhREJzD!LpueUHAC_hTBiObhO2wtBZWCSntL94335biVP87Vgcs

---

Salik Iqbal said:
If its qdloader 9008 then try this:
Download qdloader 9008 drivers.. and click blank flash batch.
https://mega.nz/#!orhREJzD!LpueUHAC_hTBiObhO2wtBZWCSntL94335biVP87Vgcs
Click to expand...
Click to collapse
This is another gr8 option. I don't know where u got it but this could work.

---

So i have tested this today, and its working fine !
facuarmo said:
That's the idea, has anyone tried?
Click to expand...
Click to collapse
facuarmo said:
This is another gr8 option. I don't know where u got it but this could work.
Click to expand...
Click to collapse

---

Salik Iqbal said:
So i have tested this today, and its working fine !
Click to expand...
Click to collapse
Jesus, that's gr8.

---

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
harpia, blank flash FAILED

---

68/5000
here does not appear the option to select sd,
I tried in several ways

---

tiago ferreira said:
68/5000
here does not appear the option to select sd,
I tried in several ways
Click to expand...
Click to collapse
According to this thread (see translation below) this is cause you've had a bootloader whose version is greater than the one you're tryna install. You must wait till Motorola posts last Nougat "soak test" bootloader.
http://www.htcmania.com/showthread.php?t=938478
If the program shows the message FAILED (blank-flash:sdl-transfer-image:sdl-hello:invalid HDLC frame) it's okay, it's just that the bootloader version isn't compatible [...]
Click to expand...
Click to collapse
tiago ferreira said:
68/5000
here does not appear the option to select sd,
I tried in several ways
Click to expand...
Click to collapse
Holy shiz! You can't just do it right from another device through MTP. The SD card must be physically connected to the computer through an internal or USB adapter.

---

facuarmo said:
This is another gr8 option. I don't know where u got it but this could work.
Click to expand...
Click to collapse
It is inside firmware already by Motorola itself: fastboot_harpia_vzw_oem_vzw_user_6.0.1_MPIS24.241-2.35-1-17_17_release-keys-cid2_vzw.tar.gz.gz
This firmware is available publicly on all known Motorola firmware sites.
@tiago ferreira:
Are you sure you have harpia verizon? and not other model/carrier?

---

Guys I hv a problem with my Moto g4 play
When I switched on or restart my phone automatically fastboot screen open and then manually click Power button to start the phone.
It's happens when I unlocked my bootloader.
By the way twrp recovery and other stuff is working well. So guys what should I do? Any solution for this?