Power Off your Samsung Phone
Remove the back cover of your Samsung phone
Put your device in EDL mode, short the two edl pins as shown in the picture
A02s EDL Point Pic
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Connect your phone to the Computer
You will see the device is in qualcomm qdloader 9008 mode in device manager
Download & extract the DRT KEY SAMSUNG TOOL tool on your computer
Run “DRT KEY SAMSUNG A02s.exe” as Admin
Wait till finished
That’s it.
CREDITS: This tool is developed by [email protected]
Help me, i look the device is not see qualcomm qdloader 9008 mode in device manager
dnblan said:
Help me, i look the device is not see qualcomm qdloader 9008 mode in device manager
Click to expand...
Click to collapse
You will need to open the device and short the test points.
Hi! I´m trying to short the test point in a A02s but the pcb looks different to the one shown in the picture and I don't know what are the test points in this one. I made sure that is a A02s. Can you pleas help me? TIA
KiwiVax said:
Hi! I´m trying to short the test point in a A02s but the pcb looks different to the one shown in the picture and I don't know what are the test points in this one. I made sure that is a A02s. Can you pleas help me? TIA
Click to expand...
Click to collapse
Thankyou for uploading the image of the PCB, Can you please upload a picture with back Camera's removed from the main board?
There might be some test points beneath the Camera Strip.
Sometimes for a different hardware variant the test point are different.
dnblan said:
Help me, i look the device is not see qualcomm qdloader 9008 mode in device manager
Click to expand...
Click to collapse
Please verify you have drivers installed. Sorry for the delayed reply.
KiwiVax said:
Hi! I´m trying to short the test point in a A02s but the pcb looks different to the one shown in the picture and I don't know what are the test points in this one. I made sure that is a A02s. Can you pleas help me? TIA
Click to expand...
Click to collapse
I probably see these two points as Test point but please proceed with caution.
mvikrant97 said:
View attachment 5806129
I probably see these two points as Test point but please proceed with caution.
Click to expand...
Click to collapse
mvikrant97 said:
View attachment 5806129
I probably see these two points as Test point but please proceed with caution.
Click to expand...
Click to collapse
TY. I tried those two and didn´t work. These is the pcb without the cameras connected
KiwiVax said:
TY. I tried those two and didn´t work. These is the pcb without the cameras connected
Click to expand...
Click to collapse
I cannot find the test points to this motherboard without physical access to it.
Also this motherboard is different from what we have in India.
Do you have a digital multimeter?
mvikrant97 said:
I cannot find the test points to this motherboard without physical access to it.
Also this motherboard is different from what we have in India.
Do you have a digital multimeter?
Click to expand...
Click to collapse
Also does your phone have a qualcomm chipset?
mvikrant97 said:
Also does your phone have a qualcomm chipset?
Click to expand...
Click to collapse
Also I have found out on gsm forum that the test points are the one I had provided to you earlier.
You can check that post here
KiwiVax said:
TY. I tried those two and didn´t work. These is the pcb without the cameras connected
Click to expand...
Click to collapse
Please make sure you have necessary drivers installed for the brom mode like MTK drivers
thank you this worked great
Hossein75rn said:
thank you this worked great
Click to expand...
Click to collapse
Can you please share your motherboard image?
I have a SM-A025V version with the same board as in post #12. Got it into 9008 mode and ran the DRT key, but there were errors.
NickNaym said:
I have a SM-A025V version with the same board as in post #12. Got it into 9008 mode and ran the DRT key, but there were errors.
Click to expand...
Click to collapse
Run in Administrator mode.
I ran it in admin mode following the instructions in post #1. Tried several times and same errors given.
NickNaym said:
I ran it in admin mode following the instructions in post #1. Tried several times and same errors given.
Click to expand...
Click to collapse
Does the V in the phone's model stands for Verizon?
mvikrant97 said:
Does the V in the phone's model stands for Verizon?
Click to expand...
Click to collapse
Yes. It's the U.S. Verizon variant of the A02S.
Related
I'll make it short. I read that some Qualcomm devices get to recover through the installation/flashing of the bootloader from the external SD (the physical SD Card).
So I'd like you to try out the image I've done and see if something changes in your device. This one should include the first four partitions which are required to get the system up.
DON'T TRY IT IN A WORKING PHONE IF YOU AREN'T DUMB, it shouldn't work, but if I were you, I wouldn't try at a first place.
This is the command I used: dd if=/dev/block/bootdevice/mmcblk0 of=/sdcard/test.img count=42572
Count is a combination of the blocks from the first four partitions.
Download: https://www.androidfilehost.com/?fid=817906626617957400
MD5: 6c7903c47f5cd86e2c1bb10266d2671d
Put it right in the root of your external SD.
If its not working, you can also try this:
Salik Iqbal said:
Download qdloader 9008 drivers.. and click blank flash batch.
https://mega.nz/#!orhREJzD!LpueUHAC_hTBiObhO2wtBZWCSntL94335biVP87Vgcs
Click to expand...
Click to collapse
@facuarmo, can you give a clearer explanation about this method? I'm trying to help some owners of G4 Play here in Brazil, and they are a lil bit confused with how this procedure works.
Thanks in advance!
Fanttato said:
@facuarmo, can you give a clearer explanation about this method? I'm trying to help some owners of G4 Play here in Brazil, and they are a lil bit confused with how this procedure works.
Thanks in advance!
Click to expand...
Click to collapse
There isn't a real big deal. This just flashes from byte 0 to the end of this image on the flash memory.
The procedure is pretty simple.
Take off the battery.
Take off the SD card.
Plug it in a computer.
Format to FAT32 if you didn't.
Put the file on the root of the memory, without any other file.
Download Win32 Disk Imager
Flash loader.img to your sdcard.
Unplug.
Put back on phone.
Put battery and try to turn it on.
facuarmo said:
There isn't a real big deal. This just flashes from byte 0 to the end of this image on the flash memory.
The procedure is pretty simple.
Take off the battery.
Take off the SD card.
Plug it in a computer.
Format to FAT32 if you didn't.
Put the file on the root of the memory, without any other file.
Unplug.
Put back on phone.
Put battery and try to turn it on.
Click to expand...
Click to collapse
Thanks for the answer! I'll pass this info ahead!
Fanttato said:
Thanks for the answer! I'll pass this info ahead!
Click to expand...
Click to collapse
No problem! Please take in mind it hasn't been tested.
One more question @facuarmo (sorry about that)... How do we use that command "dd if=/dev/block/bootdevice/mmcblk0 of=/sdcard/test.img count=42572", the info "MD5: 6c7903c47f5cd86e2c1bb10266d2671d" has which use for?
---------- Post added at 19:33 ---------- Previous post was at 19:29 ----------
facuarmo said:
No problem! Please take in mind it hasn't been tested.
Click to expand...
Click to collapse
That's what we are doing, testing ! hahaha
Thanks for trying to help ! We'll see if it work or, at least, thr to make it work.
Fanttato said:
One more question @facuarmo (sorry about that)... How do we use that command "dd if=/dev/block/bootdevice/mmcblk0 of=/sdcard/test.img count=42572", the info "MD5: 6c7903c47f5cd86e2c1bb10266d2671d" has which use for?
---------- Post added at 19:33 ---------- Previous post was at 19:29 ----------
That's what we are doing, testing ! hahaha
Thanks for trying to help ! We'll see if it work or, at least, thr to make it work.
Click to expand...
Click to collapse
You don't need to use that command. It's just a way to show and be open about how I managed to get that image.
The MD5 is used to verify if the download has been successful ad it's just an optional step.
facuarmo said:
You don't need to use that command. It's just a way to show and be open about how I managed to get that image.
Click to expand...
Click to collapse
Ok. I'll see if someone got sucess doing this and will give you a feedback as soon as possible.
Thanks again!
Updated instructions.
Are you guys trying too unbrick harpia?
Salik Iqbal said:
Are you guys trying too unbrick harpia?
Click to expand...
Click to collapse
That's the idea, has anyone tried?
facuarmo said:
That's the idea, has anyone tried?
Click to expand...
Click to collapse
If its qdloader 9008 then try this:
Download qdloader 9008 drivers.. and click blank flash batch.
https://mega.nz/#!orhREJzD!LpueUHAC_hTBiObhO2wtBZWCSntL94335biVP87Vgcs
Salik Iqbal said:
If its qdloader 9008 then try this:
Download qdloader 9008 drivers.. and click blank flash batch.
https://mega.nz/#!orhREJzD!LpueUHAC_hTBiObhO2wtBZWCSntL94335biVP87Vgcs
Click to expand...
Click to collapse
This is another gr8 option. I don't know where u got it but this could work.
So i have tested this today, and its working fine !
facuarmo said:
That's the idea, has anyone tried?
Click to expand...
Click to collapse
facuarmo said:
This is another gr8 option. I don't know where u got it but this could work.
Click to expand...
Click to collapse
Salik Iqbal said:
So i have tested this today, and its working fine !
Click to expand...
Click to collapse
Jesus, that's gr8.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
harpia, blank flash FAILED
68/5000
here does not appear the option to select sd,
I tried in several ways
tiago ferreira said:
68/5000
here does not appear the option to select sd,
I tried in several ways
Click to expand...
Click to collapse
According to this thread (see translation below) this is cause you've had a bootloader whose version is greater than the one you're tryna install. You must wait till Motorola posts last Nougat "soak test" bootloader.
http://www.htcmania.com/showthread.php?t=938478
If the program shows the message FAILED (blank-flash:sdl-transfer-image:sdl-hello:invalid HDLC frame) it's okay, it's just that the bootloader version isn't compatible [...]
Click to expand...
Click to collapse
tiago ferreira said:
68/5000
here does not appear the option to select sd,
I tried in several ways
Click to expand...
Click to collapse
Holy shiz! You can't just do it right from another device through MTP. The SD card must be physically connected to the computer through an internal or USB adapter.
facuarmo said:
This is another gr8 option. I don't know where u got it but this could work.
Click to expand...
Click to collapse
It is inside firmware already by Motorola itself: fastboot_harpia_vzw_oem_vzw_user_6.0.1_MPIS24.241-2.35-1-17_17_release-keys-cid2_vzw.tar.gz.gz
This firmware is available publicly on all known Motorola firmware sites.
@tiago ferreira:
Are you sure you have harpia verizon? and not other model/carrier?
Guys I hv a problem with my Moto g4 play
When I switched on or restart my phone automatically fastboot screen open and then manually click Power button to start the phone.
It's happens when I unlocked my bootloader.
By the way twrp recovery and other stuff is working well. So guys what should I do? Any solution for this?
Hello my xiaomi mi 8 lite is dead a while now. When connected on pc it is shown as qualcomm 9008. I think can charge it but i get only black screen. No led or backlight. It seems dead. I have reflashed it with different tools but nothing worked. I think i have to flas msimage and mprg files. Can anyone help me to identify their names and how i could get them? Thanks.
LooserD said:
Hello my xiaomi mi 8 lite is dead a while now. When connected on pc it is shown as qualcomm 9008. I think can charge it but i get only black screen. No led or backlight. It seems dead. I have reflashed it with different tools but nothing worked. I think i have to flas msimage and mprg files. Can anyone help me to identify their names and how i could get them? Thanks.
Click to expand...
Click to collapse
Hello anyone?
Is bootloader unlocked?
You can try following this guide : https://forum.xda-developers.com/mi-max-3/how-to/to-youre-stuck-edl-mode-black-screen-t3837846 it should work on the mi 8 lite
ls wolf said:
You can try following this guide : https://forum.xda-developers.com/mi-max-3/how-to/to-youre-stuck-edl-mode-black-screen-t3837846 it should work on the mi 8 lite
Click to expand...
Click to collapse
Thanks for the advice. But he uses a different phone with a different rom. Which ro m is suitable for unbricking my phone?
LooserD said:
Thanks for the advice. But he uses a different phone with a different rom. Which ro m is suitable for unbricking my phone?
Click to expand...
Click to collapse
Can anyone help please?
LooserD said:
Can anyone help please?
Click to expand...
Click to collapse
Did you solve something to put the ROM in your mobile?
I am the same, I have a nice Hard Brick, black screen, although it lights up when it is turned on, but without image. Without led ……
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The mobile is unlocked, but when I update it using MIflash Tool. I always get the same error message, "ERROR, MISSMATCHING IMAGE AND DEVICE"
I have already tried with images, China, Global, even Russian, in Fastbook format, with the same result, I think it is dead.
lopeaz said:
Did you solve something to put the ROM in your mobile?
I am the same, I have a nice Hard Brick, black screen, although it lights up when it is turned on, but without image. Without led ……
The mobile is unlocked, but when I update it using MIflash Tool. I always get the same error message, "ERROR, MISSMATCHING IMAGE AND DEVICE"
I have already tried with images, China, Global, even Russian, in Fastbook format, with the same result, I think it is dead.
Click to expand...
Click to collapse
Same here dead, black screen, not led but i can flash it with mi flasher by using the patched firehose 660. Flashing goes to 100% but the phone still dead.
http://www.mediafire.com/file/yh1qpgsb5f6o386/firehose_660-66X-636-63X.zip
But that patch is to pass the team to MI6x
You unlock the bootloader with MIUlock, and then, again to MI8lite, to be able to flash using ADB or MIflash.
Do this and you will see.
It gives me an error because of that, I have to return it to MI8lite. That is the doubt. We continue studying. If anyone knows any help ...
LooserD said:
Same here dead, black screen, not led but i can flash it with mi flasher by using the patched firehose 660. Flashing goes to 100% but the phone still dead.
http://www.mediafire.com/file/yh1qpgsb5f6o386/firehose_660-66X-636-63X.zip
Click to expand...
Click to collapse
How did u get there??? Why Is so many people having that issue?
VendettaMx said:
How did u get there??? Why Is so many people having that issue?
Click to expand...
Click to collapse
I do not know. Maybe a xiaomi protection system?
How can i check my hardware to see if cpu or gpu is dead?
LooserD said:
Hello my xiaomi mi 8 lite is dead a while now. When connected on pc it is shown as qualcomm 9008. I think can charge it but i get only black screen. No led or backlight. It seems dead. I have reflashed it with different tools but nothing worked. I think i have to flas msimage and mprg files. Can anyone help me to identify their names and how i could get them? Thanks.
Click to expand...
Click to collapse
You can follow this tutorial
https://www.youtube.com/watch?v=3QGvGgMJnhk
As of now, are there any tools or methods?
Which can unlockbootloader & install Twrp and root nokia c1 TA-1165 ?
I didn't find a method at all. There are only methods of other Nokia devices
Who can give me some suggestions?
@surathus
Road map:
1. Check for a TWRP matching your low-end phone
If found
2. Check both USB debugging and OEM unlocking are offered
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If both features are offered
3. Download & install USB-driver matching your phone from OEM's website
If installed
4. Download TWRP matching your phone
5. Unlock phone's boot-loader by means of Fastboot
6. Flash Magisk
7. Root phone by means of Magisk
8. Flash TWRP
fastboot oem unlock or fastboot flashing unlock
The suggested method, I tried it all,did not work with nokia c1
surathus said:
The suggested method, I tried it all,did not work with nokia c1
Click to expand...
Click to collapse
Last case is to flip the lock bit in SP/devcfg partition then flash it back to the device
TheExploitedOne said:
Last case is to flip the lock bit in SP/devcfg partition then flash it back to the device
Click to expand...
Click to collapse
how to the steps by steps to flip the lock bit in SP/devcfg partition
Can you guidelines me..
surathus said:
how to the steps by steps to flip the lock bit in SP/devcfg partition
Can you guidelines me..
Click to expand...
Click to collapse
I can't help via PM, but you'll need root access and if not you'll need a stock firmware and access to an EDL programmer at least one that works for your device.
TheExploitedOne said:
I can't help via PM, but you'll need root access and if not you'll need a stock firmware and access to an EDL programmer at least one that works for your device.
Click to expand...
Click to collapse
Thank you brothers
surathus said:
Thank you brothers
Click to expand...
Click to collapse
Absolutely good sir!
I meant to say can help btw
I have a bunch of programmers which may be able to work for you as well as tools to make the EDL restore tool but you'll need your firmware to restore to it
TheExploitedOne said:
Absolutely good sir!
I meant to say can help btw
I have a bunch of programmers which may be able to work for you as well as tools to make the EDL restore tool but you'll need your firmware to restore to it
Click to expand...
Click to collapse
I am new to the nokia c1 TA-1165 but I have the firmware that I just downloaded. And still don't know how to Flash and don't know which tools to use
This Stock Firmware Link
https://drive.google.com/uc?id=1RlCAlCGXvidTRoA6Zms4vaKCLb0QlXA3&export=download
surathus said:
I am new to the nokia c1 TA-1165 but I have the firmware that I just downloaded. And still don't know how to Flash and don't know which tools to use
This Stock Firmware Link
https://drive.google.com/uc?id=1RlCAlCGXvidTRoA6Zms4vaKCLb0QlXA3&export=download
Click to expand...
Click to collapse
If your able to use a homemade EDL cable (can be found on YouTube) or are able to use test points I can gladly give you a link to the tools I have
TheExploitedOne said:
If your able to use a homemade EDL cable (can be found on YouTube) or are able to use test points I can gladly give you a link to the tools I have
Click to expand...
Click to collapse
I have never used a homemade EDL cable but I think I can find it. If there are methods and Flash tools
surathus said:
I have never used a homemade EDL cable but I think I can find it. If there are methods and Flash tools
Click to expand...
Click to collapse
It's actually really easy to make with a stock Android cable ?
https://mega.nz/file/rc8CVIiB#qnM3_ZzrvCJtp_M7Y9ZftZqDtGgWeN0tqFrLlT30pws
Here's a link to all the tools you'll need. It's 240MB I size if applicable (EDL tools)
TheExploitedOne said:
It's actually really easy to make with a stock Android cable
https://mega.nz/file/rc8CVIiB#qnM3_ZzrvCJtp_M7Y9ZftZqDtGgWeN0tqFrLlT30pws
Here's a link to all the tools you'll need. It's 240MB I size if applicable (EDL tools)
Click to expand...
Click to collapse
Thank you brother
surathus said:
And what tool do I need to use Flash nokia c1 ta-1165
Please recommend
Click to expand...
Click to collapse
Everything you need is in the file I provided good sir
TheExploitedOne said:
Everything you need is in the file I provided good sir
Click to expand...
Click to collapse
Right now I have purchased an EDL cable and the product hasn't arrived yet.
But i have a problem with flash rom nokia c1 TA-1165
Because I don't know how to use Flash.Or any method Please download the firmware to see. And help to bring my method too
This Link
https://drive.google.com/uc?id=1RlCAlCGXvidTRoA6Zms4vaKCLb0QlXA3&export=download
surathus said:
Right now I have purchased an EDL cable and the product hasn't arrived yet.
But i have a problem with flash rom nokia c1 TA-1165
Because I don't know how to use Flash.Or any method Please download the firmware to see. And help to bring my method too
This Link
https://drive.google.com/uc?id=1RlCAlCGXvidTRoA6Zms4vaKCLb0QlXA3&export=download
Click to expand...
Click to collapse
Will do!
TheExploitedOne said:
Will do!
Click to expand...
Click to collapse
Thank you brothers
Hi , here's how i managed to start edl on my bricked Poco X3
- The true points are hidden by the usb map , and NOT at the place mentionned in many "putaclic" web pages.
- This place make it really harder to connect than in other know devices.
- Here is my solution :
01 remove cover ..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
now remove green screws on the top+orange screw in order to remove plastic cover and access mother board.
02 unplug power map (in red) + usb map (in green)
03 now you see test points (in green) and fakes ones (in red)
04 make a tool using aluminium or coper paper and adhesive
05 place the tool in order to contact points like this :
06 reconnect usb map
you will have to press with your favorite nail to get edl start
Thx and Credits:
@mahajant99 (XDA and telegram) for found the points
Myself for the tool and method without remove mother board
Thanks for sharing, Btw "putaclic" is a very french way to say "clickbait" haha
Xfirstname said:
Thanks for sharing, Btw "putaclic" is a very french way to say "clickbait" haha
Click to expand...
Click to collapse
?
Wow this is some scary **** when you bricked your phone. Hope i wont be included with the unlucky ones. How do we prevent from getting hard bricked. Any tips?
olujnap316 said:
Wow this is some scary **** when you bricked your phone. Hope i wont be included with the unlucky ones. How do we prevent from getting hard bricked. Any tips?
Click to expand...
Click to collapse
For my personal tips, I would avoid flashing custom ROMs and stick with the stock one until at least a stable version of recovery and ROM had been released. I had 4 devices prior to this present Poco X3 and none of them I had hard bricked. Only bootloops.
Anybody now about THE edl point for note 9 pro is? I test it from pictures om Google but it didnt work
Thank you very much for this helpful guide. I hope I do not need it. Very deceptive of people to publish false EDL points. Thanks for that tip ??
I'm curious, can the back panel be easily removed and attached again or is it glued?
Ungeskriptet said:
I'm curious, can the back panel be easily removed and attached again or is it glued?
Click to expand...
Click to collapse
Glue like Poco X2
terror_rest45 said:
For my personal tips, I would avoid flashing custom ROMs and stick with the stock one until at least a stable version of recovery and ROM had been released. I had 4 devices prior to this present Poco X3 and none of them I had hard bricked. Only bootloops.
Click to expand...
Click to collapse
Planing to buy this device.
Can u confirm the stable version of recovery and rom for this?
Ps: from India, belive flipkart had only non NFC model
vygavedha said:
Planing to buy this device.
Can u confirm the stable version of recovery and rom for this?
Ps: from India, belive flipkart had only non NFC model
Click to expand...
Click to collapse
Not yet, while there are official roms (could be stable). Recovery is a disaster, many bugs and flaw because all of them are still at Alpha version. So i think you gotta wait for another month
Speedo.thc said:
OP
Click to expand...
Click to collapse
So what do you do after that? What did you do to recover the phone? What software? What rom? Please explain more, I'm sure more people will get stuck there...
Like myself.
Don't the old xiaomi edl cable method work anymore??
Me 2 bro
Pleas help
By which software can we flash the phone in edl point mode?
So what do you do after that? What did you do to recover the phone? What software? What rom? Please explain more, I'm sure more people will get stuck there...
Like myself.
Jacccob said:
Me 2 bro
Pleas help
By which software can we flash the phone in edl point mode?
So what do you do after that? What did you do to recover the phone? What software? What rom? Please explain more, I'm sure more people will get stuck there...
Like myself.
Click to expand...
Click to collapse
My device was too much hard bricked and it didn't work after paid the flash by authorized account
Hi, i have the same problem. Phone is dead, only recognized by the Qualcomm EDL driver, but i don't know how to use their software and what files i need. Any help would be nice.
Hi,
I have a Poco X3 with a Locked Bootloader and is Bricked. Can someone please guide me on how to unbrick it or unlock the bootloader. I've tried the EDL method and it works but I don't know what to do after that. Do I keep the aluminium foil in and then flash it?, or press the power button? or something else? Any help is appreciated with steps. I don't wanna lose this phone so I hope someone can help me out. Thank you!!
By any chance do you happen to know edl points for Motorola edge 20
Would be helpful ಥ‿ಥ
Please do not ask for HMD Device Kit Login as I don't have access to it.
Please do not downgrade your phone or it will soft brick.
Phone has to be flashed in fastboot mode using HMD Device Kit.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Nokia X30 Official Flash File to be used with HMD Device Kit.
File Name: HMDSW_TA-1418_121B-0-00WW-B02_user_devicekit.zip
For the developers out there:
Please extract and modify this file so that it can be used with Qualcomm based tools like Qfil etc.
This Flash file is based on Android 12.
Google Drive Link
mvikrant97 said:
Please do not ask for HMD Device Kit Login as I don't have access to it.
Please do not downgrade your phone or it will soft brick.
Phone has to be flashed in fastboot mode using HMD Device Kit.
View attachment 5852717
Nokia X30 Official Flash File to be used with HMD Device Kit.
File Name: HMDSW_TA-1418_121B-0-00WW-B02_user_devicekit.zip
For the developers out there:
Please extract and modify this file so that it can be used with Qualcomm based tools like Qfil etc.
This Flash file is based on Android 12.
Google Drive Link
Click to expand...
Click to collapse
HMDSW_TA-1418_121B-0-00WW-B02_user_devicekit.zip
drive.google.com
Damn! don't know what to do with it TBFAQH, wish it'll make some sort of break-through eventually
Alvy123 said:
HMDSW_TA-1418_121B-0-00WW-B02_user_devicekit.zip
drive.google.com
Damn! don't know what to do with it TBFAQH, wish it'll make some sort of break-through eventually
Click to expand...
Click to collapse
Can you please elaborate your concern?
mvikrant97 said:
Can you please elaborate your concern?
Click to expand...
Click to collapse
probably about HMD Device Kit? or maybe about hoping that that ROM file will eventually give us the answer to something even bigger...
either way, I'm not the OP, so... I don't know.
AltFantasy said:
probably about HMD Device Kit? or maybe about hoping that that ROM file will eventually give us the answer to something even bigger...
either way, I'm not the OP, so... I don't know.
Click to expand...
Click to collapse
mvikrant97 said:
Can you please elaborate your concern?
Click to expand...
Click to collapse
Got it, my MTK loader wouldn't recognise the files (nor it recognises the phone once started).
Thanks for the share, but I have no use to it, nor I have an up-to-date knowledge (or tools) to test it
Alvy123 said:
Got it, my MTK loader wouldn't recognise the files (nor it recognises the phone once started).
Thanks for the share, but I have no use to it, nor I have an up-to-date knowledge (or tools) to test it
Click to expand...
Click to collapse
Your phone does not have a MTK chipset.
Is it Nokia X30 or a different phone?
Alvy123 said:
Got it, my MTK loader wouldn't recognise the files (nor it recognises the phone once started).
Thanks for the share, but I have no use to it, nor I have an up-to-date knowledge (or tools) to test it
Click to expand...
Click to collapse
And nor will it be useful if your phone is currently on a version newer than what's posted. Downgrading a locked bl device from hmd is not allowed. It will refuse to boot.
mvikrant97 said:
Your phone does not have a MTK chipset.
Is it Nokia X30 or a different phone?
Click to expand...
Click to collapse
Its x10 and correct, it doesn't recognise nothing
singhnsk said:
And nor will it be useful if your phone is currently on a version newer than what's posted. Downgrading a locked bl device from hmd is not allowed. It will refuse to boot.
Click to expand...
Click to collapse
Afraid so
ANW, past another update, in developer mode, it says, my bootloader would be unlocked
Alvy123 said:
Afraid so
ANW, past another update, in developer mode, it says, my bootloader would be unlocked
Click to expand...
Click to collapse
by the way, I've successfully rooted and unlocked my X10, go read my guide.
Also, I doubt that unlocking your X10's bootloader would be that easy...
AltFantasy said:
by the way, I've successfully rooted and unlocked my X10, go read my guide.
Also, I doubt that unlocking your X10's bootloader would be that easy...
Click to expand...
Click to collapse
It suddenly is! rebooted and it's the same.