Red diode blinks. Problem with eMMC - Xiaomi Redmi Note 3 Questions & Answers

Hi to all. I have such a problem. My Redmi note 3 Pro does not turn on. If the charger is connected, the red diode blinks. I tried via miFlash, but the error was: "init storage: fail". I think a problem with eMMC. Someone replaced eMMC? Will it come with Redmi Note 3 (MTK)?

Can fixit!

TheRoM4ik_UA said:
Hi to all. I have such a problem. My Redmi note 3 Pro does not turn on. If the charger is connected, the red diode blinks. I tried via miFlash, but the error was: "init storage: fail". I think a problem with eMMC. Someone replaced eMMC? Will it come with Redmi Note 3 (MTK)?
Click to expand...
Click to collapse
Details please
Root?
Other custom Roms ?
have you tried to connect pc? Check device manager what it shows? 9008E ?

Ya it very easy to fix forst reboot to fastboot by pressing vol- and power button
Then again reboot to edl(use edl mode)
After flash mi fastboot rom
For direct location
X "D:/kenzo rom/kenzo rom/image
Correct D: /kenzo rom/image
I. E dont use long directory
Just select one folder before image folder

Were you able to fix it?
TheRoM4ik_UA said:
Hi to all. I have such a problem. My Redmi note 3 Pro does not turn on. If the charger is connected, the red diode blinks. I tried via miFlash, but the error was: "init storage: fail". I think a problem with eMMC. Did someone replace eMMC? Will it come with Redmi Note 3 (MTK)?
Click to expand...
Click to collapse
I was cleaning some rust from under one of the shields and might have damaged the emmc. Were you able to fix it? If yes, how?

Related

Redmi Note 3 Dead

My redmi note 3 was dead. When I press power button, no response and also try to connect into the charger there also have no response, just red led light indicate. And I also try to disconnect battery cable & USB cable and connect it back but my problem still remain. device manager shows "Qualcomm HS-USB Diagnostics 900E (COM10)" every time when I connect my Redmi Note 3 into PC. Please any one can help me out........
bittu007 said:
My redmi note 3 was dead. When I press power button, no response and also try to connect into the charger there also have no response, just red led light indicate. And I also try to disconnect battery cable & USB cable and connect it back but my problem still remain. device manager shows "Qualcomm HS-USB Diagnostics 900E (COM10)" every time when I connect my Redmi Note 3 into PC. Please any one can help me out........
Click to expand...
Click to collapse
Fastboot mode working? Try to plug charger and wait 1-2 hours.
bittu007 said:
My redmi note 3 was dead. When I press power button, no response and also try to connect into the charger there also have no response, just red led light indicate. And I also try to disconnect battery cable & USB cable and connect it back but my problem still remain. device manager shows "Qualcomm HS-USB Diagnostics 900E (COM10)" every time when I connect my Redmi Note 3 into PC. Please any one can help me out........
Click to expand...
Click to collapse
Lol dude you prob messed up the rom. Go in fastboot mode and from there go to edl and flash a miui rom. Ur phone will work
bittu007 said:
My redmi note 3 was dead. When I press power button, no response and also try to connect into the charger there also have no response, just red led light indicate. And I also try to disconnect battery cable & USB cable and connect it back but my problem still remain. device manager shows "Qualcomm HS-USB Diagnostics 900E (COM10)" every time when I connect my Redmi Note 3 into PC. Please any one can help me out........
Click to expand...
Click to collapse
The simplest way is to take it to xiaomi service center. But if you have void your warrant, then try to boot into edl mode using test point method. Google it for more info.
Yes , if you u can't get to fastboot or find the device in adb you will have to do test point ............
My phone has the exact same problem, and it's not even booting into fastboot, just a flashing red light. (everything is vanilla with no root access or unlocked bootloader)
Tried this method ?
Fastboot to EDL Tool - No more Testpoint needed
Audacity4545 said:
Lol dude you prob messed up the rom. Go in fastboot mode and from there go to edl and flash a miui rom. Ur phone will work
Click to expand...
Click to collapse
But I unable to get into fastboot mode. My device was no response while I press power/vol+/vol-.
vityok3000 said:
Fastboot mode working? Try to plug charger and wait 1-2 hours.
Click to expand...
Click to collapse
I tried but it's not working...
bittu007 said:
I tried but it's not working...
Click to expand...
Click to collapse
Power off phone, hold vol up and down and plug usb cable to pc and phone. If it doesn't work use a testpoint method.
i need a dead set . is anyone willing to sell ?
When is funeral ?? :silly::silly:

Redmi Note 3 Pro Unable to Boot, But the led blinks Red when plugged in.

Recently, I bought a xiaomi redmi note 3 with the 650 version. I switch to Miui 8 China Fastboot Room from a Global Fastboot Rom, also for unlocking the bootloader. But after I have finished my flashing, it turns out that the Note 3 can't turn on, Stucking on the MI logo for 2 times then turns off again. I tried connecting it to the PC, but the led blinks red. I tried to flash the Miui again but it doesn't show the device. My PC recognized the port as Qualcomm HS-USB Diagnostics 900E, but I can't take it to EDL mode. I tried entering it from the Fastboot mode but still didn't work. Any Help?
*P.S: It also blinks red when I entered the Fastboot Mode
Just checking, but did you use the fastboot edl v2 to enter EDL?
danted7 said:
Recently, I bought a xiaomi redmi note 3 with the 650 version. I switch to Miui 8 China Fastboot Room from a Global Fastboot Rom, also for unlocking the bootloader. But after I have finished my flashing, it turns out that the Note 3 can't turn on, Stucking on the MI logo for 2 times then turns off again. I tried connecting it to the PC, but the led blinks red. I tried to flash the Miui again but it doesn't show the device. My PC recognized the port as Qualcomm HS-USB Diagnostics 900E, but I can't take it to EDL mode. I tried entering it from the Fastboot mode but still didn't work. Any Help?
*P.S: It also blinks red when I entered the Fastboot Mode
Click to expand...
Click to collapse
when i fail to unlock bootloader in official method then i tried miui8 flashboot Rom from mi flash tool with modified emmc_appsboot.mbn file from one of the developer i bricked my Redmi note 3 Qlcmm650
solution:- 1) remove back cover & disconnect the battery around 1 minute reconnect it (recomended one if this not possible for you then try 2nd method)
Or
2)full discharge the battery Then charge it more then 35% (it will also work as diconnecting the battery)
connect the computer &and press volume + & - button together
connect the PC & vol buttons press both are at the same time then you enter the correct EDL mode (same red light but this time correct EDL mode you can flash the rom use official Fastboot rom Dont modify the contents)
if i helped you hit thanks
I was in same situation today: Mobile doesnt do anything else then red-blinking, no edl or fastboot. Pc only saw "Qualcomm HS-USB Diagnostics 900E".
Found the solutions mentioned by Chinmayhegde, but i didnt get the cover off the device and dont want to damage new mobile.
then i found the method "Deep Flash".
its small manipulation of usb-cable: put a small wire on second terminal, put in pc and then pull the wire.
i succeded after second try. then pc sees "Qualcomm HS-USB QDLoader 9008" again and miflash is able to flash the device.
see this tutorial for creating the modded usb cable: http://en.miui.com/thread-310325-1-1.html
Hope it works
if your phone still able to enter fastboot, you can try to use fastboot to edl v2 to enter download mode
if it still not help, most safe & easy mode is using deep flash cable as above post
I have same problem.
Even I try booting fastboot mod but it keeps restarting.
Even fastboot logo comes by just pressing volume down button. So I think power button is stuck. That's make phone restart all the time.
How to overcome this problem?
Thanks
Sent from my SM-G900I using XDA-Developers mobile app
I fix my phone.
Open back cover and undo power cable flex and battery connctor from motherboard and put back after 1 min.
Phone started normal.
thanks
Sent from my SM-G900I using XDA-Developers mobile app
danted7 said:
Recently, I bought a xiaomi redmi note 3 with the 650 version. I switch to Miui 8 China Fastboot Room from a Global Fastboot Rom, also for unlocking the bootloader. But after I have finished my flashing, it turns out that the Note 3 can't turn on, Stucking on the MI logo for 2 times then turns off again. I tried connecting it to the PC, but the led blinks red. I tried to flash the Miui again but it doesn't show the device. My PC recognized the port as Qualcomm HS-USB Diagnostics 900E, but I can't take it to EDL mode. I tried entering it from the Fastboot mode but still didn't work. Any Help?
*P.S: It also blinks red when I entered the Fastboot Mode
Click to expand...
Click to collapse
Try To Remove Your Battery than Use MiFlash Tool To Flash Your Mobile Bro.

How to fix RN3 Pro hard bricked?

I wrongly flashed the redmi note 3 stock firmwire instead of the pro firmware,now adb,fastboot etc doesn't work.Only red LED blinks and on connecting to PC,a sound appears and shows installing driver.After installing too couldn't find my device connected even in device manager.Can anyone help?
Deep flash
https://forum.xda-developers.com/redmi-note-3/how-to/guide-how-to-flash-hard-bricked-redmi-t3490055
By saying fastboot doesn't work do you mean you can't enter it or your pc doesn't detect the phone?
Sent from Note 3, Xiaomi Redmi Note 3.

Hard-bricked Redmi 5A

Hello everyone.
After trying to flash a wrong rom (it was the Xiaomi.eu one for the Redmi 5), my Redmi 5A does not respond to anything, I cannot turn it on, enter fastboot or recovery. When I connect it to the PC, and hold volume up for 10 seconds, the device manager shows an unknown device under the USB devices. I suspect this is a hard brick problem, and I was reading that maybe an EDL cable is needed to solve this? I am quite new to hard bricks, usually only fixed soft ones, maybe anyone has any suggestions?
Thank you

note 4 flshing error

I have a mi note 4 which is bricked. It have only nothing but blank screen the red led blink while on charging i removed the back cover and shorted the points to connect it to pc in edl mode pc recognized the device and i tried to flash using mi flash and the process began and after sometimes it shows "write error" and it stopped any solution??
nikhilmulavana21 said:
I have a mi note 4 which is bricked. It have only nothing but blank screen the red led blink while on charging i removed the back cover and shorted the points to connect it to pc in edl mode pc recognized the device and i tried to flash using mi flash and the process began and after sometimes it shows "write error" and it stopped any solution??
Click to expand...
Click to collapse
If it error when the flashing process is running, for 3-4 of flashing, then i can assume if your emmc is death, because the pc can not write the system on to it and the emmc can not receive the file system. I suggest you to replace the emmc with another, bring it to customer service or if you have skill and tools, you can try it by yourself. Do not try any magical trick "how-to fix logic board without replace it" because all of those are hoax.
Its showing flashing ping via firehouse and then. "Write time out"

Categories

Resources