ZTE Blade ZMax help please? - Android Q&A, Help & Troubleshooting

So, I have said phone with MetroPCS running stock everything. The phone won't boot up in any manner. Not into Recovery or anything. No lights come on when charging, no sign of life in the device at all. The only time it has done anything different is when I had plugged it in to my PC earlier it did show up connected as "Qualcomm HS-Usb qdloader 9008."
I have no tried to root the device or flash any other firmware. Everything about the device is 100% Stock. I just so happened to pull it out of my pocket after a trip to the store and it was like this. If anyone could help, it'd be greatly appreciated.

Hold power button for a really long time

Related

[Q] LG L31L (aka F70, Access 4G LTE) Won't Turn On

Hey guys, I'm new to this site and I hope this is being posted in the correct area and I apologize if it's not.
Anyway, I have an LG Access 4G LTE StraightTalk android phone. The other day, I rooted it and everything worked fine and I was having a good time editing things and customizing. Last night, I download the Clockwork Recovery Mod app and my intention was to reboot into the CWR mode and install a zip file for a custom animation, (and yes, I know how simple it is normally, but this one required extra steps). Now, seeing as my phone is relatively new (February 2014 release) I figured I could've gotten a recovery module from a similar phone. Wrong! I'm pretty sure there was a warning that advised against it, but I didn't listen. I clicked "reboot into clockwork mode" and my phone screen went black and hasn't come back on at all. No power buttons, or combinations will work. However, when I took out my battery and plugged in my charger, it shows an empty battery with a charger plugged in and a large yellow triangle with a question mark in it. While it is in this state, if I hold the power on button or any other sequences, the screen goes black and displays the same symbol again. When I plug the battery into it, the symbol goes away, and nothing happens. Although, when I plug it into my computer with the battery inside and all, I can hear my computer making the "something is connected sound" then like 10 seconds after, "something was disconnected". You know, like when you plug and unplug a flash drive or something. It's also worth noting that I don't have an SD Card so all of my rooting and download was done onto my internal memory....... I'm boned right now. Can anybody help?
the same problem
I do some experiments with this phone to unlock
This phone realy is LG F70 D315
I stuck in Qualcom 9008
http://forum.xda-developers.com/lg-g2/help/lg-f70-d315-tracfone-download-mode-t3009244
Depending in what stage you leave it
what you see when conect to computer in the device manager?
corratge said:
I do some experiments with this phone to unlock
This phone realy is LG F70 D315
I stuck in Qualcom 9008
http://forum.xda-developers.com/lg-g2/help/lg-f70-d315-tracfone-download-mode-t3009244
Depending in what stage you leave it
what you see when conect to computer in the device manager?
Click to expand...
Click to collapse
I think you're confused. My phone won't turn on at all. The screen is black and it will not power on. I don't see anything in the device manager when it's plugged in. My laptop makes the sounds but nothing happens. And I read your post and to confirm, we both have the Straight talk LG F70, also known as the LG Access 4g LTE. So we have similar situations with the same phone.
Sorry I don't understand why you say i confused maybe my english is'nt good enought
My phone won't turn on at all even not batery image but in the device manager
I have Qualcomm, HS-USB QDLoader 9008
I break my phone because I do worst experiments and I know the consecuencies
I backup all original partitions I can give you if you find the way to restore it
this phone and all qualcom from nowdays has 2 dead modes 9008 & 9006
In this post explained
for the mode 9008 the oficial tool for all is QPST
rusian post about
If you check that nothing in the device manager you can have QHUSB 9008 mode but i cant do anything in it for the moment this mode is really hard to work it
The test point for this LG to force in 9008 go in atachment.
The only form I know to save your phone If you achived somethink like a disk with ext partitions that windows don't recognize when you conect to pc
I have the original recovery and then you flash it
I flash a custom recovery but this don't break the phone exept the recovery because
you have to unlock bootloader to do this and i did'nt
Also for a custom animation the only needed is root and is stored in /system/media/bootanimation.zip
Is there a thread for this phone anywhere?
Found one last night in a car I just bought, it is locked with PIN, no SIM card was dead so not a current phone and dude hosed me on car deal so a toy for me...
Wanted to at least get into phone to see if could get my active Tracfone SIM to use their network, phone died that it was in, if I could force my way into it somehow or figure out how to hard reset I would be in a much better place than I am now... Any other pages to look for help, or you guys know anything?
Tried the basics, power and - volume, just a reboot loop...
hey guys how i can enter recovery on my lg l31l or f70

[Q] LG L9 P768 bricked data recovery

Hi all
My first post here and I'm new to troubleshooting at this level. I've been reading around but I don't think I found a thread specific to my problem. I charged my LG L9 P768 overnight as I always do and in the morning I unplugged it and wanted to restart it. However, once it shut down it never started again. I've tried all the button combinations to no avail. There are no lights or any vibration or anything when I plug it into the wall to charge it. It was so weird. I suppose that classifies it as hard bricked? However, the battery still charges (I tested by checking the battery % on another LG L9). When I plug it into the computer, device manager recognizes a device and tries to install the OMAP4430 drivers but fails because my phone keeps connecting and disconnecting every few seconds. I have tried manually installing those drivers after reading some fastboot guide somewhere. The driver install worked but I'm not sure how to proceed from there.
The phone has never been rooted and I can't remember which version of android it's running., but it's not later than 4.1.2. Is there any way to recover the data? I have some very valuable pictures on it...sigh
Thank you
LTZonda said:
Hi all
My first post here and I'm new to troubleshooting at this level. I've been reading around but I don't think I found a thread specific to my problem. I charged my LG L9 P768 overnight as I always do and in the morning I unplugged it and wanted to restart it. However, once it shut down it never started again. I've tried all the button combinations to no avail. There are no lights or any vibration or anything when I plug it into the wall to charge it. It was so weird. I suppose that classifies it as hard bricked? However, the battery still charges (I tested by checking the battery % on another LG L9). When I plug it into the computer, device manager recognizes a device and tries to install the OMAP4430 drivers but fails because my phone keeps connecting and disconnecting every few seconds. I have tried manually installing those drivers after reading some fastboot guide somewhere. The driver install worked but I'm not sure how to proceed from there.
The phone has never been rooted and I can't remember which version of android it's running., but it's not later than 4.1.2. Is there any way to recover the data? I have some very valuable pictures on it...sigh
Thank you
Click to expand...
Click to collapse
Can it go to S/W Mode? (Vol - while connecting to usb)

LG-T385 flash stock/unbrick help

can anyone help with unbricking lg-t385? friend gave me the phone saying it just turned itself off and after that it doesnt work (as always, nobody touched anything :/ )
when turned on it hangs at LG logo, if i remove the battery and connect it to pc the same happens although by the plugged in sound on the pc you can tell that the phone is connected, it even shows up in device manager. if you remove the battery and plug in a wall ac charger the same happens, phone turns on and hangs at the logo. tried pressing all the combination of keys to get to recovery or hard reset. nothing works.
flashing, rooting, unbricking etc is not new to me, but this is my first lg and first non android phone for that matter.
tried flashing with LG Mobile Support Tool without luck cause it doesnt recognize the phone.
can someone please help, or just point me in the right direction as to how to reset it to factory or flash stock?
thanks in advance
nobody?

Zte v9a bricked

MPRG8255.hex and 8255_msimage.mbn where can i get the files? my zte v9a is bricked. cant power up. its qualcomm hsusb qdloader 9008. ... the battery died, it never came on again. i dont even understand what really happened. but that what happened. the battery was low the time i was downloading some .apks to install on my blackberry version 10. i hope now u understand what i mean. it cant power up.

Bricked and weird issue

Hi, i use the latest CM ROM for K910 for a quite long time. yesterday i dropped my phone and it crack my screen. was sending it for repair and now the phone wont load normally and it stays in CM loading screen and never boot up. With the cracked phone i use it for a day and sent it to the local shops to replace it.
so i managed to boot it into fastboot but sadly i cant do anything due to the bootloader is locked. all i can do is to unbrick it using the qualcomm resets which requires me to made some pin grounding and plug in the usb which allow me to use QFIL.exe to reset the phone into the very stock rom like in the factory.
after the reset it was working as it should but something is not right, the phone cant be used with its touchscreen, wont charge when it sleep and when ever the phone start to get dark when theres no input, it will stop charging and the screen wont turn on again. both when i boot the phone and when i turn off the phone and charge it. im not sure how to troubleshooting as i never encounter in my experiences. also, it will drain my battery. if i plug in my pc it will detect as Qualcomm HS-USB Diagnostics 9006 or Marshall London HS-USB Diagnostics 9006
anyone have solution for this or any idea?
Thanks in advance
AyieStyx said:
Hi, i use the latest CM ROM for K910 for a quite long time. yesterday i dropped my phone and it crack my screen. was sending it for repair and now the phone wont load normally and it stays in CM loading screen and never boot up. With the cracked phone i use it for a day and sent it to the local shops to replace it.
so i managed to boot it into fastboot but sadly i cant do anything due to the bootloader is locked. all i can do is to unbrick it using the qualcomm resets which requires me to made some pin grounding and plug in the usb which allow me to use QFIL.exe to reset the phone into the very stock rom like in the factory.
after the reset it was working as it should but something is not right, the phone cant be used with its touchscreen, wont charge when it sleep and when ever the phone start to get dark when theres no input, it will stop charging and the screen wont turn on again. both when i boot the phone and when i turn off the phone and charge it. im not sure how to troubleshooting as i never encounter in my experiences. also, it will drain my battery. if i plug in my pc it will detect as Qualcomm HS-USB Diagnostics 9006 or Marshall London HS-USB Diagnostics 9006
anyone have solution for this or any idea?
Thanks in advance
Click to expand...
Click to collapse
It shows HS-USB Diagnostics 9006 for you ! So do as I say :
1 . Turn off phone
2. press and hold vol up + vold down
3. connect to usb without powering up
4. You gets what you want !

Categories

Resources