MPRG8255.hex and 8255_msimage.mbn where can i get the files? my zte v9a is bricked. cant power up. its qualcomm hsusb qdloader 9008. ... the battery died, it never came on again. i dont even understand what really happened. but that what happened. the battery was low the time i was downloading some .apks to install on my blackberry version 10. i hope now u understand what i mean. it cant power up.
Related
Hello,
i searched a lot of unbrick a HTC Desire X but nothing helps.
The phone was ok the last times, i charged it normaly over the night, in the morning i take my phone and see black screen oO. The Red/organe LED is still on. So ok powerd on, nothing happens .................
I think its bricked, but i dont now why. So ok, i thing i had successfully recoverd more times my LG, so i can recover the Desire too.
No, i can´t ....
I connected the phone via USB to the PC, i onbly found a Qualcomm HS_USB QDLOADER 9008 COM 5.
Driver installed, QPST downloaded.
So the Programm told me the Phone is now in Downloadmode.
and i see Phone Q/QCP-xxx(Download)
I think i need a new bootloader, so i searched but i need it in HEX Format or anything else.
Can anyone help me, so fast you can .....
MasterTobi said:
Hello,
i searched a lot of unbrick a HTC Desire X but nothing helps.
The phone was ok the last times, i charged it normaly over the night, in the morning i take my phone and see black screen oO. The Red/organe LED is still on. So ok powerd on, nothing happens .................
I think its bricked, but i dont now why. So ok, i thing i had successfully recoverd more times my LG, so i can recover the Desire too.
No, i can´t ....
I connected the phone via USB to the PC, i onbly found a Qualcomm HS_USB QDLOADER 9008 COM 5.
Driver installed, QPST downloaded.
So the Programm told me the Phone is now in Downloadmode.
and i see Phone Q/QCP-xxx(Download)
I think i need a new bootloader, so i searched but i need it in HEX Format or anything else.
Can anyone help me, so fast you can .....
Click to expand...
Click to collapse
Did you try to pull battery? Just pull battery, wait for the orange LED to go off and and put it back in, then boot normally. Should work.
dansou901 said:
Did you try to pull battery? Just pull battery, wait for the orange LED to go off and and put it back in, then boot normally. Should work.
Click to expand...
Click to collapse
still the same, nothing boots
MasterTobi said:
still the same, nothing boots
Click to expand...
Click to collapse
I'm afraid it's classified as paperweight then... The only option is to repair via RIFF Jtag Box...
MasterTobi said:
still the same, nothing boots
Click to expand...
Click to collapse
You just charged without doing anything before it went to charged?
Try to leave the phone for a couple hours and try again, I think the battery overheated
If that doesn't work than it's paperweighted
Hey guys, I'm new to this site and I hope this is being posted in the correct area and I apologize if it's not.
Anyway, I have an LG Access 4G LTE StraightTalk android phone. The other day, I rooted it and everything worked fine and I was having a good time editing things and customizing. Last night, I download the Clockwork Recovery Mod app and my intention was to reboot into the CWR mode and install a zip file for a custom animation, (and yes, I know how simple it is normally, but this one required extra steps). Now, seeing as my phone is relatively new (February 2014 release) I figured I could've gotten a recovery module from a similar phone. Wrong! I'm pretty sure there was a warning that advised against it, but I didn't listen. I clicked "reboot into clockwork mode" and my phone screen went black and hasn't come back on at all. No power buttons, or combinations will work. However, when I took out my battery and plugged in my charger, it shows an empty battery with a charger plugged in and a large yellow triangle with a question mark in it. While it is in this state, if I hold the power on button or any other sequences, the screen goes black and displays the same symbol again. When I plug the battery into it, the symbol goes away, and nothing happens. Although, when I plug it into my computer with the battery inside and all, I can hear my computer making the "something is connected sound" then like 10 seconds after, "something was disconnected". You know, like when you plug and unplug a flash drive or something. It's also worth noting that I don't have an SD Card so all of my rooting and download was done onto my internal memory....... I'm boned right now. Can anybody help?
the same problem
I do some experiments with this phone to unlock
This phone realy is LG F70 D315
I stuck in Qualcom 9008
http://forum.xda-developers.com/lg-g2/help/lg-f70-d315-tracfone-download-mode-t3009244
Depending in what stage you leave it
what you see when conect to computer in the device manager?
corratge said:
I do some experiments with this phone to unlock
This phone realy is LG F70 D315
I stuck in Qualcom 9008
http://forum.xda-developers.com/lg-g2/help/lg-f70-d315-tracfone-download-mode-t3009244
Depending in what stage you leave it
what you see when conect to computer in the device manager?
Click to expand...
Click to collapse
I think you're confused. My phone won't turn on at all. The screen is black and it will not power on. I don't see anything in the device manager when it's plugged in. My laptop makes the sounds but nothing happens. And I read your post and to confirm, we both have the Straight talk LG F70, also known as the LG Access 4g LTE. So we have similar situations with the same phone.
Sorry I don't understand why you say i confused maybe my english is'nt good enought
My phone won't turn on at all even not batery image but in the device manager
I have Qualcomm, HS-USB QDLoader 9008
I break my phone because I do worst experiments and I know the consecuencies
I backup all original partitions I can give you if you find the way to restore it
this phone and all qualcom from nowdays has 2 dead modes 9008 & 9006
In this post explained
for the mode 9008 the oficial tool for all is QPST
rusian post about
If you check that nothing in the device manager you can have QHUSB 9008 mode but i cant do anything in it for the moment this mode is really hard to work it
The test point for this LG to force in 9008 go in atachment.
The only form I know to save your phone If you achived somethink like a disk with ext partitions that windows don't recognize when you conect to pc
I have the original recovery and then you flash it
I flash a custom recovery but this don't break the phone exept the recovery because
you have to unlock bootloader to do this and i did'nt
Also for a custom animation the only needed is root and is stored in /system/media/bootanimation.zip
Is there a thread for this phone anywhere?
Found one last night in a car I just bought, it is locked with PIN, no SIM card was dead so not a current phone and dude hosed me on car deal so a toy for me...
Wanted to at least get into phone to see if could get my active Tracfone SIM to use their network, phone died that it was in, if I could force my way into it somehow or figure out how to hard reset I would be in a much better place than I am now... Any other pages to look for help, or you guys know anything?
Tried the basics, power and - volume, just a reboot loop...
hey guys how i can enter recovery on my lg l31l or f70
hi every body
i have lenovo s60-a Mobile i just upgrade it to Android 5.0 from Android 4.4.4 by the way of update.zip from internal sd and so when i turn on it it show only lenovo logo for 2 3 second and then turn off with long vibration i have try many time to load the boot menu with all combination of power and volume button
but it turn off in the same way not loading recovery menu so what i can doo.
is there a way to install the all the boot menu on mobile
or how can i fix it.
Quote:
Originally Posted by FluXx95
Hello everyone.
I just got back from my holyday and searched everywhere, but couldn't find anything, so you guys are my last chance.
So my Lenovo S60a ran out of battery and when I got to the hotel and plugged it in to power, it got stuck at the LENOVO boot logo. After a few hours and several reboots, if finally "woke up", but I found out that it had no baseband and everything was missing... Like a factory reset. Since the phone still has warranty, I called my local Lenovo authorized service, explained them the problem and they told me to upgrade from 4.4.4 to 5.0.2 OTA, so the new baseband will flash over the unknows/unexistent one. I started the update and it got stuck at 75% for 15 minutes or so, then it shut down with a long vibration and that was it, like it's last breath.
I plugged it into QFIL and instead of Quallcom HS-USB QDloader 9008/9006, it appears as Marshall London HS-USB Diagnostics 9006.
I don't really want to get it to the service like my last phone, just to wait 2 weeks, call them and get the answer "We can't do anything, it's dead".
If it's just a problem that requires even a harder method of flashing, I am willing to try it.
Looking forward for help, apreciating any answer/oppinion and thank you in advance.
Hi try this if you didn't , before flashing Disable Driver Signature , you have videos on YT if you don't know how to do!
Downlad this firmware: Password : lenovo4
http://www.mediafire.com/file/v4lryqut16lom9f/Lenovo+S60-a+100%+tested+QPST+file.rar
QPST 2.7.422
http://www.mediafire.com/file/j4gcz64qjm63m86/QPST_2.7.422.rar
Qualcomm USB driver
http://www.mediafire.com/file/e4jz2a4g8lrjfmv/Qualcomm+USB+Drivers.rar
Instruction to flash
Extract the rom.
Open Qfil flasher.
Specify the file in Programmer Path the file will be prog_emmc_firehose_8916.mbn
Now in Load XML specify raw_program_unparse and patch file.
Now click select port and power off your mobile. Volume + and Volume – and then connect usb cable.
Selected port will show like relink HS-USB QD Loader 9008.
Now Press Download Button. After Flash Mobile Phone will be restart.
Credits for file : http://miraclesoftsolution.com
Good Luck
So, I have said phone with MetroPCS running stock everything. The phone won't boot up in any manner. Not into Recovery or anything. No lights come on when charging, no sign of life in the device at all. The only time it has done anything different is when I had plugged it in to my PC earlier it did show up connected as "Qualcomm HS-Usb qdloader 9008."
I have no tried to root the device or flash any other firmware. Everything about the device is 100% Stock. I just so happened to pull it out of my pocket after a trip to the store and it was like this. If anyone could help, it'd be greatly appreciated.
Hold power button for a really long time
Hello everyone, got this bricked phone with asus logo stuck, tried to unbrick with qfil and stock firmware, and i was getting errors, one of them is finished sector adress ****, and i cant get out from edl mode with holding buttons, none of them reboot it, only power button can restart edl mode if i hold it for 30+ secs, led indicator, screen, nothing work, with removed battery still recognizes as Hs usb ....... 9008, what can i do to exit edl mode?, and how can i flash an rom? P.S phone was in water about year ago.
(Sorry for my english):crying:
P.S.S before stuck, when i was getting to fastboot, flash tool was telling me that my phone is -1% battery