Dear All,
all of a sudden, my Samsung Galaxy S6 Edge (SM-G925F) turned off yesterday and I haven't managed to turn it on since that. I've tried all of the button combinations (safe mode, recovery mode etc.) that most websites advise as solutions but my phone is still nothing more than an expensive brick.
I downloaded Odin, installed the Samsung drivers but when I connected my phone via USB there was not even a sound notification of my Windows PC which would notify me about a connected device. (Though I had never connected it to my PC before it turned off yesterday.)
The only visible effect I achieved (after pressing and holding a button combination I can't remember) is the blue notification LED which has been constantly shining since that.
What shall I do?
I'm begging you for any help.
Thanks,
Dave
divadylarik said:
Dear All,
all of a sudden, my Samsung Galaxy S6 Edge (SM-G925F) turned off yesterday and I haven't managed to turn it on since that. I've tried all of the button combinations (safe mode, recovery mode etc.) that most websites advise as solutions but my phone is still nothing more than an expensive brick.
I downloaded Odin, installed the Samsung drivers but when I connected my phone via USB there was not even a sound notification of my Windows PC which would notify me about a connected device. (Though I had never connected it to my PC before it turned off yesterday.)
The only visible effect I achieved (after pressing and holding a button combination I can't remember) is the blue notification LED which has been constantly shining since that.
What shall I do?
I'm begging you for any help.
Thanks,
Dave
Click to expand...
Click to collapse
Any luck with this?
Related
Hi there,
I bought this MiPad about 4 months ago and it was all working properly till yesterday. And all of a sudden, I saw the fast boot screen showing up on the screen. I was clueless as why that screen was showing up without me doing anything. I didn't know what to do and pressed power button (maybe that was the mistake I did). Now the device is turned off and not turning on at all. I tried many ways to turn it on, but failed till now. I have tried -
- Holding the Power button for quite a while.
- Holding a combination of Volume buttons and Power button.
- Charging it overnight and trying the above two steps. (though connected to the charger, no notification lights showed up)
- When searching for solutions, came across this thread in some forum. Tried this as well, but no results. (http://forum.xda-developers.com/ ... ve-totally-t3417604)
When I connect and disconnect the device to my laptop through USB cable, I can hear the Windows beep sound, but does not detect it (I mean, it won't be displayed in either MiFlash, MiPCSuite tools or in the Windows file explorer).
If anybody has a solution for this, please help. Thanks.
Hello everyone.
I was on holiday and over the night my phone went dead without being able to turn it on again.
BUT: i see the battery loading screen when i charge it. so it is like the power button does not work or something similar.
Is it somehow possible to rescue the photos i took?
thank you in advanced for ANY advice.
regards
I havent tested it but found this a video which I can't link to because I'm new....
It says hold the volume up key and plug in usb. Then the phone aks you if you want to go into download mode or restart and turn on.
Hello everyone,
i got a problem with my z ultra and have tried looking similar problem on this forum but none of the solution seems working.
Please note that i have a stock phone, never did anything to it including unlocking rooting etc as i have no idea what it is, just casual usage.
So the problem occured when i tried to move an apps from sd card to my internal storage, and then my phone freezed midways,
the phone went unresponsive just showing the freezing screen.
Then i pushed the red button near the sim tray hoping the phone will reboot as i had similar problem before, and thought that it was just another minor problem and it worked.
But this time after pushing the red button the phone wont reboot again after i try to turn it on again using the power button, only a vibration but the screen showed no display whatsoever.
Ive been looking a solution on this forum with similar problem and there was a suggestion to connect the phone to power source and push the power and + vol together but there was only vibration thrice without indication of my problem has been solved.
Ive also tried a solution on youtube to disconnect the power cable, charge it to power source, wait for the Red LED to blink and reconnect the power cable again but it wasnt working.
Long story short after trying several method now my phone only blinking Red LED 3 times when i tried to turn it on, i tried to charge it to full but the Red LED keeps showing on even after i discharged it, so i had to push the power and + vol button to turn it off.
I suspect that my phone is hardbricked looking at the symptomps
Please anybody here could help me to fix it?
It's probably not hard-bricked.
Try this,
1, connect your USB cable to PC (without phone connected to it )
2, press volume up button and then plug in the usb cable to your phone
3, if light goes blue colour then you are back in business and you can still revive your phone
step 3 if successfull means your phone is up with fastboot mode and you can upload a recovery via flashtool
let me know your results ,
rgds
Hello,
I have an old Samsung Galaxy S6 Edge (AT&T: SM-G925A) that's having strange problems.
It will not turn on at all when it is unplugged from the wall. When it does turn on, it shuts off after a while and resets. The battery has been replaced but the issue hasn't gone away.
I can manage to get the phone to boot in Download Mode while it's connected to my computer, but it doesn't get recognized by Kies or Smart Switch (it DOES get recognized by Odin, though). I've also managed to turn on USB Debugging, if that helps any.
Getting it functional again really isn't a top priority. I mainly want to retrieve the data off of the phone. Is it possible?
Hi! I'd like some help.
I have a Samsung Galaxy S10e (SM-G970F).
The power button is faulty, I got it back from service yesterday, unfortunately it was not repaired because the device is rooted.
Before I handed it in for service, I was able to turn it on without the power button (download mode -> restart), but now the download mode is not available either.
And it doesn't indicate charging either, the display is completely black at all times.
Yesterday the computer recognized it as a drive, but it showed only one TWRP folder. Today, unfortunately, the computer does not even recognize it, nothing happens when the usb cable is connected.
Is it possible that the device has remained in some service mode?
Somehow I would have to reboot or get into download mode, I just don’t know how..
So now:
The display is completely dark.
It does not respond to buttons.
The power button is broken.
It does not indicate charging.
The download mode does not start. (volmune down + bixby button & connect usb data cable -> nothing happens.)
The computer does not indicate a usb connection.
The adb doesn't see either: error '(null)' not found.
What can I do?
To me it seems phone's boot-loader is broken: a working boot-loader would start Android's "init" process what automatically starts ADB on phone, if USB-debugging got enabled on phone, what in turn would make the phone accessable via USB.
jwoegerbauer said:
To me it seems phone's boot-loader is broken: a working boot-loader would start Android's "init" process what automatically starts ADB on phone, if USB-debugging got enabled on phone, what in turn would make the phone accessable via USB.
Click to expand...
Click to collapse
Thanks for the reply.
However, I have new news about the device.
I realized that the device itself works, only the display is always dark.
I disassembled, unplugged the battery from the motherboard, and switched back to download mode and Odin recognized it.
I managed to update the software on it, the device restarted fine, only the display is completely dark.
The computer already recognizes it, I can give a command via adb, and I can hear the volume button when pressed.
The only problem is that there is no picture on the display.
I reconnected the display connector to the motherboard, but that wasn't the problem.
When the power is off, the display does not indicate that the charger is connected.
Does anyone have any idea what else I can do?
Mr. BonG said:
Thanks for the reply.
However, I have new news about the device.
I realized that the device itself works, only the display is always dark.
I disassembled, unplugged the battery from the motherboard, and switched back to download mode and Odin recognized it.
I managed to update the software on it, the device restarted fine, only the display is completely dark.
The computer already recognizes it, I can give a command via adb, and I can hear the volume button when pressed.
The only problem is that there is no picture on the display.
I reconnected the display connector to the motherboard, but that wasn't the problem.
When the power is off, the display does not indicate that the charger is connected.
Does anyone have any idea what else I can do?
Click to expand...
Click to collapse
Your hardware is faulty, replace the screen.
Sent from my SM-S767VL using Tapatalk