This is an update to Android 7.1.2 Nougat for the Pendoo T95Z Plus Android TV Box.
*This is for the 2Gb/16Gb version. It will Brick the 3Gb/32Gb! Use only for 2Gb/16Gb.
You will need to research the update proceedure to get it flashed into your box. Looks like there are two ways to do the update, 1, Use amlogic usb burning tool with a special usb cable, or 2, use a micro sd card to flash.
Warning: The Pendoo T95Z Plus has a different WiFi chip than the Sunvell, or other manufacturers of the T95Z boxes.
This worked for my Pendoo box with the "Fn-Link" WiFi chip. Posting here to help others out, as this update is almost impossible to find.
This came from Pendoo Customer Support as a link to download. Here is a link to the .zip file.
Do NOT flash this for anything but the Pendoo variant.
Go to: https://www.needrom.com/category/others/etc/
I think you will have to create an account, and log in, but it's not too bad.
Title of the rom is: Pendoo T95Z Plus (2Gb/16Gb) Android 7.1.2 Nougat Update Rom
TECHADDICT-5610 said:
This is an update to Android 7.1.2 Nougat for the Pendoo T95Z Plus Android TV Box.
*This is for the 2Gb/16Gb version. It will Brick the 3Gb/32Gb! Use only for 2Gb/16Gb.
You will need to research the update proceedure to get it flashed into your box. Looks like there are two ways to do the update, 1, Use amlogic usb burning tool with a special usb cable, or 2, use a micro sd card to flash.
Warning: The Pendoo T95Z Plus has a different WiFi chip than the Sunvell, or other manufacturers of the T95Z boxes.
This worked for my Pendoo box with the "Fn-Link" WiFi chip. Posting here to help others out, as this update is almost impossible to find.
This came from Pendoo Customer Support as a link to download. Here is a link to the .zip file.
Do NOT flash this for anything but the Pendoo variant.
Go to: https://www.needrom.com/category/others/etc/
I think you will have to create an account, and log in, but it's not too bad.
Title of the rom is: Pendoo T95Z Plus (2Gb/16Gb) Android 7.1.2 Nougat Update Rom
Click to expand...
Click to collapse
Is it 7.1.2 or 7.1.1?
Some firmwares claim to be 7.1.2 but after flashing and on build.prop are 7.1.1, also not that hard to port, specs are the same other than the wifi chip so should be extremely easy
It shows as version 7.1.2 in my settings on the box. I was actually surprised to get a reply from Pendoo with the link. Maybe the Chinese manufacturers are realizing that supporting their products is good for business.
Hello, thanks for information. I installed the rom in my Sunvell t95z plus 9377 wifi chip and everything works very well the wifi connects in 2.4 and 5 gh, I only have the problem to install TWRP I have tried some but I can not install it, Any help?
Thank you very much
Thank you so much! Created an account just to let anyone else that stumbles across this know that it works on my T95ZPlus (2/16) with 9377 (LTM8830 on the circuit board) wifi chip. I know what a pig it can be to find firmware for correct wifi/bluetooth/infrared but this went on with no problems and everything works! I now have 7.1.2!
Thanks a million :highfive:
hey man you know anyway to identifiy what variant you have i have a box but came in a blank box from ebay know clue who mage it as they all look the same
stevegtrlmk said:
hey man you know anyway to identifiy what variant you have i have a box but came in a blank box from ebay know clue who mage it as they all look the same
Click to expand...
Click to collapse
Only way to know is to open the box up. I guess you should know the RAM/ROM sizes from when you bought it...
jjclements said:
Only way to know is to open the box up. I guess you should know the RAM/ROM sizes from when you bought it...
Click to expand...
Click to collapse
It's the 2gb 16 gb model I been trying to get it to update with any of the softwares at this stage but won't update from SD card says SD card read only when it aint. Bought alot of Android boxes this one is by far the worst I have seen it absolutely shocking how sketchy os is
Hello
I have T95Z Plus 2/16 (s912) Android Box
Original FW was Android 6.0.1, but I was receiving new FW from factory (WeChip) - Android 7.1.2
With this FW I have problem with "OK" button with remote controller for my LG TV. When I pressing "OK" on LG remote controller TV Box made "UP"+"OK". All option in HDMI CEC is on.
With original remote controller from TV Box no problem.
What and where I should change for solving this problem?
P.S. Now I was closing IR receiver sensor on my TV Box.
TECHADDICT-5610 said:
Esta es una actualización de Android 7.1.2 Nougat para el Pendoo T95Z Plus Android TV Box.
*Esto es para la versión de 2Gb/16Gb. ¡Bloqueará los 3Gb / 32Gb! Utilícelo solo para 2Gb/16Gb.
Deberá investigar el procedimiento de actualización para que aparezca en su caja. Parece que hay dos formas de hacer la actualización, 1, use la herramienta de grabación usb amlogic con un cable usb especial, o 2, use una tarjeta micro sd para flashear.
Advertencia: El Pendoo T95Z Plus tiene un chip WiFi diferente al Sunvell, u otros fabricantes de las cajas T95Z.
Esto funcionó para mi caja Pendoo con el chip WiFi "Fn-Link". Publicar aquí para ayudar a otros, ya que esta actualización es casi imposible de encontrar.
Esto vino de Pendoo Customer Support como un enlace para descargar. Aquí hay un enlace al archivo .zip.
NO flashee esto para nada más que la variante Pendoo.
Ir a: https://www.needrom.com/category/others/etc/
Creo que tendrás que crear una cuenta e iniciar sesión, pero no es tan malo.
El título de la rom es: Pendoo T95Z Plus (2Gb/16Gb) Android 7.1.2 Nougat Update RomholhHol
Click to expand...
Click to collapse
Related
Hi,
I don't know if this question goes here, please introduce me to that forum; I'm really new here so I apologize for any bad spelling or inconvenience. Well straight to business, I bought a tablet (wich I think is generic, as I can't find much information about personalization, as rooting) named Philco tb-ph3, I'm from Argentina btw. But I wanted to root it and/or change the android (wich is 4.2.2).
Some specs are (from cpu-z):
model: Philco tb-ph3
android version Jelly bean 4.2.2
cpu architecture: arm Cortex-A9
kernel architecture: armv7l
kernel version: 3.0.36+ (eng.zed.20130903.194648)
hardware: rk30board
ram: 1 GB
bootloader: Don't know
My question is basically if there is a way to root and/or there is a custom rom somewhere for that tablet. I'm aware that there won't be a custom rom for my tablet specifically, but I know that some roms can fit in various devices, maybe one of them could work for me.
In the worse case that I do something wrong it would be awesome to know someway to make a backup for the entire rom not just the apps, just in case.
thanks in advance for anything.
PS: I've searched in google and here in xda, but can't find anything.
Hola pudiste rotear?
Estoy igual
dvh915 said:
Hola pudiste rotear?
Click to expand...
Click to collapse
Pudieron encontrar alguna forma para rootear la tablet?? la mia es una Philco TP8A1I, pero sigo sin encontrar ni archivos para rootear con odin y con ninguna app funciona
Hi guys,
I would like to know the best way for rooting my tablet Polaroïd MID 9748 with Android 4.2.2 kernel 3.0.36.
My objectif is to install a soft which put the data on the external sd card :
http://forum.xda-developers.com/showthread.php?t=2192122&nocache=1
Tanks for jour help
Ok I respond to myself .... aleast there is one interessted :victory:
Ifound the solution here.... My error was I searched with the device name but it's better to search with the CPU name as RK3188
So I found this working procedure here :
http://hwswbits.blogspot.fr/2013/09/root-rockchip-stickstablets-from-linux.html
May Help.....
Thanks for the infos,
I'm looking for the same, but from Windows 7
I just got the Polaroid MID9748 yesterday (120$), extremly interesting performance/price ratio !
I don't use Win7 but I can recommend you these points :
- Check if the CPU name are the same?
- You need to install the usb driver on you PC first according you CPU name: http://www.rockchip.nl/downloads/
- Install adb : http://www.xda-developers.com/android/adb-easy-tutorial/
- Download the TPSarky-Von-Droid-Root.rar
There is a bat file inside with the command, according Linux world is like script.sh file in the blog in my second post, open it check if there lot difference. If you're not sure don't launch it. Read carefully this post http://forum.xda-developers.com/showthread.php?t=1526487 where TPSarky-Von-Droid-Root package is from.
In hoping to help.....
hi,
thanks my Polaroid MID9748 RK3188 is root
now, how to install a new firmware / custom rom / 4.3?
and how save the original rom ?
i have ploblem with bluetooth GPS and with waze (can't install via playstore)
thanks
f1ioi said:
hi,
thanks my Polaroid MID9748 RK3188 is root
now, how to install a new firmware / custom rom / 4.3?
and how save the original rom ?
i have ploblem with bluetooth GPS and with waze (can't install via playstore)
thanks
Click to expand...
Click to collapse
I didn't go until this point as I bricked my Iconia :silly:. May be you've to open a new post, specialy for GPS question....
Answer in Spanish
f1ioi said:
hi,
thanks my Polaroid MID9748 RK3188 is root
now, how to install a new firmware / custom rom / 4.3?
and how save the original rom ?
i have ploblem with bluetooth GPS and with waze (can't install via playstore)
thanks
Click to expand...
Click to collapse
Hi!
Respuesta en español :
Tu debes:
-Descargar la App Arctools (xxxx = mega) https xxxx .co. nz /#!gUpkjQTA!LWJCbE7fuH8UBDAI6237s1ZQuAU0PN-WeGrkFYLLwwk
-A través de esa App tienes que descargar e instalar CWM en la pestaña Apps
-Luego de instalar CWM, tienes que hacer Reboot Recovery, en la pestaña Reboot
-Luego, dentro de CWM, con la pantalla táctil, ir a Backup and Restore
-Si tienes una microSD (requerido para este paso) elegir la opción Backup to external_sd
-Esperar algunos minutos y voila!
Aquí hay un backup (créditos a blackfox69):
https xxxx .co.nz /#!K9p0kS6I!7a_BZSRKlSlpmySpLvWAeXRux4YofLHqoZ_IuYNI5Nk
Espero que te sirva y les sirva a todos los que tenemos esta tablet!
Espero que algún cocinero pueda cocinar una Custom Rom.
PD: Hay una Custom ROM de una Tablet marca Visture V97HD, que instale en esta Tablet, pero no me funcionaba el táctil, ni las cámaras y ni los sensores, pero el sistema andaba fluido. Espero que se pueda hacer algo combinando las dos.
Espero que me entiendan! :fingers-crossed:
hi
does someone still have the blackfox69 backup?
it's no more online and i would need it
thanks
okay so i picked up this tablet at a pawnshop for $10, doesnt boot, but will go into recovery. I downloaded the firmware from the proscan website but it wont install it from recovery(says rkimage update failed) with the image file that was in the firmware download, the zip file wont install either. I cant get my pc to detect it without popping up usb device not detected ****, and it will detect it and install an mtp device while its stuck in a bootloop, any ideas or help with this would be awesome?
Also when i took it apart i saw that the chip in it was a RockChip rk3128 which i found is mostly quad core chip but the tablet specs say its a dual core?
hola amigo podrias pasarme el firmware que bajastes de la pagina de proscan. gacias [email protected]
hi, my frien can you give me the firmware that you download from proscan web site. thanks [email protected]
bohorbaej said:
hola amigo podrias pasarme el firmware que bajastes de la pagina de proscan. gacias [email protected]
hi, my frien can you give me the firmware that you download from proscan web site. thanks [email protected]
Click to expand...
Click to collapse
hola amigo conseguiste el firmware porfavor lo necesito si tienes el link gracias
Hola estaba root el Telefono cuando salta un error en el pc y en el telefono el cual el telefono se "reinicia" pero sale un mensaje en rojo en la parte superior izquierda de la pantalla que dice "Only official released binaries are al lowed to be flashed" en lo cual dije bueno tendre que Flashear el dispositivo nuevamente en eso cuando flasheo con Odin me salta el error en el telefono de "sw rev check fail(CM) device 6 binary 3" en el cual quedo en duda que hacer. Nose como hacerlo arreglarlo porfavor ayuda!!! Tengo un Samsung Galaxy A7
Hi, the phone was rooted when an error occurred on the PC and on the phone, the phone "reboots" but a message appears in red on the upper left of the screen that says "Only official released binaries are at lowed to be flashed "in which I said good I'll have to flash the device again in that when I flash with Odin I jump the error in the phone" sw rev check fail (CM) device 6 binary 3 "in which I doubt what to do. I do not know how to fix it please help! I have a Samsung Galaxy A7
Sorry for my English I do not know much the language.
Panchoso said:
Hola estaba root el Telefono cuando salta un error en el pc y en el telefono el cual el telefono se "reinicia" pero sale un mensaje en rojo en la parte superior izquierda de la pantalla que dice "Only official released binaries are al lowed to be flashed" en lo cual dije bueno tendre que Flashear el dispositivo nuevamente en eso cuando flasheo con Odin me salta el error en el telefono de "sw rev check fail(CM) device 6 binary 3" en el cual quedo en duda que hacer. Nose como hacerlo arreglarlo porfavor ayuda!!! Tengo un Samsung Galaxy A7
Click to expand...
Click to collapse
Hi , this forum is for English language so anyone can understand , if you look for help write on English or use some online translate .
To fix your problem you can try one of the following :
1. Download latest firmware for your device and region :
https://updato.com/firmware-archive-select-model/?exact=1&q=SM-A605G
2. Use 4 file repair firmware including .pit file or extract just 4 files from stock firmware.
You can search over the internet for 4 files repair firmware for your device or how to extract ...
Good luck.
Teddy Lo said:
Hi , this forum is for English language so anyone can understand , if you look for help write on English or use some online translate .
To fix your problem you can try one of the following :
1. Download latest firmware for your device and region :
updato.com/firmware-archive-select-model/?exact=1&q=SM-A605G
2. Use 4 file repair firmware including .pit file or extract just 4 files from stock firmware.
You can search over the internet for 4 files repair firmware for your device or how to extract ...
Good luck.
Click to expand...
Click to collapse
Hello and sorry for the inconvenience but what do you mean with the .pit? Is that what comes out in Odin? I have to activate it?
And if I already have the latest firmware on my device.
Thanks and sorry for my English
Panchoso said:
Hello and sorry for the inconvenience but what do you mean with the .pit? Is that what comes out in Odin? I have to activate it?
And if I already have the latest firmware on my device.
Thanks and sorry for my English
Click to expand...
Click to collapse
Hi , Search over the internet What is a Pit file ...
You say that you have latest firmware on your device and the problem is still there ?
I need more information about your device:
1. For which region your phone is made ?
2. What is 7 and 8 number from imei ? Example 378064 07 6921045 in this case is 07
3. Is your device lock on some provider or is Sim Free ?
4. What is current software version on your device ?
Teddy Lo said:
Hi , Search over the internet What is a Pit file ...
You say that you have latest firmware on your device and the problem is still there ?
I need more information about your device:
1. For which region your phone is made ?
2. What is 7 and 8 number from imei ? Example 378064 07 6921045 in this case is 07
3. Is your device lock on some provider or is Sim Free ?
4. What is current software version on your device ?
Click to expand...
Click to collapse
It's for Latin America Chile
imei 355976/08/217063
Entel / Chile
Android? 8.0 Oreo
You say that you have latest firmware on your device and the problem is still there ?
Mmm ... I have the latest firmware on my computer when I went and I wanted to "install" the mobile did not respond and everything failed, and now a new error appeared that says "An error has occurred while updatin the device software. Emergency recovery function in the Smart Switch PC software "I understand that it is a samsung program but for what I read it only works if I have a recovery of my mobile saved in the PC.
Sorry for my English
Hi , I think you first wroted that your device is A6 but now I see is A7 , imei that you send me is wrong ( don't share to public , send me imei private )...
Or go to https://www.sammobile.com/firmwares/ write your model name , and set region Chil Entel (CHE) .
Download latest version of Odin:
https://samsungodin.com/download/Odin3_v3.13.1.zip
Extract your firmware to Desktop and load your firmware inside Odin , make sure that your phone is into Download mode , connect your phone with USB to PC and make sure that green Com port is open inside Odin flash tool , now click on Start to Begin flashing ....
Before that make sure that your battery is charged !!!
Good luck......
Teddy Lo said:
Hi , I think you first wroted that your device is A6 but now I see is A7 , imei that you send me is wrong ( don't share to public , send me imei private )...
Or go to https://www.sammobile.com/firmwares/ write your model name , and set region Chil Entel (CHE) .
Download latest version of Odin:
https://samsungodin.com/download/Odin3_v3.13.1.zip
Extract your firmware to Desktop and load your firmware inside Odin , make sure that your phone is into Download mode , connect your phone with USB to PC and make sure that green Com port is open inside Odin flash tool , now click on Start to Begin flashing ....
Before that make sure that your battery is charged !!!
Good luck......
Click to expand...
Click to collapse
Wow friend thank you very much now it repaired all the mobile thank you very much really
Sorry for my English but thank you very much for everything I was already a little nervous
You welcome
Hello,
I have a Ulefone Armor 3T with the stock firmware and software. It appears Ulefone has posted a firmware update on the Ulefone Software updates page (I can't post the URL yet, do to XDA new user restrictions, but you can find it on their website).
I have followed the directions, but can't figure out how to boot up the phone, so that the PC sees it as a COM port, not a USB portable device, and keeps it connected via COM port. The directions say to make sure the phone is off, hold the volume up/down at the same time and plug it into the computer using USB, then run the firmware loader's SCAN mode to find the com port. I can do that, it finds the com port (different every time, but usually COM8, COM11, COM12), but then the battery starts charging and the software can't find the phone anymore. It's as if the firmware update mode won't stick?
I'm new to Android and Ulefone. Maybe I"m holding the button too long or not long enough? If I hold the volume buttons too long, it goes into some kind of recovery mode. Any suggestions appreciated.
Thanks, Joe
1 Con el teléfono apagado conecta el cable usb y presiona DESPUES DE CONECTAR el botón Volumen abajo y el flasheo rempezara,la ultima actualizacion que hay para el Armor 3T en la pagina oficial sigue siendo android 8.1 ,no han actualizado el sistema operativo totalmente decepcionado con esta marca
Howdy joedom99
Did you find out? I have same Ulefone Armor 3T and I am not really sure what version is compatible. My basic thing is to upgrade the Android OS (stock still is in 8.1 since 2018 :| ) please let me know.
Thanks in advance.