*Solved* Custom Binary Blocked By Reactivation Lock - Galaxy S6 Edge Q&A, Help & Troubleshooting

hello!
i have this problem with my S6 Edge G925F
i was using it as normally, then i opened AdAway app to check for updates, i updated hosts file, then it asked for reboot...
after that the problem came.... i can't boot in system or in recovery.. i can only boot in download mode
when i boot in system or recovery it shows "Custom binary blocked by reactivation lock" in top left corner in red..
soo, how can i fix this? i was running on odexlite nougat rom & nogeek kernel without any problems..
it just happened when i updated the hosts file :/
any fixes? i didn't do anything yet... i didn't flash anything with odin..
more info:
Product name: SM-G925F
Current Binary: Custom
System Status: Official
Reactivation Lock: On
Secure Download: Enabled
Knox Warranty Void: 1 (0x0000)
RP SWREV: B:5 K:2 S:2
plzzz help me guyyys!!! ​

one more question,
will rooting it again using this method will bypass the error while booting?
and plz help! i don't want it dead

i flashed stock recovery in here
the error is disappeared but i'm facing a bootloop.. i can't boot to recovery too.. i can only successfully boot in download..
any solutions? did i brick my phone for ever?

Solved- flashed firmware.

Another easy solution can be found here:
[Guide] Unlock FRP / Deactivate Reactivation lock, Root and recovery for Samsung

Related

Help! I've tried almost eveything

so i was trying to go back to andriod from cyanogenmod and i accidently turned the device off while in download mode. now i am on the "firmware upgrade encountered an issure. please select recovery in Kies & try again."
upper left corner reads the following
ODIN MODE
Product name: SGH-m919
Current Binary: Custom
System Status: Offical
Knox Kernal Lock: 0x0
Knox Warrenty Void: 0x1
CSB-CONFIG-LSB: 0x30
Write Protection: Enabled
eMMC Burst Mode enabled
START [224,1440]
SW EV, Check Fail : fused: 4 binary: 1
Do you have a recovery like CWM Recovery installed ?
Try flashing cyanogen mod again and then use odin to go back to stock rom.

[Q] HELP! noob problems: stuck in odin mode

hello
my phone is stuck in odin mode. the phone was rooted before, but i had a friend try to unroot it. he says everything hes tried didnt work.
all i see on my screen is
odin mode
product name: sch-i545
current binary: samsung official
system status: custom
knox kernel lock: 0x0
csb-config-lsb: 0x30
write protection: enable
eMMC BURST MODE: enabled
how do i fix this?
Bone up on odin. Many threads and YouTube videos
sent by safestrap enabled bajarom

Soft Bricked Samsung Galaxy S6

Hi there,
Im new to the whole rooting and unrooting thing. About 2 weeks ago i successfully rooted my Samsung Galaxy S6. Yesterday afternoon I rebooted my phone after "unrooting" it with SuperSU. After the reboot it got stuck in a boot loop and I dont know what to do. I tried to reflash a stock firmware with Odin but everytime it fails. I tried to hard reset the phone using TWRP recovery and no go. Here is some info:
Phone: SM-G920F
Has TWRP recovery.
On odin screen (phone) it says this after the Odin flash fails.
ODIN MODE
PRODUCT NAME: SM-G920F
CURRENT BINARY: CUSTOM
CURRENT STATUS: CUSTOM
REACTIVATION LOCK: OFF
SECURE DOWNLOAD : ENABLED
KNOX WARRANTY VOID: 1 (0x0500)
AP SWREV: B:5 K:2 S:2
SW REV. CHECK FAIL. DEVICE: 5, BINARY: 1
If you need any additional information just tell me and I'll provide it. Any help is appreciated.
Thanks,
Steven

A520f u6

A520F u6 oreo
Current binary:custom
Systems status :custom
RMM state prenormal
Warranty void: 1
When I turn on the phone this message appears"only official realesed binaries are allowed to be flash "
I think with Odin it will not be flashed
Any solutions??

Help: Tab S3 is in FAP Lock Mode

Hi,
I can't use my tablet anymore tried Odin to re-install the origin firmware "SM-T825Y_1_20180122165040_zf84f94qoe_fac.zip" (new android 8 stock ROM) but it fails, Odin shows the transfer has PASSED but I still get this message in the screen:-
"Security Error: This device has been flashed with unathorised software & is locked.
Call your mobile operator for additional support. "
I wasn't planning flashing a custom ROM the only thing I did is put OEM Lock on, not sure why I did that.
When I put in Download Mode it shows this in the screen:-
ODIN MODE [High Speed]
PRODUCT NAME: SM-T825Y
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
FAP LOCK: ON
OEM LOCK: ON
DID: 03EA1E00AE16
WARRANTY VOID: 0x1 (Ox20C)
QUALCOM SECUREBOOT: ENABLE
AP SWREV: B3 (1, 1, 1, 1, 1) K2 S2
SECURE DOWNLOAD: ENABLE
CCIC: S2 MM005 HW: 4
BOOT: 6 MAIN: DS
Regards,
Sal.
1. It's FRP not FAP ya perv.
2. Reflash firmware with odin, do not go into download mode afterwards before 3.
3. The rest watch this video carefully, and next time you want to leave your device stock, leave it stock, if you want to install a custom rom or twrp, do not have auto reboot ticked.
4. here is link ---> https://www.youtube.com/watch?v=o0T-CR-KpfM
I did reflash with odin but I still get this message "Security Error: This device has been flashed with unathorised software & is locked.
Call your mobile operator for additional support. " There is another small message on top , "Custom binary blocked by FRP. (boot.img)"
Odin tells me its PASSED but the Tablet still says its locked FRP and OEM locked .
In download mode I am getting same info.
I just went to the Samsung Shop and they fixed it for free, they said they just put a new firmware not sure how they did it but I tried it myself with latest firmware but I couldn't get rid of the lock, I am missing something? like software? or just not enough info about about getting rid of locks?
I had the same issue after i installed a Xposed module. Had to reflash Pie Bootloader and Rom via odin. Now it boots, but i can't flash twrp anymore... It always fails.

Categories

Resources