Hi, yesterday I was trying to flash a new rom to the Amazfit Pace. When I was trying to go to the Fastboot Mode, the watch suddenly went with the screen in black and now I can't do anything. I've tried pressing the power button for a long time expecting a reboot but with no success.
I've also tried to connect the Amazfit to the computer and see if fastboot at least recognise it, but fastboot throw this error: ERROR: Unable to create a plug-in (e00002be).
What can I do? Does it have solution??
Thanks!
Related
Hi, i've a strange (but i hope common and resolvable) problem.
After all, i say that i searched through the forum (with the search function) but with the solution that i found and tried i didn't solve anything.
I start saying that i got a p500 with a broken sdcard reader board (it simply doesn't have a microsd 'cause doesn't recognize).
That phone some days ago just shut down and went stuck on the LG Logo.
I tried at first the hard reset (home+vlm down+pwr), nothing happens.
I tried then the recovery mode and try to update with lg updater, and didn't work, lg doesn't recognize the phone on the updater (but on the main screen of the BBc app does).
The last thing that i noticed is that one time, powering on the phone, button's leds flashed about 4-5 times. but if i try to re-do the action, doesn't get anymore.
I would know if there is another way to exit from this stuck-screen.
I also post the log of error i get from kdz:
Upgrade error
WParam: 100
LParam: 500
Here is the log: http://pastebin.com/4SECdaT4
Other things i forgot to say:
I don't need to shake the phone, if kdz doesn't detect, i take off the battery, and turn on the phone in emergency mode (up+back+pwr).
Sometimes kdz works without that error, but it reboots the phone and it stucks again in the lg silver logo.
I read about a wipe of /system through adb, but if i try to mound /system, i get the command list.
I can't do adb devices, doesn't detect the phone, and in sequence to this, can't open the adb shell.
any suggestion?
You recovery got corrupt when it was stuck on LG logo, which could be easily solved by fastboot method of recovery flashing.
I was on the same situation like you are on now. Now follow this:
Try booting into fastboot mode by pressing "Power+ home buttons"
If it does then notify me here or at PM.
Between this is not the appropriate section for this thread.
I tried to fastboot, i did fastboot erase recovery and fastboot flash recovery recovery.img commands, no errors, but when i type fastboot reboot, on the screen i read: rebooting the device, but it doesn't reboot. If i take off the usb cable, (after a big time, 10 mins for example), a --suspend-- appears.
if i take off the battery, the lg logo is stuck again, and if i do home+vol down+pwr the clockwork mod doesn't appear.. any suggestion?
See your PM
Sent from my LG-P500 using Tapatalk
Hello, I tried flashing a font from romtoolbox lite using flashify but my phone only displays
"[470] fastboot mode started"
"[520] udc_start()"
I can't access download mode or recovery mode. What do i need to do? I also can't turn it off. I tried letting it die then turning back on thinking it would just start up normally but it just goes back to it. Whenever i plug into my laptop it just flashes a red led. Please help me, i don't have the sort of money to just go out and buy a new one and also my dad would kill me if he found out i broke my phone.
Hello guys, here is the thing that happened to me. One day my Huawei P9 Lite started lagging and suddenly I couldn't even turn Wifi, bluetooth, mobile data or anything on. I couldn't even open the settings app. So I decided to factory reset the phone from recovery screen while booting. Factory reset resulted as successful, but after the reboot I got into first set up screen where I can only get over 2 steps where I come to choose my region and here is where it all lands. When I press next, it looks like going to next step but there is black screen for a second and it turns back to choosing region. I tried using all the regions but nothing. Next thing, I wanted to use download mode to reflash the device using downloaded stock firmware but I couldn't move the file to phone because the phone was not fully loaded. Next thing I tried was that I used ADB to push a file to computer and I got error. I have all drivers installed properly. Then I used Fastboot and rescue mode, where it says that my phone's bootloader is unlocked but when I try to flash device, it says 'Command not allowed'. I found on internet that I have to turn on debugging mode in settings but I can't start the phone so I don't know what to do.
Please help me, I don't know what else to do
Thank you very much
Hi guys, i got this watch from a friend to assist him to unbrick it.
It came to me as stuck in the Amazfit logo, i accidentally tried to flash the Amazfit pace rom 1.3.0 and it worked, i got to the OS, and i could scan the QR code, the problem was the touch was not working.
so i tried to install few of the Amazfit Stratos roms, non of them work, they all stuck at the Logo.
then at one of the tries i accidentally pressed twice for the secure erased mode.
now the watch is with black screen and connected to the PC, i have the driver and also the software, but i couldn't find an image that also have the U-boot partition.
Can someone please assist of how to get the watch back to fastboot or even better to a functioning watch ?
You may want to check this:
https://forum.xda-developers.com/showpost.php?p=78940684&postcount=194
I have no expert technical background. Anyway, while I was at college I had my phone turned off, so after I went back home I turned it on again. It entered Huawei eRecovery screen. I tapped Download latest version and recovery, then download and recover and went to Starting WIFI screen. After few laps of the dot around the WIFI logo I connected to my WIFI. After a few more laps I got Getting package info failed screen displayed. I tried to recover my phone many times, even by rebooting, and I still got the same error. Can anybody help me?
I entered FastBoot mode and I'm stuck now. I did what it said and opened HiSuite, but HiSuite did not recognize my phone.
EDIT: I managed to exit FastBoot somehow.
Anyone???
Come on, please answer.