Related
MMORPG Order & Chaos Online HD v1.0.2 Apk Working On Evo3D & Some Android Devices
This should work on most Android device that have root,R/W access,s-off.ect
PLEASE NOTE THAT THIS GUIDE IS SHOWING YOU HOW TO GET THE OFFICIAL GAME DIRECTLY FROM MARKET
THE BENEFIT OF GETTING THE GAME THIS WAY INSTEAD OF THE HACK OR PATCH VERSION IS LISTED BELOW
1:The official version will allow you to make in-app purchase which can get you the nice items like experience stones which increase xp by 100%
2:You will be able to get the overpower super gears at later levels.
3:The Game just runs way smoother than the hack or patch version(NO LAG AT ALL)
4:You will be able to get the awesome future updates soon as they are available because of this method here
5:No crashes because it is the Official game directly from market.The crack/patch version is known for having Force Closes and Crashes.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NOTE:Things you will need are Build.Prop Editor or Root Explorer which is what i used,ChainFire 3D and of course your phone need to be rooted with s-off and Superuser access,you should do a nand backup from custom recovery just incase u messed up somewhere.
CONFIRM:Before we begin,uninstall the patch/hack version if you have it installed,You may also delete the the old game cache folder GloftMMHM if you want a clean installation and a low chance of any problems or if you are getting unable to download message.
STEP 1:EDITING BUILD.PROP
This is where you are going to edit your build.prop to make market think your device is one of the compatible device for O&C and by doing that you will be able to see and download the game from Market directly.The changes you will be making to your build.prop are listed below.Keep in mind I didn't find the second line ro.product.model.internal= on Evo3D build.prop,but that line didn't matter it seems.
Some device have identical lines listed more than once,like for example Evo3D have two ro.product.model lines,so you must edit both lines if u see it more than once .
Make the following edit to your build.prop to make the game appear in market and u should be able download & install it.
Build.Prop #1 FOR HTC DEVICES IF THIS BUILD.PROP WORK FOR YOU,THEN YOU DONT HAVE TO FOLLOW THE OTHER EXTENDED STEPS
ro.product.brand=sprint
ro.product.model=PG06100
ro.product.name=htc_speedy
ro.product.device=speedy
ro.product.board=speedy
After you made the above change to your prop and save & reboot.Check market to see if u can download and install Order & Chaos.If you are able to see it but dont see the option to install it,then reboot your device a second time.If you are still unable to install the game then you have to refer to the addition steps below.
Make the change below to your prop if the above method didnt work for you and you will have to follow the additional steps if you have to use the build.prop below
BUILD.PROP #2 FOR NON HTC DEVICES
ro.product.model=Optimus 2X
ro.product.model.internal=
ro.product.brand=lge
ro.product.name=lge_star
ro.product.device=p990
ro.product.board=p990
Thanks to mattijuana from Atrix forum for settings
If you are using Root explorer,open it up then navigate to system then Build.prop,long press on it then select open up in text editor,make sure its mount as R/W and then make the above changes ONLY please,if u dont your device can get stuck in bootloop like mine did cause i was rushing and didnt capitalize what needed to be or maybe i didnt put space.
If you are using Build.Prop Editor app it simplify the process a little.
After you make the changes to your build.prop and save it you will need to reboot your device for the changes to take effect.
STEP 2:BUYING & INSTALLING THE GAME DIRECTLY FROM MARKET
Open up market and search for Order and Chaos and you should see it and able to download and install it because market thinks your phone is Optimus 2X(If you are able to see it but cant download it you might need old Market v2.3.6).Buy it and then install it then launch it and download the remaining data,its about 600mb plus in size so a fast connection would be nice.After that the game will launch properly but mine got stuck at the loading screen mainly because its looking for a NIVIDIA chip because your device is imitating a phone that use that NIVIDIA chip.So now we have to spoof our Qualcomm chip,thats where ChainFire comes in.Thanks Malebolgia from Whispering Island Server and guild leader of FORGOTTEN a level 60 guild for the information on ChainFire.
STEP 3:SPOOFING YOUR DEVICE QUALCOMM CHIPS WITH CHAINFIRE 3D PRO(HACK VERSION WOULD NOT WORK)
IF YOUR DEVICE ALREADY HAVE A NVIDIA CHIP,THEN YOU CAN PROBABLY SKIP THIS STEP
YOU WILL NEED CHAINFIRE 3D PRO VERSION FROM MARKET.....(CRACKED VERSION MAY NOT WORK)....
You will need the ChainFire3D Pro version app from market and get the pro version so you can install your own driver and apply pro version features,The driver you will need is NVIDIA driver that you can find here http://www.megaupload.com/?d=4P9LEW7P or if this link is down or the file is deleted you will have to search for LibGLEMU_NVIDIA file in zip format on Google.
You will need to grant superuser access for ChainFire3D and when you first launch it you will need to install the CF3D(then if you Evo3D you may need to remove your battery to boot back up after installing CF3D driver if your device froze trying to reboot) that is already provided with the app then you will need to install the NVIDIA driver you downloaded and is on your SD card.For some reason when you install those two drivers on Evo3D your phone will not reboot unless you take the battery out after each driver installment then power on your device.
NOTE:
Some device don't lockup or freeze after installing CF3D & NIVIDA drivers and would require the battery to be remove to reboot,But my Evo3D does.
After you installed the require drivers and rebooted twice after each driver installment by taking out your battery cause it wouldnt reboot normaly after the drivers installment on Evo3D,Im not sure about other devices.Launch ChainFire then navigate to Pre-app OpenGL settings and select Order and Chaos app and apply the NIVDIA plugin thats on your SD card and then check HIDE CF3D ID and DUMP Shaders options.Then launch Order and Chaos app.It should now load up properly and you can create account or if u have one already sign in and create a character and join the Whisperin Island Server of America,the best sever in my opinion
STEP 4:YOU ARE DONE,NOW GO ENJOY THE GAME IF YOU FOLLOW THE STEPS ABOVE TO THE LETTER.
Getting in-app purchase to work require Market version 3.0.27 and above
Now you should have the game running fine if you follow the steps correctly and made a nand backup just for good measure.
Please Join The Whispering Island Server if you dont want to get Ganck by higher level players or you are unable to complete a quest because over 20 people is doing the same quest as you on the other crowded servers with lag issues.My Name is Kaizer a Lv60(Max) warrior and leader of legends guild with over 200 active members,Ask for invite to Legends guild on global chat within the game if you chose Whispering Island Server,hope you did.
This is how my HTC EVO 3D Build.prop look after editing.
ro.com.google.clientidbase=android-sprint-us
ro.com.google.clientidbase.yt=android-sprint-us
ro.com.google.clientidbase.am=android-sprint-us
ro.com.google.clientidbase.vs=android-sprint-us
ro.com.google.clientidbase.gmm=android-sprint-us
ro.com.google.clientidbase.ms=android-sprint-us
ro.phone.min_match=7
ro.product.model=Optimus 2X<-----EDITED LINE
ro.cdma.home.operator.alpha=sprint
gsm.sim.operator.alpha=sprint
gsm.operator.alpha=sprint
ro.cdma.home.operator.numeric=310120
gsm.sim.operator.numeric=310120
gsm.operator.numeric=310120
gsm.sim.operator.iso-country=us
gsm.operator.iso-country=us
# begin build properties
# autogenerated by buildinfo.sh
ro.aa.taskid=193975
ro.aa.romver=1.11.651.3
ro.aa.maincid=SPCS_001
ro.aa.modelid=PG8610000
ro.aa.cidlist=SPCS_001
ro.aa.rid=146
ro.aa.customizationid=184167
ro.aa.project=Shooter
ro.aa.skulist=651
ro.product.brand=lge
ro.product.model=Optimus 2X<------EDITED LINE
ro.aa.mainsku=651
ro.com.google.clientidbase=android-sprint-us
ro.build.id=GRI40
ro.build.display.id=GRI40
ro.build.version.incremental=69941
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.3
ro.build.date=一 5月 23 22:21:14 CST 2011
ro.build.date.utc=1306160474
ro.build.type=user
ro.build.user=
ro.build.host=AA108
ro.build.tags=release-keys
ro.product.model=Optimus 2X<------EDITED LINE
ro.product.brand=lge<------EDITED LINE
ro.product.name=lge_star<------EDITED LINE
ro.product.device=p990<------EDITED LINE
ro.product.board=p990<------EDITED LINE
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=HTC
ro.product.locale.language=hdpi
ro.product.locale.region=
ro.wifi.channels=
ro.board.platform=msm8660
# ro.build.product is obsolete; use ro.product.device
ro.build.product=shooter
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=1.11.651.3 CL69941 release-keys
ro.build.description=1.11.651.3 CL69941 release-keys
ro.build.changelist=69941
ro.product.ua=
ro.build.fingerprint=sprint/htc_shooter/shooter:2.3.3/GRI40/69941:user/release-keys
ro.build.project=193975
ro.product.version=1.11.651.3
ro.build.languageremove=0
keyguard.no_require_sim=1
# end build properties
#
# system.prop for mahimahi
#
ro.sf.lcd_density=240
debug.fb.rgb565 = 0
#C2D
debug.composition.type = c2d
rild.libpath=/system/lib/libhtc_ril.so
# Default network type.
# 4 => CDMA mode preferred.
ro.telephony.default_network=4
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data_netmgrd_nint=8
persist.data_netmgrd_mtu=1472
#
wifi.interface=eth0
wifi.supplicant_scan_interval=15
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version = 131072
# This is a high density device with more memory, so larger vm heaps for it.
# Change to 32m, due to 2.3.3 GB already change to 32m
dalvik.vm.heapsize=32m
# For the default value of agps
ro.ril.def.agps.mode = 2
# For emmc phone storage
ro.phone_storage = 0
# For ext4 file system
ro.ext4fs = 1
# For FOTA setting (leave empty value to use default)
ro.htc.checkin.url = http://andchin.htc.com/android/checkin
ro.htc.checkin.crashurl = http://andchin.htc.com/android/crash
ro.htc.checkin.url_CN = http://andchin.htccomm.com.cn/android/checkin
ro.htc.checkin.crashurl_CN = http://andchin.htccomm.com.cn/android/crash
ro.htc.checkin.exmsg.url = http://fotamsg.htc.com/android/extra/
ro.htc.checkin.exmsg.url_CN = http://fotamsg.htccomm.com.cn/android/extra/
ro.htc.appupdate.url = http://apu-chin.htc.com/check-in/rws/and-app/update
ro.htc.appupdate.url_CN = http://apu-chin.htccomm.com.cn/check-in/rws/and-app/update
ro.htc.appupdate.exmsg.url = http://apu-msg.htc.com/extra-msg/rws/and-app/msg
ro.htc.appupdate.exmsg.url_CN = http://apu-msg.htccomm.com.cn/extra-msg/rws/and-app/msg
# release Bluetooth HW/SW information
ro.bt.chipset = Broadcom BCM4329-B1
ro.bt.stack = Broadcom BTL-A
ro.bt.stack.version = 2.0.50.032
#0x10000010010100101000011 represent bt profile list
ro.bt.profiles = 4270403
# Properties of BTLA stack
service.brcm.bt.activation = 0
service.brcm.bt.srv_active = 0
service.brcm.bt.hcid_active = 0
service.brcm.bt.btld = 0
service.brcm.bt.btld_pid = 0
service.brcm.bt.avrcp_pass_thru = 0
service.brcm.bt.avrcp_toggle = 1
#Welly_Fang
ro.htc.device.slot1 = NV
# Following property will be reference by Settings.
ro.product.processor = 1.2 GHz dualcore
ro.product.ram = 1GB
ro.product.display_resolution = 4.3 inch QHD resolution
ro.product.main_camera = 5M * 2
ro.product.front_camera = 1.3M
ro.product.bluetooth = 3.0
ro.product.wifi = 802.11 b/g/n
# For opensense sdk
ro.htc.common.version = 3.0.0.0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.networklocation=1
ro.setupwizard.mode=DISABLED
ro.setupwizard.mode=OPTIONAL
ro.config.ringtone=QuietlyBrilliant.mp3
ro.config.notification_sound=Zeta.mp3
ro.config.alarm_alert=NewDay.mp3
ro.config.cal_notification=Epsilon.mp3
ro.config.msg_notification=Gamma.mp3
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=2.3_r3
media.a1026.nsForVoiceRec=0
htc.audio.alt.enable=1
htc.audio.hac.enable=1
ro.setupwizard.enterprise_mode=1
ro.media.codec_priority_thumb=so
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Sent from my Optimus 2X using XDA Premium App
Dude you're the effing bomb!! It worked it really worked. Definitely a thanks. I couldn't get it off the market so i had some searching for the apk. I think I'm really gonna love this game. My!? Is why doesn't gameloft port it over since as you can see it can run on our phones very well.
mrjaydee82 said:
Dude you're the effing bomb!! It worked it really worked. Definitely a thanks. I couldn't get it off the market so i had some searching for the apk. I think I'm really gonna love this game. My!? Is why doesn't gameloft port it over since as you can see it can run on our phones very well.
Click to expand...
Click to collapse
Glad I can help
Sent from my Optimus 2X using XDA Premium App
This game really heats up my phone big time, what is a safe temp you think for evo 3d? After a little playing it got up to 52 degrees celcius
mrjaydee82 said:
This game really heats up my phone big time, what is a safe temp you think for evo 3d? After a little playing it got up to 52 degrees celcius
Click to expand...
Click to collapse
Yeah it do hit extreme temperature mainly because data is constantly being transfer and if you are on a weak connection the harder the radio will have to work thus generating more heat and if u are playing while plug in and using the Evo3D charger which charges at a higher voltage the faster the phone temp will go up,mine goes way above 54c/110'F,but don't worry,the led should start blinking from Green/Orange repeatedly when the phone start to hit unsafe temperature,and when it do start to blink orange/green you might want to unplug the charger and/or you may need to pull the battery out for about about 2-5mins if you are concern about damaging your device by overheating it,but I just reboot and wait few minutes to start playing again cause I have a otter box case and pulling battery out is a pain.
Also try setting resolution for the game to 16bit from ChainFire3D settings it will reduce memory use and help with battery heat because the chips are drawing less power,and you wouldn't even notice the difference in 32bit and 16bit.And u can also mess around with SetCpu or whatever to lower your CPU speed under 1ghz.Or if you are home and on wifi,turn off mobile data/3G u will still be able to get txt and calls dont worry.Those settings seems to keep temps down a little bit.
Sent from my Optimus 2X using XDA Premium App
Okay thanks
Thank you ever so much... I've been waiting on this for a minute...
ourprisonplanet said:
Thank you ever so much... I've been waiting on this for a minute...
Click to expand...
Click to collapse
You are welcome sir
4g for htc evo would look like this?
ro.product.model = Optimus 2X
= ro.product.model.internal
ro.product.brand = LGE
ro.product.name = lge_star
ro.product.device = P990
ro.product.board = P990
BUILD_DISPLAY_ID=4.24.651.1
dalvik.vm.dexopt-flags=m
dalvik.vm.heapsize=48m
dalvik.vm.lockprof.threshold=500
dalvik.vm.stack-trace-file=/data/anr/traces.txt
gsm.operator.alpha=Sprint
gsm.operator.iso-country=us
gsm.operator.numeric=310120
gsm.sim.operator.alpha=Sprint
gsm.sim.operator.iso-country=us
gsm.sim.operator.numeric=310120
htc.audio.alt.enable=1
htc.audio.hac.enable=1
keydispatchtimeout=15000
keyguard.no_require_sim=1
media.a1026.nsForVoiceRec=0
media.stagefright.enable-http=true
media.stagefright.enable-meta=true
media.stagefright.enable-player=true
media.stagefright.enable-scan=true
net.bt.name=Android
persist.service.adb.enable=1
persist.service.mount.playsnd=0
persist.sys.shutdown.mode=hibernate
postprocess.denoise_level=5
postprocess.iso_midband=400
rild.libpath=/system/lib/libhtc_ril.so
ring.delay=0
ro.aa.cidlist=SPCS_001
ro.aa.customizationid=177316
ro.aa.maincid=SPCS_001
ro.aa.mainsku=651
ro.aa.modelid=PC3610000
ro.aa.project=SuperSonic_GB
ro.aa.rid=62
ro.aa.romver=4.24.651.1
ro.aa.skulist=651
ro.aa.taskid=193963
ro.board.platform=qsd8k
ro.bt.chipset=Broadcom BCM4329-B1
ro.bt.profiles=4270339
ro.bt.stack=Broadcom BTL-A
ro.bt.stack.version=2.0.50.032
ro.build.date=一 5月 23 22:29:13 CST 2011
ro.build.date.utc=1306160953
ro.build.description=Ginger-AleV5 ro.build.changelist
ro.build.display.id=GRI40
ro.build.fingerprint=sprint/htc_supersonic/supersonic:2.3.3/GRI40/61076:user/release-keys
ro.build.host=AA135
ro.build.id=GRI40
ro.build.product=supersonic
ro.build.project=198504
ro.build.tags=release-keys
ro.build.type=user
ro.build.user=root
ro.build.version.codename=REL
ro.build.version.incremental=60865
ro.build.version.release=2.3.3
ro.build.version.sdk=10
ro.cdma.home.operator.alpha=Sprint
ro.cdma.home.operator.numeric=310120
ro.com.android.dataroaming=true
ro.com.google.clientidbase=android-sprint-us
ro.com.google.clientidbase.am=android-sprint-us
ro.com.google.clientidbase.gmm=android-sprint-us
ro.com.google.clientidbase.ms=android-sprint-us
ro.com.google.clientidbase.vs=android-sprint-us
ro.com.google.clientidbase.yt=android-sprint-us
ro.com.google.gmsversion=2.3_r2
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
ro.config.alarm_alert=NewDay.mp3
ro.config.cal_notification=Epsilon.mp3
ro.config.msg_notification=Gamma.mp3
ro.config.notification_sound=Zeta.mp3
ro.config.ringtone=RingRing.mp3
ro.htc.checkin.crashurl=http://andchin.htc.com/android/crash
ro.htc.checkin.url=http://andchin.htc.com/android/checkin
ro.htc.common.version=2.1.0.0
ro.media.cam.preview.fps=0
ro.media.codec_priority_for_thumb=so
ro.media.dec.aud.wma.enabled=1
ro.media.dec.jpeg.memcap=20000000
ro.media.dec.vid.wmv.enabled=1
ro.media.enc.aud.amrnb.bps=5525,12200
ro.media.enc.aud.amrnb.ch=1,1
ro.media.enc.aud.amrnb.hz=8000,8000
ro.media.enc.aud.codec=amrnb
ro.media.enc.file.format=3gp,mp4
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.duration=60
ro.media.enc.hprof.file.format=mp4
ro.media.enc.hprof.vid.bps=2000000
ro.media.enc.hprof.vid.fps=24
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.width=720
ro.media.enc.jpeg.quality=95,85,70
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.codec.vid=m4v
ro.media.enc.lprof.duration=30
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.vid.bps=256000
ro.media.enc.lprof.vid.fps=15
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.width=176
ro.media.enc.vid.codec=m4v,h263,h264
ro.media.enc.vid.h263.bps=64000,6000000
ro.media.enc.vid.h263.fps=1,30
ro.media.enc.vid.h263.height=144,720
ro.media.enc.vid.h263.width=176,1280
ro.media.enc.vid.h264.bps=64000,6000000
ro.media.enc.vid.h264.fps=1,30
ro.media.enc.vid.h264.height=144,480
ro.media.enc.vid.h264.width=176,800
ro.media.enc.vid.m4v.bps=64000,8000000
ro.media.enc.vid.m4v.fps=1,30
ro.media.enc.vid.m4v.height=144,720
ro.media.enc.vid.m4v.width=176,1280
ro.opengles.version=131072
ro.product.bluetooth=2.1 + EDR
ro.product.board=supersonic
ro.product.brand=sprint
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.device=supersonic
ro.product.display_resolution=4.3 inch WVGA resolution
ro.product.front_camera=1.3M
ro.product.locale.language=hdpi
ro.product.locale.region=
ro.product.main_camera=8M
ro.product.manufacturer=HTC
ro.product.model=PC36100
ro.product.name=htc_supersonic
ro.product.processor=1GHz
ro.product.ram=512MB
ro.product.ua=
ro.product.version=AvA-Modified
ro.product.wifi=802.11 b/g/n
ro.ril.def.agps.mode=2
ro.ril.def.preferred.network=4
ro.ril.set.mtu1472=1
ro.setupwizard.enterprise_mode=1
ro.setupwizard.mode=DISABLED
ro.sf.hw=1
ro.sf.lcd_density=240
ro.telephony.call_ring.delay=0
ro.telephony.default_network=4
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.wifi.channels=
service.brcm.bt.activation=0
service.brcm.bt.avrcp_pass_thru=0
service.brcm.bt.avrcp_toggle=1
service.brcm.bt.btld_pid=0
service.brcm.bt.hcid_active=0
service.brcm.bt.srv_active=0
service.brcm_bt.btld=0
settings.display.autobacklight=1
settings.display.brightness=143
watchdogtimeout=120000
wifi.interface=etho
wifi.supplicant_scan_interval=30
windowsmgr.max_events_per_sec=100
windowsmgr.support_rotation_270=true
ro.config.ringtone=Windchimer.mp3
Thanks
I would totally put chainfire on my nook color, but your instructions kind of scare me since we cannot remove the battery.. and your advice was right about putting the new market back on, I could buy runes and such afterwards. Unfortunately it can't see the game anymore, but since I could buy it legit I don't mind.
Btw, I am in your guild. Good write up btw.
Edit: No problems with chainfire(must be your phones), and a notable amount of smoothness since I did it. Good idea.
Silentbtdeadly said:
I would totally put chainfire on my nook color, but your instructions kind of scare me since we cannot remove the battery.. and your advice was right about putting the new market back on, I could buy runes and such afterwards. Unfortunately it can't see the game anymore, but since I could buy it legit I don't mind.
Btw, I am in your guild. Good write up btw.
Edit: No problems with chainfire(must be your phones), and a notable amount of smoothness since I did it. Good idea.
Click to expand...
Click to collapse
Did you try the option in ChainFire3D that says Fix Market Settings to see if u can see it again in the new Market?
I'd love to give this a go, but I can't get past step 2. I downloaded the new version from the market, with my modded build.prop, but when I go to run it, and download content, it says, "an error has occurred with the download, would you like to restart it? " or something to that effect, click yes, and the same message comes back up. Over, and over. I've posted on the gameloft forum, but no help over there. Hopefully, someone will have answers or help here. Thanks for reading.
Veedubklown said:
I'd love to give this a go, but I can't get past step 2. I downloaded the new version from the market, with my modded build.prop, but when I go to run it, and download content, it says, "an error has occurred with the download, would you like to restart it? " or something to that effect, click yes, and the same message comes back up. Over, and over. I've posted on the gameloft forum, but no help over there. Hopefully, someone will have answers or help here. Thanks for reading.
Click to expand...
Click to collapse
Try using a different connection or uninstall game reboot then reinstall,if that don't work,you may need to find and download the remaining game cache off the internet which is about 650MB+ and I'm not sure if the game Cache off another device may work on Evo3D,but if u look hard you might find the Optimus 2X or GX2,that's the device our phone is imitating ,You can then place it in the gameloft/games/GloftMMHM folder on your SD card,then reinstall the game from market,that might probably work because the game would only require about 160+MB more to complete.If that doesn't work,refer to method 2 below.
so here is what I want you to try.
step 1:
Uninstall the Order & Chaos you downloaded from Market and download & install the one from the link I PM/sent you cause I can't post it here.
Step 2:
Launch the one you downloaded from my link and see if it will download the remaining game from Gameloft severs.
Step 3:
If you were able to complete the download,leave the game and then uninstall Order & Chaos again then reinstall the one from Market it should just require about 165+MB more to complete this time around because its a newer version of the game.
Let me know how it goes.
will it work with this asus eee pad code?
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=HMJ37
ro.build.display.id=HMJ37.WW_epad-8.4.4.11-20110711
ro.build.version.incremental=WW_epad-8.4.4.11-20110711
ro.build.version.sdk=12
ro.build.version.codename=REL
ro.build.version.release=3.1
ro.build.date=Mon Jul 11 14:47:25 CST 2011
ro.build.date.utc=1310366845
ro.build.type=user
ro.build.user=
ro.build.host=Mercury
ro.build.tags=release-keys
ro.product.model=EPAD
ro.product.brand=asus
ro.product.name=WW_epad
ro.product.device=EeePad
ro.product.board=EeePad
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=asus
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=tegra
# ro.build.product is obsolete; use ro.product.device
ro.build.product=EeePad
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=WW_epad-user 3.1 HMJ37 WW_epad-8.4.4.11-20110711 release-keys
ro.build.fingerprint=asus/WW_epad/EeePad:3.1/HMJ37/WW_epad-8.4.4.11-20110711:user/release-keys
ro.build.characteristics=tablet,nosdcard
# end build properties
ro.opengles.version = 131072
wifi.interface=wlan0
rild.libpath=/system/lib/libmbm-ril.so
rild.libargs=-d /dev/ttyACM0 -i wwan0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=256m
wifi.version.driver=V5.1.50
bt.version.driver=V6.17
gps.version.driver=V1.3.2
keyguard.no_require_sim=true
drm.service.enabled=1
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=3.1_pre-r1
gsm.bodysargsm=32,26,29,29
ro.com.google.clientidbase=android-asus
ro.wifi.country=US
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
farr3ll said:
will it work with this asus eee pad code?
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=HMJ37
ro.build.display.id=HMJ37.WW_epad-8.4.4.11-20110711
ro.build.version.incremental=WW_epad-8.4.4.11-20110711
ro.build.version.sdk=12
ro.build.version.codename=REL
ro.build.version.release=3.1
ro.build.date=Mon Jul 11 14:47:25 CST 2011
ro.build.date.utc=1310366845
ro.build.type=user
ro.build.user=
ro.build.host=Mercury
ro.build.tags=release-keys
ro.product.model=EPAD
ro.product.brand=asus
ro.product.name=WW_epad
ro.product.device=EeePad
ro.product.board=EeePad
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=asus
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=tegra
# ro.build.product is obsolete; use ro.product.device
ro.build.product=EeePad
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=WW_epad-user 3.1 HMJ37 WW_epad-8.4.4.11-20110711 release-keys
ro.build.fingerprint=asus/WW_epad/EeePad:3.1/HMJ37/WW_epad-8.4.4.11-20110711:user/release-keys
ro.build.characteristics=tablet,nosdcard
# end build properties
ro.opengles.version = 131072
wifi.interface=wlan0
rild.libpath=/system/lib/libmbm-ril.so
rild.libargs=-d /dev/ttyACM0 -i wwan0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=256m
wifi.version.driver=V5.1.50
bt.version.driver=V6.17
gps.version.driver=V1.3.2
keyguard.no_require_sim=true
drm.service.enabled=1
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=3.1_pre-r1
gsm.bodysargsm=32,26,29,29
ro.com.google.clientidbase=android-asus
ro.wifi.country=US
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Click to expand...
Click to collapse
If you your Tab is rooted with R/W and you are able to edit the corresponding Build.Prop settings in first post,then yes it might work,because our phone is able to imitate Tabs too & vice versa.But keep in mind you will be installing a phone version of the game and it might not look full screen on you pad,I'm not sure.
still reads as incompatible at market
Lord_Kaizer said:
If you your Tab is rooted with R/W and you are able to edit the corresponding Build.Prop settings in first post,then yes it might work,because our phone is able to imitate Tabs too & vice versa.But keep in mind you will be installing a phone version of the game and it might not look full screen on you pad,I'm not sure.
Click to expand...
Click to collapse
Unless you have found anything different, there doesn't appear to be a "phone" version and tablet version, nothing I have found suggests the way the game renders, the sd card contents, or changing the build.prop has changed those things. Since I am using a pad, I would like to be able to test this, but when I put the galaxy tab settings in my build.prop nothing was any different than before.
I am very curious though.
farr3ll said:
still reads as incompatible at market
Click to expand...
Click to collapse
Did you reboot after changing your build.prop? The changes won't take effect until you do, and this method is verified as working.
I have a totally different device, but the method that worked for me to be ABLE to see/download it in the market, I had to be using the OLD style market(the newer one is more device aware).. then to be able to buy game time in game I had to install the new market(grey/black style).
farr3ll said:
still reads as incompatible at market
Click to expand...
Click to collapse
At which point do it say incompatible,anwser the following questions
1: Are you using a custom rom?
I'm using stock
2: Did you have the patch/hack version installed before this?
if u did,u may have to delete the old cache folder GloftMMHM from the gameloft folder on your SD and start fresh
3: were u able to see the game in market
and download & install,but then got incompatible when u launch the game?
if that happen,did you install the NVIDIA driver and check hide CF3D options.
2: Did the game load up normal after installing or did the incompatible message pop up?
If so,please check the build.prop changes and comepare it line by line to mine in the second post.And check the steps again please.
yeah, it should work for any device. thank you so much kaizer. it worked for me on evo3d. now i can play.
Droid X2 custom build.prop
I've been cruising with some of these edits for quite awhile, and I recently modified them for the Droid X2. Some may find this beneficial, as it is, in my opinion, better than what comes stock. I realize this is pretty basic, but some people don't know what the settings mean. This way they can just drop it in without thinking about it.
Keep in mind, this build ID's, market fingerprint, Blur version will need to be updated with every ROM release version (e.g. 2.3.4).
You may need to double reboot after flashing the ZIP to resume data service.
Now includes permanent rooted ADB thanks to drjbliss. Now you no longer have to send files to your sdcard before su'ing into root via ADB. You can push and pull files directly to /system (or other partition) now
BSR flashable zip:
Download: http://www.multiupload.com/W11VLBH7QV
Mirror: http://www.mediafire.com/?h42cf5ci777b97u
Non-BSR flashable zip - file ONLY:
Download: http://www.multiupload.com/M4FT064X18
Mirror: http://www.mediafire.com/?q8sqe7t9sr1l12l
# ----------------------------------------
# MOTOROLA Droid X2 BLUR Build Prop
# w/ optimizations by navenedrob
# ----------------------------------------
# DO NOT DELETE THIS FILE
# This file contains specific information
# that is needed by the kernel and OS.
# ----------------------------------------
# BEGIN ENV/DEVICE OPTIMIZATIONS
# ----------------------------------------
# Set generic build ID's for OS
ro.build.id=4.5.1A-DTN-117-15
ro.build.display.id=4.5.1A-DTN-117-15
ro.build.version.full=Blur_Version.1.3.232.MB870.Verizon.en.US
# Set SDK version
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.3
# Hardware specific
ro.product.model=DROID X2
ro.product.brand=verizon
ro.product.name=daytona
ro.product.device=daytona
ro.product.board=daytona
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=motorola
ro.product.locale.language=en
ro.product.locale.region=US
ro.board.platform=tegra
# Set market
ro.build.description=daytona-user 2.3.3 4.5.1A-DTN-117-15 110615 release-keys
ro.build.fingerprint=verizon/daytona/daytona:2.3.3/4.5.1A-DTN-117-15/110615:user/release-keys
# Set RILD path
rild.libpath=/system/lib/libmoto_ril.so
# Set CDMA/radio specific properties
persist.ril.uart.flowctrl=1
persist.ril.mux.ttydevice=/dev/ttyHS3
persist.ril.mux.noofchannels=8
persist.ril.modem.ttydevice=/dev/ttySPI0
persist.ril.modem.mode=1
persist.ril.features=0x0C
persist.ril.ecclist=911,*911,#911
persist.ril.mux.retries=500
persist.ril.mux.sleep=2
persist.radio.cdma.min=0
ro.cdma.homesystem=64,65,76,77,78,79,80,81,82,83
ro.cdma.home.operator.numeric=310004
ro.cdma.home.operator.alpha=Verizon
ro.cdma.otaspnumschema=SELC,1,80,99
ro.cdma.nbpcd=1
ro.cdma.data_retry_config=default_randomization=2000,0,0,120000,180000,540000,960000
ro.cdma.sms.latin_encode=true
ro.telephony.default_network=4
ro.kernel.android.ril=yes
cdma.nbpcd.supported=false
# Motorola MMS settings
mot.mms.conn.timeout=30000
mot.mms.socket.timeout=120000
mot.mms.tr.vc.timeout=55000
mot.mms.trm.timeout=240000
mot.mms.abort.prog.lim=90
mot.mms.retry.pic.size=512000
mot.mms.retry.default=false
mot.mms.retry.timeout.1=30000
mot.mms.retry.timeout.2=180000
mot.mms.retry.timeout.3=300000
mot.mms.retry.timeout.4=480000
# Client ID's
ro.com.google.clientid=android-motorola
ro.com.google.clientidbase=android-motorola
ro.com.google.clientidbase.ms=android-verizon
ro.com.google.clientidbase.am=android-verizon
ro.com.google.clientidbase.gmm=android-motorola
ro.com.google.clientidbase.yt=android-verizon
# GMS version
ro.com.google.gmsversion=2.3_r3
# Set BLAN interface
ro.blan.interface=usb0
# WiFi scan interval (decrease for more scans, 120 = 2 minutes)
wifi.supplicant_scan_interval=120
# Dalvik VM performance options
dalvik.vm.startheapsize=8m
dalvik.vm.heapsize=48m
dalvik.vm.execution-mode=int:jit
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.dexopt-flags=m=y
dalvik.vm.jniopts=warnonly
dalvik.vm.lockprof.threshold=500
dalvik.vm.checkjni=false
persist.sys.purgeable_assets=1
# Gingerbread performance options
debug.sf.hw=1
debug.performance.tuning=1
video.accelerate.hw=1
# USB modes allowed for UI and switching
ro.ngp_available=1
ro.modem_available=1
# Disable persistent media sync
persist.mot.usb.mediasync=0
# Default USB mode
ro.default_usb_mode=0
# Enable HDMI mirror
ro.hdmi.mirror.enable=true
# Enable tethering
ro.tether.denied=false
# Decrease call ring delay for faster answer
ro.telephony.call_ring.delay=1000
# Increase amount of call volume steps
ro.config.vc_call_vol_steps=12
# Enable multitouch and max touch count
ro.product.multi_touch_enabled=true
ro.product.max_num_touch=2
# Set LCD density (grow or shrink UI size)
ro.sf.lcd_density=240
# Change scroll smoothness/speed
windowsmgr.max_events_per_sec=150
# Enable 270 degree rotation
windowsmgr.support_rotation_270=true
# Proximity sensor options
mot.proximity.distance=60
mot.proximity.delay=150
persist.mot.proximity.touch=1
# Pointer event delay
ro.min_pointer_dur=10
# Keyguard properties
keyinputqueue.use_finger_id=true
keyguard.no_require_sim=1
# Motorola settings
ro.mot.ril.danlist=611,*611,#611
ro.mot.deep.sleep.supported=true
ro.mot.hw.calibratedImager=1
ro.mot.eri.losalert.delay=1000
ro.mot.buttonlight.timeout=1
ro.mot.hw.HAC=1
ro.mot.eri=1
ro.mot.bindervm.config=158
ro.mot.setuptype=2
ro.mot.internalsdcard=1
ro.mot.dpmext=true
ro.mot.mynet=false
ro.mot.hidden_keyboards=evfwd
ro.mot.hw.uaprof=http://uaprof.motorola.com/phoneconfig/MotoMB200/profile/MotoMB200.rdf
# Enable/disable stagefright (camera, camcorder, etc)
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
# Media encode/camera values
ro.media.enc.aud.fileformat=qcp
ro.media.enc.aud.codec=qcelp
ro.media.enc.aud.bps=13300
ro.media.enc.aud.ch=1
ro.media.enc.aud.hz=8000
ro.media.camcorder.720p=mp4,h264,30,12000000,aac,128000,44100,2
ro.media.camcorder.d1NTSC=mp4,h264,30,6000000,aac,128000,44100,2
ro.media.camcorder.vga=mp4,h264,30,4000000,aac,128000,44100,2
ro.media.camcorder.cif=mp4,h264,30,1500000,aac,128000,44100,2
ro.media.camcorder.qvga=mp4,h264,15,500000,aac,32000,16000,2
ro.media.camcorder.mms=3gp,h264,15,128000,amrnb,12200,8000,1
ro.media.camcorder.mmsres=qvga
ro.media.camera.focal=3378.6,3378.6
ro.media.camera.principal=1632.0,1224.0
ro.media.camera.skew=0.0
ro.media.camera.distortion=0.0,0.0,0.0,0.0,0.0
ro.media.camera.calresolution=3264,2448
ro.media.capture.shuttertone=1
ro.camcorder.zoom=true
ro.camcorder.videoModes=false
# Set date format to American date format
ro.com.android.dateformat=MM-dd-yyyy
# Disable data roaming to kill overages
ro.com.android.dataroaming=false
# Android Setup Wizard options
ro.setupwizard.enable_bypass=1
ro.setupwizard.enterprise_mode=1
# ENABLED, OPTIONAL, DISABLED
ro.setupwizard.mode=DISABLED
# Set legal options
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
# Set Android default BT name
net.bt.name=Android
# Attempt to keep ADB root
ro.sys.atvc_allow_netmon_usb=0
ro.sys.atvc_allow_netmon_ih=0
ro.sys.atvc_allow_res_core=0
ro.sys.atvc_allow_res_panic=0
ro.sys.atvc_allow_all_adb=1
ro.sys.atvc_allow_all_core=0
ro.sys.atvc_allow_efem=0
ro.sys.atvc_allow_bp_log=0
ro.sys.atvc_allow_ap_mot_log=0
ro.sys.atvc_allow_gki_log=0
# Attempt to make ADB constant
persist.service.adb.enable=1
# ----------------------------------------
# BEGIN OS OPTIMIZATIONS
# ----------------------------------------
# Tweak APP_ADJ parameters
ro.FOREGROUND_APP_ADJ=0
ro.VISIBLE_APP_ADJ=1
ro.PERCEPTIBLE_APP_ADJ=1
ro.HEAVY_WEIGHT_APP_ADJ=2
ro.SECONDARY_SERVER_ADJ=2
ro.BACKUP_APP_ADJ=2
ro.HOME_APP_ADJ=0
ro.HIDDEN_APP_MIN_ADJ=7
ro.CONTENT_PROVIDER_ADJ=14
ro.EMPTY_APP_ADJ=15
# Tweak APP_MEM parameters
ro.FOREGROUND_APP_MEM=2560
ro.VISIBLE_APP_MEM=4096
ro.PERCEPTIBLE_APP_MEM=4096
ro.HEAVY_WEIGHT_APP_MEM=4096
ro.SECONDARY_SERVER_MEM=6144
ro.BACKUP_APP_MEM=6144
ro.HOME_APP_MEM=6144
ro.HIDDEN_APP_MEM=10240
ro.CONTENT_PROVIDER_MEM=11264
ro.EMPTY_APP_MEM=12288
# Tweak net speed
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4093,26280,35040,4096,16384,35040
# Tweak 3g speed
ro.ril.hsxpa=2
ro.ril.gprsclass=32
ro.ril.hep=1
ro.ril.hsdpa.category=28
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=268449905
ro.ril.hsupa.category=9
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
ro.ril.enable.sdr=1
ro.ril.enable.gea3=1
ro.ril.enable.fd.plmn.prefix=23402,23410,23411
ro.ril.disable.power.collapse=0
ro.ril.enable.a52=0
ro.ril.enable.a53=1
ro.ril.enable.dtm=1
Click to expand...
Click to collapse
Happy to see this!
...but it says "Invalid Attachment specified. If you followed a valid link, please notify the administrator" when clicking the attached file.
donlad said:
Happy to see this!
...but it says "Invalid Attachment specified. If you followed a valid link, please notify the administrator" when clicking the attached file.
Click to expand...
Click to collapse
Might need to refresh the page. I will make some mirrors.
Refreshing did the trick.
Can we just replace the build.prop that we have and reboot and voila?
donlad said:
Refreshing did the trick.
Can we just replace the build.prop that we have and reboot and voila?
Click to expand...
Click to collapse
Yes, you can
adb push build.prop /sdcard-ext/
adb shell
adb su
mount -o remount,rw /dev/block/mmcblk0p12 /system
cp /sdcard-ext/build.prop /system
chmod 644 /system/build.prop
chown 0.0 /system/build.prop
reboot
Click to expand...
Click to collapse
I'll make a BSR flashable zip... that would be easier eh
navenedrob said:
I'll make a BSR flashable zip... that would be easier eh
Click to expand...
Click to collapse
Yes please!
navenedrob said:
Yes, you can
I'll make a BSR flashable zip... that would be easier eh
Click to expand...
Click to collapse
Yes that would be easy. But could I extract the buildprop and just put it in system and set the other one to building.prop.bak? Possible? I would have to download right to my phone.
donlad said:
Yes please!
Click to expand...
Click to collapse
Ok, updated, try it out, let me know if you have success.
ashclepdia said:
Yes that would be easy. But could I extract the buildprop and just put it in system and set the other one to building.prop.bak? Possible? I would have to download right to my phone.
Click to expand...
Click to collapse
Sure, this is also another possible option.
navenedrob said:
Sure, this is also another possible option.
Click to expand...
Click to collapse
Freaking a I will be trying this tomorrow ..man I have a lot of options for tomorrow.
Now if I do this and then want to tweak something using v6 will I be okay or will there be a problem. I can't see there being a major problem..and I could also just change some values in the build.prop if I want to tweak also correct? This is pretty cool. Can't wait till tomorrow. Sucks I have to work or else I would be tweaking all day.
O yeah and I LOVE how you put in the descriptive lines. Nice touch
And b4 I forget ...the tweak network speeds. What type of results should I be expecting with these values? What is it going to be a major difference when I use speedtest?
navenedrob said:
Ok, updated, try it out, let me know if you have success.
Click to expand...
Click to collapse
Just flashed and it's booted. I have no service. No voice/data signal whatsoever.
EDIT: I rebooted again and signal has resumed.
navenedrob said:
Sure, this is also another possible option.
Click to expand...
Click to collapse
I download the file only version for just pushing into system directly from phone using root explorer? Sry just want to download the right one.
ashclepdia said:
I download the file only version for just pushing into system directly from phone using root explorer? Sry just want to download the right one.
Click to expand...
Click to collapse
That should work. Just make sure the permissions are set right.
navenedrob said:
That should work. Just make sure the permissions are set right.
Click to expand...
Click to collapse
Just to be certain I would be putting the right permission on it I just use the same settings as the permissions for my original build.prop?
They are bottom two in first column. Middle box in middle column. And bottom two in right column?
In the prop it has multi touch up to 4 points, but phone tester still only recognizes 2
Sent from my DROID X2
Thanks man. This has GREATLY improved my 3g speeds & I was running the 3g turbo script before. With this implemented, is there any benefit from running the v6 supercharger? I have both installed, along with all of the latest init.d tweaks & get no lag or redraw now. Gonna test music/video later.
Sent from my DROID X2 using XDA Premium App
garywojdan81 said:
Thanks man. This has GREATLY improved my 3g speeds & I was running the 3g turbo script before. With this implemented, is there any benefit from running the v6 supercharger? I have both installed, along with all of the latest init.d tweaks & get no lag or redraw now. Gonna test music/video later.
Sent from my DROID X2 using XDA Premium App
Click to expand...
Click to collapse
You are scaring me with all those scripts running that try to tweak the same thing at the same tine. Be careful one wrong button and you might end up having to sbf. Good luck hope it works out for ya
ashclepdia said:
You are scaring me with all those scripts running that try to tweak the same thing at the same tine. Be careful one wrong button and you might end up having to sbf. Good luck hope it works out for ya
Click to expand...
Click to collapse
Yeah I know. Getting ready to drop all the v6 stuff now. I'd rather run leaner & cleaner with something set specifically for this phone.
Update: Ok I dropped the v6 stuff after undoing the supercharge in script manager. The 3g tweaks disappeared when the build.prop was overwritten by navenedrob's file so all I'm running now are his tweaks in init.d & everything seems just as snappy. My major issue is with launcher redraws coming out pf sleep or exiting the phone.apk after ending a call. Gonna try this for awhile, so far so good though.
Sent from my DROID X2 using XDA Premium App
Ok I flashed the MOTOBLUR zip and the first time I rebooted all my services were fine does that mean its working? It feels just a tad bit faster but not sure if its actually working?
Sent from my DROID X2 using XDA App
almania6 said:
Ok I flashed the MOTOBLUR zip and the first time I rebooted all my services were fine does that mean its working? It feels just a tad bit faster but not sure if its actually working?
Sent from my DROID X2 using XDA App
Click to expand...
Click to collapse
Best way to check is to open up the build.prop from /system and see if it matches the one here. If it is there and the same then it worked
Hello everyone,
I was using VeganTab as my ROM of choice for a long time, and recently switched to CyanogenMod7 for a change and a more traditional Android feel.
With VeganTab, I had no issues using the Market. Every app I wanted to download was available in the market. Using CyanogenMod7, when I go to download apps I get a "this application is not available for your device" message on several apps. Firefox being one of them, which the gTablet should be able to support.
Why would one ROM work and the other doesn't on the same device? Has anyone else encountered this and know how to fix it?
Hello, I have one Gtab running CM7 what version/build are you on? Which apps are not showing up other than Firefox? Have you modified anything (build.prop)? If I remember right I had to modify the build.prop to get some apps to show up.
The apps in the market are set up to show only to devices that they are designed to be run on. When you change roms, your device shows up differently to the Market, so some apps might appear that weren't there before and some may dissappear. Read through the thread where you got the rom from and you may find some tips. Also as a temp. solution you can download the .apk files for many apps either to your PC or the the tablet and "side load" it (go to file manager and tap the downloaded .apk to install). Open a root file explorer and go to /system and open build.prop. Let me know what is says for product board, region and lcd density.
Thanks for the quick response Dave.
So far, Agenda Widget and Firefox are the two I can't get through the market. I haven't tried a ton of others yet.
I've been playing with the bool.prop file a little bit, based on tutorials I've seen here and at other forums. This thread seems to offer the best advice, but didn't work for me.
Below are my build.prop values at current time:
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GRI40
ro.build.display.id=GRI40
ro.build.version.incremental=eng.cyanogenmod.20110505.210139
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.3
ro.build.date=Thu May 5 21:02:03 CDT 2011
ro.build.date.utc=0
ro.build.type=user
ro.build.user=cyanogenmod
ro.build.host=scout73
ro.build.tags=test-keys
ro.product.model=GTablet
ro.product.brand=passion
#ro.product.brand=nvidia
ro.product.name=passion
#ro.product.name=harmony
ro.product.device=olympus
#ro.product.device=harmony
ro.product.board=harmony
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=malata
ro.product.locale.language=mdpi
ro.product.locale.region=
ro.wifi.channels=
ro.board.platform=tegra
# ro.build.product is obsolete; use ro.product.device
ro.build.product=harmony
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=passion-user 2.3.3 GRI40 102588 release-keys
ro.build.fingerprint=nvidia/harmony/harmony/harmony:2.2/FRF91/20101123.172729:eng/test-keys
# end build properties
#
# system.prop for harmony
#
# density in DPI of the LCD of this board. This is used to scale the UI
# appropriately. If this property is not defined, the default value is 160 dpi.
# Density set to 161 to allow market to function properly
ro.sf.lcd_density=161
wifi.interface = wlan0
# Time between scans in seconds. Keep it high to minimize battery drain.
# This only affects the case in which there are remembered access points,
# but none are in range.
wifi.supplicant_scan_interval = 45
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version = 131072
# This is a high density device with more memory, so larger vm heaps for it.
dalvik.vm.heapsize=32m
# For emmc phone storage
ro.phone_storage = 1
# Add external mount points
ro.additionalmounts=/mnt/emmc;/mnt/usbdisk
# Add reference RIL
rild.libpath=/system/lib/libreference-ril.so
rild.libargs=-d /dev/ttyS0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
ro.setupwizard.enable_bypass=1
keyguard.no_require_sim=1
keyguard.no_require_sim=true
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.rommanager.developerid=cyanogenmod
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.config.ringtone=Playa.ogg
ro.config.notification_sound=regulus.ogg
ro.config.alarm_alert=Alarm_Beep_03.ogg
ro.modversion=CyanogenMod-7.0.3-Harmony
ro.setupwizard.mode=OPTIONAL
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Looks from your build.prop file that you are on an older build of CM7. The apps you mentioned, Firefox and Firefox Beta, and the Agenda Widget show up and work on mine. You could try using some of the values in my .prop file here, or update to a newer version of CM7. You might be able to install over your current build without wiping your data, but back up first of course.
Thanks Dave. Can you link me to a stable, updated version of CM7?
There is a CM7 rom hosted here at XDA:
CYANOGENMOD7.2.0-RC0-BUILD98-REPACK
Or you can go to Cyanogenmod Wiki. Don't forget to download the Gapps separately from the bottom of the same page and install them too.
I apologize in advance if it is not allowed to post a link to their wiki page .
Actually I have had this problem ALOT, no matter what version of CM7 I use on it. Its even worse when the new Market gets pushed to it, I usually have to downgrade it back and remove the MarketUpdater.apk so it stays on the old one.
I am running the ICS Alpha/Beta (forget which) right now so everything works, albeit very slow.
I had the same issue it's the odd LCD density of 161 that market doesn't like. I changed mine to 200 then do the standard market fix reboot and it should be fine.
Sent from my HTC Glacier using xda premium
hey guys..
i am a big big bigx9999999 fan of RR3.. but no matter what all roms and kernels i try, it keeps on crashing even before it starts..
any help will be greatly appreciated..
i am ready to install any rom/kernel/mods/governers..etc
CURRENT DEVICE - XPERIA U ST25i
flash stock ics flash any kernel you wanna disable apps that you are not using. Change dalvik vm heapsize to 256 mb enable and enable jit and have fun!:good:
ANRDH said:
hey guys..
i am a big big bigx9999999 fan of RR3.. but no matter what all roms and kernels i try, it keeps on crashing even before it starts..
any help will be greatly appreciated..
i am ready to install any rom/kernel/mods/governers..etc
CURRENT DEVICE - XPERIA U ST25i
Click to expand...
Click to collapse
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
dalvik.vm.lockprof.threshold=500
dalvik.vm.heapminfree=2
dalvik.vm.heapmaxfree=14m
dalvik.vm.dexopt-flags=v=a,o=v,u=y,m=y
persist.android.strictmode=0
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
ro.config.nocheckin=1
ro.compcache.default=0
dalvik.vm.checkjni=0
dalvik.vm.dexopt-data-only=1
dalvik.vm.verify-bytecode=false
dalvik.vm.jmiopts=forcecopy
debug.kill_allocating_task=0
ro.ext4fs=1
dalvik.vm.heaputilization=0.25
dalvik.vm.heaptargetutilization=0.75
Try this guys, it's working..
Don't forgot to uninstall useless app from system app. :angel::angel::angel:
what do u mean by "enable jit"???
chessmanyaki said:
flash stock ics flash any kernel you wanna disable apps that you are not using. Change dalvik vm heapsize to 256 mb enable and enable jit and have fun!:good:
Click to expand...
Click to collapse
what do u mean by "enable jit"????
ANRDH said:
what do u mean by "enable jit"????
Click to expand...
Click to collapse
just in time compiler add this line to build.prop
dalvik.vm.execution-mode=int:jit
chessmanyaki said:
just in time compiler add this line to build.prop
dalvik.vm.execution-mode=int:jit
Click to expand...
Click to collapse
k.. thanx
Hey XDA forums, I have a Coolpad Catalyst that I'd like to be able to fix. The cause of my problem would be the firmware, I used KingRoot for a clean root and it was nice until I got the second lock screen overlay which was annoying. As well as a fast charge through KingRoot? Lol, what? Anyways I used SuperSU as a alternative and it suggested that I used SuperSU-me so I installed and ran that which would hide and "uninstall" KingRoot. I think because SuperSU was not yet supportive of my phone me uninstalling KingRoot bricked the firmware. I now can boot to the MetroPCS logo screen or recovery. I wiped the data/factory reset as well as wiped the cache partition. I have the option to reboot system now, reboot to bootloader, power down, apply update from sd card or adb.
Android System Recovery <3e>
5.1.167.10.p2.160504.LMY47V.MPCS .... <-- I believe this is the stock ROM name or firmware.
Volume up/down to move highlight; enter button to select.
-reboot system now
-apply update from ADB
-wipe data/factory reset
-wipe cache partition
-reboot to bootloader
-power down
-view recovery logs
-apply update from sd card
I'm going to MetroPCS shortly to see if they will be able to fix it or flash it. I could see a fresh flash fixing it but no one has yet to post a fix. If you need any information such as the signature for the ROM please let me know. I greatly appreciate any fix.
Extra Information: OS Build
KERNEL: Linux version 3.10.49-g3523c12-00131-gfd2b782 ([email protected]) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Wed May 4 17:05:22 CST 2016
CODENAME: REL
Mainboard: cp3622a
BRAND: Coolpad
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: cp3622a
DISPLAY: 5.1.167.10.P2.160504.LMY47V.MPCS
FINGERPRINT: Coolpad/cp3622a_mpcs/cp3622a:5.1.1/LMY47V/1670845:user/release-keys
HARDWARE: qcom
ID: LMY47V
TAGS: release-keys
Extra Information: Build.prop
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=LMY47V
ro.build.display.id=5.1.167.10.P2.160504.LMY47V.MPCS
ro.build.version.incremental=1670845
ro.build.version.sdk=22
ro.build.version.codename=REL
ro.build.version.all_codenames=REL
ro.build.version.release=5.1.1
ro.build.version.security_patch=2016-03-01
ro.build.version.base_os=
ro.build.date=Wed May 4 16:53:40 CST 2016
ro.build.date.utc=1462352020
ro.build.type=user
ro.build.user=mine
ro.build.host=ubuntu
ro.build.tags=release-keys
ro.build.flavor=cp3622a-user
ro.product.model=Coolpad 3622A
ro.product.bluetooth.name=
ro.product.brand=Coolpad
ro.product.name=cp3622a_mpcs
ro.product.device=cp3622a
ro.product.board=cp3622a
# ro.product.cpu.abi and ro.product.cpu.abi2 are obsolete,
# use ro.product.cpu.abilist instead.
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.cpu.abilist=armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=
ro.product.manufacturer=Coolpad
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8909
# ro.build.product is obsolete; use ro.product.device
ro.build.product=cp3622a
# Do not try to parse description, fingerprint, or thumbprint
ro.build.description=cp3622a-user 5.1.1 LMY47V 1670845 release-keys
ro.build.fingerprint=Coolpad/cp3622a_mpcs/cp3622a:5.1.1/LMY47V/1670845:user/release-keys
ro.build.characteristics=default
# end build properties
#
# from device/yulong/cp3622a/system.prop
#
#
# system.prop for msm8909
#
#rild.libpath=/system/lib/libreference-ril.so
rild.libpath=/system/vendor/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
# Start in cdma mode
ro.telephony.default_network=9
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=dyn
debug.hwc.dynThreshold=2.5
debug.mdpcomp.logs=0
dalvik.vm.heapsize=36m
dalvik.vm.zygotemaxfailedboots=5
dev.pm.dyn_samplingrate=1
persist.demo.hdmirotationlock=false
#enable dirty rect
debug.sf.swaprect=1
#enable app buffer composition
debug.sf.hwc.canUseABC=1
#enable gpu perf hint
sys.hwc.gpu_perf_mode=1
#ro.hdmi.enable=true
#tunnel.decode=true
#tunnel.audiovideo.decode=true
#lpa.decode=false
#lpa.use-stagefright=true
#persist.speaker.prot.enable=false
#
# system props for the cne module
#
persist.cne.feature=1
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
media.aac_51_output_enabled=true
#codecsPARSER_)AAC AC3 AMR_NB AMR_WB ASF AVI DTS 3GP 3G2 MKV MP2PS MP2TS MP3 OGG QCP WAV FLAC
mm.enable.qcom_parser=262143
# Default to AwesomePlayer
media.stagefright.use-awesome=false
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.netmgrd.qos.enable=true
persist.data.mode=concurrent
#system props for time-services
persist.timed.enable=true
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
# System property for cabl
ro.qualcomm.cabl=2
# System property for QDCM
persist.tuning.qdcm=1
# System property for Screen Color
ro.qcom.screencolor=1
#
# System props for telephony
# System prop to turn on CdmaLTEPhone always
telephony.lteOnCdmaDevice=1
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
#
# System property for Camera
# System prop to allocate Reprocess buffer as "1"
# during Longshot usecase
persist.camera.longshot.stages=1
#
# dirty ratio value when enable ums
#
ro.sys.umsdirtyratio=20
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=fluence
persist.audio.fluence.voicecall=true
persist.audio.fluence.voicerec=false
persist.audio.fluence.speaker=false
#Set for msm8909
tunnel.audio.encode = false
ro.config.low_ram=false
#Buffer size in kbytes for compress offload playback
audio.offload.buffer.size.kb=64
#Minimum duration for offload playback in secs
audio.offload.min.duration.secs=30
#Enable offload audio video playback by default
av.offload.enable=true
#enable voice path for PCM VoIP by default
use.voice.path.for.pcm.voip=true
#
#System property for FM transmitter
#
ro.fm.transmitter=false
#enable dsp gapless mode by default
audio.offload.gapless.enabled=true
#Audio voice concurrency related flags
voice.playback.conc.disabled=true
voice.record.conc.disabled=true
voice.voip.conc.disabled=true
#Audio VoIP / playback record concurrency flags
rec.playback.conc.disabled=true
#Set composition for USB
# persist.sys.usb.config=diag,serial_smd,rmnet_qti_bam,adb
#Set read only default composition for USB
ro.sys.usb.default.config=none
# set max background services
ro.config.max_starting_bg=8
#property to enable user to access Google WFD settings
persist.debug.wfd.enable=1
#propery to enable VDS WFD solution
persist.hwc.enable_vds=1
#property to enable image unload by audio HAL
sys.audio.init=false
#property to enable DS2 dap
audio.dolby.ds2.enabled=true
#property to change touch screen resolution
persist.sys.synaptics_dsx.qhd=false
#HWUI properties
ro.hwui.text_large_cache_height=2048
# enable sta proxy bydefault
persist.mm.sta.enable=1
#Trim properties
ro.sys.fw.use_trim_settings=true
ro.sys.fw.empty_app_percent=50
ro.sys.fw.trim_empty_percent=100
ro.sys.fw.trim_cache_percent=100
ro.sys.fw.trim_enable_memory=1073741824
# set cutoff voltage to 3200mV
ro.cutoff_voltage_mv=3200
#min/max cpu in core control
ro.core_ctl_min_cpu=2
ro.core_ctl_max_cpu=4
#Enable B service adj transition by default
ro.sys.fw.bservice_enable=true
ro.sys.fw.bservice_limit=5
ro.sys.fw.bservice_age=5000
#set device emmc size
ro.emmc_size=8GB
#set the density
ro.sf.lcd_density=240
#enable Ycbcr WNR for camera
persist.denoise.process.plates=0
#enable fastdormancy
persist.env.fastdorm.enabled=true
persist.fd.scroff.timer=2500
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.yulong.version.hardware=P2
ro.yulong.version.btloader=1.01.001.10.P2.160504.LMY47V.MPCS
ro.yulong.version.kernel=3.10.49.10.P2.160504.LMY47V.MPCS
ro.yulong.version.software=5.1.167.10.P2.160504.3622A-MPCS
ro.yulong.version.release=5.1.167.P2.160504.3622A-MPCS10
ro.config.ringtone=Electronical.ogg
ro.config.alarm_alert=Nocturne.ogg
ro.com.google.clientidbase.ms=android-metropcs-us
ro.com.google.clientidbase.am=android-metropcs-us
ro.yulong.version.tag=LC
persist.sys.ssr.restart_level=adsp,venus,modem,wcnss
persist.sys.bugreport.enable=0
persist.sys.bugreport.senddata=0
ro.config.notification_sound=Proxima.ogg
drm.service.enabled=true
keyguard.no_require_sim=true
ro.com.google.clientidbase=android-coolpad
ro.com.google.clientidbase.yt=android-coolpad
ro.com.google.clientidbase.gmm=android-coolpad
ro.com.android.dataroaming=false
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.vendor.extension_library=libqti-perfd-client.so
persist.radio.apm_sim_not_pwdn=1
persist.radio.sib16_support=1
persist.radio.custom_ecc=1
ro.frp.pst=/dev/block/bootdevice/by-name/config
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=96m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=512k
dalvik.vm.heapmaxfree=8m
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=5.1_r3
ro.yulong.version.audiogsm=CP3622A_GSM_20160407
ro.yulong.version.audiowcdma=CP3622A_WCDMA_20160407
ro.yulong.version.audiolte=CP3622A_LTE_20160407
persist.sys.dalvik.vm.lib.2=libart.so
dalvik.vm.isa.arm.features=div
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
persist.gps.qc_nlp_in_use=1
persist.loc.nlp_name=com.qualcomm.location
ro.gps.agps_provider=1
ro.pip.gated=0
persist.radio.calls.on.ims=0
persist.radio.jbims=0
persist.radio.csvt.enabled=false
persist.radio.rat_on=combine
persist.radio.mt_sms_ack=20
import /system/vendor/default.prop
import /system/vendor/vendor.prop
import /system/vendor/power.prop
[UPDATE]
So I took my phone to MetroPCS and they tried to wipe the data/factory reset and cache partition which I had done numerous times prior with no success in unbricking the phone. Luckily because it was within 30 days of buying the phone they replaced it for free but will take 3-5 business days, so I would suggest doing that for now to others. As soon as I get my new phone I will be trying to copy the stock ROM and upload it here (if thats possible but I would believe so.)
For those who don't know if you come across a stock ROM for this device you may need to used ADB as a way to install the firmware package to the phone, or the best way to do it would be by downloading a .zip containing the package files and applying the update from a sdcard.
-Volume Down + Power = Recovery Mode;
-Volume Down + Volume Up + Power = Power On w/ [OFFICIAL] captioned at the bottom above "Android";
Thanks bro
I just bought the Coolpad catalyst and bricked it or bootlooped it.Im gonna take the phone back up there and see what they can do.If I can get another Coolpad please give me the firmware.And what flash tool do u use to flash the coolpad.
coolpad catalyst 3622a
Download YGDP Tool (all versions) - Android MTK
this is the tool ..i got it to connect and COM..still i need just the correctfirmware to try.
Coolpad catalyst recovery
Larry3 said:
I just bought the Coolpad catalyst and bricked it or bootlooped it.Im gonna take the phone back up there and see what they can do.If I can get another Coolpad please give me the firmware.
I have the same phone and rooted it and made a firmware copy and recovery copy my email is [email protected] contact for copy
Click to expand...
Click to collapse
Just gonna put this out there so noobs can stop ruining their phones. If you hate the kingroot lock screen then disable it in the settings. Lol it's that simple.
jestin1914 said:
Larry3 said:
I just bought the Coolpad catalyst and bricked it or bootlooped it.Im gonna take the phone back up there and see what they can do.If I can get another Coolpad please give me the firmware.
I have the same phone and rooted it and made a firmware copy and recovery copy my email is [email protected] contact for copy
Click to expand...
Click to collapse
Post a copy of it here on XDA.. PLEASE!
Click to expand...
Click to collapse
Anyone can provide drivers for this phone post here thanks..
Sent from my SM-N930T using Tapatalk
^.^7
If someone posts a link on how to copy the rom/firmware I'll get it posted. I'm getting a catalyst tomorrow. Sorry I'm a bit of a newb.
[email protected] said:
If someone posts a link on how to copy the rom/firmware I'll get it posted. I'm getting a catalyst tomorrow. Sorry I'm a bit of a newb.
Click to expand...
Click to collapse
I need the drivers please post here thanks
Sent from my SM-N930T using Tapatalk
help
anyone can shared the firmware for that coolpad 3622a, i have one stuck on logo after root, please i dont found it
Firmware would be appreciated. :'(
Help
Please, if you have the rom pass to this email: [email protected]
JT man said:
I need the drivers please post here thanks
Sent from my SM-N930T using Tapatalk
Click to expand...
Click to collapse
same thing just happened to me ,,, how anyone found or shared a solution yet?
let me know what to do
i have this phoen adn its rooted with kingoroot. how do i get the rom off it so people can fix their phones that are stuck on teh logo screen? i actually have two of these phones and one of them is stuck on teh logo screen. i can get to the recovery screen where i assume i can put an update on a sdcard and fix it, i just need to know exactly how to get what i need off the working one to both post it to XDA and to put it on the that is stuck on the logo screen.
has anybody had any luck finding the firmware for this phone? i installed kingroot and inseterted supersu .. went good . rebooted and everything fine two days later rebooted my phone and it stuck on the boot screen . ive flashed hundreds of phones but i need the firmware. thankks in advance
looking for rom
I have a coolpad catalyst and I am wondering if anyone has a rom for this phone
unbrick 3622a
I have a zipped tutorial that contains everything needed to bring a 3622a back from the grave I am trying to figure out how to post it here. I will figure this out, and there is definitely a way to fix the 3622a. I have done completely restored mine.
lehmancurtis said:
I have a zipped tutorial that contains everything needed to bring a 3622a back from the grave I am trying to figure out how to post it here. I will figure this out, and there is definitely a way to fix the 3622a. I have done completely restored mine.
Click to expand...
Click to collapse
if you could send that file to me [email protected] thatd be greatly appreciated
lehmancurtis said:
I have a zipped tutorial that contains everything needed to bring a 3622a back from the grave I am trying to figure out how to post it here. I will figure this out, and there is definitely a way to fix the 3622a. I have done completely restored mine.
Click to expand...
Click to collapse
I'll trade you my first born if you could please pretty please send me a copy as well.... [email protected]