Hi probably not many will take advantage of this app, but it is definitely adding some functionality to WM which normally this system is lacking. Mods please conciser that this topic is not about networking using this program but translating the program (hacking exe file) so in my opinion it should be in this section.
What is it for? PPPoE is an application to connect to wifi network with Point-to-Point Protocol over Ethernet authentication. http://en.wikipedia.org/wiki/Pppoe
There is no other application like that for Windows Mobile, at least I could not find it The only one that exists is made by NTT DOCOMO in Japan and is in Japanese
http://flets.com/spot/pdasetup_download.html
Since I'm not a programmer and I simply cannot create application like that I decided to try to translate it to English with help from online Japanese to English translator and BeeGee_Tokyo who helped me by translating parts where online translation failed THANK YOU!
How to start:
Install PPPoE.cab file on your device, it will create folder inside program files, name of the folder is in Japanese and if you are using wwe version you will see squares, you can safely rename this folder to PPPoE or whatever you want, the same with original exe file (you can delete it if you want). Please put my modified exe inside this folder (it is in PPPoE.zip file). I'm testing this program on my Topaz with WM6.1 TESS 2.2.1 but program might be device and system specific so it might not work on your device at all. You can also change .lnk file inside \windows\start menu\programs to correspond exe file name change.
Things left to do:
- translate last missing bits if possible,
- find a way to create a cab file with embedded translated exe, till now MSCEinf and WinCECabManager are unable to help me with that anyone can help?
- test the program in real life environment PPPoE authentication over wifi (I don't have access to such network at the moment) and on what devices it works.
UPDATE - Probably final translation, corrected some minor mistakes, still I can't find a way to translate one error page and about page but program is fully functional now, have fun.
Translation
I am sure this is not perfect, but it should be good enough to understand the program.
Most of the translation is done by Google I just corrected grammar a little bit and translated Katakana words, where Google usually fails.
Thank you BeeGee I corrected most of the problem I had with online translation thanks to you so program is ready, I will apply some minor changes and upload final version soon.
It doesn't work on my i780 even if i rename it like the japanese one (wich works)
I think it is some kind of problem with certificates or security policies or signing of the program, I'll investigate this and will let you know.
certificate error
shamus said:
I think it is some kind of problem with certificates or security policies or signing of the program, I'll investigate this and will let you know.
Click to expand...
Click to collapse
Hi!
I need this program because my adsl "router" (of Telecom Italia) have locked configuration..
I have htc touch pro with original Rom 5.05.408.1 ITA and when I launch your translated program, Windows return a certificate error!
mmmh I have question for you..
Can you create a PDF with screenShot in English and japanese for each window, so we can use the japanese version?
thank you very much!
bye!
Any news? At least, can you post screenshot of yours so we can use the japanese one?
Stuck at PPPoE AC discovery search
Well, I tried this program and ran it successfully. I entered all the necessary info n also changed the MAC as required using mtty. But when i connect it says connecting and gets stuck at PPPoE AC discovery search. I can connect with my notebook without any problem over wifi.
Anyone has any idea about it? anyone successful?
Chinese client ???
In search of PPPoE client I saw this chinese forum. They have mentioned a lot about registry editing as well. However I cudnt download the file they hav mentioned. If any kind soul can download and post the file along with proper instructions here it will be very helpful for guys like us....
http://bbs.pdafans.com/viewthread.php?tid=429157
google translate:
http://translate.google.com/translate?hl=en&sl=zh-CN&u=http://bbs.pdafans.com/viewthread.php%3Ftid%3D429157&ei=VVnVSvvjNoP06gOU3vmzAg&sa=X&oi=translate&resnum=10&ct=result&ved=0CCgQ7gEwCTge&prev=/search%3Fq%3Dpppoe%2Bin%2Bppc%26hl%3Den%26sa%3DN%26start%3D30
Another one is here:
http://bbs.pdafans.com/thread-431092-1-2.html
google translate:
http://translate.googleusercontent....le.com&usg=ALkJrhhjMBmee_s-HlEMBhEEbOJtCfSkNw
http://rapidshare.com/files/292887833/PPPoE.rar
Here's the file
Edit: and here's the file in the 2nd link you provided
http://rapidshare.com/files/292895209/PPPOE_2_.rar
Re-edit:
I installed the cab in the 2nd link, i succesfully (erm..) configured the registry and the pppoe.txt but when i try to start the connection i get a "Error from RasDial" error...
I succeded in getting your exe working, you only need to remove the signature. I used this tool http://rapidshare.com/files/300851964/1206597606_72079e82.zip
please post a working file here.... thanx in advance
This one works for me
Greattt!!!
hey that's great.. u got the working file!!!!!! I wish i cud try but unfortunately I'm out of my town so cant test ur file Will do it once i'm back....
@baiggee2, Can u pls post ur findings??
Thanks guys!!!!
yythanks very much
Hi all.
I can't get it to work with my mobile cel. The program works, it connects successfully, but i can't use any browser. The "PPPoE adapter" it's "not connected" and without any IP assigned....
any help? Does this program works for you?
TIA
Buddies, i have tried and connects succesfully but still i cant surf the internet here is what i have done previously on my HTC S620:
1>Installed original cab file
2>Extracted Translated file on SD card
3>Then I edited the registery settings
3.1>Go to HKLEM>>Comm>>NTTPPPoE>>PDAConTool>>SSIDList
3.2>Create a Key Folder Name "Item02"
3.3>Create "DWord" Value Name It As "Spot" And Change The Value to "3"
3.4>Create "String" Value Name It As "SSID" And Change Its Value To Your Current Router "SSID"
4>Now Change The AP Connection Settings In PPPoE Application To Your Router "SSID" Created. (See The Pic Below)
5>These Steps are Neccesary Becoz This Application only allows users to connect only NTT-West And Fletspot Users. If You Change Your Router "SSID"
To "Fletspot" Or "NTT-West" It Will Not Work Becoz If You See Its Registry Settings It Contains "Encryption Mode" And "Encryption Key" Strings Too Which We Donot Know.
6>Finally, It Connects Me Successfully But Still It Cant Find The Way To Surf Net!
PPPOE Connection for C905 mobile
Dear all,
I am looking for aan PPPOE application for c905 mobile phone. I am not getting internet connection as soon as connected to WiFi even in laptop. I have to connect the PPOE connection. So I need same for mobile also...
Please help me...please
ilMessia said:
This one works for me
Click to expand...
Click to collapse
it didn't work for e. it says stop services, then a window appear that say restart to make changes! then when I tap on ok, it restart and nothing happen!
it didn't install any thing. I run it in my diamond2 wm6.5.
from where I can access the pppoe settings?!?!!
baiggee2 said:
Buddies, i have tried and connects succesfully but still i cant surf the internet here is what i have done previously on my HTC S620:
1>Installed original cab file
2>Extracted Translated file on SD card
3>Then I edited the registery settings
3.1>Go to HKLEM>>Comm>>NTTPPPoE>>PDAConTool>>SSIDList
3.2>Create a Key Folder Name "Item02"
3.3>Create "DWord" Value Name It As "Spot" And Change The Value to "3"
3.4>Create "String" Value Name It As "SSID" And Change Its Value To Your Current Router "SSID"
4>Now Change The AP Connection Settings In PPPoE Application To Your Router "SSID" Created. (See The Pic Below)
5>These Steps are Neccesary Becoz This Application only allows users to connect only NTT-West And Fletspot Users. If You Change Your Router "SSID"
To "Fletspot" Or "NTT-West" It Will Not Work Becoz If You See Its Registry Settings It Contains "Encryption Mode" And "Encryption Key" Strings Too Which We Donot Know.
6>Finally, It Connects Me Successfully But Still It Cant Find The Way To Surf Net!
Click to expand...
Click to collapse
Hi I was not looking at this tread for a while, all registry changes are completly unnecessary if program is working. Of course you need to setup new connection with your own network instead of Fletspot or NTT-West. How to do it? Just click menu/new network and that is it, you can add your own network but to do it of course you need to know login and password, that's how PPPoE works, if you don't know it than this program will not help you in any way to create connection.
want to create an app to generate a qr code in the phone itself without connecting to internet..it should be having 3 details..name,phone no,email-id...ny source code or nythng to help me out ..this is my first app .
You want to create such an app? Than you have to start coding I guess, if you dont know how to code it, search for information on the web. Starting with:
http://en.wikipedia.org/wiki/QR_Code
http://www.denso-wave.com/qrcode/qrfeature-e.html
A hint: You have to know what you're doing when you want to code something. So if you don't know how to create an QR-Code, than you can't develop an app. Makes sense right?
EDIT
I use these sites to generate my qrcodes:
http://qrcode.kaywa.com/
http://goqr.me/de/
Hi, before all, sorry for my poor English.
I have buyed a new Android Watch; the SmartWatch U8. I have found many Android app to run it but nothing have great result.
After few test and search I have found the original APK for my watch, is run good but have some problems and I want improve it.
I have decompiled the APK (APK to ZIP, dex2jar and APK Tool), I have now some .jar files, the .manifest and few assets and others ressources.
Using Android Studio, I have tried to recompile, without modification of code. I have many, many errors.
Some errors is about depriciated, others is for unknown command or class.
I have tried to fix, but no chance, too many errors and my Java skill is realy low (I'm better under PHP). I have also try to copy only few codes using the error tools to known what is needed to add, but I don't known own the default structure was made (all class in same folder ?, or many folder for many class ? less class but with more actions ? not sure)
I have tried all ideas I have found, no valid result, I never build the app with success. I have made few Android App, with help of tutorials and are very basic (Web browser for my website, music player and scanner). I known the basic of Android coding and the new and old way to code them (Eclipse and Android Studio).
I search many solutions;
- [easy] Find another app with all (or the most) of needed change I want; hide the notification text but keep the icon when connected, more control of what is sending to watch (keep notice of call, but not make/answer call over the watch)
- [medium/hard] Find a good tutorial/guide for rebuild a Android app from decompiled APK.
- [hard] Build from scratch a Android app for my watch (with tutorial/guide)
The APK I try to edit: levelkro (dot) com/download/android/KHR1.3.22.apk (not available on Play Store)
Thank for your help
Greetings to all.
Someone knows how I can modify an application, adding auto filling of user and password. That is to say that when the application will be logged in automatically with the account that will be preloaded in the code of the application.
I already have the smali files, and the login path, but I do not know how to modify it. I would be glad if they pass me some tutorial to be able to do it, or if someone is encouraged to help me.
Thanks in advance.
dear community i hope everyone are doing fine, so am gonna go straight to the point
i have a Magisk on both mobile and emulator with all important plugins installed + Frida well installed + many http interceptors + installed the http interceptors certificates in the root ...
- now i have a game that i want to mod and i want to explore as well. the problem is i spent the last 4 days decompiling it and reading it's source code and i couldn't find any urls i even tried using frida to bypass the ssl pinning and i did bypass the ssl pinning and the root detection and still no links and when i use burpsuite the game show other links that has no relation to the game api.
also to mention that when i use this tool HTTP Toolkit and i setup the tool with adb to intercept the calls the game says that the connection to the server is lost and game freezes .
i tried every possible solution before coming here trust me and the last thing is i found these errors in the output from frida which i couldn't find in the source code because there is no functions named
HTTP.SecureProtocol.Org.BouncyCastle.X509.Store
BestHTTP.SecureProtocol.Org.BouncyCastle.Crypto.Tls
......................................
now my question is : can someone give me any idea on how to get the requests without letting the game freezes
another question : if the links aren't present in the apk source code from where the tool is getting those links to perform the api calls
third question : is this has any relation with libraries .so ?
-----------------------
Game Url : https://play.google.com/store/apps/details?id=com.lockwoodpublishing.avakinlife&hl=en&gl=US
------------------------
i hope i can get some help from your guys and thanks in advance ^^
up