Please help me. My HTC One M9 sprint is:
LOCKED and S-OFF.
My phone got bootloop, i CAN enter to Bootloader but UNAble to enter Download mode or Recovery mode :crying::crying:.
Here is the information i got in Bootloader. Can someone help me on this problems :crying:.
Tks a lot:angel::angel:
Code:
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) max-download-size: 0x20000000
(bootloader) partition-type:cache: ext4
(bootloader) partition-size:cache: 0x14000000
(bootloader) partition-type:userdata: ext4
(bootloader) partition-size:userdata: 0x5e0000000
(bootloader) partition-type:system: ext4
(bootloader) partition-size:system: 0x118000000
(bootloader) serialno: HT58xxxxxxxx
all:
finished. total time: 0.097s
Pls someone help me
Replaces eMMC and restore dump into new one. I've done several case before
hoang555 said:
Replaces eMMC and restore dump into new one. I've done several case before
Click to expand...
Click to collapse
Wait, you mean you've replaced dead eMMCs before?
Then restore dump (dd, using fastboot, I assume) to all partitions?
What about with the partition creation itself?
How risky was it?
hoang555 said:
Replaces eMMC and restore dump into new one. I've done several case before
Click to expand...
Click to collapse
Cảm ơn bác nhé. Vậy phải ra tiệm à bác. Giá khoảng bao nhiêu ạ?
hoang555 said:
Replaces eMMC and restore dump into new one. I've done several case before
Click to expand...
Click to collapse
Cảm ơn bác nhé. Vậy phải ra tiệm à. Giá khoảng bao nhiêu vậy bác??
English please.
neko1pro said:
Cảm ơn bác nhé. Vậy phải ra tiệm à bác. Giá khoảng bao nhiêu ạ?
Click to expand...
Click to collapse
Tầm 500k ! Đà Nẵng mang máy gặp mình thực hiện
---------- Post added at 11:04 AM ---------- Previous post was at 11:03 AM ----------
shaqman89 said:
Wait, you mean you've replaced dead eMMCs before?
Then restore dump (dd, using fastboot, I assume) to all partitions?
What about with the partition creation itself?
How risky was it?
Click to expand...
Click to collapse
Backup full original one then restore to new one by special hardware box then everything will return
hoang555 said:
Backup full original one then restore to new one by special hardware box then everything will return
Click to expand...
Click to collapse
Is there a picture or link for what this hardware box is?
shaqman89 said:
Is there a picture or link for what this hardware box is?
Click to expand...
Click to collapse
Find here bro
https://xtc2.net/
Related
should i restore system and settings too or just apps and data?
i only have 20 apps that was on the sd card that gingerbreak formatted but i have about 150 items in system setting, should i restore these too? i know its not a different phone but 1.8.3 did change the android version to 2.2.2 so i dont know if that makes a difference.
I'll bump this as I'm curious as well.
neotekz said:
should i restore system and settings too or just apps and data?
i only have 20 apps that was on the sd card that gingerbreak formatted but i have about 150 items in system setting, should i restore these too? i know its not a different phone but 1.8.3 did change the android version to 2.2.2 so i dont know if that makes a difference.
Click to expand...
Click to collapse
I restored all settings as well as the apps and data since I didn't want to set them all up again. I guess it's "cleaner" to do it all again, but if you had the settings the way you wanted before, why not restore it?
quangquan93 said:
lắc bất tiện lắm ? hơi tí lạ bị tắt
Click to expand...
Click to collapse
Cái này chỉnh lắc mạnh hay nhẹ được mà, thích cái chế độ tắt các services chạy ngầm khi tắt màn hình
Sent from my LT26i using Tapatalk
duykhanhv2006 said:
mình cũng đồng ý với bác này
cầm trên tay mà còn sợ rớt nữa, nói chi lắc lắc, rớt 1 cái rồi khóc ra tiếng mán luôn
Click to expand...
Click to collapse
Dùng dt rớt là chuyện thường, mà rớt cái mà nói được cả tiếng mán thì cũng đáng =))
Sent from my LT26i using Tapatalk
here the link:
https://drive.google.com/file/d/0B1QRy4thJUMbbUNyUDlqWWwwSTA/view?pref=2&pli=1
File names: 0P3PIMG_T6_U_K44_SENSE60_MR_hTC_Asia_WW ... 01_release_395549_combined_signed_2.zip
How to use:
- Rename file name to 0P3PIMG.zip
- Copy to root of SD-card
- Reboot to boot-loader
- Press Volume up ( + ) to flash
- Just wait for 20 minutes
Have fun !
https://drive.google.com/file/d/0B1QRy4thJUMbbUNyUDlqWWwwSTA/view?pref=2&pli=1
..... drive.google.com/open?id=0B1QRy4thJUMbbUNyUDlqWWwwSTA&authuser=0
How to use:
- Rename file name to 0P3PIMG.zip
- Copy to root of SD-card
- Reboot to boot-loader
- Press Volume up ( + ) to flash
- Just wait for 20 minutes
Can gets update to 5.0.2
Today gets update OTA to 5.0.2 - 4.14.707.110
ha_sbv said:
Can gets update to 5.0.2
Today gets update OTA to 5.0.2 - 4.14.707.110
Click to expand...
Click to collapse
Can you please post a link for 4.14.707.110 firmware? Need to revert back to stock rom. TIA
https://drive.google.com/file/d/0B1QRy4thJUMbbUNyUDlqWWwwSTA/view?pref=2&pli=1
ha_sbv said:
https://drive.google.com/file/d/0B1QRy4thJUMbbUNyUDlqWWwwSTA/view?pref=2&pli=1
Click to expand...
Click to collapse
Same link as above and this file won't work on me
yes me too, i can't update with that file,..(my htc one max 803e boot only htc logo)
please help
version: 0.5
version-bootloader: 2.49.0000
version-baseband: 4T.36.3218.06
version-cpld: None
version-microp: None
version-main: 4.14.707.110
version-misc: PVT SHIP S-ON
serialno: FA3BSWG03104
imei: 357312050084381
meid: 00000000000000
product: t6u
platform: HBOOT-8064
modelid: 0P3P60000
cidnum: HTC__044
battery-status: good
battery-voltage: 3816mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-d0e3b226
hbootpreupdate: 11
gencheckpt: 0
upp anyone , please help
i need this file
0P3PIMG_T6_UL_L50_SENSE60_MR_hTC_Asia_WWE_4.13.707 .7_Radio_4T.36.32
18.06_10.33R.1718.01_release_436304_signed.zip
br
alif said:
i need this file
0P3PIMG_T6_UL_L50_SENSE60_MR_hTC_Asia_WWE_4.13.707 .7_Radio_4T.36.32
18.06_10.33R.1718.01_release_436304_signed.zip
br
Click to expand...
Click to collapse
+1
Sent from my SM-G920I using Tapatalk
Quincux said:
+1
Sent from my SM-G920I using Tapatalk
Click to expand...
Click to collapse
do you have sir?
alif said:
do you have sir?
Click to expand...
Click to collapse
No, I don't
Sent from my HTC_One_max using Tapatalk
0P3PIMG_T6_UL_L50_SENSE60_MR_hTC_Asia_WWE_4.13.707 .7_Radio_4T.36.32
18.06_10.33R.1718.01_release_436304_signed.zip
only in www.IR-file.com anybody help me to get that file
anyone have? that file
alif said:
anyone have? that file
Click to expand...
Click to collapse
https://drive.google.com/open?id=0B1QRy4thJUMbbUNyUDlqWWwwSTA
ha_sbv said:
https://drive.google.com/open?id=0B1QRy4thJUMbbUNyUDlqWWwwSTA
Click to expand...
Click to collapse
Why are you keep linking and posting the same file This
0P3PIMG_T6_U_K44_SENSE60_MR_hTC_Asia_WWE_3.24.707.102_Radio_4T.27.3218.14_10.33C.1718.01_release_395549_combined_signed_2.zip
is not working
alif said:
0P3PIMG_T6_UL_L50_SENSE60_MR_hTC_Asia_WWE_4.13.707 .7_Radio_4T.36.32
18.06_10.33R.1718.01_release_436304_signed.zip
only in www.IR-file.com anybody help me to get that file
Click to expand...
Click to collapse
We need to pay in order to download the stored file from there :crying:
safety1st said:
Why are you keep linking and posting the same file This
0P3PIMG_T6_U_K44_SENSE60_MR_hTC_Asia_WWE_3.24.707.102_Radio_4T.27.3218.14_10.33C.1718.01_release_395549_combined_signed_2.zip
is not working
Click to expand...
Click to collapse
I renamed that zip file 0P3PIMG_T6_U_K44_SENSE60_MR_hTC_Asia_WWE_3.24.707.102_Radio_4T.27.3218.14_10.33C.1718.01_release_395549_combined_signed_2.zip to 0P3PIMG_T6_U_K44_SENSE60_MR_hTC_Asia_WWE_3.24.707.102_Radio_4T.27.3218.14_10.33C.1718.01_release_395549_combined_signed_2.gz and then it will open :good: Now as for it working I have no idea cause I've not tested it yet but hope that helps.
Android oreo has been released! Dowanload below
I cant add links in the main post so read first comment
Download rom from here:
https://cloud.mail.ru/public/Fn6v/TtHv6jLcU
https://4pda.ru/pages/go/?u=http://merk.under.net.ua/A9100ZCU1BRK3_A9100CHC1BRK3_CHC.zip&e=83546284
Android oreo has been released! Gapps worked!
Inastllation1.Download ROM
2.flash ROM via odin https://samsungodin.com/
3.flash twrp via odin https://androidfilehost.com/?fid=457095661767135545
Go to twrp and Wipe-> Format Data-> yes, reboot to twrp without booting system and
4.Download and fllash https://zackptg5.com/downloads/Disable_Dm-Verity_ForceEncrypt_02.04.2019.zip
5.flash gapps from toman15 mediafire.com/file/u4wbcq02ngt55la/GAPPS800_HostEdited.zip/file
6.Flash magisk if you need root https://github.com/topjohnwu/Magisk/releases/download/v18.0/Magisk-v18.0.zip
7.Freeze from titaniumbackup or delete "com.samsung.android.sm.devicesecurity" and "com.samsung.android.securitylogagent" to evade bootloop after restart
Enjoy!
Please dont install csc file posted here, it may cause gps problems
How to fix Google Contacts Sync issue
Open Settings and navigate to Apps.
In Apps, select App Info and tap on the three dots at the top right corner and select Show system.
Now look for Contacts Storage
Open Contacts Storage, select Storage and then tap Clear Data.
And you need to give to "Contacts Storage" permissions to change contacts in permissions window
Fix samsung health
Install an app called build prop editor. There are a few of these app. All work the same. Then grant root access and edit this value
Ro.config.tima
From 1 to 0. Then restart the phone. Problem solved.
Apparently it tells the phone that nothing is tampered with.
Fix Mobile hotspot don't work (dont need, if you flash gapps from toman15)
remove all data in your /etc/hosts, except
Code:
127.0.0.1 localhost
::1 ip6-localhost
don't flash gapps package downloaded from opengapps
if you guys updated this gapps and stucked in the black screen you have to odin again. then wipe data and cache in stock recovery with power+home+v+ and wait 20 seconds to enter the wipe menu. then you have to odin TWRP again (https://forum.xda-developers.com/sa...wrp-3-0-2-1-samsung-galaxy-a9-pro-sm-t3426701) . enter the new TWRP recovery when odin processing finished. update Gapps 800.zip and magisk.zip( if you guy want to root your phones. you can find the lastest magisk.zip on google.) and the last step is wiping Dalvik cache in TWRP recovery, reboot your phones and wait minutes. so you can see some apps are gonna be fc. don't worry. log in google play and install link2sd or every other app can uninstall system apps. so you can remove what apps be fc.
link gapps: https://drive.google.com/file/d/1gx...EEDnpER62MPG1yIGdq54hHHdIQYzJ1WBv57n45dcJLbao
link magisk : https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
good luck!
------------------------------------------------------------------------------------------------------------------------------------------------
For Vietnamese People.
Những bạn nào đã cài Android 8 mà không có google apps thì đừng cài file tải từ opengapps về. Nó sẽ xuất hiện màn hình màu đen trong quá trình đăng nhập mà không có cách nào có thể dùng được.
Có nhiều bạn không biết là samsung không hoạt động với Google installer gì đó thì nhất quyết đừng tải mấy cái apk đó về cài chi cho mệt vì không thể dùng được.
Các bạn cài file mình vừa đem link ở trên bằng cách flash lại rom gốc 8.0 sau đó không cho máy khởi động lên mà nhấn tổ hợp 3 phím power + home + V+ rồi đợi 1 phút gì đó để nó vào màn hình wipe sau đó wipe data với cache. sau đó cho máy khởi động vào download mode sau đó odin tiếp file TWRP mình có dẫn link ở trên. sau khi odin xong thì các bạn lại nhấn tổ hợp power + home + V+ 1 lần nữa sau đó flash file zip Gapps 800.zip mình dẫn link ở trên. nếu thích root máy thì nhấn flash tiếp file magisk.zip ( tất cả những file này đều phải được copy vô thẻ SD card nhé.)
sau đó wipe davik cache và khởi động lại.
mauxyahpy said:
don't flash gapps package downloaded from opengapps
if you guy updated this gapps and stucked in the black screen you have to odin again. then wipe data and cache in stock recovery with power+home+v+ and wait 20 seconds to enter the wipe menu. then you have to odin TWRP again (https://forum.xda-developers.com/sa...wrp-3-0-2-1-samsung-galaxy-a9-pro-sm-t3426701) . enter the new TWRP recovery when odin processing finished. update Gapps 800.zip and magisk.zip( if you guy want to root your phones. you can find the lastest magisk.zip on google.) and the last step is wiping Dalvik cache in TWRP recovery, reboot your phones and wait minutes. so you can see some apps are gonna be fc. don't worry. log in google play and install link2sd or every other app can uninstall system apps. so you can remove what apps be fc.
link gapps: https://drive.google.com/file/d/1gx...EEDnpER62MPG1yIGdq54hHHdIQYzJ1WBv57n45dcJLbao
link magisk : https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
good luck!
------------------------------------------------------------------------------------------------------------------------------------------------
For Vietnamese People.
Những bạn nào đã cài Android 8 mà không có google apps thì đừng cài file tải từ opengapps về. Nó sẽ xuất hiện màn hình màu đen trong quá trình đăng nhập mà không có cách nào có thể dùng được.
Có nhiều bạn không biết là samsung không hoạt động với Google installer gì đó thì nhất quyết đừng tải mấy cái apk đó về cài chi cho mệt vì không thể dùng được.
Các bạn cài file mình vừa đem link ở trên bằng cách flash lại rom gốc 8.0 sau đó không cho máy khởi động lên mà nhấn tổ hợp 3 phím power + home + V+ rồi đợi 1 phút gì đó để nó vào màn hình wipe sau đó wipe data với cache. sau đó cho máy khởi động vào download mode sau đó odin tiếp file TWRP mình có dẫn link ở trên. sau khi odin xong thì các bạn lại nhấn tổ hợp power + home + V+ 1 lần nữa sau đó flash file zip Gapps 800.zip mình dẫn link ở trên. nếu thích root máy thì nhấn flash tiếp file magisk.zip ( tất cả những file này đều phải được copy vô thẻ SD card nhé.)
sau đó wipe davik cache và khởi động lại.
Click to expand...
Click to collapse
You ROCK! Google apps working fine?
upd: Just test it, and it realy works! Thank you! Im spend 3 days trying to resolve it. Where are you find this gapps?
sanakess said:
You ROCK! Google apps working fine?
upd: Just test it, and it realy works! Thank you! Im spend 3 days trying to resolve it. Where are you find this gapps?
Click to expand...
Click to collapse
it also took me 3 days to resolve it. I have no idea to install gapps but when I am really so hopelessly. I found out this gapps package in a forum of xiaomi phones and i tried with it again and so surprised, it worked
my phone is useless without google services
can you update your post with a detailed tutorial and all of the files are needed for everybody stuck in this step.
it would be useful
Can you explain how is this rom with gapps installed?
If you can upload screen shots
I'm on android 6 basicplus and considering to install this rom.
Thank you
MahBB said:
Can you explain how is this rom with gapps installed?
If you can upload screen shots
I'm on android 6 basicplus and considering to install this rom.
Thank you
Click to expand...
Click to collapse
This rom installed without gapps, because no google in china. You need to install gapps from TWRP recovery after install the rom.
sanakess said:
This rom installed without gapps, because no google in china. You need to install gapps from TWRP recovery after install the rom.
Click to expand...
Click to collapse
After a few tries, I finally installed this room with working gapps.
Thank you.
There was a error message that said unauthorized access ..., Which when I restarted the phone the room didn't start. I reinstalled every thing and disabled the logger and everything is fine now.
What was the unauthorized access? The room was official, right? Was it because of gapps or magisk?
MahBB said:
After a few tries, I finally installed this room with working gapps.
Thank you.
There was a error message that said unauthorized access ..., Which when I restarted the phone the room didn't start. I reinstalled every thing and disabled the logger and everything is fine now.
What was the unauthorized access? The room was official, right? Was it because of gapps or magisk?
Click to expand...
Click to collapse
I think it was magisk (root) You need to reinstall magisk from twrp and freeze from titaniumbackup or delete "com.samsung.android.sm.devicesecurity" and "com.samsung.android.securitylogagent" if you want to use root
sanakess said:
I think it was magisk (root) You need to reinstall magisk from twrp and freeze from titaniumbackup or delete "com.samsung.android.sm.devicesecurity" and "com.samsung.android.securitylogagent" if you want to use root
Click to expand...
Click to collapse
The first time it happened I didn't installed magisk. So it must be sth else. Now I just disabled security log agent and all is well. I was just a little worried about the security of this method. Is it safe?
MahBB said:
The first time it happened I didn't installed magisk. So it must be sth else. Now I just disabled security log agent and all is well. I was just a little worried about the security of this method. Is it safe?
Click to expand...
Click to collapse
So twrp. And it is really unsafe, since all files are not encrypted, the password from the phone is reset by several actions on the TWRP. Although there are some ways to make it more secure, but I'm not messing about it. The phone itself should work fine, as this is just a warning about security issues.
sanakess said:
So twrp. And it is really unsafe, since all files are not encrypted, the password from the phone is reset by several actions on the TWRP. Although there are some ways to make it more secure, but I'm not messing about it. The phone itself should work fine, as this is just a warning about security issues.
Click to expand...
Click to collapse
Samsung health also not working. Problem with rooted phones apparently
MahBB said:
Samsung health also not working. Problem with rooted phones apparently
Click to expand...
Click to collapse
Try to hide root in magisk or make clean install without it
sanakess said:
Try to hide root in magisk or make clean install without it
Click to expand...
Click to collapse
Hide didnt work out. Also with a Chinese phone you would need root to remove all that apps and stuff. I have found another way, I will test.
Build prop editor solved Samsung health problem.
MahBB said:
Samsung health also not working. Problem with rooted phones apparently
Click to expand...
Click to collapse
MahBB said:
Build prop editor solved Samsung health problem.
Click to expand...
Click to collapse
Can you share a guide?
sanakess said:
Can you share a guide?
Click to expand...
Click to collapse
Install an app called build prop editor. There are a few of these app. All work the same. Then grant root access and edit this value
Ro.config.tima
From 1 to 0. Then restart the phone. Problem solved.
Apparently it tells the phone that nothing is tampered with.
---------- Post added at 09:26 PM ---------- Previous post was at 09:23 PM ----------
There are all these Chinese characters scattered in every corner of the phone. Do you have any idea how to remove them?
Or remove the yellow pages?
Is there any list of bloatwares on this phone?
MahBB said:
Install an app called build prop editor. There are a few of these app. All work the same. Then grant root access and edit this value
Ro.config.tima
From 1 to 0. Then restart the phone. Problem solved.
Apparently it tells the phone that nothing is tampered with.
---------- Post added at 09:26 PM ---------- Previous post was at 09:23 PM ----------
There are all these Chinese characters scattered in every corner of the phone. Do you have any idea how to remove them?
Or remove the yellow pages?
Is there any list of bloatwares on this phone?
Click to expand...
Click to collapse
You can try this https://drive.google.com/file/d/1XWmMG_Y_60fL33zEgHF5IBRJoG489fs7/view One man from 4pda.ru make it to remove chinese fings. I dont test it, so make backup in twrp before flash it
SO! what about working hotspot? I need hotspot my notebook also working from smart
I don't know how to change search engine in Samsung internet browser to Google. so inconvenient with Baidu search engine.
I tried to change the code in system/csc/other.xml. but it didn't work at all.
We have some Android AVN units which take from KIA cars. They run android 4.4.2. The information:
- CPU: telechips 8971
- Board: from Daesung Electric
- EMMC: 8GB Sillicon Motion
- RAM: 1 GB Samsung
- System: Android 4.4.2 with alot modifition.
We modified the update.zip which was downloaded from manufactor site.
We add some thing to the update.zip to flash custom sparse data image to the unit. We have some mistakes and the update.zip has wrong files inside, when flash update.zip in AVN it was stucked in recovery loop.
Now we need the way boot unit in normal boot or bootloader (fastboot).
We look on manufactor’s site but we don’t find any useful thing.
The AVN can switch to downloader mode but we don’t have driver or tools to work with it in that mode.
Is there any suggestions?
Thank for help.
lamtom said:
We have some Android AVN units which take from KIA cars. They run android 4.4.2. The information:
- CPU: telechips 8971
- Board: from Daesung Electric
- EMMC: 8GB Sillicon Motion
- RAM: 1 GB Samsung
- System: Android 4.4.2 with alot modifition.
We modified the update.zip which was downloaded from manufactor site.
We add some thing to the update.zip to flash custom sparse data image to the unit. We have some mistakes and the update.zip has wrong files inside, when flash update.zip in AVN it was stucked in recovery loop.
Now we need the way boot unit in normal boot or bootloader (fastboot).
We look on manufactor’s site but we don’t find any useful thing.
The AVN can switch to downloader mode but we don’t have driver or tools to work with it in that mode.
Is there any suggestions?
Thank for help.
Click to expand...
Click to collapse
Bạn đã tìm được câu trả lời chưa?
JohnMichael12 said:
Bạn đã tìm được câu trả lời chưa?
Click to expand...
Click to collapse
We can connect to the AVN via uart port so we can control some boot function and display boot message. But we still can not switch the AVN to bootloader mode (don’t find correct command to switch to bootloader mode).
lamtom said:
We can connect to the AVN via uart port so we can control some boot function and display boot message. But we still can not switch the AVN to bootloader mode (don’t find correct command to switch to bootloader mode).
Click to expand...
Click to collapse
Bạn có thể mô tả các lệnh mà bạn đã làm được không?
JohnMichael12 said:
Bạn có thể mô tả các lệnh mà bạn đã làm được không?
Click to expand...
Click to collapse
1. Change boot to recovery mode.
2. Change boot to download mode.
3. Skip load quickboot data.
4. In normal boot, after booting process, via UART we can login linux console like "adb shell".
Bạn có thể nói cách làm cho mọi người biết được không? Tôi đang gặp trường hợp "AVN it was stucked in recovery loop". Để vào "nomal boot" hoặc chế độ "fastboot" thì làm thế nào?
lamtom said:
We have some Android AVN units which take from KIA cars. They run android 4.4.2. The information:
- CPU: telechips 8971
- Board: from Daesung Electric
- EMMC: 8GB Sillicon Motion
- RAM: 1 GB Samsung
- System: Android 4.4.2 with alot modifition.
We modified the update.zip which was downloaded from manufactor site.
We add some thing to the update.zip to flash custom sparse data image to the unit. We have some mistakes and the update.zip has wrong files inside, when flash update.zip in AVN it was stucked in recovery loop.
Now we need the way boot unit in normal boot or bootloader (fastboot).
We look on manufactor’s site but we don’t find any useful thing.
The AVN can switch to downloader mode but we don’t have driver or tools to work with it in that mode.
Is there any suggestions?
Thank for help.
Click to expand...
Click to collapse
How to you update update.zip file from manufactor. I can't open update.zip because password
lamtom said:
We have some Android AVN units which take from KIA cars. They run android 4.4.2. The information:
- CPU: telechips 8971
- Board: from Daesung Electric
- EMMC: 8GB Sillicon Motion
- RAM: 1 GB Samsung
- System: Android 4.4.2 with alot modifition.
We modified the update.zip which was downloaded from manufactor site.
We add some thing to the update.zip to flash custom sparse data image to the unit. We have some mistakes and the update.zip has wrong files inside, when flash update.zip in AVN it was stucked in recovery loop.
Now we need the way boot unit in normal boot or bootloader (fastboot).
We look on manufactor’s site but we don’t find any useful thing.
The AVN can switch to downloader mode but we don’t have driver or tools to work with it in that mode.
Is there any suggestions?
Thank for help.
Click to expand...
Click to collapse
Hi, Are you resolve the problem. I got same issue with you
nobitanguyen said:
Hi, Are you resolve the problem. I got same issue with you
Click to expand...
Click to collapse
With some device, via uart port we can skip the recovery and the unit change to normal boot. But in some of them the normal boot still stuck so we can’t fix. We don’t find the command to switch device to fastboot mode.
When I erase entire Flash on QFIL ( Partion manager ) , PC connection only receives port " qualcomm hs-usb qdloader 9008 ", How to unbrick,Thank ( Sorry my english is not good )
PS : Done
After unbrick , imei phone =0 . Can you help me?
heaven3tt said:
After unbrick , imei phone =0 . Can you help me?
View attachment 5308041
Click to expand...
Click to collapse
need backup modemst1.bin, modemst2.bin.,fsg.bin, modem_a.bin,modem_b.bin..
sorry.. i have backup lg v50... if you want to try reload my backup..
first. backup your modem_a.bin,modem_b.bin.
if your reload succed for imei but no signal.. you can flash kdz file...hope you succed..
heaven3tt said:
After unbrick , imei phone =0 . Can you help me?
View attachment 5308041
Click to expand...
Click to collapse
Hello, how was you able to unbrick your phone? Did you use QFIL? I need to fix my LG v50
wibigdog said:
Hello, how was you able to unbrick your phone? Did you use QFIL? I need to fix my LG v50
Click to expand...
Click to collapse
Yes...with QFIL.....
agn8888 said:
Yes...with QFIL.....
Click to expand...
Click to collapse
Yes, I'm trying this... However, I don't have the required xml/partition files. My partitions are gone because I accidentally erased the flash.
wibigdog said:
Yes, I'm trying this... However, I don't have the required xml/partition files. My partitions are gone because I accidentally erased the flash.
Click to expand...
Click to collapse
I tried to follow this tutorial for LG G7 https://forum.xda-developers.com/t/how-to-recover-from-any-hardbrick-or-red-case-in-9008-mode-without-any-boxes.4052841/
Sadly, the rawprogam generator for V30 that they used have stopped working for newer models.
You need firehose to reload the modemst1 and modemst2.... with qfil...
firehose lg v50...
Hi, do you happen to check or verify what's hardware info on the soundcard of your V50S?
I've been looking to check if the Quad-DAC is from ESS or from Qualcom's.
agn8888 said:
need backup modemst1.bin, modemst2.bin.,fsg.bin, modem_a.bin,modem_b.bin..
sorry.. i have backup lg v50... if you want to try reload my backup..
first. backup your modem_a.bin,modem_b.bin.
if your reload succed for imei but no signal.. you can flash kdz file...hope you succed..
Click to expand...
Click to collapse
Many thanks to you kind person!!! I faced "no signal issue" on v50s after crossflash. I Used QFIL and flashed your fgs,modemst1 an modemst2 partitions and it works fine with v50s. I'm happy!
Tôi vừa tạo một tệp sao lưu phân vùng từ QFIL cho LG V50s v510n20v android 10. Bao gồm tất cả các phân vùng và tệp .xml.
Tôi vừa tạo một tệp sao lưu phân vùng từ QFIL cho LG V50s v510n. Tuy nhiên có 2 lỗi là mất imei, có thể nhập *#546368#*510# để khắc phục. Lỗi hiển thị tên thiết bị và tên thiết bị Bluetooth của bạn.
dung lượng 6gb. Giải nén ~20gb
backup_lg-v50s.rar
drive.google.com
Zenozero said:
Tôi vừa tạo một tệp sao lưu phân vùng từ QFIL cho LG V50s v510n20v android 10. Bao gồm tất cả các phân vùng và tệp .xml.
Tôi vừa tạo một tệp sao lưu phân vùng từ QFIL cho LG V50s v510n. Tuy nhiên có 2 lỗi là mất imei, có thể nhập *#546368#*510# để khắc phục. Lỗi hiển thị tên thiết bị và tên thiết bị Bluetooth của bạn.
dung lượng 6gb. Giải nén ~20gb
backup_lg-v50s.rar
drive.google.com
Click to expand...
Click to collapse
sorry the post above has no effect at all.
backup xml file + partition needed to enter Download mode of lg v50s here https://drive.google.com/file/d/1SlPc4CpHUVM1FW-AsEUDaSOsrTNb2Va2/view?usp=sharing
0. Consult the recovery method of lg v50 or other machine and find the program file to install. QFIL and LGUP or LG Drive.
1. go to load xml.
2. select the extracted lg backup file and select it
all .xml files select open
3. choose cancel
4. choose download
5. wait for it to load
6. When done, press the volume button - at the same time with the power button for about 12 seconds
release, wait 10 20 seconds if no response press again. If it is up, the logo will appear and then turn off. Press and hold volume + button to enter downloade mode and then go to lgup up to rom.
7. In LGUP when pressing Start, there will be a notice board, please select Yes.
Zenozero said:
sorry the post above has no effect at all.
backup xml file + partition needed to enter Download mode of lg v50s here https://drive.google.com/file/d/1SlPc4CpHUVM1FW-AsEUDaSOsrTNb2Va2/view?usp=sharing
Click to expand...
Click to collapse
It seems the file has been deleted.
Could you please update the link ?