Hey guys,
I tried to root my SM-G930F and I probably have used the wrong ROM.
When I turn it on I got the following message:
"An error has occurred while updating the device software. Use the emergency recovery function in the smart switch PC software.".
Problem:
Phone will turn on just if it is connected to the charger/PC. (Otherwise the screen will be always dead black).**
**If connected to PC it will power off in 30 seconds or less.
OBS:
1. Phone NEVER turn off while connected to the CHARGER.
2. If connected to the PC it will turn off after 30 seconds, no matter if I'm in the message screen or in download mode.
Already:
3. Tried several cables (Including stock cable).
4. Tried to charge the phone.
5. Tried to remove SD card and SIM card.
6. Tried other USB ports and a USB Hub with external power source.
Any help would be great!
Thanks for reading and have a great day.
Did you tried to flash fast in odin stock image ? Did you tried with other charger ?
Related
Hi, past week i have a big problem whit my Ace... From nowhere my phone stop connection to my PC. When i plug in to the cable it only charge but no data. This mean no possible connection to PC, and more important no ROM Update! So how i fix it!
After try everything you can thing about this finnaly work!
You will need ODIN 4.38, some random full package ROM
1.Remove your SIM and Memory card
2.Load ODIN in your PC, and load the ROM files
3.Connect your Phone whit the PC via data cable and enter Download mode (Volume -; Home Button; Power Button)
note: if don't work, try another USB slot, my phone don't accept back USB's and i succed to connecting to front one!
4.Now ODIN should found your phone
5.After ODIN found your phone, disconnect the phone and reset him. It must work now
Cheers Sorry from my eniglish, hate to correct
Hi guys, i realy need your help, my phone is dead.
My I9100 worked fine for two years, I flashed lots of custom firmwares by Odin. Half a moth ago, when I was going to sleep, I plugged in the charger as usually, and noticed, that it started beeping occasionally. On the display it indicated smth like: Charging... than Not Charging... than Charging and so on.
I thought that I plugged the charger incorrectly and replugged it, but it didn't helped. I was very tired and just simply turned the soud off and left the phone charging. In the morning it indicated that it is charging even when the charger was unplugged.
So I've flashed the firmware - no help, than kernel from stock to fillz - no help , than siyah than again to stock - no help. All flashings were maid via CWM. I realized that flashing will not help when I turned off the phone and it was indicating that it is charging.
I decided not to do anythig. Only USB mode didn't worked because when you want to use your phone as USB you should open the apropriate mode on the phone than there will be smth like : plug the USB data cable to enter the USB data transfer mode. I couldn't do this because my phone thought that the cable is already plugged. In forums i've got hints that my micro usb should be cleaned or small board should be replaced. So i decided to clean it. I disassembled the phone and cleaned that board with micro USB. Than turned on the phone, and connected the cable. Phone recognized it and I managed to transfer files from pc to phone. From this point I can say that all terminals on micro USB are ok.
When i unplugged the cable, phone thought that it is plugged((
The most awful part:
I decided to flash it one more time and go to stock via backup made by CWM a year ago.
But during this process the phone made a reboot by itself and after that there was no loading. I can see only name of the device and thats it.
No recovery. Only download mode.
When i connect it to PC in download mode, there is a sound that USB is connected but the device is Unknown. There is no any information about this device in dev manager on PC. I tried two USB cables, all usb ports, two laptops, all versions of USB drivers for my phone.
Earlier, drivers worked well, but now i can't understand where is the problem: Is the problem still connected with my micro usb port or i just erased boot sector and it is already brick.
I gave my phone to service center, they told that they can't help me with this. They say that usb is ok, we don't know why it is not detecting by pc.
Can the board replacement help in this issue or maybe i can do smth. in linux with my device ??? I'll appreciate any suggestions.
Yesterday I talked to representatives of service center and they told me that the problem is that internal memory is damaged and they cant flash the phone.
I took the phone and tried to flash it via Heimdall with brick fix pit.
After using this pit file, the phone was flashed normally and even turned on normally.
But in the phone info menu I saw no any data about internal memory. (It was damaged and required format). I tried format through phone menu and it did nothing.
I decided to flash the phone via Odin with normal 16 GB pit file and had a bad luck. I experienced freez during repartition. After this, phone is a complete brick.
When I connect it to PC without battery pressing vol down and rower buttons it connects as unknown device but there is nothing on the phone display. No recavery no download mode. Nothing - just reflection of my frustrated face).
Currently i'm tring to make a Jtag, maybe it'll put it in the download mode, but hope is dying....
I've herad somewhere that it is possible to put it in the download mode in linux. If somone did this, could you please give me the contact of this person?
I have been running on Cooks I777UCMD8 rom for about 2 months now and have had multiple powering issues. Have tried all the basic trouble shooting, not sure if its the Rom causing the issues or the AJK noswap Kernel, but nothing has been tweaked, running as is. The booting issue is when connecting a USB cable while the phone is powered off, if you try to turn the phone on while the USB cable is still attached you get a POWER RESET OR UNKNOWN UPLOAD MODE error message, only way to avoid it is to remove the usb cable and hold power button then it powers up normally.
now the problem with the USB cable, and i feel these two are possibly related, my phone no longer recognizes when its attached to a computer usb hub, it charges, but dose not enter into mass storage mode, nor does the computer recognize that the phone is attached, i have tried on multiple computers with same results, and yes all drivers are downloaded on computers. Further information; Before this problem began accruing, I would get error messages after attaching the phone to a pc VIA usb cable saying ( ONE OF THE USB DEVICES ATTACHED TO THIS COMPUTER HAVE MALFUNCTIONED, AND WINDOWS DOES NOT RECOGNIZE IT ) also, after plugging in the usb cable and windows attempted to download the drivers this error also appeared ( DEVICE SOFTWARE WAS NOT SUCCESSFULLY INSTALLED, CONSULT WITH YOUR DEVICE MANUFACTURER FOR ASSISTANCE ) it later resolved itself for a short time ( couple days ) but now when i connect the phone, nothing happens... i'm hoping somebody has had similar USB problems after flashing a new rom and knows whats going on.
additional information:
- i have two Galaxy S2 phones both running cooks-i777ucmd8 rom and both phones have had the exact same issues.
- previous problems also include boot looping, and frozen lock screen upon powering up the phone. has not happen in a while.
I was having issues with the charging the phone (slow charge in AC) and connecting it to PC through original charger/data cable. So after changing the data cable (in warranty), it solved both of the problem. But now after 1-2 days, charging is okay but I can't connect the cell with PC at all. It just charges the phone but by showing the error 'device not recognized'. I tried multiple PC/laptop but in vain. Also when I connect my phone in to fastboot mode, it just flashes the device and gets disconnected. If I try to flash twrp via fastboot it shows me 'failed: too many links' error. I'm on latest OOS 3.1.2 rooted with Xposed.
So anybody can tell me what to do?
P.S. also tried changing ROMs but no help.
Hi,
maybe one of the experts can help...
I have a LEMAX2 with X820_20S_ROW_CUOCO92 ROM.
Since half a year or so the USB-Connection to the PC does not work anymore. Tried several cables and several PCs, no change.
I can boot the phone in RECOVRY Mode, but it It shuts itself off immediately.
I can enter fastboot mode, but the phone is still not recognized by the PC.
When I connect the phone via MyPhoneExplorerClient, WLAN works, but MyPhoneExplorerClient says 'USB-Cabel 'Not conneced.'
When I unplug and re-plug the USB-Cable, for a short time MyPhoneExplorerClient says 'USB-Cabel 'conneced', but no setting option for USB configuration can be found and after a second or so MyPhoneExplorerClient shows 'USB-Cabel Not conneced' again.
I tried to find out how to change or repair the firmware but all howtos require a USB Connection.
Mayby I accidentaly removed some system software responsible for the USB Connection?
Any idea?
:crying:TWSMS