Hello, I need help with an amazfit beep, when updating in IOS to the latest version the clock was on screen a message that said "connect app to update resources".
Then I linked the clock to an android and using gadgetbridge install the res 9.40 and then the fw 9.26 then in this last step the clock did not end and it was turned off. Now I can not turn it on or in the charging base.
Help
Mine was in bricked mode since a month ago.
Was using the Notify n Fitness app, then out of sudden i decide to manually converting to another rom. the first phase was successful. but then, it restarted to 2nd phase, unfortunately it didn't managed to get there... stay in 'sleep mode' ever since.
revolutionyo said:
Hello, I need help with an amazfit beep, when updating in IOS to the latest version the clock was on screen a message that said "connect app to update resources".
Then I linked the clock to an android and using gadgetbridge install the res 9.40 and then the fw 9.26 then in this last step the clock did not end and it was turned off. Now I can not turn it on or in the charging base.
Help
Click to expand...
Click to collapse
Any status on this brick? Same happened to me few moments ago
I am with the same problem. Please, must be a solution... anyone knows something? Thanks in advance
Me2 same with this like that.
For first poster : You have to flash first FW, THEN .res.
Maybe that's why.
To flash the 2 files, i used Notify & Fitness today and all ok.
FW : 0.1.0.27
And once it's bricked, for now, I haven't seen anyone recovering it...
Mine was brick as well. I followed the tutorial of one of the thread here
vernel1008 said:
Mine was brick as well. I followed the tutorial of one of the thread here
Click to expand...
Click to collapse
Which tutorial have you followed and did it help ?
---------- Post added at 10:39 AM ---------- Previous post was at 10:38 AM ----------
My watch is not dead but it's bootlooping this is after I tried to update the latest firmware using mi fit app and it failed now mi fit app won't recognize the device it says "unable to connect please restart the Bluetooth and try again". The watch turn on with backlight then backlight turns off after few seconds and just a second after backlight turn off the watch turns off and turn on again.The watch show the correct time and have it's default watchface. Does anybody know how to resolve this issue.
vmirjolkar said:
Which tutorial have you followed and did it help ?
---------- Post added at 10:39 AM ---------- Previous post was at 10:38 AM ----------
My watch is not dead but it's bootlooping this is after I tried to update the latest firmware using mi fit app and it failed now mi fit app won't recognize the device it says "unable to connect please restart the Bluetooth and try again". The watch turn on with backlight then backlight turns off after few seconds and just a second after backlight turn off the watch turns off and turn on again.The watch show the correct time and have it's default watchface. Does anybody know how to resolve this issue.
Click to expand...
Click to collapse
We have two watches in my family and both of them have the same problem that you explained above. Have you got the solution?
vinczetibor said:
We have two watches in my family and both of them have the same problem that you explained above. Have you got the solution?
Click to expand...
Click to collapse
Same problem. As far as I understand, "brick" is not treated. There is no solution to the problem (((
Got bootloop after pair with new phone T_T
Sent from my SM-N950F using Tapatalk
vmirjolkar said:
Which tutorial have you followed and did it help ?
---------- Post added at 10:39 AM ---------- Previous post was at 10:38 AM ----------
My watch is not dead but it's bootlooping this is after I tried to update the latest firmware using mi fit app and it failed now mi fit app won't recognize the device it says "unable to connect please restart the Bluetooth and try again". The watch turn on with backlight then backlight turns off after few seconds and just a second after backlight turn off the watch turns off and turn on again.The watch show the correct time and have it's default watchface. Does anybody know how to resolve this issue.
Click to expand...
Click to collapse
Hi There,
I'm also facing the bootlopping issue, I tried using another phone to pair. after many tries, I;m able to see the paring screen but I;m unable to press the 'Tick' icon then after awhile it will auto reboot again.
have you found a way to fix it yet?
alfenneo said:
Hi There,
I'm also facing the bootlopping issue, I tried using another phone to pair. after many tries, I;m able to see the paring screen but I;m unable to press the 'Tick' icon then after awhile it will auto reboot again.
have you found a way to fix it yet?
Click to expand...
Click to collapse
I haven't found fix for this one.
https://www.tuttoandroid.net/xiaomi/scopriamo-un-amazfit-bip-un-teardown-inconsueto-525801/
I came across the above link regarding the teardown of amzefit bip and it says if the wrong firmware is flashed and if the watch bricks it can be unbricked by using the testing points available on motherboard of the watch. I don't have a decent electronics background so didn't understood it.
Finally I just understood that it's possible but, not for common user like me (unless someone creates a proper tutorial)
Hi,
I have the same issue.
Do you find something ?
Regards
Envoyé de mon LG-H870DS en utilisant Tapatalk
I have the same problem, bootloop and can't connect anymore:/
after using the dialer menu to update to .187 on my lya-09 i can no longer use face unlock. i deleted the stored faces to see if this would fix it and i can no longer even enroll my face, it just sits at the look directly at the screen part and never goes any further. any ideas?
even after a factory reset i still cannot enrol face. it recognises my face is there but does not prompt me to turn my head like it usually does. i have no idea why
What's the dialer menu update method?
Found it.
djisgod I'm sorry that I can't offer you any help, but if you please keep us posted abot your problem and eventual solution. Thx in advance
It's probably seeing the software as modified and not allowing you to use the secure face unlock feature. Or it's broken by the update which might be why they've delayed it.
I'm not sure it is very strange. Does anybody know which apk or app it is that does the face enrolling so i can try and install a different version?
i have done the update, and face unlock works without any problem for me, but i also have the lya-l29
still no luck with this. i have tried reset to factory settings and reinstalling the firmware. neither work.
and now it has suddenly started working again. lol not sure why it stopped but i am glad its back!
which update file have you used to update your phone?
describe exactly which file you've used to update via dialer menu AND even which model do you use?
I used the update for my phone the lya-09 c432. 9.0.0.187 update file. All is working fine now. Not sure what was going on but face unlock is now working again.
Hello mates!
I've sold my Pocophone a while ago and it was working as supposed to. I don't know what the person did but the phone went to the system configuration as if someone did a factory reset or something but it a mess.
When the setup starts it shows a message "Android Setup isn't responding" with a Wait or Ok option.
After a while the message "Android Setup Keeps stopping" also appers.
After that it starts the confituration but when it asks me to connect to WiFi it's completely blank. No WiFi options is showed in the screen.
I can skip that and continue the configuration but in the end a message is showed saying that I didn't configurate a Google Account and it puts me back to the beggining of the configuration.
I've tried a wipe data in recovery menu but nothing changed.
Edit: after I noticed that I can access de notification bar and the configurations of the phone. I discovered that it's using Android 10.0.4.0 and that I can't access WiFi button or configuration. WiFi button is not clickable and the configuration menu is blank and if I wait some long time the options appears but when I click to activete WiFi it says that is activanting but the button comes back to original position.
Edit 2: with Mi Flash Pro I could install the latest version of the system (10.0.6.0) but nothing changed. I noticed that in this configuration menu after a while the phone reboots.
Edit 3: Now I've found something bizarre. Baseband version is unknown. I think that most of the problems maybe is connected to that.
antonioli84 said:
Hello mates!
Edit 2: with Mi Flash Pro I could install the latest version of the system (10.0.6.0) but nothing changed. I noticed that in this configuration menu after a while the phone reboots.
Edit 3: Now I've found something bizarre. Baseband version is unknown. I think that most of the problems maybe is connected to that.
Click to expand...
Click to collapse
Latest version of miui is MIUI 11 (11.0.6.0).
If the baseband version is unknown it means you have corrupted the modem. Your IMEI number is also gone and you can't use your SIM services.
---------- Post added at 01:16 PM ---------- Previous post was at 01:07 PM ----------
antonioli84 said:
Hello mates!
I've sold my Pocophone a while ago and it was working as supposed to. I don't know what the person did but the phone went to the system configuration as if someone did a factory reset or something but it a mess.
When the setup starts it shows a message "Android Setup isn't responding" with a Wait or Ok option.
After a while the message "Android Setup Keeps stopping" also appers.
After that it starts the confituration but when it asks me to connect to WiFi it's completely blank. No WiFi options is showed in the screen.
I can skip that and continue the configuration but in the end a message is showed saying that I didn't configurate a Google Account and it puts me back to the beggining to that.
Click to expand...
Click to collapse
There are two setups in miui, one is done by miui and second is done by google. So try setting up your phone both times without google account. Once you've made it to the launcher you can figure out the problems.
callmebutcher101 said:
Latest version of miui is MIUI 11 (11.0.6.0).
If the baseband version is unknown it means you have corrupted the modem. Your IMEI number is also gone and you can't use your SIM services.
---------- Post added at 01:16 PM ---------- Previous post was at 01:07 PM ----------
There are two setups in miui, one is done by miui and second is done by google. So try setting up your phone both times without google account. Once you've made it to the launcher you can figure out the problems.
Click to expand...
Click to collapse
Thank you for the reply.
That day after hard reset again and knock a little bit the phone, all of sudden the unkwown status changed and the WiFi worked. But was intermittent and also all of sudden the WiFi stopped and sometimes worked on next boot and sometimes not showing again unknown. Sometimes the phone rebooted by itself.
Something is weird with the phone and I don't know if it's physical or software issue.
I returned the phone to the owner. I'm sorry I wrote 10.0.6.0 but it's 11.0.6.0.
Help me!!
gtr 47 please open the app, and select "check for updates" on the watch device page to continue update.
boymac said:
Help me!!
gtr 47 please open the app, and select "check for updates" on the watch device page to continue update.
Click to expand...
Click to collapse
Hello friend, it seems it corrupted the firmware update,
No need to panic, please explain what you where trying to do?
You tried to rollback the firmware with other app, like notify & fitness ,
or you tried to update the watch through official Mi Fit?
In any case, what files did it installed succesfully, the Firmware, the res, the font or the Gps?
And what version of the fw where you trying to update?
Rizla46
Rizla46 said:
Hello friend, it seems it corrupted the firmware update,
No need to panic, please explain what you where trying to do?
You tried to rollback the firmware with other app, like notify & fitness ,
or you tried to update the watch through official Mi Fit?
In any case, what files did it installed succesfully, the Firmware, the res, the font or the Gps?
And what version of the fw where you trying to update?
Rizla46
Click to expand...
Click to collapse
hi, i have the same problem and i only have problems updating the fonts. can you help?
rubio0203 said:
hi, i have the same problem and i only have problems updating the fonts. can you help?
Click to expand...
Click to collapse
Hello friend, Do you have mi fit also installed in your device?
Also, what version of zepp have you installed? All in One, or Official?
Rizla46 said:
Hello friend, Do you have mi fit also installed in your device?
Also, what version of zepp have you installed? All in One, or Official?
Click to expand...
Click to collapse
Hello I have the same issue, I think the watch did an OTA update however
It cannot get fonts to install!.
I have:
firmware (1.3.6.06): Updated
Basic Resources (V14): Not updated
Resources (V58): No updated
Fonts (V11): Not updated
GPS: Updated
Latest Zeep from Google Play
Is there a way of going back to the previous firmware release?
Thanks
Rizla46 said:
Hello friend, Do you have mi fit also installed in your device?
Also, what version of zepp have you installed? All in One, or Official?
Click to expand...
Click to collapse
Hello I have the same issue, I think the watch did an OTA update however
It cannot get fonts to install!.
I have:
firmware: 1.3.6.06
Ltates Zeep from Google Play
Is there a way of going back to the previous firmware release?
Thanks
Rizla46 said:
Hello friend, Do you have mi fit also installed in your device?
Also, what version of zepp have you installed? All in One, or Official?
Click to expand...
Click to collapse
Hello I have the same issue, I think the watch did an OTA update however
It cannot get fonts to install!.
I have:
firmware: 1.3.6.06
Ltates Zeep from Google Play
Is there a way of going back to the previous firmware release?
Thanks
j77moduss said:
Hello I have the same issue, I think the watch did an OTA update however
It cannot get fonts to install!.
I have:
firmware: 1.3.6.06
Ltates Zeep from Google Play
Is there a way of going back to the previous firmware release?
Thanks
Click to expand...
Click to collapse
Hello again, Yes, you can download Notify & Fitness for Amazfit(Green Logo), You Download from here (XDA Developers) a previous version to downgrade, and when you complete, you run again Zepp oficcial, for update.
If the downgrade can't complete, select to update from notify, and choose stock firmware!
in many cases can't update correct to the latest firmware.
Also If you have mi fit in the phone, uninstall it, because the devise gets confused with both (Zepp and Mi Fit) and if you have the magiacal unicorn Zepp Edition, you should have the online update setting on.
Rizla46 said:
Hello again, Yes, you can download Notify & Fitness for Amazfit(Green Logo), You Download from here (XDA Developers) a previous version to downgrade, and when you complete, you run again Zepp oficcial, for update.
If the downgrade can't complete, select to update from notify, and choose stock firmware!
in many cases can't update correct to the latest firmware.
Also If you have mi fit in the phone, uninstall it, because the devise gets confused with both (Zepp and Mi Fit) and if you have the magiacal unicorn Zepp Edition, you should have the online update setting on.
Click to expand...
Click to collapse
Hello I tried to down grade unsuccessfully using Notify and Fitness but it fails trying to update Fonts!. It is the same error that I get in Zepp oficial.
Any other suggestions?
Thanks
j77moduss said:
Hello I tried to down grade unsuccessfully using Notify and Fitness but it fails trying to update Fonts!. It is the same error that I get in Zepp oficial.
Any other suggestions?
Thanks
Click to expand...
Click to collapse
I had the same problem in 2 cases, but with notiffy and after some tries, it managed to downgrade the fw file, and when I connected in zepp it updated the fonts succesfully.
But it took over 3-4 times in each case through notify.
Hello, could you let me know the version you used to downgrade and where I can download it.
Thanks
j77moduss said:
Hello, could you let me know the version you used to downgrade and where I can download it.
Thanks
Click to expand...
Click to collapse
the one that suggested notify as stock.
Rizla46 said:
Hello friend, Do you have mi fit also installed in your device?
Also, what version of zepp have you installed? All in One, or Official?
Click to expand...
Click to collapse
I don't have mifit, I had zepp aex 5.4.0 and the watch on version 1.3.7.17. Trust when I tell you I have try everything. Downgrade all version, install all app version since the watch came out, and nothing woks. I use notify and fitness to do does downgrades and always fail at fonts, I had some luck getting the phone to work, but I went crazy and did the update to the Last version and then again the problem with the fonts. Open to suggestions
well, i guess its the end, after the new update 1.3.7.17 i cant dowgrade to any version. always fail, im trying to downgrade to 1.3.4.14.
News, I managed to get the watch in to home screen and use it with all functions. The problem, I can barely see the screen, it's a glitch I think, I can unly do this with the charger connected and sending two notifications to the watch and pressing the power button. I can use the watch and do everything but when I disconnect the charger or leave it for a time back to "please open the app and select check for updates". Trying to do something new I'll be posting soon.
rubio0203 said:
News, I managed to get the watch in to home screen and use it with all functions. The problem, I can barely see the screen, it's a glitch I think, I can unly do this with the charger connected and sending two notifications to the watch and pressing the power button. I can use the watch and do everything but when I disconnect the charger or leave it for a time back to "please open the app and select check for updates". Trying to do something new I'll be posting soon.
Click to expand...
Click to collapse
As you describe it, there are many issues to the device, there is a chance to be a faulty device.
Contact huami if you are still in guarantee.
for the one case I rolled back the firmware, the problem was that it didn't updated the fonts correctly, and the screen was going on and of instantly, but when I managed to rollback, and update the new firmware successfully , the problem was corrected.
Also when you go for official last update (if you rollback) choose official Zepp, Not AEX or Magical unicorn's.
And Don't disconnect the device from app or bluetooth, while the hole procedure (All files) are updated.
Also you can download a previous official version of zepp, and it will update automatically the firmware that was distributed on the specific version of zepp
Rizla46 said:
As you describe it, there are many issues to the device, there is a chance to be a faulty device.
Contact huami if you are still in guarantee.
for the one case I rolled back the firmware, the problem was that it didn't updated the fonts correctly, and the screen was going on and of instantly, but when I managed to rollback, and update the new firmware successfully , the problem was corrected.
Also when you go for official last update (if you rollback) choose official Zepp, Not AEX or Magical unicorn's.
And Don't disconnect the device from app or bluetooth, while the hole procedure (All files) are updated.
Also you can download a previous official version of zepp, and it will update automatically the firmware that was distributed on the specific version of zepp
Click to expand...
Click to collapse
thaks for the reply. i have this in mind, i can downgrade to any version with notify and fitness, maeby if i go to the version when the problem happens i can manage to update the firmware. ill give it a try.
Can we stop the Zepp app from auto updating? When I last opened the app it instantly triggered my watch update without warning me. The worsts part was that my battery was low near 10% which is very risky.
My condition is worse than yours...
I'm also stuck on the same screen as in the picture you sent & I can not install anything.
If I try to update anything or even upload a design background to the watch, I get an error message and the watch restarts. :crying:
AlonHagai said:
My condition is worse than yours...
I'm also stuck on the same screen as in the picture you sent & I can not install anything.
If I try to update anything or even upload a design background to the watch, I get an error message and the watch restarts. :crying:
Click to expand...
Click to collapse
you managed to solve the problem?