Hi Team,
I purchased Samsung S7-Edge (unlocked) in USA and started using in India. I received Nougat update when i started using in India. It was running on Nougat until recently mobile started restarting continuously. So, i downloaded Firmware (Android 6.0 ) of UK region and tried to flash it using Odin. Mobile started working properly. Later upon connecting to Wi-Fi (connected in India), i received a message to update to Android 7.0. After the update mobile started restarting displaying Samsung Logo. So, i tried cleared the Cache; then it shows updating apps (7 out of 23) and keeps on restarting again.
Can anyone please help me to resolve this issue ?
I am not sure if i have picked right Firmware version as i purchased it in USA and using it in India. I have Serial Number & IMEI number with me. I remember the Firmware version at the time of Purchase was UAE, but not sure if it is from LYS OR XSG.
Try with German DBT latest or look firmware 4 files for your device .
Teddy Lo said:
Try with German DBT latest or look firmware 4 files for your device .
Click to expand...
Click to collapse
Thank you so much Teddy. I flashed with DBT version and it worked !!!!. Initial startup took too much time. So, i thought it didn't work. So, i have flashed with other countries firmware as well. But, in the end before giving up i again installed DBT and left the mobile untouched for entire night. Thank God!, it started working..
Thanks a Ton!!!!
You Welcome just edit this post as SOLVED!
Bootloop after Oreo Update
Teddy Lo said:
You Welcome just edit this post as SOLVED!
Click to expand...
Click to collapse
Hi All,
As Teddy suggested i have downloaded DBT firmware for my SM-G935F and flashed it. It started working fine. But, after oreo update, it again goes into Bootloop. I will remind that the mobile is purchased in USA but im not aware of the Firmware's location. Please help me in understanding if i connect to Wi-Fi, updates are downloaded which are release for Firmware's Country ??
I observed a strange behaviour. When i have updated Google app by opening Play store, mobile suddenly switched Off and went into Boot Loop.
Please help me with the Firmware Selection and if there are any best and permanent solution for this problem.
Thanks,
Sri
SriVikasRam said:
Hi All,
As Teddy suggested i have downloaded DBT firmware for my SM-G935F and flashed it. It started working fine. But, after oreo update, it again goes into Bootloop. I will remind that the mobile is purchased in USA but im not aware of the Firmware's location. Please help me in understanding if i connect to Wi-Fi, updates are downloaded which are release for Firmware's Country ??
I observed a strange behaviour. When i have updated Google app by opening Play store, mobile suddenly switched Off and went into Boot Loop.
Please help me with the Firmware Selection and if there are any best and permanent solution for this problem.
Thanks,
Sri
Click to expand...
Click to collapse
Hi once again , download Samsung Smart switch and install on your PC don't update the aplication !
http://downloadcenter.samsung.com/content/SW/201706/20170601113339558/Smart_Switch_PC_Setup.exe
Do the same thinks like in this video : ) ....
https://www.youtube.com/watch?v=9QhJngOuLQ4
Good Luck ! : )
Teddy Lo said:
Hi once again , download Samsung Smart switch and install on your PC don't update the aplication !
http://downloadcenter.samsung.com/content/SW/201706/20170601113339558/Smart_Switch_PC_Setup.exe
Do the same thinks like in this video : ) ....
https://www.youtube.com/watch?v=9QhJngOuLQ4
Good Luck ! : )
Click to expand...
Click to collapse
Thanks for quick reply. But Samsung smart switch says, 'SM-G935F' doesnt support initializing. Please contact our service center.
SriVikasRam said:
Thanks for quick reply. But Samsung smart switch says, 'SM-G935F' doesnt support initializing. Please contact our service center.
Click to expand...
Click to collapse
Send me your IMEI and SN in PM : )
Related
Hello comunity ! I bought 2 days ago a Xperia Z5 Compact E5823 model (i live in Romania - Eastern Europe) and when i boot it up i skip everything and update straight to android 6.0.1 .....after factory reset again i see no fingerprint option and have never seen it even in launch configuration startup althow i skipped everything. Now i am reinstalling xperia firmware via companion (recovery mode) to see if the option will be there or not i am so SO dissapointed about this fact .....is it possible that this is a model without the sensor ?
Drewmk20 said:
Hello comunity ! I bought 2 days ago a Xperia Z5 Compact E5823 model (i live in Romania - Eastern Europe) and when i boot it up i skip everything and update straight to android 6.0.1 .....after factory reset again i see no fingerprint option and have never seen it even in launch configuration startup althow i skipped everything. Now i am reinstalling xperia firmware via companion (recovery mode) to see if the option will be there or not i am so SO dissapointed about this fact .....is it possible that this is a model without the sensor ?
Click to expand...
Click to collapse
Hope this helps you bro http://m.androidcentral.com/setting-and-using-fingerprint-scanner-sony-xperia-z5
Hit Thanks if helped
Sent from my Moto G 2014 using XDA-Developers mobile app
Unfortunately not .....i don't have the option on security (fingerprint missing) ..... i reinstalled 6.0.1 but nothing . Now i am doing 5.1.1 with flashtools to see the result maybe there is still hope ....i see that this is the Z5C E5832 Rev 1.0 so it should have the fingerprint right ? :S or at least if it's not working show it in settings .
Drewmk20 said:
Unfortunately not .....i don't have the option on security (fingerprint missing) ..... i reinstalled 6.0.1 but nothing . Now i am doing 5.1.1 with flashtools to see the result maybe there is still hope ....i see that this is the Z5C E5832 Rev 1.0 so it should have the fingerprint right ? :S or at least if it's not working show it in settings .
Click to expand...
Click to collapse
hey there.. i`m from romania too.. take a look over here http://www.androidauthority.com/no-fingerprint-sensor-for-us-xperia-z5-z5-compact-667816/ , on short .. if you have an US model you don`t have a fingerprint sensor.. where did you buy it from? your z5c ?
P.S. Tryed 2 versions of android 5.1.1 oficial but none have worked. I see the fingerprint setting now in the security part but after i imput a pin it's going back to security menu like this feature should not be in this phone .... if i test it with *#*#737...... o fingerprint sensor it will exit the test right away .
Anybody fixed this problem or should i call warranty ?
Can't you flash firmware from different region via Flash tool?
Sent from my E5823 using Tapatalk
@bushako - i think i allready did reinstalled a 5.1.1 for central Europe but please leave me a link for a country like Romania if you can so that i can try again . Cheers !
Google Xperifirm and download the ROM for other regions.
Sent from my E5823 using Tapatalk
Drewmk20 said:
@bushako - i think i allready did reinstalled a 5.1.1 for central Europe but please leave me a link for a country like Romania if you can so that i can try again . Cheers !
Click to expand...
Click to collapse
Any news?
I'm facing the same issue on a Swiss phone.
I tried to flash the stock EU (Swiss) FW, but nothing changes.
Hello fellas. Lost my old account.
I got here a Note 5 N920c. (Saudi Arabia) I cant download its latests firmware from SAMMobile. If anyone got a better mirror please provide. It has to be latest as i already flashed an older one and now im stuck on Error window saying i need to use Smart Switch recovery..which I tried..ky phone didnt showed up. Any help would be great.
Regards.
attached Odin log.
khurryja said:
Hello fellas. Lost my old account.
I got here a Note 5 N920c. (Saudi Arabia) I cant download its latests firmware from SAMMobile. If anyone got a better mirror please provide. It has to be latest as i already flashed an older one and now im stuck on Error window saying i need to use Smart Switch recovery..which I tried..ky phone didnt showed up. Any help would be great.
Regards.
Click to expand...
Click to collapse
i need help about that too
I flashed my samsung a310f down on stock firmware android 6.1 to bypass google, since that im not registered in network, i researched now for 2 days and could not find a solution..
i already flashed it again on the firmware it was before and now even on a custom rom.
But still same issue. can some one help me pls its very important for me
pls explain it step by step im a newbie to this stuff
thanks for taking time to answer <3
mojjo007 said:
I flashed my samsung a310f down on stock firmware android 6.1 to bypass google, since that im not registered in network, i researched now for 2 days and could not find a solution..
i already flashed it again on the firmware it was before and now even on a custom rom.
But still same issue. can some one help me pls its very important for me
pls explain it step by step im a newbie to this stuff
thanks for taking time to answer <3
Click to expand...
Click to collapse
Hi , if you have removed FRP lock , dial *#06# to see if your IMEI is showing up if not , then you broke partitions on which is stored IMEI and all information for phone .
What you can try is to flash latest 4 file repair firmware for your region with pit file using ODIN ...
Find on the internet those files : )
Teddy Lo said:
Hi , if you have removed FRP lock , dial *#06# to see if your IMEI is showing up if not , then you broke partitions on which is stored IMEI and all information for phone .
What you can try is to flash latest 4 file repair firmware for your region with pit file using ODIN ...
Find on the internet those files : )
Click to expand...
Click to collapse
here i found these, but i dont know which one i need, are they both the same?
http://www.tsar3000.com/index.php?o...ader-csc-pit-files&catid=55:samsung&Itemid=82
this one A310FXXU1AOLE / VFG1AOL2 v5.1.1: Download
or this one A310FXXU1APB7 / OXY1APB7 v5.1.1: Download ??
thank u so much for help
mojjo007 said:
here i found these, but i dont know which one i need, are they both the same?
http://www.tsar3000.com/index.php?o...ader-csc-pit-files&catid=55:samsung&Itemid=82
this one A310FXXU1AOLE / VFG1AOL2 v5.1.1: Download
or this one A310FXXU1APB7 / OXY1APB7 v5.1.1: Download ??
thank u so much for help
Click to expand...
Click to collapse
Don't use Lolipop at all because you will probably broke bootloader , because Samsung has prevented Downgrade from Android 7 or 6 to android 5 because of secure bootloader .
Send me what was original firmware before downloading which region and that ? : )
mojjo007 said:
I flashed my samsung a310f down on stock firmware android 6.1 to bypass google, since that im not registered in network, i researched now for 2 days and could not find a solution..
i already flashed it again on the firmware it was before and now even on a custom rom.
But still same issue. can some one help me pls its very important for me
pls explain it step by step im a newbie to this stuff
thanks for taking time to answer <3
Click to expand...
Click to collapse
here's a useful link to download a recent firmware for your device
https://updato.com/firmware-archive-select-model?exact=1&q=SM-A310F
Hi Everyone,
Apologies in advance, i'm a noob at all this but please read my post. I just need some help
Recently i've attempted to install a custom ROM on my Galaxy S8 ( SM-G950F ) and in the 1st attempt, managed to somehow get the phone into a boot loop. I went on to flash the original firmware via ODIN, which was successful and the phone was back to original, but now i have an issue when trying to use Google Pay, or Netflix. It keeps saying the phone has been modified and not allowing me. Is there a way around this at all? I don't understand why it's now not working since it's back to stock firmware. If anyone can help me out that would be greatly appreciated. I'm willing to provide some $$ if needed.
Thanks all in advance.
Hi , put your phone in Download mode and check System status is Official or Custom ?
Teddy Lo said:
Hi , put your phone in Download mode and check System status is Official or Custom ?
Click to expand...
Click to collapse
Hiya mate. It says official Samsung, but Google pay says the phone is rooted.
Hi , tell me what is your 7 and 8 number from imei and did you tried to use latest software ?
Teddy Lo said:
Hi , tell me what is your 7 and 8 number from imei and did you tried to use latest software ?
Click to expand...
Click to collapse
What do you mean 7 or 8 number from imei? The latest software is used mate that is correct.
7 and 8 number from imei is know as Country code , so look for Firmware for Country code you can also look for 4 file firmware for your device which you can search on the internet or try with DBT version is Germany but mostly German firmware can fix some issue . Good Luck
Hello, I have the same issue. I Just flash latest ROM for my Samsung Galaxy s9 plus from sammobile website. It was DBT version (UK, Germany region) with patched Odin. Can you help me how to get google pay working? It keeps saying the same that device has been rooted or modified.
I have a Galaxy s21 olympic edition with number SM-G991Q and i am not receiving montly updates. The last update was the August 2021 patch and was installed on August 30th.
Also smart switch on Windows is not detecting Any new updates.
I tried to reset the device without luck getting new updates.
Does anybody has the same problems with the Galaxy s21 SM-G991Q not receiving updates?
I have this phone too, I also only got the August security update.
Don't worry, they probably lost their update schedule before switching to Android 12. I got updates yesterday for SM-G9910.
I have the same phone and find it odd that it doesn't show up on sammobile or anywhere else.
Does anyone know where to find original firmwares for it?
I have too G991Q and I need flash to XAA because I need BAND 20 LTE my country help me pls or altwrnative stock ROM?
OK I solved writing on Mobile S21 G991Q 4G LTE Slovakia Band 20 ALLOWED
DirgiEx said:
OK I solved writing on Mobile S21 G991Q 4G LTE Slovakia Band 20 ALLOWED
Click to expand...
Click to collapse
how did you solve the problem? I need band 20 too
TZS03 said:
how did you solve the problem? I need band 20 too
Click to expand...
Click to collapse
[Guide] Service Mode and CSC Guide/Enable LTE/5G Bands and Services/5G Low Band on U1
Hello All, Many people have asked about service mode and CSC related questions and I thought we should get a discussion going that is all in one place. *DISCLAIMER* I do not take any responsibility for any issues that may occur from changing...
forum.xda-developers.com
DirgiEx said:
[Guide] Service Mode and CSC Guide/Enable LTE/5G Bands and Services/5G Low Band on U1
Hello All, Many people have asked about service mode and CSC related questions and I thought we should get a discussion going that is all in one place. *DISCLAIMER* I do not take any responsibility for any issues that may occur from changing...
forum.xda-developers.com
Click to expand...
Click to collapse
Thank You! finaly works
TZS03 said:
Thank You! finaly works
Click to expand...
Click to collapse
Well on november 8th i finally got the october 2021 update. Hopefully the android 12 update will follow zoon
I have a question about the G991Q, did any of you get the ESIM to work yet? It is currently software locked - in theory it should have it because it is a Snapdragon chip
Do you have Android 12 on G991Q already? Im checking every day but still no luck Should I install non olympic rom? Will that work? Thanks
@Corbik
This particular variant has yet to receive the stable One UI 4/Android 12 update.
@jussy
See here; the model number of this variant is SM-G991Q and the CSC is SJP. At the time of posting this, the latest available firmware version is G991QOPU1AUJ2.
my version is g9910 and still no update to android 12.
last version a11 octuber security update....
whats happend....
What standard version would be closest to G991Q? I tried to flash U1 ROM but no luck
Friends i'm also with the SM-G991Q olympic version.. I really need to switch to CSC from ZTO, to try to use VOLTE and WIFI CALLING from my operator in my country, Brazil!
Can someone please help me change CSC to ZTO ? I tried the tutorial above, but it doesn't open anything when typing the codes, were you able to change? I saw that it only works on android 10. but we are on android 11.
I saw that you have the option to change CSC ANDROID 11 via Samkey, but I believe it still doesn't have support for our SM-G991Q device.
@TZS03 @DirgiEx @SkandaH
Corbik said:
What standard version would be closest to G991Q? I tried to flash U1 ROM but no luck
Click to expand...
Click to collapse
Have you tried switching to another S21 variant's ROM with Snapdragon 888? it worked out ?
If it doesn't work, I think I found our ROM to perform restoration via ODIN, in brink event:
https://samfrew.com/pt/download/Galaxy__S21__5G__/zq1d/SJP/G991QOPU1AUJ2/G991QQOP1AUJ2/
jominguta said:
Have you tried switching to another S21 variant's ROM with Snapdragon 888? it worked out ?
If it doesn't work, I think I found our ROM to perform restoration via ODIN, in brink event:
https://samfrew.com/pt/download/Galaxy__S21__5G__/zq1d/SJP/G991QOPU1AUJ2/G991QQOP1AUJ2/
Click to expand...
Click to collapse
Yes I tried the U1 version since it should be US version with Snapdragon888.
That ROM you found, based on the numbers is exactly what is in my phone now.
I think I will just wait some more time to get official Android 12 update, hopefully our special version wont be forgotten
But If somebody know which ROM would also work for SM-G991Q and ideally would also support all languages and features (esim for example) please share
Corbik said:
Yes I tried the U1 version since it should be US version with Snapdragon888.
That ROM you found, based on the numbers is exactly what is in my phone now.
I think I will just wait some more time to get official Android 12 update, hopefully our special version wont be forgotten
But If somebody know which ROM would also work for SM-G991Q and ideally would also support all languages and features (esim for example) please share
Click to expand...
Click to collapse
True, I hope we don't forget... friend know how I can change CSC to ZTO ?