Hi,
I need help with flashing a ZTE Nubia M2 Lite. I have the stock ROM and TWRP recovery. When I install the ROM via TWRP the phone won't boot - it's stuck at the boot logo. I left it for a long time (for a first boot), but still no luck. I think I have to completely flash the phone with SP Flash Tool. In order to do that I need a working scatter file. The Stock ROM has a scatter file (attached), but it won't work with SP Flash Tool. Can someone please provide me with a working scatter file from a working phone. Appreciate any help I can get. Thank you in advance.
Best regards,
djuby
djuby said:
Hi, I need help with flashing a ZTE Nubia M2 Lite. I have the stock ROM and TWRP recovery. When I install the ROM via TWRP the phone won't boot - it's stuck at the boot logo. I left it for a long time (for a first boot), but still no luck. I think I have to completely flash the phone with SP Flash Tool. In order to do that I need a working scatter file. The Stock ROM has a scatter file (attached), but it won't work with SP Flash Tool. Can someone please provide me with a working scatter file from a working phone. Appreciate any help I can get. Thank you in advance. Best regards, djuby
Click to expand...
Click to collapse
I don't have this device but, the following thread is probably the only one that will come close to obtaining some member guidance since there's not many threads out there for this device.
https://forum.xda-developers.com/showthread.php?t=3689170
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
As the title says, I just can't find any tread talking about how to root my ZTE nubia m2 lite. I don't know if it's already possible on this device, but I really would like to root it. If rooting is possible, I'd like also to know if there's a way to install TWRP recovery. Remembering that my version is ZTE nubia m2 *LITE* (NX573J).
Nubia m2 lite rooted now bricked.
Hi
Klein.miqueias
I have a nubia m2 lite and my device was rooted. last months during update Android 7.1 I bricked my device. Now its just stuck on nubia logo. I have sd card stock rom but it's not working because recover mode also not working. Now I need a sp tool supported rom. can you backup your device rom by sp tool and give it to me.
Thanks
Hi, I had the same problem then you days ago and I think it's the same problem of the inicial thread.
As there's less content about our Nubia m2 lite I had to find a solution by myself. I also couldn't find a scatter file that was accepted by Sp flash tools, but I used the same scatter of a LeEco smartphone to install only the TWRP recovery that I took from a GizChina rom. I'm gonna let the files to you download.
The paths are:
1. Install Mediatek USB driver.
2. Open SP flash tool and choose the scatter file that's in the folder and click in download.
3. Plug your Nubia m2 lite in USB cable and let the program make the job.
The smartphone is going to boot the Nubia logo and after apear the charging percentage. The SP flash tools it will not say that the process has ended, so just unplug the smartphone and turn on in recovery mode (vol up + power button). This vertion of TWRP recovery has a bug so after doing this it's going to apear the Nubia logo and the screen turns off so you press again vol up + power button that the TWRP recovery screen will apear. Now you just install the rom you have.
Although it doesn't seem to work, beleave me, it worked for me.
I hope you got it.
Files to donwload
https://drive.google.com/open?id=1-g5UrqyT-PwkHMLwQqX6RDdX6xNyg5eZ
Nubia m2 lite bricked.
Thanks for your kind response. Did you try this method on nubia m2 lite? Can you give me the download link of scatter file.
---------- Post added at 07:20 AM ---------- Previous post was at 06:44 AM ----------
Have your nubia m2 lite is okay now.
how to make a scatter file?
Rizuke
Do you have nubia m2 lite.
Anyone that wants the files just contact me that I send it by email because I'm having problems to upload the files and I can't public any link yet.
Plz give me that scatter file.. plz send me to my email
[email protected]
Nubia m2 lite bricked.
Hi
Klein.miqueias
Waiting for your Nubia M2 Lite sp tool backup rom.
Klein.miqueias said:
Anyone that wants the files just contact me that I send it by email because I'm having problems to upload the files and I can't public any link yet.
Click to expand...
Click to collapse
Plz give me that scatter file.. plz send me to my email
[email protected]
Nubia m2 lite bricked.
Does anybody has Nubia first aid emergency tool for MTK chipset.
Pls give me that scatter file..Nubia M2 Lite. Pls send to my email
[email protected]
Nubia m2 lite bricked.
Is there anyone who can help me to unbricked Nubia M2 lite.
Urgent of Scatter File
Klein.miqueias said:
Anyone that wants the files just contact me that I send it by email because I'm having problems to upload the files and I can't public any link yet.
Click to expand...
Click to collapse
Please send me scatter file of Nubia M2 lite email: [email protected]
e-mal
Klein.miqueias said:
Hi, I had the same problem then you days ago and I think it's the same problem of the inicial thread.
As there's less content about our Nubia m2 lite I had to find a solution by myself. I also couldn't find a scatter file that was accepted by Sp flash tools, but I used the same scatter of a LeEco smartphone to install only the TWRP recovery that I took from a GizChina rom. I'm gonna let the files to you download.
The paths are:
1. Install Mediatek USB driver.
2. Open SP flash tool and choose the scatter file that's in the folder and click in download.
3. Plug your Nubia m2 lite in USB cable and let the program make the job.
The smartphone is going to boot the Nubia logo and after apear the charging percentage. The SP flash tools it will not say that the process has ended, so just unplug the smartphone and turn on in recovery mode (vol up + power button). This vertion of TWRP recovery has a bug so after doing this it's going to apear the Nubia logo and the screen turns off so you press again vol up + power button that the TWRP recovery screen will apear. Now you just install the rom you have.
Although it doesn't seem to work, beleave me, it worked for me.
I hope you get it.
Anyone that wants the files just contact me that I send it by email because I'm having problems to upload the files and I can't public any link yet.
Click to expand...
Click to collapse
Hello,
Can u send it to my email?
[email protected]
Nubia m2 lite bricked.
Have this given method work for anyone.
I already tried this method but nothing done.
Just try this https://www.needrom.com/download/nubia-m2-lite/
Nubia m2 lite bricked.
It's not working
Related
Hi, I was trying to use Flash tool and Don't know what happend but My Phone is completely DEAD right now even power button is also not working no screen is there (just blank phone).
I am having UMI X2 2GB rom, 32 gb internal memory, 1.5 GHZ (MT6589T) Model.
I tried to use SP Flash tool to recover my phone. Firstly I tried to format the phone, After that I tried to run the correct scatter file for MT6589 (from one of the ROM Posted under UMI-X2).
Drivers for the SP Flash tool is loaded correctly (into my Windows 8 Pc). I was previosly getting error as follow : SP FLASH TOOL ERROR: (8200)
[Platform Error] The load and target are inconsistent!
Now, after searching a lot I found that its something wrong with SP Flash tool version.
So I downloaded SP Flash Tool V3.1304.O.sn119 version. After that I am trying to "Download" the rom (with the correct scatter file for my ROM). but its only showing me RED Bar (with 100%) and after that it does nothing. Its neither showing me any error nor its continuing the process.
I am in serious problem here. Please help me out.
Thanks in advance!
- Umang
umang_nine said:
Now, after searching a lot I found that its something wrong with SP Flash tool version.
So I downloaded SP Flash Tool V3.1304.O.sn119 version. After that I am trying to "Download" the rom (with the correct scatter file for my ROM). but its only showing me RED Bar (with 100%) and after that it does nothing. Its neither showing me any error nor its continuing the process.
I am in serious problem here. Please help me out.
Click to expand...
Click to collapse
Try this version of :
SP Flash Tool
October Official Rom
USB Drivers (if needed)
Works for me.
Necro thread...
I have the same issue.
A couple of days ago the phone just started turning off / locking up when off, and having great difficulty tuning on... i.e. pulling out the battery for a minute or a few times.
Now the phone won't turn on at all. They only sign of life is the charging animation when you plug it in.
Prior to all this, there appeared a window in Chinese with some options. my GF (who's phone it is) just pressed something, no idea what. But she said something about 'drawing on the screen'??? sound like something locked up and the previous frame wasn't deleted from the frame buffer before redrawing the new one... I have no idea.
Anyway, I tried going into recovery to see if there was anything I could do there, unfortunately everything was in Chinese, so not much help. for some reason now, the recovery isn't even working.
Now I can connect to the phone via SPflash, but I get the above response: '[Platform Error] The load and target are inconsistent!'
Some other ROMs I tried give me this response:
'The load to be downloaded is for MT6589;
The target platform is MT6582_S00'
Which is quite suspicious.
Any ideas?
Thanks
hisense HS-U980 bricked....
hi,i have the smartphone hisense hs-u980 with mt6589 or mt6589t, i dont understand.... so, i briched with sp.flash tool and now is ompletly dead,,, can i have ur help-sipport please?
thank u very much
Hs-u980 complete dead/bricked
carretto76 said:
hi,i have the smartphone hisense hs-u980 with mt6589 or mt6589t, i dont understand.... so, i briched with sp.flash tool and now is ompletly dead,,, can i have ur help-sipport please?
thank u very much
Click to expand...
Click to collapse
i have ur same phone and i have ur same problem,my pkone is dead later flash any wrong miui rom from cwm recovery and now is dead,i dont have any idea where is original firmware for sp.flash tool or other how piranha box,please,anyone can please me??? THANK U for read!!!!
I have the same Problem. So frustrating men. If anyone finds a solucion please email me [email protected] ...
SP FLASH TOOL ERROR: (8200)
As i connect my phone it disconnects after 2 seconds..
Please give me a site to download scatter file for my micromax a 310
Unpack the rom to a folder then unpack SPFT start SPFT, Select and load scatter file from rom folder, press download,Then connect the powered off V785 phone to the usb cable.
Original Stock rom
http://www.mediafire.com/download/hoaken3645l0r3c/ot-V785-2AVDEG1_Original_SPFT_ROM_by_bRkA.7z
flash tool
http://www.mediafire.com/download/q5zrm94o4in1ga8/SP-Flash-Tool-v3.1344.0.212.7z
bricked my vodafone 785
hello...do i have a hard brick {vodafone smart mini 4:crying::crying:}?i flashed wrong boot image then i formatted with sp tools by mistake(i know,dump hey) so now i think my backup is corrupt,most files short...so can u pliz upload a sp flash tool backup plllizz i beg u...or preloader file....thanx
MTK Flash Tool dump of Alcatel OneTouch 4033 ...........Just build prop edit it back to vodafone 785 once flashed if it bugs you. <<<< What is the format of this file ??? OK ARC compressed managed it...
I've got bricked Vodafone 785 and I think only spflash will help me but I don't have any stock rom
Please help ?
EDIT:
Someone did format phone .... sp flash works but only Alcatel popc3 logo and recovery is avaible... after spflash I have broken partition table .... I don't know what to do :/
H_C_K said:
Someone did format phone .... sp flash works but only Alcatel popc3 logo and recovery is avaible... after spflash I have broken partition table .... I don't know what to do :/
Click to expand...
Click to collapse
Check it out:
gsmpro.com.pl/serwis/item/190-vodafone-785-smart-4-mini-naprawa-firmware-imei-polskie-menu-usuwanie-blokad-root
HEELP!!!
I was trying to put the nav bar (qemu.hw.mainkeys=0) in the build.prop file and rebooted the phone and iit is boot loop. What can I do? I haven´t CWM because I didnt find it, and I dont find the drivers of the phone.
Please help me it is a new phone ( 2 weeks) and my mum wont ever buy me a smartphone anymore .:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Is there a way to get fota updates for this device as a regular download through pc? If so, could someone please point me to the location? I need the latest update zip for this phone (i think from nov/dec 14) in german.
HI, I followed the instructions above, but I can't get the o.s. Just have the clockworkmod recovery now, so the vodafone 785 doesn't start. I also tried to put the backup folder into my extsd but I'm not able to restore the smartphone from the backup you uploaded (from cwm recovery), because it says "no file". Please can you help me?
Does this work? Anyone confirm?
CWM Backup of Vodafone Smart 4 Mini stock rom with modded CWM recovery, Thanks to fulgerul46 for posting.
Link
---------------------------------------------------------
Click to expand...
Click to collapse
Hello guys.
I really need this file to restore my phone can someone reupload it somewhere or pm me a link?
Thanks in advance.
I have a new vodafone smart 4 mini UK PAYG with 4.4.2
and another with 4.2.2.
Cant get it to update to same as other one ie 4.2.2 to 4.4.2
using OTA as both say they are uptodate.
Am newbie.
I guess copy firmware from one to the other somehow
and pass a copy to stock firmware archives.
Phone is DEAD. Don't Flash Flashtool File...
Can anyone explain what is to be done is phone is dead ? Totally confused !
I create fw 4 you
ex.ua/163049604103
Anyone? VF785 stock rom?
suslix78 said:
I create fw 4 you
ex.ua/163049604103
Click to expand...
Click to collapse
Where is the file please I need it.
CWM Backup of Vodafone Smart 4 Mini stock rom with modded CWM recovery, Thanks to fu
" CWM Backup of Vodafone Smart 4 Mini stock rom with modded CWM recovery, Thanks to fulgerul46 for posting."
Any chance we can get a re-up of this ROM, link is dead. Thanks!
Vodafone smart 4 mini doesn't start
Hi
I bought brand new vodafone smart 4 mini and first I did was root to unlock phone, next a very stupid idea came to my had to update software, after that my phone worked terreble, so another stupid idea came to my head to flash oryginal ROM, I downloaded rom, SPFlash tool , load scatter file and pressed download, everything looked good, it took about one minute and green circle ok at the end. I was verry happy, for couple seconds only, my brand new phone never started again. there was only short blink when I pressed power button , and then nothing. I've been trying to flash the phone many times after that with couple different ROM's but no succes. sometime phone doesn't even blink after flashing. Sometimes at the begining of flashing there is mesage "no partition table" or memory error. Please somebody help me, I'm loosing hope.
I think the only good news is that the "Media Tek PreLoader USB VCOM" still works, and looks like phone cooperates with the tool, maybe I should use different tool, or test phone first with some tool, or create partitin table ?
wigor75 said:
Hi
I bought brand new vodafone smart 4 mini and first I did was root to unlock phone, next a very stupid idea came to my had to update software, after that my phone worked terreble, so another stupid idea came to my head to flash oryginal ROM, I downloaded rom, SPFlash tool , load scatter file and pressed download, everything looked good, it took about one minute and green circle ok at the end. I was verry happy, for couple seconds only, my brand new phone never started again. there was only short blink when I pressed power button , and then nothing. I've been trying to flash the phone many times after that with couple different ROM's but no succes. sometime phone doesn't even blink after flashing. Sometimes at the begining of flashing there is mesage "no partition table" or memory error. Please somebody help me, I'm loosing hope.
I think the only good news is that the "Media Tek PreLoader USB VCOM" still works, and looks like phone cooperates with the tool, maybe I should use different tool, or test phone first with some tool, or create partitin table ?
Click to expand...
Click to collapse
somebody please help
there are away by sd card if anyone can plz pm me umor.raihan skype
Thank you very much, it unbrick the phone and add Arabic language
there is Arabic language in it .
this is not working for me what exactly is supposed to happen when you plug in phone?
hello..
i was trying to root and install cwm.. and i unfortunately installed the wrong recovery now my phone does not start.. not even in recovery mode..
it shows a messege "Download and install package...........etc. press volume up to proceed down to cancel" pressing the keys don't do any thing phone gets off after a while.. i have a backup of stock recovery and boot but i think both files are same its 20mb both.. i had used Flashify to backup. and i can't even enter fastboot my pc does not detect my phone perhaps because i don't have the drivers... is it possible to fix my phone or its dead for ever..:crying::crying::crying::crying::crying::crying::silly::silly::crying:
i was following this method here.. www[dot]gizdev[dot]com/easy-way-to-root-coolpad-dazen-1/
same problem here
same problem here I try all method from google but I can't my suggestion to go service centre
fixed dazen 1
m.sajid969 said:
same problem here I try all method from google but I can't my suggestion to go service centre
Click to expand...
Click to collapse
Hey.. I have fixed my dazen 1 you can do so... Its easy.. Head to the following thread...
http://forum.xda-developers.com/che...g-boot-img-recovery-img-t3170809#post62587856
New thread..
http://forum.xda-developers.com/showthread.php?t=3236337
can we use custom recovery of same chipset phones
Hey guys,
Yureka Yunique and Yuphoria have same chipset as Coolpad Dazen 1 4g. So can we port their custom recoveries or custom rom into coolpad.??
Is there a tool or way to take full backup of Coolpad Dazen 1 4g like, boot.img, recovery.img, system.img, all radio related and other things??
Hi ,
i am trying to install ROM for coolpad dazen 1 i was selected wrong ROM ,so now my Mobil not working, not starting if u press any and at list it not recognize USB .if i connect USB it not identifying ,,plz any now to solution give me
thanks friends
modem soft bricked
Sir please help me..
I have tried volt modem of other phone. so my mobile modem was soft bricked then I tried non vote modem of yureka then my phone not detecting both sim cads sir please help me.... help me please ..please...
Shivakdl66 said:
Sir please help me..
I have tried volt modem of other phone. so my mobile modem was soft bricked then I tried non vote modem of yureka then my phone not detecting both sim cads sir please help me.... help me please ..please...
Click to expand...
Click to collapse
Same problem I faced ..
1 month ago ...
Solution :--
Flash the original stock ROM(1.1gb) with PC
RAGHAV RT said:
Same problem I faced ..
1 month ago ...
Solution :--
Flash the original stock ROM(1.1gb) with PC
Click to expand...
Click to collapse
Thanks I did it successfully.
Shivakdl66 said:
Thanks I did it successfully.
Click to expand...
Click to collapse
Ok bro
Solution
I have a solution of dead coolpad phones
I know phone is not detect in pc
So I made one boot disk to solve this its work 100%
And you phone will be revert back to its factory versions .
Solution 123 said:
I have a solution of dead coolpad phones
I know phone is not detect in pc
So I made one boot disk to solve this its work 100%
And you phone will be revert back to its factory versions .
Click to expand...
Click to collapse
If you really have solution then share it to others. It may help them to revive their android.
In my coolpad dazen 1 when I was try to flash new software it stop at 11%. What should I do? Plz help me. I tried both stock room software.
bricked my coolpad dazen 1
recently i was trying to remove root text from boot screen.my coolpad got bricked and when i try to start it runs in download mode only no recovery is loading.also the device is not flashing with ygdp tool.i have tried many methods but nothing is working plzzzzzzzzzzzzzzz................... help me.
got it working
devendra singh panwar said:
recently i was trying to remove root text from boot screen.my coolpad got bricked and when i try to start it runs in download mode only no recovery is loading.also the device is not flashing with ygdp tool.i have tried many methods but nothing is working plzzzzzzzzzzzzzzz................... help me.
Click to expand...
Click to collapse
i have managed to get my coolpad dazen 1 back to life.what i have done is flash different partition with fastboot.
if ur coolpad boots in download mode and secure phone is written and cant be flashed with ygdp tool.there this method is applicable.
like fastboot flash (partition) (file name) .for example "fastboot flash system system.img".if u r confused let me explain widely-
1.I have coolpad stock firmware in .cfb file.you can download it from internet.
2.I installed ygdp tool latest version.To copy data of firmware.you can copy it just load the .cfb file in ygdp tool.Do not flash with it just load the firmware in ygdp tool now when checking is done. go to your ygdp tool installation directory like "c:/ygdp".where ygdp tool is intalled. go to folder downfiles there u will find a folder named 8297l-100 copy it to another safe location.
3.now open partition.xml file in 8297l-100.there u will find partition name and file name.
4.go to ur adb or fastboot folder.
5.open a cmd window by "shift+right click".
6.now command fastboot devices.if ur phone is detected u can flash the partition manually.like fastboot flash (partition name) (file name).
7.partition name should be named correctly otherwise it will fail.
"Tools " u will need-
1. coolpad dazen 1 drivers for pc
2. adb drivers for coolpad dazen 1.
3. ygdp tool latest
thats all folks hope u will able to unbrick ur dazen 1
devendra singh panwar said:
recently i was trying to remove root text from boot screen.my coolpad got bricked and when i try to start it runs in download mode only no recovery is loading.also the device is not flashing with ygdp tool.i have tried many methods but nothing is working plzzzzzzzzzzzzzzz................... help me.
Click to expand...
Click to collapse
jackey31 said:
hello..
i was trying to root and install cwm.. and i unfortunately installed the wrong recovery now my phone does not start.. not even in recovery mode..
it shows a messege "Download and install package...........etc. press volume up to proceed down to cancel" pressing the keys don't do any thing phone gets off after a while.. i have a backup of stock recovery and boot but i think both files are same its 20mb both.. i had used Flashify to backup. and i can't even enter fastboot my pc does not detect my phone perhaps because i don't have the drivers... is it possible to fix my phone or its dead for ever..:crying::crying::crying::crying::crying::crying::silly::silly::crying:
i was following this method here.. www[dot]gizdev[dot]com/easy-way-to-root-coolpad-dazen-1/
Click to expand...
Click to collapse
bro go to this link-https://forum.xda-developers.com/android/help/coolpad-dazen-1-dead-plz-help-t3178510/page2#post71688300
dead
hey my coolpad dazen 1 is completly dead it does not show any mesage when connected to pc via data cable nd pressing vol up nd power button. how can i make this working
what happened to ur hanset before it gone dead pls explain
please help me this is between live and death. I bought a coolpad 8715 but the android version doesn't work with Playstore and everything about it is in Chinese, I try to change the language to English but the apps are still written in China. please how can I install another OS on it that support Playstore. I downloaded the firmware ( 8715_4.4.016.P1.8715.CPB ) which is in CPB format and i try to extract it to change application and some settings, after extraction I found some files but I don't know which one to edit or how to. The help I needed is that, how to edit my firmware .....CPB file after extraction and pack it back as .......CPB file so that I can use it to flash my coolpad 8715. Or is their any OS or ROM I can use like KitKat, lollipop, marshmallow miui etc. I try to update the phone with wireless hotspot, not working. I also try to install KitKat 4.4.2 Custom ROM through the phone recovery mode which is in China, but showing verification failed and signature error. please help me what can I do, am ready to take any ricks.
King smus said:
please help me this is between live and death. I bought a coolpad 8715 but the android version doesn't work with Playstore and everything about it is in Chinese, I try to change the language to English but the apps are still written in China. please how can I install another OS on it that support Playstore. I downloaded the firmware ( 8715_4.4.016.P1.8715.CPB ) which is in CPB format and i try to extract it to change application and some settings, after extraction I found some files but I don't know which one to edit or how to. The help I needed is that, how to edit my firmware .....CPB file after extraction and pack it back as .......CPB file so that I can use it to flash my coolpad 8715. Or is their any OS or ROM I can use like KitKat, lollipop, marshmallow miui etc. I try to update the phone with wireless hotspot, not working. I also try to install KitKat 4.4.2 Custom ROM through the phone recovery mode which is in China, but showing verification failed and signature error. please help me what can I do, am ready to take any ricks.
Click to expand...
Click to collapse
buddy pls tell us if
1. The phone is rooted.
2. The android version is factory or you installed it.
3. You are flashing the rom in stock recovery or other recovery.
When you bought it what was the android language?
If you are having trouble with flasing i advice you to use pc tools. Because in phone you will need to root the device first. If you well know the conditions of root. :good:
Code:
**** DISCLAIMER ****
This post is an EXPERT-LEVEL Post.
I am NOT RESPONSIBLE for what you do to your device.
Please not that I am still working on a solution to this brick.
Hello XDA-Developers,
I recently got my hands on a Meizu M3 note and, of course, wanted the newest - nougat - firmware on it. It seems I accidently flashed a incompatible (or currupted) Update (flashed an A Firmware on a G version phone). Sadly it broke down and showed only vertical stripes on it's display.
Image here: https://ibb.co/cpGunm
After some hours research I found some information on how to reflash the M3 note via SP Flash Tool here and here. Since the first tutorial is for the M3 and M3s and the second tutorial is for the M model of the device (I've got the L model) there are some changes needed for it to somehow magically work.
I exchanged files provided (such as preloader.bin, lk.bin etc) with the matching ones from the latest Official Global Firmware from Meizu. Just extracted them out of the update.zip. (Don't forget to select the Authentication File!)
Image here: https://ibb.co/k3zYDR
Short flashing tutorial: make sure your device is turned off and disconneced then click "Download" and connect your device via USB. Don't worry if it now shows an error like "Download DA Failed", just dismiss the error and click "Download" again. It should flash the device now.
Sadly it is not possible to flash the boot.img provided in the latest official update.zip from Meizu (you'll get an security mismatch error). BUT the boot-verified.img provided by the chinese archive is flashable and is accepted by the device. The device is now in a bootloop, fastboot is accessible via holding Vol - and Power, but no recovery access via Vol+ and Power
The files seem to be repaired now but the display still shows these stripes - I think the firmware actually fried something on the display chipset. I bought a replacement screen and then will update this thread as soon as possible. If you have any Ideas of how to unbrick the device feel free to discuss.
Update 18.11.2017
Thanks to @ncristian !
I did as he suggested, downloaded and flashed the files from the russian forum here (if you do not speak russian and want to get straight to the point: Direct Download Link)
I still have the stripes on my screen but the device booted up successfully and got recognized again by my computer! While booting up I could see the stripes changing their color slightly as the bootanimation of flyme was playing. I guess I will have to replace the screen to make the display error go away... I will update this post as soon as I did so
Update 10.11.2018
Sadly I never actually exchanged the screen, I'm running a Pro 7 Plus as a daily driver now and I'm loving it
Update 19.05.2019
I have attached the boot-verified.img as someone requested it
I had the same problem and I solved thanks to this: https://4pda.ru/forum/index.php?showtopic=739028&st=24480#entry65580668 and Google Translate; I downloaded the .zip, installed drivers, launched the flash tool and flashed files contained in the folder L691H (Remember to install drivers and disable antivirus or it will not work). Then I downloaded FlyMe 6.1.0.0G, went into recovery with vol up + power, copied the update.zip into the device "Recovery" and flashed it; the only problem I had is that the phone charged but he didn't recognize the battery level; by reflashing the files contained in the 4pda .zip, the battery level went up (obviously, after leaving the phone charging for about an hour).
Someone please help my meizu m3 note bricked after flashing flyme 7.8 beta.
Rajdas26 said:
Someone please help my meizu m3 note bricked after flashing flyme 7.8 beta.
Click to expand...
Click to collapse
Try reflashing via the original recovery, that might be your easiest solution. If that doesn't work you might try your luck with something like SP flash tool
Hey. Uhmm i know it's an olld post but i'm hopeless now. I need the boot-verified img you have. i can't find it anywhere. can you send it to my gmail ?? [email protected]
shawn_mendes said:
Hey. Uhmm i know it's an olld post but i'm hopeless now. I need the boot-verified img you have. i can't find it anywhere. can you send it to my gmail ?? [email protected]
Click to expand...
Click to collapse
I have attached the file to the first post. Good thing I never delete anything :angel:
m3shat said:
I have attached the file to the first post. Good thing I never delete anything :angel:
Click to expand...
Click to collapse
First of all, thank you mate I successfully downloaded the boot verified. But still it didn't turned on. Just no power but recognized by the sp tool. I'm starting to think that downloaded again the wrong firmware. I also found out that their are two main board(or whatever is that). So this global firmware can be flashed in the both L and M series. I'm wondering what firmware you used to flash. Again, thank you in advance ^_^
l got same problem .. (because I'm not read careful )l tired to flash using many firmware or using boot verified .. i tired that for 2 Days.. So l give up.. take my device to profesional service . and solved. solved with Emmc repair ..
my device is L681H.
My oppo a5s is hard bricked because I flashed a twrp image using root essentials on my rooted oppo a5s containing mediatek mt6765 chipset. It is not turning on after i rebooted it and no response when plugged to charge.It gives me brom error 0xc6000005 errors on flashing with sp tool and i dont have a perfect scatter file for this device.I have dump rom files downloaded from internet but i dont know how to write it to phone, i also downloaded official firmware which contain .ofp file and a download tool with require oppo official login.I think i hard bricked it and i think i corrupted the preloader and i am too tensed and helpless untill i remembered about my favorite forum xda, you are my last hope .i also used a miraclebox crack v2.89 in pc and its latest version is only supporting my phone giving me error boot not found or bad cpu, i also used msm dowload tool downloaded from youtube and it is not recognising the device as a com port. please help me in this time of corona virus as this phone is only method of contacting anyone in case of an emergency situation.please contact me in email at [email protected] or reply to this post quickly
i am very freaked out and i needs help !!!
Have u fixed it yet?
u fixed it yet? i hard bricked my a5s too