Hello, I was using my phone the other day then out of nowhere the screen went black and will no longer turn. I have attempted the recovery and also the download menu but still no response. If i connect the device to my PC via USB and hold it the power button it shows up a device with the name Exynos8890 but that disappears seconds later.
Hope someone can help because the phone is no longer under warranty unfortunately thank you to anyone who post in advance.
Sound like your emmc chip memory is broken , but if you are using Windows 32 bit system or if your pc support Virtualization , instal Win 7 32 bit on your virtual machine and follow this post from zogu .
https://forum.xda-developers.com/galaxy-s6/general/guide-repair-hard-bricked-devices-t3573865
I have the sm-g935a and I used a modified version of Odin to install a root and it said it passed and started to reboot and now it just flash's the start up screen. I tried flashing the original firmware but laptop doesn't recognize it anymore
Related
hello
Thank you for having treated this thread because i didn't find any solution in the net and the only forum i feelt that he is good and i will find the help is yours so please i want your help.
I have nextbook premium 8 se and i use it well suddenly it shutdown and do not respond I did a long press on power but nothing i tried to do a reset with that little thing in the corner but nothing i tried to get access to recovery mode with pressing power and sound + but nothing it always blocked in the first logo. by the way my tab was rooted using the methode linked in " www"dot"freaktab"dot"com/showthread.php?6674-Amlogic-Next8HD8G-(NX008HD8G)-Modified-Recovery-Stock-Rom-amp-Flashable-Root " i used the modified recovery and the root package and it worked well with super su.apk.shoretly my nextbook premium 8 se c'ant boot can't have access to recovery mode to do a hard reset can't be open at all and stil freeze in the first logo until i long press the power so that it shutdown and the battery and tha charger ac worked well and the led also .
I followed many threads some use aml flach some use rk29upgrade.exe but my problem was that i didn't have a full rom package. also i tried to connect my tab with my pc so that i plug the usb and press power and sound - until my pc shows a new unknown device and failed in getting driver and in the device manager it shows M3-Chip after a long search i installed the driver libusb-win32-bin-1.2.6.0 so my tab was named worldcup device but still not detected by aml flach and also rk29upgrade !!!!! I didn't know what should i do i am a beginner in android world so i reach these information after a long nights in the net so please i need your help guys i know that you can do it !!!
brick
you now own a brick if you flashed an incomplete rom package.......you need the fastboot files, etc yada yada from who ever makes that tablet....then maybe just maybe you can turn your beautiful new brick back into a little android man once again...
I guess I cant post the stupid link but google android SDK tools and go to that website and download the tools and install the basic package for your tablet and make sure google usb drivers are checked when downloading it all.....you need that google driver so you can install it on your windows system so your computer can read the tablet....anyways do that install driver in windows device manager under that unknown device and then reboot everything and you should have a generic android driver now installed..............you flashed root so you never set up SDK so im guessing you don't have a clue as to why you bricked your phone but hopefully this will help.....if you do unbrick it then you have to use that link you posted....his stock rom and flash that over what you have on there right now and you should just stop trying to flash stuff until you have a clue as to how to fix the device BEFORE you start.....
Hi guys, I recently purchased a Homtom HT3 for my mother, when it arrived to me I charged it and checked it out a bit just to make sure everything was fine which it was.
She collected it from me the next day and told me she'd start to use it the day after, she calls me up the next day and tells me there's some problems with it and a few people at her workplace tried to fix it for her to no avail. I pick the phone back up and I notice that everytime I power it on, it gets stuck on the "homtom" logo.
As I don't know too much about fixing phones I only took the following steps before asking for advice here; I went into recovery mode by holding up volume and power button, the android guy with the red triangle appeared so I tapped up + power button to get into the recovery(?) menu. I wiped the phone to factory settings and deleted the cache in there but it hasn't fixed the problem.
I assume I need to flash a firmware or something to potentially fix this, but I'm unable to find an official firmware from doogee/homtom's site for the HT3. I've found a firmware that I downloaded from "chinagadgetsreviews" but I'm a bit weary to try and flash with that rom because it isn't from the manufacturer. (even if I knew how to - the only experience I have is rooting my own phone but that's when I actually had access to a working phone, not one thats stuck on a boot logo).
Sorry for the long post but could anyone guide me in the right direction here? TIA
I'm not opposed to not using official firmware, I think I use cyanogen mod(?) on my own phone. I'd just like the problem fixed in the easiest way possible.
Trying to fix it myself by flashing a rom via SP flash tools but I've ran into another problem which is stopping any kind of progress - the phone isn't detected in Windows, I can't enable usb debugging because I can't get passed the boot loop, I've tried installing the ADB driver manually which didn't seem to work (just said it didn't install correctly and left me with a yellow exclamation mark) and I tried to install it automatically via ADB driver installer but it just throws up an error that the device isn't detected.
Any help would be greatly appreciated.
Hello. I bought a Homtom HT3 and next day a done an update with sp flash tool. all gone ok, but phone now wont to turn on. I contact homtom and got all drivers and room to fix it. Now i have a problem , i hit download on flash tool , take off battery + pres volume down + conect phone on usb cable. My computer detect it as USB MTK PORT sp flash tool load only the first red line but not detecting phone info, then after 1 minute i get
s_ft_da_no_response(4001) da didn't send response data to flash tool.
I changed drivers port even to MTK preloader, but i get same error.
NOTE....... All drivers and rom i got original from HOMTOM.
Thanks to all who can help me.
I can show a screenshot if need.
Same here - any solution for this problem?
Kleos89 said:
Hello. I bought a Homtom HT3 and next day a done an update with sp flash tool. all gone ok, but phone now wont to turn on. I contact homtom and got all drivers and room to fix it. Now i have a problem , i hit download on flash tool , take off battery + pres volume down + conect phone on usb cable. My computer detect it as USB MTK PORT sp flash tool load only the first red line but not detecting phone info, then after 1 minute i get
s_ft_da_no_response(4001) da didn't send response data to flash tool.
I changed drivers port even to MTK preloader, but i get same error.
NOTE....... All drivers and rom i got original from HOMTOM.
Thanks to all who can help me.
I can show a screenshot if need.
Click to expand...
Click to collapse
hi everyone i have a 10.1 " chinese tablet on an mtk6592 cpu with 3gb ram running marshmallow . i left it plugged into my windows 10 pc that was having issues with its modified xeon cpu . basically my daughter unplugged it from the pc used it then switched t off overnight next day it hangs on android screen and doesnt boot . adb doesnt see it so im assuming usb debugging is switched off . fastboot sees it but wont flash it.
when i boot it into recovery mode nd run a test it states it has a missing xbin file and 3 modified files but my daughter swerars she didnt root it or touch anything. now when i try to apply update from sd card it goes into the os on the tablet but doesnt list any files on the sd card . i have since swapped out the xeon for an old quadcore chip and reinstalled an os but went with linux mint . now i can only see the device in fastboot but not in adb and i get a mount error when i try to connect to pc in anything but fastboot mode . im no pro but im pretty competent on pcs but ive literally zero experience on android flashing etc all ive tried so far is from 3 weeks of reading forums online but im no closer to solving my problem does anyone have any ideas what i can do on a linux os . ps flashtool doesnt recognise it as connected either.
thanks for any help in advnce
I am having same problem
Brother i am having same problem. But difference is that i did it bu mistake. I installed custom bootloader and custom recovery and usb debugging is off and now my phone is stuck at company logo. if you find and aolution please inform me too
sagarrathee77 said:
Brother i am having same problem. But difference is that i did it bu mistake. I installed custom bootloader and custom recovery and usb debugging is off and now my phone is stuck at company logo. if you find and aolution please inform me too
Click to expand...
Click to collapse
no worries dude i think my daughter knocked something on the computer because i had installed kingo root to root a couple of android boxes and it was open when i came back to my machine
strongbow235 said:
hi everyone i have a 10.1 " chinese tablet on an mtk6592 cpu with 3gb ram running marshmallow . i left it plugged into my windows 10 pc that was having issues with its modified xeon cpu . basically my daughter unplugged it from the pc used it then switched t off overnight next day it hangs on android screen and doesnt boot . adb doesnt see it so im assuming usb debugging is switched off . fastboot sees it but wont flash it.
when i boot it into recovery mode nd run a test it states it has a missing xbin file and 3 modified files but my daughter swerars she didnt root it or touch anything. now when i try to apply update from sd card it goes into the os on the tablet but doesnt list any files on the sd card . i have since swapped out the xeon for an old quadcore chip and reinstalled an os but went with linux mint . now i can only see the device in fastboot but not in adb and i get a mount error when i try to connect to pc in anything but fastboot mode . im no pro but im pretty competent on pcs but ive literally zero experience on android flashing etc all ive tried so far is from 3 weeks of reading forums online but im no closer to solving my problem does anyone have any ideas what i can do on a linux os . ps flashtool doesnt recognise it as connected either.
thanks for any help in advnce
Click to expand...
Click to collapse
Did you install mtk usb drivers? If not, try to install it for SP Flash Tool to recognize your device. I also got the same problem before but installing mtk usb drivers solved it. It's worth a try. Hit thanks if it helped you.
---------- Post added at 11:11 PM ---------- Previous post was at 11:03 PM ----------
sagarrathee77 said:
Brother i am having same problem. But difference is that i did it bu mistake. I installed custom bootloader and custom recovery and usb debugging is off and now my phone is stuck at company logo. if you find and aolution please inform me too
Click to expand...
Click to collapse
Install SP flash tool, install mtk usb drivers, download the correct rom for your device. The zipped rom should come with a 'scatter file' when unzipped. Run sp flash tool as administrator load scatter file then when sp flash tool reads your device (you can see it at the boottom of sp flash tool window), click download and wait for it to finish. That should solve to bootloop. Hit thanks button if it helped you.
i flashed my Bluewave 8 HD+(Kitkat-i flashed my tab several times before but same Stock OS) using Rockchip Batch Tool provided by the manufacturer's website(http://www.wavetablet.com/wave8hd-ma...irmwareupdates) and downloaded the Marshmallow OS.
The flashing went flawless and after it finished flashing and tried to turn ON my Bluewave Tablet(with its new Marshmallow OS),the device will just turn on with the lights but no display.tried to poke the Reset Hole to no avail. I tried to connect said Tablet to my computer and it works as a normal(working)tablet,device drivers installed.From Computer,said Tablet is now connected as a Media Player device(before was Mass Storage,same as a USB Stick inserted to port) and i can see the storage info of the tablet from the computer.
Problem:
i want to reflash my Bluewave Tablet back to its Stock ROM(Kitkat) using the same Rockchip Batch Tool but it will no longer be detected by the said Tool( all drivers were installed).
Additional Info:
Volume Buttons- NO
Home(Physical)Button- NO
thanks in advance,
Jovi
I know this is too old. but I'd like to answer this since mine got the same problem. I just did some random press both power and reset button while observing Rockchip Tool to change "1" device monitor/status fortunately it suddenly goes green then i immediately 'hit' the upgrade button with the Firmware that works with my device. and viola solves the problem.
thanks bro,i'll get back to you after doing your advice. =)
Hello guys,for two weeks now i have tried to revive this phone after the last nougat OTA update.After the updated it worked 1 day,during a phone call it completely died.
I get only 5 seconds of elephone logo and then phone turns off.
Now even my computer doesn't recognize it,only showing that unknown USB device as in the photo attached.
I have tried a lot of "how to install the driver on win10" and so on. Win7 and XP machines don't recognize it at all !!! i have all operating systems.
The thing is after the update i doubt it remained adb,mtp,usb debbuging ON.
I removed the battery hoping the SP flash/win10 will recognize it this way...no luck...
If you guys have any suggestions to revive this phone it would be deeply appreciated since i have some stuff i would like to recover from it.
Thanks in advance
Try in win 7 with sp flash tool by pressing power + vol up or down dont remember then plug in usb and flash stock 7 good luck
As i wrote above,I have tried Win7 and XP and also the "recovery mode" trick but it doesn't recognize it,Only windows 10 is giving me that message as in the photo,Windows 7 doesn't do absolutely nothing.I have flashed this phone many times with different roms and stock rom and so on.Recovery mode doesn't even work anymore.
In one sentance i can't get the phone cu comunicate with any of the 3 pc's that i have,Win XP , Win 7 , or Win 10...so SP flash is kinda useless....
Seems to be driver issue reinstall it try other usb ports and wait for windows is installing preloader driver you must use sp flash tool there is no other way to get it back to live and when you flash you must press power and vol up or down all the time....then plug in and good tip there are some threads here in forum where the technic is explained keep searching good luck