Please help me. My phone was stuck on the logo screen. I've tried to read posts on how to fix this and I can't understand anything. I've tried to press and hold power+volume up+home, nothing happens but when I try to press and hold power+volume down+home, I'm getting a screen. Please advise
Hi , press again Vol + , Home and Power button at the same time , once you feel vibration just release power button but keep pressing vol + and home button in order to enter into recovery menu . Then navigate with vol - button and go to wipe cache partition one time press power button now go to Wipe data/Factory Reset and again press one time power button and then go to reboot system now .
Thanks for answering. It’s not doing anything when I press Power+Volume Up+Home
Did this issue happen suddenly? Or while trying to flash a ROM or tweaking something else?
Related
I try like this! but I can't...
Acer Liquid E hard reset
Turn off your phone, then press and hold the Power until you feel your smartphone vibrate and/or you see the Acer logo screen. Press and hold the Volume up and Volume down buttons. Use the Volume up button to select Clean boot:YES. Press the camera button to confirm.
Help me please!
Thank you very much!
I test this with a E110 but not working.
When you hold vol up and the left send key together and power up phone and hold volup and send key you see the Android system recovery utility.
Now you can select reboot system,apply sdcard:update.zip and wipe data/factory reset.
Press and hold camera botton and power on your handset
Howto reset acer e110
HOWTO:
1.turn off
2.press left button + volume up (hold down)
3.press power button
.......and wait.......
4.select reset and wipe
5.reboot
Finish.
Please use the Q&A Forum for questions Thanks
Moving to Q&A
any guide to flash this model my phone is stuck in boot mode only ..
i found my solution
gsmgoeroe26 said:
I test this with a E110 but not working.
When you hold vol up and the left send key together and power up phone and hold volup and send key you see the Android system recovery utility.
Now you can select reboot system,apply sdcard:update.zip and wipe data/factory reset.
Click to expand...
Click to collapse
thank u so much i used this and now my acer unlocked yahoo,:good: this is working dear :good:
Use a some codes to Hard reset
1:- *2767*3855#
2:- *#*#7780#*#*
100% done by wipe data
lizz said:
HOWTO:
1.turn off
2.press left button + volume up (hold down)
3.press power button
.......and wait.......
4.select reset and wipe
5.reboot
Finish.
Click to expand...
Click to collapse
thanxxxxxxxxxxxxxxxx bro its 100% working for me...
my set is ok now from stuck on logo problem.
This is my first post and I hope it will help you to fix the problem with wrong weather widget location.
I had this problem for a while.
I have tried all the potential solutions but nothing worked.
For those who do not want to root their phone and do not want to install other weather app for many reasons i will show you the best solution that worked for me and i hope it will help other people.
First of all, back up all your settings with Kies. -It is important because you will lose ALL your data if you do not.
After that disconnect the phone from usb and go to recovery mode (press Vol. UP + Home Button + Power Button until you see the Samsung Galaxy SIII logo)
Using the Vol. Up/Down Button go to wipe data/factory reset and press the Power Button
Using the Vol. Up/Down Button go to Yes -- delete all user data and press the Power Button
Once that procedure finished and you are in the main menu of recovery mode
Using the Vol. Up/Down Button go to wipe cache partition and press the Power Button.
Once that procedure finished and you are in the main menu of recovery mode
Using the Vol. Up/Down Button go to wipe data/factory reset and press the Power Button
Using the Vol. Up/Down Button go to Yes -- delete all user data and press the Power Button
Once that procedure finished and you are in the main menu of recovery mode
Using the Vol. Up/Down Button go to reboot system now and press the Power Button
Setup your phone as you did for first time
And then connect the phone to your PC using Kies to restore the backup that you did before.
It worked for me and I have no problem at all.
*** I haven’t try all this to other SG3 such as Sprint, Verizon or Rogers. I have tried this only to the International Version of SG3 ***
Say Thanks if that solution is working.
Simple question from a newby Sony-user.
How to go to recovery mode?
1st shut down the phone
2nd push and hold power and vol - (vol down) button
after the phone start let go the power button an still hold the vol - button ,
hope i coud help
I just can't get it to work. All guides or videos I saw say you have to:
1. power off
2. hold volume down + power
3. let go when logo appears
4. press volume down + power again and hold
This doesn't work. It does nothing but to enable some weird "safe mode" which breaks everything when the phone boots.
Hold vol down and power, release power while continuing to hold vol down then hold power again while still holding vol down.
Sent from my LG-H870 using Tapatalk
Erm... this brings up a menu asking me to restore to factory (delete all user data)? yes. no. and when I press no, it just boots normally again. How to enter recovery to wipe just the cache partition?
First thing I totally find funny is, that everywhere people say "hold down volume down and power and then let both go and press both again" which is obviously wrong. You have to just let power go, like you said.
Then this menu actually should appear, right : https://i.imgur.com/YDVhaLk.png
But it just shows this: https://i.imgur.com/G0E6xGO.png
Yes it does, but if you have TWRP properly instalked hitting yes twice will boot into TWRP.
Sent from my LG-H870 using Tapatalk
Please help how to enter into recovery?
hello
i have epad a707g using Android 4.0
my kid lock it with pattern and he forgot the pattern
i want to reset the tablet
i tried a lot of videos methods to enter to recovery mode like : vol (-) or vol (+) with power button
but recovery mode isn't enter
i tried to reset or unlock the tablet through laptop with AndroidmultiTool and another similar softwares
but the problem is the USB Debugging mode isn't enabled
any suggestion plz
i
Hi , it should work with Vol + and power buttons , maybe you didn't do it correctly or for you is another way .
You can try this :
1. Make sure your device is off
2. Now press together Vol + and Power button at the same time , it will vibrate but don't release keys , once logo appear release both keys and fast press just Vol - button several times until you see recovery menu if that doesn't worl try the same think but with VOl - button , and second key is now VOl + to press several times.
Teddy Lo said:
Hi , it should work with Vol + and power buttons , maybe you didn't do it correctly or for you is another way .
You can try this :
1. Make sure your device is off
2. Now press together Vol + and Power button at the same time , it will vibrate but don't release keys , once logo appear release both keys and fast press just Vol - button several times until you see recovery menu if that doesn't worl try the same think but with VOl - button , and second key is now VOl + to press several times.
Click to expand...
Click to collapse
not working with me
I don't know try to hold long Vol + and power buton just hold like that and one you see logo release just power key, if that doesn't work probably your buttons is not working properly.