I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please make sure you read and understand everything written in the post before flashing it! YOU are choosing to make these modifications and must be sure of what it does
This is a original Chinese ROM 2.0.7.5 for the Huami AmazFit sport watch 2 and the AmazFit Stratos with all features and OTA enabled.
An Italian guide is available on my site: http://nicolasagliano.com/stratos-flash-versione-cinese-2-0-7-5/
Installation
Make sure you have working adb and fastboot on your PC and have the bootloader unlocked on the watch, for the AmazFit Stratos you need to unlock the bootloader on the site: https://unlockamazfit.com/index.php
Download the zip file to your PC and unzip the content
Windows: double click the file “flash.bat”
If you haven't already connect the watch to the PC, do it now and press enter
As soon as you see a white triangle on the clock press enter again, from this moment the procedure starts and you shouldn't disconnect the watch, you just have to wait for the end of the flash!
The installation takes about 8-10 minutes, during the whole procedure the watch stays with the white triangle screen, when it has finished the watch it will reboot itself and you will have installed version 2.0.7.5!
Downloads
Origina Chinese ROM 2.0.7.5: https://mega.nz/#!CdpyzJTT!HTD4PvjKtx0HkdD4UJLcEVeCr5BuxyVrYzvjyvsX4yI
Thanks Nicola for this.
Is the process valid also to flsh the new chinese ROM 2.0.8.0 ?
Miken25 said:
Thanks Nicola for this.
Is the process valid also to flsh the new chinese ROM 2.0.8.0 ?
Click to expand...
Click to collapse
yes, you can flash the 2.0.7.5 and after update to the last Chinese ROM
Cracklydisc said:
yes, you can flash the 2.0.7.5 and after update to the last Chinese ROM
Click to expand...
Click to collapse
Hi Nicola,
Do you know if GPS recording interval of the amazfit sttratos is? )1 second, 5 second,..etc) It is possible to change via watch or app the GPS recording interval?
Does not working for me. It will end with watch reboot and after this i have still StratOS 1.0 installed. Do you have a working solution to get back to original chinese condition.
tripp said:
Does not working for me. It will end with watch reboot and after this i have still StratOS 1.0 installed. Do you have a working solution to get back to original chinese condition.
Click to expand...
Click to collapse
I am having the same issue with this. I have re-flashed StratOS to see if that would make a difference, but it did not. I would like to know if there is a work-around.
Does not working for me
@Cracklydisc There is an error in the flash.bat file.The line "adb shell ls /data/media/0/flash_rom.sh" should be "adb shell sh /data/media/0/flash_rom.sh"
grigoris_a said:
@Cracklydisc There is an error in the flash.bat file.The line "adb shell ls /data/media/0/flash_rom.sh" should be "adb shell sh /data/media/0/flash_rom.sh"
Click to expand...
Click to collapse
i have upload the fixed version! thanks so much!
Thanks
thank you!
Still stuck at loading apps
hello i originally have the CN version then tried to swap to eng version but it didnt work ( the touch screen stopped working so i tried to swap back to the original CN firmware follwoing this guide, but it is now still stuck at the loading apps screen)
I have the amazfit 2 CN version.
Have tried a few times and everything seems to run through smoothly.
Except that after the devices reboots (after the flashing) it doesnt load past the loading apps screen.
If anyone has any suggestions that would be awesome
thanks
hi there
i was able to flash to english rom 2.7.2.8 but now im flashing back to chinese version, it flashed but still running in english, i need to get this flashed to chinese. is this one not allowed to flash lower version to 2.0.7.5?
can anyone share a higher version to me?
stratos Help!
richboy324 said:
hi there
i was able to flash to english rom 2.7.2.8 but now im flashing back to chinese version, it flashed but still running in english, i need to get this flashed to chinese. is this one not allowed to flash lower version to 2.0.7.5?
can anyone share a higher version to me?
Click to expand...
Click to collapse
come faccio a tornare alla versione originale inglese?
mi si bolcca sulla schermata delle impostazioni del polso e non posso continuare..
non riesco piu a utilizzarlo
Hey guys. this rooms is stable? the problems of the euro version been solved? Hr and the consumption of the battery with the blue connected with the cardio band?
Can someone help? I was on StratOS 2.0 and want to revert back to Stock rom but after click Flash.bat now I'm stuck at "downloading boot.img"
watermelon17 said:
Can someone help? I was on StratOS 2.0 and want to revert back to Stock rom but after click Flash.bat now I'm stuck at "downloading boot.img"
Click to expand...
Click to collapse
Search for (Google): "Instalador Firmware Stock Chino Oficial Amazfit 2/Stratos con Actualizaciones OTA (01/08/2018)" by @Saratoga79
Guto ViP said:
Search for (Google): "Instalador Firmware Stock Chino Oficial Amazfit 2/Stratos con Actualizaciones OTA (01/08/2018)" by @Saratoga79
Click to expand...
Click to collapse
Thank you i will try this :fingers-crossed::fingers-crossed::fingers-crossed:
---------- Post added at 03:20 PM ---------- Previous post was at 03:13 PM ----------
Guto ViP said:
Search for (Google): "Instalador Firmware Stock Chino Oficial Amazfit 2/Stratos con Actualizaciones OTA (01/08/2018)" by @Saratoga79
Click to expand...
Click to collapse
I tried to flash that and i got pass the downloading boot.img but then at copying file section it said adb error no devices/emulator found
At the changing language to chinese it said failed to stard daemon and no devices emulator found again. Please help
---------- Post added at 03:31 PM ---------- Previous post was at 03:20 PM ----------
Guto ViP said:
Search for (Google): "Instalador Firmware Stock Chino Oficial Amazfit 2/Stratos con Actualizaciones OTA (01/08/2018)" by @Saratoga79
Click to expand...
Click to collapse
Hey I figured it out. I think there is something wrong with my pc adb driver. I changed to my laptop and the installation is working fine. Yesterday when i tried to flash rom with my pc there is also error in the process
I can buy bricked Stratos. Bricked meaning that it's stuck on teh A logo. It's bricked coz previous user tried to flash Polish language.
Does ot mean it's bootloader is unlocked? Or could he flash the language without unlocking it?
It's chinese Stratos, so this rom would be right one for it.
If it is hnlocked than fine, but if not, than can I unlock bootloader even with bricked watch? Is there a chance ADB will work when stuck at bootlogo?
adb: error: failed to copy 'boot.img' to '/data/media/0/
i have this error. what problem?
Related
Q&A for [GB] Advanced Xperia X10i ROM /FINAL/ [15.06.13]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [GB] Advanced Xperia X10i ROM /FINAL/ [15.06.13]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
get into xrecovery problem!
Hi, I have a serious problem. Due to WIFI ERROR problem, I decide flash this rom again. I flashed AX_x10i_part_1.zip, AX_x10i_part_2.zip and all updates in one time. Now my phone wont boot up neither wont get into Xrecovery. How Can I do to restoure my phone, Please help!!!!!
Yuxing said:
Hi, I have a serious problem. Due to WIFI ERROR problem, I decide flash this rom again. I flashed AX_x10i_part_1.zip, AX_x10i_part_2.zip and all updates in one time. Now my phone wont boot up neither wont get into Xrecovery. How Can I do to restoure my phone, Please help!!!!!
Click to expand...
Click to collapse
Hi, this is a bug that appears only to a few phones, really rear. Make sure that you bootloader is unlocked before you do anything else. From here on there are two options: either preinstall the phone or flash new firmware (ftf). This will fix your phone. The only thing that you need to do after is to flash doomkernel that will give you recovery. If you still want to flash my rom you need to install wifi modules as the kernel has some problems with it. So the installation will look like this - flash part 1 then 2, the other fixes and finally flash the wifi modules. Peace
Denie46 said:
Hi, this is a bug that appears only to a few phones, really rear. Make sure that you bootloader is unlocked before you do anything else. From here on there are two options: either preinstall the phone or flash new firmware (ftf). This will fix your phone. The only thing that you need to do after is to flash doomkernel that will give you recovery. If you still want to flash my rom you need to install wifi modules as the kernel has some problems with it. So the installation will look like this - flash part 1 then 2, the other fixes and finally flash the wifi modules. Peace
Click to expand...
Click to collapse
Thanks for your replying Denie, My phone was unlocked, and it had feralab rom (I dont remember what name exactly was). Due to feralab was very slow so I decided to change ROM.
I installed xrecovery according to the right procedure, and followed the step that you mentioned in the beginning of this post to install advance xperia x10i rom, and it worked for me. I very liked this rom because it´s what I looking for, except the WIFI bug. Then I tryed to flash again but I forgot to do the first boot after flashing the first .zip. Finally, I couldnt bootup neither get into xrecovery again.
Can you send me some recovering procedure and link to download the new firmware? also please indicates the link to download the stable version of doomkernel.
Appreciated very much your help, thank you!
Tethering is not working
Yuxing said:
Thanks for your replying Denie, My phone was unlocked, and it had feralab rom (I dont remember what name exactly was). Due to feralab was very slow so I decided to change ROM.
I installed xrecovery according to the right procedure, and followed the step that you mentioned in the beginning of this post to install advance xperia x10i rom, and it worked for me. I very liked this rom because it´s what I looking for, except the WIFI bug. Then I tryed to flash again but I forgot to do the first boot after flashing the first .zip. Finally, I couldnt bootup neither get into xrecovery again.
Can you send me some recovering procedure and link to download the new firmware? also please indicates the link to download the stable version of doomkernel.
Appreciated very much your help, thank you!
Click to expand...
Click to collapse
I see, so here is what you have to do:
1. make sure you have flashtool as you're going to need it
2. download the two attached files, one is the kernel itself ( it is .ftf just unrar it) which you have to flash using flashtool, the other is to be flashed using xrecovery (wifi modules)
3. download the firmware from the link : http://www.mediafire.com/download/v...3.0.1.G.0.75_GLOBAL-GGL_GENERIC_1232-9897.rar it is a rar file, just pull the ftf file out from it.
4. start flashtool and flash the firmware, as you should know everyhing from your phone will be deleted
5. after the firmware is flashed, flash the kernel (the ftf file) the absolutely same way the firmware is flashed
6. start the phone, when you see the blue light on the phone start pressing the back button in order to get into xrecovery, from there flash the wifi modules and you're done. You'll have a stock rom with fully customized kernel so you can start from the beggining and flash any rom you wish.
NOTICE: the two attached files are property of DoomLord, thank him if you like the kernel
As for the tethering i'm aware that this bug can appear but usually hard reset or preinstalling the rom will clean it out.
Thanks for help!
Denie46 said:
I see, so here is what you have to do:
1. make sure you have flashtool as you're going to need it
2. download the two attached files, one is the kernel itself ( it is .ftf just unrar it) which you have to flash using flashtool, the other is to be flashed using xrecovery (wifi modules)
3. download the firmware from the link : it is a rar file, just pull the ftf file out from it.
4. start flashtool and flash the firmware, as you should know everyhing from your phone will be deleted
5. after the firmware is flashed, flash the kernel (the ftf file) the absolutely same way the firmware is flashed
6. start the phone, when you see the blue light on the phone start pressing the back button in order to get into xrecovery, from there flash the wifi modules and you're done. You'll have a stock rom with fully customized kernel so you can start from the beggining and flash any rom you wish.
NOTICE: the two attached files are property of DoomLord, thank him if you like the kernel
As for the tethering i'm aware that this bug can appear but usually hard reset or preinstalling the rom will clean it out.
Click to expand...
Click to collapse
Dear Denie,
Many thanks for your procedure, right now my phone is working at least. However after the step 4, I was trying to flash Doomkernel ftf file with flashtool and I found the following error message:
15/004/2014 15:04:20 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
15/004/2014 15:04:20 - ERROR - Error flashing. Aborted
What is the problem?
Appreciated very much your help thank you!
Yuxing said:
Dear Denie,
Many thanks for your procedure, right now my phone is working at least. However after the step 4, I was trying to flash Doomkernel ftf file with flashtool and I found the following error message:
15/004/2014 15:04:20 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
15/004/2014 15:04:20 - ERROR - Error flashing. Aborted
What is the problem?
Appreciated very much your help thank you!
Click to expand...
Click to collapse
Glad you made progress! Not really sure what actually causes this error, it may be flashtool or the ftf file. This had happened to me several times. Here's what to do:
when you choose the ftf file to flash check the NO FINAL VERIFICATION box, this should do. Keep in mind that this is risky because if you choose to flash ftf file that is not made for your phone, flashtool will not cancel the flashing operation and that will brick your phone. That's why make sure that you flash the right file , other than that this so called fix, is safe to use.
You better download the kernel from attachment again, sometimes files mess up when downloadin, no idea why. Be sure to notify me for any progress you do so that i can help.
Denie46 said:
Glad you made progress! Not really sure what actually causes this error, it may be flashtool or the ftf file. This had happened to me several times. Here's what to do:
when you choose the ftf file to flash check the NO FINAL VERIFICATION box, this should do. Keep in mind that this is risky because if you choose to flash ftf file that is not made for your phone, flashtool will not cancel the flashing operation and that will brick your phone. That's why make sure that you flash the right file , other than that this so called fix, is safe to use.
You better download the kernel from attachment again, sometimes files mess up when downloadin, no idea why. Be sure to notify me for any progress you do so that i can help.
Click to expand...
Click to collapse
Thanks for your soon replying!
I downloaded .ftf more than 2 time, but still no luck... Is it possible that I flash the kernel in recovery mode?
I checked my actual android kernel version: 2.6.29-00054-g5f01537 [email protected] #1.
Thank you again!
Please ,help me!
I installed this rom, but when I install it does not get the wifi.
so I tried to fix the first part I replaced all the files that had the wifi name and files from my old rom that took the wifi and got dressed.
But when I try to install the second part 2 of the wifi to catch.
Could someone help me?
since already, thank you.
Note: Ja tried installing kernel Doomlord alert by FlashTool, but I can not, error appears.
Yuxing said:
Thanks for your soon replying!
I downloaded .ftf more than 2 time, but still no luck... Is it possible that I flash the kernel in recovery mode?
I checked my actual android kernel version: 2.6.29-00054-g5f01537 [email protected] #1.
Thank you again!
Click to expand...
Click to collapse
Then the only way you can flash it is to check no final verification on flashtool, this should do, check the attached screenshot if you don't understand what to do.
hitireyes said:
I installed this rom, but when I install it does not get the wifi.
so I tried to fix the first part I replaced all the files that had the wifi name and files from my old rom that took the wifi and got dressed.
But when I try to install the second part 2 of the wifi to catch.
Could someone help me?
since already, thank you.
Note: Ja tried installing kernel Doomlord alert by FlashTool, but I can not, error appears.
Click to expand...
Click to collapse
You need the wifi modules for Doomlord's kernel in order for the wifi to work. check this post and download the attached files, only the attached files. Flash the kernel via flashtool, flash the modules via xrecovery. http://forum.xda-developers.com/showpost.php?p=56549160&postcount=6
I did not see the post above, but the problem and the same as mine.
That does not happen because the kernel version is not the X10i?
Error: h t t p : / / tinypic.com/r/2vsln2t/8
You could not upload the modules to your wifi?
Because no module that I downloaded works.
or could tell me what are the files of parte2 that interfere with wifi, so I delete.
Thank you in advance!
Denie46 said:
Then the only way you can flash it is to check no final verification on flashtool, this should do, check the attached screenshot if you don't understand what to do.
You need the wifi modules for Doomlord's kernel in order for the wifi to work. check this post and download the attached files, only the attached files. Flash the kernel via flashtool, flash the modules via xrecovery. http://forum.xda-developers.com/showpost.php?p=56549160&postcount=6
Click to expand...
Click to collapse
Dear Denie,
I tryed to activate the option you show me last time, however, still no luck... the error mesage still there. Any ideal?
thank you!
Yuxing said:
Dear Denie,
I tryed to activate the option you show me last time, however, still no luck... the error mesage still there. Any ideal?
thank you!
Click to expand...
Click to collapse
This is strange, i'll flash these files myself, another thing that comes to my mind is to look for a new version of flashtool or at least different version. Will write back as soon as i test the files.
Greetings!
Hi Denie46:
I have in my E10i , the ROM Android 4.1.2 JB Mini Project , which recently installed. The situation is behaving very slow sometimes and data use for navigation or some messaging by WHATTSAP not work.
I have decided to change ROM , and looking , I liked developed by you. I would like to know:
Is your ROM working yet ?
Data usage, is working?
Errors that are discussed in this post have been corrected ?
Can you provide me the link to download the appropriate kernel?
Can you tell me which files (.zip ) to install and in what order are they?
In advance , thank you for your attention.
Carlos RD
*********************************
Hola Denie46:
Tengo en mi E10i una ROM con Android 4.1.2 JB Mini Project, que instale recientemente. La situación es que se comporta en ocasiones muy lento y el uso de datos para navegar o mensajear por WHATTSAP no funciona.
Tengo decidido cambiar de ROM, y buscando, me ha gustado la desarrollada por Usted. Me gustaría saber lo siguiente:
Aún está vigente?
Funciona el uso de datos?
Los errores que se comentan en este post, han sido corregidos?
Me puede proporcionar el vínculo para descargar el kernel más adecuado?
Me puede decir cuáles son los archivos (.zip) a instalar y en qué orden?
De antemano, mil gracias por su atención.
Carlos RD.
salut wifi ne marche pas !!!!
salut wifi ne marche pas !!!!
good job
[GB] Advanced Xperia X10i ROM /FINAL/ [15.06.13]
Dear Denie
I have installed Part 1, part 2, n2-v3, last udate & second last update; All is working very fine but wifi is not working.
Then i installed wifi module "x10_gb_DooMKernel-v06-1113_wifi.zip "
but still wifi is showing "Error"
Plz help.
thanks in advance...
Dude, got a bug. Wi fi ain't turning on . Display an error
Hello, i tried to install the newest Miui via twrp, but there was an error (i think something with missing m5 sum) and i took off the battery. I tried to boot it but there was a Bootloop which ended by going into the recovery. Ok then i wiped all data but still the same problem. Then i tried to unbrick this phone with this tutorial on needrom with SP Flash tools . It was sucessful and i put the battery back in and tried to boot. But nothing happens. No light no logo no fastboot no recovery. I tried to charge it but there is not even a light. Everythong is black. What should i do now, i need your help
which rom did you try on needrom ? Cinafoniaci Rom ?
may try this: h t t p ://en.miui.com/thread-183558-1-1.html , and here you find the roms: h t t p ://en.miui.com/a-234.html
and no need to remove the battery for flashing
If you flash an incorrect fastboot image to your phone, I think no way to fix it, fastboot is like the BIOS of PC, what flash tools you have used? link?
coremania said:
which rom did you try on needrom ? Cinafoniaci Rom ?
may try this: h t t p ://en.miui.com/thread-183558-1-1.html , and here you find the roms: h t t p ://en.miui.com/a-234.html
and no need to remove the battery for flashing
Click to expand...
Click to collapse
It was this unbrick tool : needrom.com/download/xiaomi-redmi-note-2-unbricking-tool/ .
Omg after trying so much the tutorial you sent me worked!!! I love you so much Thanks!!
thats good, enjoy your rmn2
coremania said:
which rom did you try on needrom ? Cinafoniaci Rom ?
may try this: h t t p ://en.miui.com/thread-183558-1-1.html , and here you find the roms: h t t p ://en.miui.com/a-234.html
and no need to remove the battery for flashing
Click to expand...
Click to collapse
Help Please.
I have hardbricked Redmi Note 2. After successfully flash using SP Flash Tool (100% with no error and green ticked appear) but phone still wont boot up.
any suggestion will be appreciated.
Thanks in advance.
Can you atleast go to fastboot mode?
notaneng said:
Help Please.
I have hardbricked Redmi Note 2. After successfully flash using SP Flash Tool (100% with no error and green ticked appear) but phone still wont boot up.
any suggestion will be appreciated.
Thanks in advance.
Click to expand...
Click to collapse
Sry, I don't have this device anymore, but if you flashed 100%
successful, you should try to flash another rom again, may an older or newer stock stable one. Are you able to enter recovery, you can replace the recovery.img with a working twrp.img, rename to recovery.img and flash it with SP tool, so you might be able to flash a custom rom from sdcard.
eskoczech said:
Can you atleast go to fastboot mode?
Click to expand...
Click to collapse
can't boot at all, recovery or fastboot, even the led charging indicator not light up when usb plug-in.
Is it hardware damage?
btw, thanks for your response..
---------- Post added at 02:31 PM ---------- Previous post was at 02:17 PM ----------
coremania said:
Sry, I don't have this device anymore, but if you flashed 100%
successful, you should try to flash another rom again, may an older or newer stable one.
Click to expand...
Click to collapse
Actually I just flashed one rom, latest one from official site.
I will try older version.
Thanks
notaneng said:
can't boot at all, recovery or fastboot, even the led charging indicator not light up when usb plug-in.
Is it hardware damage?
btw, thanks for your response..
---------- Post added at 02:31 PM ---------- Previous post was at 02:17 PM ----------
Actually I just flashed one rom, latest one from official site.
I will try older version.
Thanks
Click to expand...
Click to collapse
Are you sure you flashed the right rom for your device.
If everything fails, look if the cinafonicia rom is still on Needrom you can try to flash it, it fixed my device once if I remember correctly.
coremania said:
Are you sure you flashed the right rom for your device
Click to expand...
Click to collapse
Fastboot rom for xiaomi redmi note 2 got it from
h t t p ://update.miui.com/updates/v1/fullromdownload.php?d=hermes_global&b=F&r=global&n=
am i right?
notaneng said:
Fastboot rom for xiaomi redmi note 2 got it from
h t t p ://update.miui.com/updates/v1/fullromdownload.php?d=hermes_global&b=F&r=global&n=
am i right?
Click to expand...
Click to collapse
Yes, think so.
Otherwise try Needrom.
coremania said:
Yes, think so.
Otherwise try Needrom.
Click to expand...
Click to collapse
after a week trying a lot, different roms different SP Flash Tools, different method (download only, firmware upgrade, even format), also rom from needrom, give me same result. Flash success but phone not boot up.
I thing it is hardware issue, might be the emmc.
I thing I have to give up, emmc replacement cost almost $50 in my country.
Thanks for all your responses.
notaneng said:
after a week trying a lot, different roms different SP Flash Tools, different method (download only, firmware upgrade, even format), also rom from needrom, give me same result. Flash success but phone not boot up.
I thing it is hardware issue, might be the emmc.
I thing I have to give up, emmc replacement cost almost $50 in my country.
Thanks for all your responses.
Click to expand...
Click to collapse
Sry to hear, good luck
Dear Dispiteous
if your device hardbricked by just the flash.. so your device didn't dead..
You 're need to use BOX-setup that available in Technician stores to recover your partitions by hardware(That 's 18 partitions)
and your cell will be fine
Regards
coremania said:
Are you sure you flashed the right rom for your device.
If everything fails, look if the cinafonicia rom is still on Needrom you can try to flash it, it fixed my device once if I remember correctly.
Click to expand...
Click to collapse
:good:
Hi every one ,
It has been a long time that I am trying to repair my htc desire 825 which blocked at startup on htc.
And I ended up solving the problem with a backup that I made on another htc 825.
So if you have the same problem the solution is here :
0) unlock bootloder
1)Download the twrp and install it.
2)Download the backup htc file 825 and uncompress the twrp folder
3)Turn off your phone
4)Plug it into the computer
5)It will conectct in data storage mode
6)Copy the twrp folder to the phone
7)Unplug the phone and restart it in recovery mode
8)Go to restore and choose the copied folder for restoring
9)Restart the phone and it will work
If this not work flash the RUU file and to do this you have to relock the bootloader
then reunlock if and flash the twrp
And I also put the RUU but I have not try it yet
I leave you with the download :
Download from Here
I will post an video on youtube for those who was not able to solve this problem
Do not hesitate to post your questions
Please please, do a tutorial how to do it. Tell we where you found 825s backup?
I already have a twrp installed, I need to install kernel I think and system
Daumian said:
Please please, do a tutorial how to do it. Tell we where you found 825s backup?
I already have a twrp installed, I need to install kernel I think and system
Click to expand...
Click to collapse
Hello i have made a wipe cache and i delete my system wrongly
So i have made a backup from my secound htc desire 825 and i copied it to my desire 825 and Finley i restored it!
I cant flash the boot from any of the linked packages beacuse htc has this stupid lock - s-on and s-off. I had s-on and i locked bootloader. Now i cant unlock beacuse I need to check one box in system settings. The problem is - i cant access system. I am stuck now : (
P.S And the hostings are horrible...
Also half of ruu zip is corrupted
Daumian said:
I cant flash the boot from any of the linked packages beacuse htc has this stupid lock - s-on and s-off. I had s-on and i locked bootloader. Now i cant unlock beacuse I need to check one box in system settings. The problem is - i cant access system. I am stuck now : (
P.S And the hostings are horrible...
Also half of ruu zip is corrupted
Click to expand...
Click to collapse
Hello,
Firsti wana know if your htc desire is tuck on Wite Htc logo
if yes ,
You have to copy the file backup to your device but in your case i think that you can't so you have to reunlock the bootloader and flach the twrp zip and you will be able to copy it
Than you go to restore and choosr the copied file and install it
I'm very busy at the moment but i'll make a videoo on youtube tomorrow
Ps : sorry for the hosting i'll upload all files on mediafire soon
I hope that can help you and if this not work for you please make a feedback
Sorry for my English
Thanks Bro <3
Any progress on the video?
---------- Post added at 07:25 PM ---------- Previous post was at 07:19 PM ----------
@interfeatboy Are those files latest? I mean when was the 825 last updated? I didn't received any update since last year. Can you share you about phone screenshots? I am just curious. ?
Suyashbansal said:
Any progress on the video?
---------- Post added at 07:25 PM ---------- Previous post was at 07:19 PM ----------
@interfeatboy Are those files latest? I mean when was the 825 last updated? I didn't received any update since last year. Can you share you about phone screenshots? I am just curious.
Click to expand...
Click to collapse
hello bro ! this is not the new version !! this is juste a solusion for peoples who have deleted there systems files by mistake ( trhis is what happened to me)
PS: i found this files in a Chinese forum
interfeatboy said:
hello bro ! this is not the new version !! this is juste a solusion for peoples who have deleted there systems files by mistake ( trhis is what happened to me)
PS: i found this files in a Chinese forum
Click to expand...
Click to collapse
Will I get future updates (if there ever will be any) if I used these files?
Ps : sorry for the hosting i'll upload all files on mediafire soon
Click to expand...
Click to collapse
@interfeatboy When can you update the hosting? The current one is blocked in India. And it's very bad.
Suyashbansal said:
Will I get future updates (if there ever will be any) if I used these files?
Click to expand...
Click to collapse
yes of course this is like a stock rom
Suyashbansal said:
Will I get future updates (if there ever will be any) if I used these files?
Click to expand...
Click to collapse
well i put the files on my google drive
you can find if from Here
interfeatboy said:
well i put the files on my google drive
you can find if from Here
Click to expand...
Click to collapse
Thanks for the Drive link!
you are welcome
People who wanna me put a video just click Thank's, if there is more 5 persone i'll upload it
:cyclops:
I have a problem - when i power off the phone and then connect it to charger, the phone displays the battery sign, but soon after boots to TWRP by itself and what's more - the screen is unresponsive, so i have to shut the phone down by pressing Power+Vol-+Vol+, which is pretty annoying, has anyone came across such behaviour and managed to fix it?
Ok, i've managed to find it This is the stock recovery IMG, working fine, extracted from original firmware.
https://mega.nz/#!yYd30a7A!hK7RoQjhWkG8S2nS3__B8xbnwAssN4QI59rXJyQ1y9o
Credits go to nkk71 https://forum.xda-developers.com/member.php?u=2605798 for the great tool to exctract the firmware image,
without it i wouldn't accomplish the task.
If the link will die, PM me, i'll reupload.
silver2004 said:
Ok, i've managed to find it This is the stock recovery IMG, working fine, extracted from original firmware.
https://mega.nz/#!yYd30a7A!hK7RoQjhWkG8S2nS3__B8xbnwAssN4QI59rXJyQ1y9o
Credits go to nkk71 https://forum.xda-developers.com/member.php?u=2605798 for the great tool to exctract the firmware image,
without it i wouldn't accomplish the task.
If the link will die, PM me, i'll reupload.
Click to expand...
Click to collapse
I did this and my phone is f.. up. Thank you so much!
Hi all,
perhaps I am just getting to old - but I cannot seem to find the simple guide on how to root stock, international ROM. I have 2.3.2.7
Please note I am NOT asking how to flash the modded rom, but instead - how to root the newer Amazfit stock rom.
Many thanks in advance!!
Unlock bootloader, go to fastboot mode, boot using a modified boot.img with temporary (adb) root.
If you find a way to root Android 5.1 on a MIPS device, please tell me...
Hi thanks for the effort - I missed to mention I already tried that before posting.
Issue is that after flashing boot.img, watch loses adb connection and I cant proceed.
Reboot helps but temp boot image is no longer there, and then process gets back fo start.
Any help?
phnikola said:
Hi thanks for the effort - I missed to mention I already tried that before posting.
Issue is that after flashing boot.img, watch loses adb connection and I cant proceed.
Reboot helps but temp boot image is no longer there, and then process gets back fo start.
Any help?
Click to expand...
Click to collapse
Don't flash the modified boot.img, use it to get temporary root access in adb:
Code:
fastboot boot boot_with_root_adb.img
Keep the original boot.img that came with the ROM/firmware intact, so if you run into any problem a simple reboot should fix it.
Once you have a temp adb root privilege by doing like lfom mentioned, then follow this https://forum.xda-developers.com/smartwatch/amazfit/local-root-amazfit-watch-supersu-2-79-t3711327
anox said:
Once you have a temp adb root privilege by doing like lfom mentioned, then follow this https://forum.xda-developers.com/smartwatch/amazfit/local-root-amazfit-watch-supersu-2-79-t3711327
Click to expand...
Click to collapse
This only works with Pacefied IIRIC (or any other custom ROM that adds support to init.d), isn't it?
lfom said:
This only works with Pacefied IIRIC (or any other custom ROM that adds support to init.d), isn't it?
Click to expand...
Click to collapse
Works fine on my English stock rom.
There are some small mistakes in one of the sh scripts. I forgot exactly what I modified, but I can attach my modified script when I get home tonight.
Edit: Modified script attached
Just replace the original script with the attached one. All credits go to the original poster. I just modified his script a bit to root my rom.
My pace is currently on rooted stock 1.3.8a rom. As long as you can get root privileges from the temp kernel, I don't see why it wouldn't work on any other rom. It should also work on Stratos. I don't know for sure as I don't have one to try.
Thanks for all the help.
Happy again. Using Assayyed ROM kitchen and Saratoga's official 2.3.2.7 ROM thread I was able to mod the official rom and flash it back to device.
Kudos to all
anox said:
Works fine on my English stock rom.
There are some small mistakes in one of the sh scripts. I forgot exactly what I modified, but I can attach my modified script when I get home tonight.
Edit: Modified script attached
Just replace the original script with the attached one. All credits go to the original poster. I just modified his script a bit to root my rom.
My pace is currently on rooted stock 1.3.8a rom. As long as you can get root privileges from the temp kernel, I don't see why it wouldn't work on any other rom. It should also work on Stratos. I don't know for sure as I don't have one to try.
Click to expand...
Click to collapse
thank you very much, finally I can have a stock rooted ROM that supports browsers (the Pacefield and stockfield do not work for me, I guess it is something related with the webview service)
carloscolhao said:
thank you very much, finally I can have a stock rooted ROM that supports browsers (the Pacefield and stockfield do not work for me, I guess it is something related with the webview service)
Click to expand...
Click to collapse
I still cant figure out how to root my device. I am running 2.8.1.0 stock English ROM by Saratoga79 in my PACE.
Can you give me a little guidance. Things are going over my head...
iTalisman said:
I still cant figure out how to root my device. I am running 2.8.1.0 stock English ROM by Saratoga79 in my PACE.
Can you give me a little guidance. Things are going over my head...
Click to expand...
Click to collapse
Get temporary root with a modified boot.img that works with your watch, then run the shell script Anox attached in his post, that's what the previous posts say.
iTalisman said:
I still cant figure out how to root my device. I am running 2.8.1.0 stock English ROM by Saratoga79 in my PACE.
Can you give me a little guidance. Things are going over my head...
Click to expand...
Click to collapse
As far as I know there are two kinds of root.
1- if you want to install something through adb usb that requires root you can make a temporary root, see for instance post 2 from this thread https://forum.xda-developers.com/smartwatch/amazfit/rom-amazerom-pace-v1-0-20180618-t3805928
2- if you need root to use some app (e.g. to modify the DPI in the watch using the app "screen shift" version 1.0.0) you can flash the superSu using the script provided by anox in post 7 of this thread, for that you may need to make the temporary root first
you can then verify if you are rooted using for instance some of those apps in playstore.
by the way, browsers now work with the last version of Pacefield, so I prefer pacefield (that is already rooted and permanent) than the stock rom
carloscolhao said:
As far as I know there are two kinds of root.
1- if you want to install something through adb usb that requires root you can make a temporary root, see for instance post 2 from this thread https://forum.xda-developers.com/smartwatch/amazfit/rom-amazerom-pace-v1-0-20180618-t3805928
2- if you need root to use some app (e.g. to modify the DPI in the watch using the app "screen shift" version 1.0.0) you can flash the superSu using the script provided by anox in post 7 of this thread, for that you may need to make the temporary root first
you can then verify if you are rooted using for instance some of those apps in playstore.
by the way, browsers now work with the last version of Pacefield, so I prefer pacefield (that is already rooted and permanent) than the stock rom
Click to expand...
Click to collapse
hi there, currently im having a Amazfit Stratos 2 on International stock rom 2.3.8.0, unlocked bootloader with TWRP recovery and I still having hard time to figure out how to perma-root my watch.
it seems that i can't flash the script provided by anox in post 7.
illkid69 said:
hi there, currently im having a Amazfit Stratos 2 on International stock rom 2.3.8.0, unlocked bootloader with TWRP recovery and I still having hard time to figure out how to perma-root my watch.
it seems that i can't flash the script provided by anox in post 7.
Click to expand...
Click to collapse
I think you need first do a temporary root in order to run the anox script. Perhaps, in your case you can flash the supersu zip through twrp.
If anything works for you I don't know how to help. Sorry.
carloscolhao said:
I think you need first do a temporary root in order to run the anox script. Perhaps, in your case you can flash the supersu zip through twrp.
If anything works for you I don't know how to help. Sorry.
Click to expand...
Click to collapse
Which version of SuperSU is recommended to use is TWRP?
ronaldheld said:
Which version of SuperSU is recommended to use is TWRP?
Click to expand...
Click to collapse
I don't know, I never flashed the TWRP in my amzfit pace, sorry :/
carloscolhao said:
I don't know, I never flashed the TWRP in my amzfit pace, sorry :/
Click to expand...
Click to collapse
No problem.
carloscolhao said:
I think you need first do a temporary root in order to run the anox script. Perhaps, in your case you can flash the supersu zip through twrp.
If anything works for you I don't know how to help. Sorry.
Click to expand...
Click to collapse
thanks mate, i tried but no avail.
the watch was stucked in bootloop and i have to reflash the firmware again.
hmm did you install any custom ROM to your watch?
---------- Post added at 05:22 PM ---------- Previous post was at 05:18 PM ----------
ronaldheld said:
Which version of SuperSU is recommended to use is TWRP?
Click to expand...
Click to collapse
previously i flashed TWRP that bundled with this tool: https://forum.xda-developers.com/smartwatch/amazfit/tool-tool-one-driversunlocktwrpfactory-t3874802 but somehow i failed to install SuperSu from this topic: https://forum.xda-developers.com/smartwatch/amazfit/local-root-amazfit-watch-supersu-2-79-t3711327
if you have successfully perma-root your watch with stock ROM, please do guide me through.
thank you
illkid69 said:
thanks mate, i tried but no avail.
the watch was stucked in bootloop and i have to reflash the firmware again.
hmm did you install any custom ROM to your watch?
---------- Post added at 05:22 PM ---------- Previous post was at 05:18 PM ----------
at the time I flashed the superSU I had a stock ROM installed (found here in the forum, I don't remember which one). Then I made a temporary root (the img was found here in the forum too). Finally I use this temporary root to flash the superSU zip, I had to use the script provided by Anox here in this thread, instead of the original one.
If you cannot flash superSU, you may want to flash a custom ROM with perm root, I have using this in the last months: https://forum.xda-developers.com/smartwatch/amazfit/paceficator-project-wos-2-6-0-12-rom-v0-t3794922
you can also find other custom roms in the forum, also for stratos.
sorry I cannot help you more
Click to expand...
Click to collapse
Hi all, is it possibile to do a temporary root on Stratos with pace rom, bootloader on, sn null... I have Access to memory od this watch via windows? Thx in advance for any help.
i wrongly installed stratos version on the verge version !
now i have installed the verge version ack but i dont have touch in the watch
what do i need to do how can i fix it?
can i?
where can i get older versions?
mstrolo said:
i wrongly installed stratos version on the verge version !
now i have installed the verge version ack but i dont have touch in the watch
what do i need to do how can i fix it?
can i?
Click to expand...
Click to collapse
You will have to find the original Rom/firmware and flash that back onto the watch...search the internet it has to be somewhere...'.
am trying for the last couple of hours and nothing
can it be hardware?
after installing the wrong firmware can it destroy the hardware?
caz the phone comes up but i dont have any touch just shows me the scan code
and i cant confirm it
Damoedge said:
You will have to find the original Rom/firmware and flash that back onto the watch...search the internet it has to be somewhere...'.
Click to expand...
Click to collapse
if i will install the original firmware you think the rouch will work ?
mstrolo said:
can it be hardware?
after installing the wrong firmware can it destroy the hardware?
caz the phone comes up but i dont have any touch just shows me the scan code
and i cant confirm it
Click to expand...
Click to collapse
Could be... But first calm down. What do you mean by "the phone comes up but i dont have any touch just shows me the scan code
and i cant confirm it"?
You mean watch? If watch is showing the scan code, that's good. Take your phone, delete any amazfit watch under Bluetooth, clear amazfit app data, login again and then try to scan the watch with the app.
Sent from my CMR-W09 using Tapatalk
Zeljko1234 said:
Could be... But first calm down. What do you mean by "the phone comes up but i dont have any touch just shows me the scan code
and i cant confirm it"?
You mean watch? If watch is showing the scan code, that's good. Take your phone, delete any amazfit watch under Bluetooth, clear amazfit app data, login again and then try to scan the watch with the app.
Sent from my CMR-W09 using Tapatalk
Click to expand...
Click to collapse
sorry yea i meant the watch...
the touch is not responding to anything
the watch only responds to commands via adb
this is where i am
mstrolo said:
sorry yea i meant the watch...
the touch is not responding to anything
the watch only responds to commands via adb
Click to expand...
Click to collapse
But it's showing qr code? That's normal behavior. Watch has to be paired first. Please try what I've suggest above.
But first, calm down. Panicking is not helping at all. You can even make it worse ?
Sent from my CMR-W09 using Tapatalk
you see the watch comes up but icant press it touch not working
https://www.youtube.com/watch?v=eXdmOlCyF3U&feature=youtu.be
just like what he is heving on his watch but mine is the verge
Zeljko1234 said:
But it's showing qr code? That's normal behavior. Watch has to be paired first. Please try what I've suggest above.
But first, calm down. Panicking is not helping at all. You can even make it worse
Sent from my CMR-W09 using Tapatalk
Click to expand...
Click to collapse
look at the video
AFAIK Verge INTL firmware only supports one language, so it goes directly to QR code for pairing after it's started up. You may need to do a full wipe of storage before flashing stock Verge firmware for your watch model (I recommend using the same version that was installed originally on your watch: A1801 = CN, A1811 = INTL). If you know how to flash the firmware manually from bootloader, you can erase user data while in fastboot mode:
Code:
fastboot erase data
fastboot erase cache
fastboot erase userdata
if it fails, you may want to also erase system, but after doing this the watch will not boot until you flash a firmware manually, so pay attention to what you do!
Code:
fastboot erase system
After erasing, you can flash the firmware by booting the modified recovery partition with root access, then proceed with manual firmware installation:
Code:
fastboot boot modified_recovery.img
i enterd the twrp and touch is working so its just a software thing
have any idea what i need to do?
lfom said:
AFAIK Verge INTL firmware only supports one language, so it goes directly to QR code for pairing after it's started up. You may need to do a full wipe of storage before flashing stock Verge firmware for your watch model (I recommend using the same version that was installed originally on your watch: A1801 = CN, A1811 = INTL). If you know how to flash the firmware manually from bootloader, you can erase user data while in fastboot mode:
Code:
fastboot erase data
fastboot erase cache
fastboot erase userdata
if it fails, you may want to also erase system, but after doing this the watch will not boot until you flash a firmware manually, so pay attention to what you do!
Code:
fastboot erase system
After erasing, you can flash the firmware by booting the modified recovery partition with root access, then proceed with manual firmware installation:
Code:
fastboot boot modified_recovery.img
Click to expand...
Click to collapse
the touch is working on twrp
so its just a software issue
but i need to fix it some how
mstrolo said:
look at the video
Click to expand...
Click to collapse
It was the same when stitching the recovery from Stratos for firmware 3.2.0.5. The twrp recovery firmware helped. The sensor earned, after I flashed the original Chinese firmware 3.0.12.0 and the recovery was replaced with the stock one. Everything is working
yea i flashed the new twrp and the touch is working
thanks for the help
i can breath hhh
mstrolo said:
yea i flashed the new twrp and the touch is working
thanks for the help
i can breath hhh
Click to expand...
Click to collapse
If you do not reflash twrp to stock recovery, then OTA updates will not work for you
Now I see.
So, you flashed Stratos ROM on your Verge.
Can you check your bootloader status? I guess it's unlocked if you booted TWRP. What ROM do you have installed now in the watch? Do you still have the Serial Number?