Xiaomi Redmi Note 4 bricked - Xiaomi Redmi Note 4 Questions & Answers

Hello Everyone, this is my first post on the forum, and I'm quite new, so forgive me if I'm posting on the wrong place, just trying to get some answers.
I bought my Xiaomi around May 2017, and I've been having problems with it. For months, whenever I was watching a video on Facebook (Yes, only happened on Facebook, weird), it would crash and I had to shut it down continually clicking on the shut down button.
But now it just broke. After trying to restart it, it got stuck on bootloop, and just keeps restarting over and over with the MI Logo. I had TWRP installed and I can't boot it. I can only boot to fastboot, and I tried to install the firmware from scratch using Mi_flash_tool, and it marked "success", however, after restarting, bootloop again.
I tried different recoveries and different firmwares, but nothing works.
I was hoping you would have some kind of solution.
It was running the V9.2.2.0.MBFMIEK firmware.
Thank you in advance,
Yonian

Is there a way to get a boot log without recovery?

Yonian said:
Hello Everyone, this is my first post on the forum, and I'm quite new, so forgive me if I'm posting on the wrong place, just trying to get some answers.
I bought my Xiaomi around May 2017, and I've been having problems with it. For months, whenever I was watching a video on Facebook (Yes, only happened on Facebook, weird), it would crash and I had to shut it down continually clicking on the shut down button.
But now it just broke. After trying to restart it, it got stuck on bootloop, and just keeps restarting over and over with the MI Logo. I had TWRP installed and I can't boot it. I can only boot to fastboot, and I tried to install the firmware from scratch using Mi_flash_tool, and it marked "success", however, after restarting, bootloop again.
I tried different recoveries and different firmwares, but nothing works.
I was hoping you would have some kind of solution.
It was running the V9.2.2.0.MBFMIEK firmware.
Thank you in advance,
Yonian
Click to expand...
Click to collapse
flash latest twrp through fastboot. boot into twrp recovery and download a custom rom + latest firmware and transfer to phone or sdcard. install firmware and custom rom, then reboot. u should be fine

I installed both twrp and stock recovery while trying to figure this out, without solution.
Either I try to boot into recovery, or into system the result is the same, bootloop.
I can only boot to bootloader.
Thank you

Related

Stuck in Chinese TWRP Bootloop! Please help, panicking badly.

Hey guys!
So I followed the tutorial on rooting, The Honor 7 from this forum, at first it all went fine then upon installing SuperSU and restarting I got caught in a bootloop.
It now will only boot up to TWRP, and I cannot understand a thing it says as i'm in Chinese.
I've tried putting it into fastboot but the ADB thing will not recognize the phone to reboot, and i'm starting to think i've broken it
PLEASE HELP!
.. I did get it out of Bootlooping once, and to load up the normal EMUI, then had to reset to update SuperSU as it was an old version and now I cannot get back out of the bootloop again.
Hi,
the only version of SuperSU which is working with Honor7 is 2.62. All others cause bootloop.
Kind regards,
Sebastien.

Lenovo Tab3 (TB3-710I) bricked!

Yesterday, I flashed Tzul's S000031 ROM for the Lenovo Tab3 7 Essential (TB3-710I). It was a successful root, until after I started the tablet again, it only let out a long vibrate, with short vibrate intervals after about 5 seconds.
I first flashed TWRP on the tablet yet I think it did not load, as I started into recovery yet saw the Android Stock Recovery running.
I've been looking at guides, flashing other versions to no avail. SP Flash Tool always shows that it cannot load DRAM (4032 error or 0xFC0 error).
This happened for the first time that I've been flashing and rooting phones. I hope you help me out here.
flagpol said:
Yesterday, I flashed Tzul's S000031 ROM for the Lenovo Tab3 7 Essential (TB3-710I). It was a successful root, until after I started the tablet again, it only let out a long vibrate, with short vibrate intervals after about 5 seconds.
I first flashed TWRP on the tablet yet I think it did not load, as I started into recovery yet saw the Android Stock Recovery running.
I've been looking at guides, flashing other versions to no avail. SP Flash Tool always shows that it cannot load DRAM (4032 error or 0xFC0 error).
This happened for the first time that I've been flashing and rooting phones. I hope you help me out here.
Click to expand...
Click to collapse
Do you find the solution yet? Cause I face the same problem too..
Tzul please help.. :crying:
me too, please help
similar issue, cant power on, keep on vibrate loop interval, no display, not detected by pc
flagpol said:
Yesterday, I flashed Tzul's S000031 ROM for the Lenovo Tab3 7 Essential (TB3-710I). It was a successful root, until after I started the tablet again, it only let out a long vibrate, with short vibrate intervals after about 5 seconds.
I first flashed TWRP on the tablet yet I think it did not load, as I started into recovery yet saw the Android Stock Recovery running.
I've been looking at guides, flashing other versions to no avail. SP Flash Tool always shows that it cannot load DRAM (4032 error or 0xFC0 error).
This happened for the first time that I've been flashing and rooting phones. I hope you help me out here.
Click to expand...
Click to collapse
Hi, did you find anything?
I have three TB3-710l (they are the company I work for), I have successfully root 2 of them but the newest tablet doesn't have the same luck.
First I install TWRP by Tzul, but the TWRP have an error never mount anything.
Second I try to flash stock firmware (Lenovo_Tab_3_TB3-710I_MT6580_S000032_160921) then the same happened, never turn on and just vibrates.
Always using SPFT, and now I have the same problem has you: always shows that it cannot load DRAM (4032 error or 0xFC0 error).
EDIT: Hi, for everyone who get in here with this problem, please read all this thread.
I unbrick my tablet with this answer in specific.
Good Luck!
asdrubalsantander said:
Hi, did you find anything?
I have three TB3-710l (they are the company I work for), I have successfully root 2 of them but the newest tablet doesn't have the same luck.
First I install TWRP by Tzul, but the TWRP have an error never mount anything.
Second I try to flash stock firmware (Lenovo_Tab_3_TB3-710I_MT6580_S000032_160921) then the same happened, never turn on and just vibrates.
Always using SPFT, and now I have the same problem has you: always shows that it cannot load DRAM (4032 error or 0xFC0 error).
EDIT: Hi, for everyone who get in here with this problem, please read all this thread.
I unbrick my tablet with this answer in specific.
Good Luck!
Click to expand...
Click to collapse
THis might WOrk i ve havent tried yet ,tho i wanna flash it now
https://forum.xda-developers.com/android/development/tb3-710i-tb3-710f-rom-stock-rom-lenovo-t3437810
same problem faced,can any developer please help us

Help me with this boot error

So, Im really new in this rooting and stuff, heres the problem that Im having right now, Ive just installed xposed with TWRP for my Huawei G8 (RIO-L03) And after the installation my phone just got stuck in the animation that appears every time that you power on the phone It isnt like a bootloop that keeps rebooting, no, it just stuck there, and I can acces recovery and all, but it wont boot into the OS it self, please help me.
CriticalPact said:
So, Im really new in this rooting and stuff, heres the problem that Im having right now, Ive just installed xposed with TWRP for my Huawei G8 (RIO-L03) And after the installation my phone just got stuck in the animation that appears every time that you power on the phone It isnt like a bootloop that keeps rebooting, no, it just stuck there, and I can acces recovery and all, but it wont boot into the OS it self, please help me.
Click to expand...
Click to collapse
Couple ways here... You can refresh your ROM via flashfire, or a new one.
Or you can run the uninstall zip with xposed which would probably be easier.
You'll have to push it to your phone with a pc

Phone stuck in TWRP bootscreen

Hey guys
I have unlocked and rooted my mate 10 pro a while ago and all went well. After reseting my phone and switching to magisk I had the problem that I had a lot of "weird" folders on my phone while in recovery. Just random letter and number names and i couldnt find anything like when I wanted to install a .zip file. So I decided to do a factory reset out of the booted system to hopefully solve this issue.
But now I am stuck in TWRP bootscreen and cant do anything. I cant turn off the phone and it wont boot anything. Neither recovery nor system. Anybody here with a tip on how I can fix this mess?
Any help is highly appreciated!!
EDIT: FINALLY MANAGED TO GET INTO ERECOVERY MODE!! SO HOPEFULLY THIS THREAD CAN GET CLOSED/DELETED OR WHAT EVER!!

Bootloop after Flashing Custom Rom (ATU-L21) Need Help

Yesterday I tried to Flash LineageOS on my ATU-L21
The installation works fine but as the Phone reboots, it loops.
I waited the whole night, but nothing happens. Its Bootloop seems not to end up.
Does Anybody knows how to Install a custom Rom clearly without a bootloop?
I tried it with ADB and TWRP but nothing worked.
Almost the same issue as yours, im getting stucked on "Your devices cant be trusted" thing after i flash the stock rom. Please send help ((

Categories

Resources