Hello,i got a huawei y6 2017 MYA-L11 model, i unlocked the bootloader and installed twrp, i made a backup of my stock rom and then wiped to install some custom roms.But now my phone is not working, everytime i start the phone it goes only to twrp even when i restore.I see that the backup exist in internal storage (contains system,data and boot) and says the restore was successful but the device boots always in twrp menu.Please help.
Any help guys?It doesnt seem so difficult problem for the level of this forum.
Try resetting the phone by pressing up volume button when on warning screen to get to erecovery. Use the option to shut down phone. Then try starting the phone again after a minute or two.
BTW what rom were you trying to install?
I tried every possible combination in the warning screen the only place i can go is twrp.I tried to install aokp,lineage 14.1, slim7, xeonHD nothing worked.
Where did you get those roms, I don't think they are for the y6 2017!
Anyway try pressing and holding the volume up button when at warning screen until the phone turns off. It will come back on and go to erecovery after the warning screen.
If that doesn't help then get SPFlashtool and stock rom and flash it.
I didnt know that y6 and y6 2017 was different.When i hold volume up the warning screen keeps repeating like forever and the phone doesnt go off.
Do i need spflashtool,can i do it from twrp install?
Anyway thanks for the help,it seems this phone cant take any custom roms,i should had bought a sumsung,can you suggest me some brands/devices that can be easily rooted/twrped with much custom roms in low range price.
We all make mistakes.
You will be able to fix it with the spflashtool if you download the rom.
Just have a look on here for an alternate device, I wouldn't know off hand which would be a good buy.
Tip: Read, read and then read some more before attempting anything with your phone!
Problem, the phone cant stay off when the usb is connected to the pc or electricity,when i press power off it reboots to warning screen and twrp,if it is closed when i plug the usb it starts into twrp all the time.
When i put the scatter file and press download this error appears
ERROR:S_COM_PORT_OPEN_FAIL(1013)
[COM]Failed to open COM port.
I m on linux
Use this tut to set up for linux.
You will just have to time plugging in the usb cable., I managed it so I know it can be done!
Related
After struggling for months, I was finally able to root my Karbonn A27 using Root Master. Soon after rooting, I couldn't resist the urge to install a custom rom.The stock rom was giving me a lot of issues, one of the major problem being the heating issue.
So as a next step, I tried to flash the recovery. I took a chance and flashed the CWMrecovery which was not meant for my device. (The CWM I used was actually meant for Karbonn A21)
As a result of that, I got my phone bricked. (Soft bricked caught on bootloop) Luckily, I am able to put the phone on Fastboot mode though.
To unbrick my phone, I understand that I need to find the stock rom for my device. So that I can re-flash all the images in Fastboot mode. The problem is I am not to find the Stock Rom on the internet. Please let me know if there is any other alternate way to get out of jail.
Notable things:
1) One interested thing, that I would like to share about my phone is that, while booting if I press the "power and up arrow" button together it takes me to weird screen showing hardware information. It does nothing after that, I will have to remove and reinsert the battery to make it boot again.
2) Another thing, after restarting the phone by pressing the power button later if I press the "UP and DOWN" arrow key together. It takes me to another screen which reads "Fastboot" mode displaying options for recovery and factory reset
Please help guyz... I strongly believe xda is the only place in this world that can fix this phone now for me.
:crying: Please help guyz...
HELP...................
Hi all,
I unblocked my honor 7 PLK-L01 okay,
but when i tried to flash the superSU, to get rooted, after reboot, it never wants to reboot.
I tried:
1- I tried like the manual saying, (press volumeUp+volumeDown+power), then after the first image, i release the power and keep up+down presses,
But instead of going to recovery, the phone keep restarting.
2- i tried to press volumeUp+power, then keep pressing on volumeUp, but also the phone keep restarting,
How ever I can go to bootloader mode, if i press voluemDown.
but when i flashed another twrp, nothing change.
Can someone help please, the phone even stuck on the starting, and can't be recognized as mtp on compter,
or can't goto recovery_mode
Thank you in advance
i think you are kinda messed it up..
you should not flash any thing except stock firmware using emui recovery..
only solution: try and flash twrp again and again to check if it installed correctly.. or send a pic of what it says in the command window when you try to flash twrp..
or you can even try to put an update.app under a dload folder of your sd card and try to flash(do it if you have emui recovery..remember try any other firmware.. not the one you alredy tried)
you should always read forums and look into various things you are not sure about before you even download superSU.zip.... you should try install twrp do full wipe and install rom THEN reboot and you should be fine. make sure that rom is made for your device...
Hello community,
I haven't posted here before, so I hope I'm not doing anything wrong.
I have a problem with my Neffos X1 and after browsing the internet for hours nothing helped so far, so I hope some of you can help me out.
My phone is stuck in a bootloop since yesterday evening. I haven't done any updates or new installations recently, so it just happened out of the blue. It loads till the Neffos logo and then restarts over and over again.
Since I can't take the battery out, I tried letting it run out of energy and then restart, but as soon as I connect it to a power source the bootloop will start again.
I read a lot about getting it in recovery mode or to try and flash it, but no matter what combination of buttons I try, nothing is happening. The phone basically doesn't react to anything and just keeps restarting. The only thing I noticed is, that when pushing both volume keys the screen will just stay black (no restarting), but after letting go the bootloop will start again.
I tried flashing it via SP Flash Tools, but the phone also doesn't react to it.
Lots of troubleshooting guides also require, that I have rooted my phone in the past, unfortunatly I haven't. I also read about unlocking the bootloader, but since my phone isn't reacting to any buttons and my laptop also doesn't seem to recognize my phone (probably because it doesn't boot proberly), that doesn't seem like a solution either.
To summarize: I'm stuck in a bootloop with no recovery mode, no rooting, no unlocking bootloader, probably can only use my laptop to do anything remotely.
So, is there anything you can think of, that might help me get out of the bootloop? Or ideas of what I may did wrong when trying the other solutions?
Thanks for any help in advance.
Same problem
I have the same problem, I have tried all kinds of soft reset and nothing is working I also opened the phone to check if anything was not connected properly, but everything seems fine except for that infinite loop. Please help!
Shotzo said:
I have the same problem, I have tried all kinds of soft reset and nothing is working I also opened the phone to check if anything was not connected properly, but everything seems fine except for that infinite loop. Please help!
Click to expand...
Click to collapse
Try this
Download phone's Stock Firmware onto your personal computer.
Install the USB MTK Drivers - NOT ANY OTHERS (skip if you have them already installed).
Download and Launch the Smart Phone Flash Tool (SP Flash Tool)
Click the Scatter-loading button to navigate to the Stock Rom you just downloaded.
Select the Scatter File from the extracted Stock Firmware on your computer.
Select the Download Only in the SP flash tool option
Click the Download button to start the Formating process.
Connect your phone via USB to the computer>> holding volume + and volume – button of your phone at the same time or holding power button only so that the flashing process will starting working
Patiently wait for your device to be formatted.
After the formatting is done, a Big Green button will pop up on the SP Flash to show that.
Unplug phone and boot it up.
If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
Voila, you are all good.
Hi all,
This is a brief guide on what are some things that could go wrong if you decide to flash a new ROM especially GSI as they are quite buggy at the time of writing this post. I'll try to mention as many issues as I can but if something remains, please feel free to write them in the reply.
The guide is aimed for complete beginners who were trying to flash something and are now stuck OR who just want to know what to be prepared for and not to panic. if you are experienced you might not need it but it might just help you with something.
also, as always, I AM NOT RESPONSIBLE IF SOMETHING DOES NOT WORK. YOU ARE RESPONSIBLE FOR YOUR OWN ACTIONS.
So let's start with the most common problem. Bootloops!
1 - Bootloops :
What happens? : The title is pretty self-explanatory. You know you are in a bootloop if your phone turns off automatically as soon as it turned on. This generally happens BEFORE the phone actually boots up i.e. in the booting screen but could also happen after the phone completely turned on. There are various causes for this it may be due to a bug in the ROM or missing system files.
How to fix? : If you are flashing a custom ROM then you may want to reboot back to TWRP, wipe and flash it again. It works sometimes if there was an issue with the files.
I am unable to reboot to TWRP my phone is stuck even long pressing the power button does not shut it down! :crying::crying: : well if you are stuck you don't actually need to open the back panel to remove the battery or wait for it to die those won't help. all you need to do is wait for the phone to turn off and IMMEDIATELY press and hold the VOLUME UP and POWER button that should get you into TWRP if that doesn't work then you can try pressing and holding the VOLUME UP + DOWN + POWER key as the phone is about to turn on. it might boot you into download mode. if that does not work as well then as the phone is about to turn on, press and hold VOLUME UP + DOWN and plug the phone into PC that will get you booted into download mode eventually. Once you have access to one of these you can continue doing whatever you were doing. To reset everything back to normal (stock, like a new phone) checkout the solution listed below.
2 - I was doing something and now my phone is stuck at charging mode :
What happens? : This has happened to me while flashing PHH GSI. My phone was plugged into the charger and I restarted the phone. turns out it was a fatal mistake for the bugged gsi. The phone now only showed a battery icon that was charging very similar to the one that you would see if your phone is out of battery and you put it to charge. This happens before the phone actually turns on. usually, once you unplug the charger the phone automatically restarts but in my case it didn't. It was stuck at that screen with no way out.
How to fix? : turns out it's pretty easy, it might seem like its doing NOTHING, not responding to power buttons or anything but internally it is. Surprisingly, if you press and hold the VOL UP + DOWN + plug it into the PC it would get you into the download mode.
3 - I flashed GSI and ... :
What happens? : There are MANY things that can go wrong with GSI if you are a beginner I would suggest you stay away from GSI until it supports the device better. For me, I flashed PHH gsi and it went smoothly I booted in but as soon as I was finishing the setup adding fingerprint the ROM went into bootloop. you know how to fix this now. if nothing works, just refer to the reset solution listed below.
4 - "Custom binary blocked by FRP lock" :
What happens? : This usually (at least with me) happens when you are trying to flash something but forget to flash the DmVerity thing. The phone won't turn on and going to download mode will throw you with a line saying FRP lock.
How to fix? : At this point, trying to install custom binaries with Odin probably won't help as for me it simply stated that you cant install custom binaries only Samsung official updates are allowed or something similar. There might be a better/easy solution to this but I found doing a stock reset with Odin worked great. It is given below refer to that.
5 - Phone is in "Emergency firmware recovery" Mode :
What happens? : Turning on the phone throws you into a cyan screen saying that your phone needs emergency firmware recovery which can be done using Samsung smart switch
How to fix? : I believe it is a fantasy way of Samsung saying that your phone is almost dead and nothing remains on it. Fear not, turns out that cyan screen is actually the download mode. so that's a win you don't even have to boot to download mode just connect your phone to pc odin and follow the reset to stock firmware as mentioned below.
6 - I am back in some OS but my internal memory is shortened!!!
What happens? : well you are in the os you wanted but if you check the storage it appears to be shortened. i.e. if your phone has 64gb internal memory it might appear as 30gb or 20gb.
How to fix? : This is a problem caused by missing PIT file in odin. I would not suggest you to manually download the PIT file from somewhere and flash it using odin because doing so got me stuck in the FRP LOCK (4th) situation. I would suggest that you flash the stock firmware using the method given below.
MASTER SOLUTION/RESET TO STOCK FIRMWARE: if you are new to modding I would suggest that you download the stock firmware files from here BEFORE doing anything as the files exceed more than 3GB in size and not everyone has fast internet. if anything goes wrong and you have access to download mode you can follow this and get everything back to stock. Download the stock file AFH given at the link. once you download the stock firmware you just need to extract it and put the respective files in odin and begin flash. it will RESET everything and make it a new phone. I've tried this method and it works always for me.
That concludes my guide. if anyone knows any better solutions to these problems or think I've written something wrong please feel free to correct me. I've faced all of these issues back to back when I tried flashing a GSI and was able to fix all of them so this is just my personal experience.
Lastly, don't panic if something happens wrong happens there is probably a way to fix it.
Depends on many things, but now that we have a working TWRP, life is much easier, and also we have kitchen tools which help as well.
thvardhan said:
Hi all,
This is a brief guide on what are some things that could go wrong if you decide to flash a new ROM especially GSI as they are quite buggy at the time of writing this post. I'll try to mention as many issues as I can but if something remains, please feel free to write them in the reply.
The guide is aimed for complete beginners who were trying to flash something and are now stuck OR who just want to know what to be prepared for and not to panic. if you are experienced you might not need it but it might just help you with something.
also, as always, I AM NOT RESPONSIBLE IF SOMETHING DOES NOT WORK. YOU ARE RESPONSIBLE FOR YOUR OWN ACTIONS.
So let's start with the most common problem. Bootloops!
1 - Bootloops :
What happens? : The title is pretty self-explanatory. You know you are in a bootloop if your phone turns off automatically as soon as it turned on. This generally happens BEFORE the phone actually boots up i.e. in the booting screen but could also happen after the phone completely turned on. There are various causes for this it may be due to a bug in the ROM or missing system files.
How to fix? : If you are flashing a custom ROM then you may want to reboot back to TWRP, wipe and flash it again. It works sometimes if there was an issue with the files.
I am unable to reboot to TWRP my phone is stuck even long pressing the power button does not shut it down! :crying::crying: : well if you are stuck you don't actually need to open the back panel to remove the battery or wait for it to die those won't help. all you need to do is wait for the phone to turn off and IMMEDIATELY press and hold the VOLUME UP and POWER button that should get you into TWRP if that doesn't work then you can try pressing and holding the VOLUME UP + DOWN + POWER key as the phone is about to turn on. it might boot you into download mode. if that does not work as well then as the phone is about to turn on, press and hold VOLUME UP + DOWN and plug the phone into PC that will get you booted into download mode eventually. Once you have access to one of these you can continue doing whatever you were doing. To reset everything back to normal (stock, like a new phone) checkout the solution listed below.
2 - I was doing something and now my phone is stuck at charging mode :
What happens? : This has happened to me while flashing PHH GSI. My phone was plugged into the charger and I restarted the phone. turns out it was a fatal mistake for the bugged gsi. The phone now only showed a battery icon that was charging very similar to the one that you would see if your phone is out of battery and you put it to charge. This happens before the phone actually turns on. usually, once you unplug the charger the phone automatically restarts but in my case it didn't. It was stuck at that screen with no way out.
How to fix? : turns out it's pretty easy, it might seem like its doing NOTHING, not responding to power buttons or anything but internally it is. Surprisingly, if you press and hold the VOL UP + DOWN + plug it into the PC it would get you into the download mode.
3 - I flashed GSI and ... :
What happens? : There are MANY things that can go wrong with GSI if you are a beginner I would suggest you stay away from GSI until it supports the device better. For me, I flashed PHH gsi and it went smoothly I booted in but as soon as I was finishing the setup adding fingerprint the ROM went into bootloop. you know how to fix this now. if nothing works, just refer to the reset solution listed below.
4 - "Custom binary blocked by FRP lock" :
What happens? : This usually (at least with me) happens when you are trying to flash something but forget to flash the DmVerity thing. The phone won't turn on and going to download mode will throw you with a line saying FRP lock.
How to fix? : At this point, trying to install custom binaries with Odin probably won't help as for me it simply stated that you cant install custom binaries only Samsung official updates are allowed or something similar. There might be a better/easy solution to this but I found doing a stock reset with Odin worked great. It is given below refer to that.
5 - Phone is in "Emergency firmware recovery" Mode :
What happens? : Turning on the phone throws you into a cyan screen saying that your phone needs emergency firmware recovery which can be done using Samsung smart switch
How to fix? : I believe it is a fantasy way of Samsung saying that your phone is almost dead and nothing remains on it. Fear not, turns out that cyan screen is actually the download mode. so that's a win you don't even have to boot to download mode just connect your phone to pc odin and follow the reset to stock firmware as mentioned below.
6 - I am back in some OS but my internal memory is shortened!!!
What happens? : well you are in the os you wanted but if you check the storage it appears to be shortened. i.e. if your phone has 64gb internal memory it might appear as 30gb or 20gb.
How to fix? : This is a problem caused by missing PIT file in odin. I would not suggest you to manually download the PIT file from somewhere and flash it using odin because doing so got me stuck in the FRP LOCK (4th) situation. I would suggest that you flash the stock firmware using the method given below.
MASTER SOLUTION/RESET TO STOCK FIRMWARE: if you are new to modding I would suggest that you download the stock firmware files from here BEFORE doing anything as the files exceed more than 3GB in size and not everyone has fast internet. if anything goes wrong and you have access to download mode you can follow this and get everything back to stock. Download the stock file AFH given at the link. once you download the stock firmware you just need to extract it and put the respective files in odin and begin flash. it will RESET everything and make it a new phone. I've tried this method and it works always for me.
That concludes my guide. if anyone knows any better solutions to these problems or think I've written something wrong please feel free to correct me. I've faced all of these issues back to back when I tried flashing a GSI and was able to fix all of them so this is just my personal experience.
Lastly, don't panic if something happens wrong happens there is probably a way to fix it.
Click to expand...
Click to collapse
Absolutely well written for new users who wish to get into the world of Android on their Samsung. Might I suggest a few corrections?
Akhil99 said:
Absolutely well written for new users who wish to get into the world of Android on their Samsung. Might I suggest a few corrections?
Click to expand...
Click to collapse
Sure by all means, feel free to suggest any modifications/corrections.:highfive:
Hi Community,
I read some posts how to fix my Problem, but i cant go to a service Point.
So I was using the Evolution X for a long Time (Installed with TWRP 3.1.0).
And now i wanted to change to the Nusantara Project (Vanilla), I did a clean Flash, everything worked i could access the System.
Than i had problems installing Play Store, so i rebooted into Recovery via the System. But now im Stuck in the Loop.
Can i Somehow connect my Phone to the PC and Reset?
Can someone tell me if i Hard/soft bricked my phone ?
Just a little advice, would be really appreciated.
Thanks a lot
Go to TWRP, wipe system, cache, data and dalvik. Now flash nusantra and whichever GApps are recommended for it (if there are no recommendations then use OpenGApps, make sure the architecture is correct). Now wipe dalvik and restart. Sometimes, certain roms begin to bootloop if you boot into the rom first, then try to install gapps later.
If you still have issues, just reflash the stock rom.
I cant access the TWRP anymore, im just stuck on the Bootloader, no matter how i turn on The Phone (Volume Up + Power ON ), (Volume Down + Power), (All 3 Buttons)
Nothing works anymore i dont understand ....
Im searching the net but i cant go to fastboot or something else, its just keeps on rebooting ...
So it's bootlooping, but you cant access recovery?
When the screen turns off, press the key combo and it should go to recovery.
Your best bet is to take it to a service centre, but if that really isn't possible for you, then wait for its battery to drain completely, then when you plug in the charger, instead of turning the phone on, press the key combo to enter the recovery. From there, wipe and flash some other OS.
I've also heard that certain versions of TWRP don't support some roms, leading to a bootloop. In that case, you'll have to use orangefox recovery to flash the rom (orangefox is flashable via twrp)
Yes its Bootlooping.
When i turn it on, on the Left Corner "Recovery Mode" blinks for one second. Than the usual Text appears:
"Orange State
Your Device has been unlocked and cant be trusted
Your Device will boot in 5 Seconds".
So after a couple of seconds (around 10-20 sec)
It turns off and immediately on again. I Just can turn it OFF when i hold all 3 Buttons.
Than i try starting it with Volume up + Power / Volume down + Power, But i cant access Recovery or TWRP.
So i should wait til the battery gets low and try it again ?
Like i said, my custom Rom (Evolutionx) and TWRP just worked fine. I dont know man ...
Well since your bootloader is unlocked, try flashing the stock rom again. Look for a tutorial and follow it.
Hi I managed to unbrick my device with this guide, and im back on a stock rom
Unbrick
i ran following commands to get to my custom rom:
I run adb reboot bootloader,
add executed following commands.
(Pitch Black recovery 3.1)
- adb reboot bootloader
- fastboot flash recovery recovery.img
-fasboot reboot recovery
It just hang up and booted after a while into the normal system.
But im not able to get to the recovery menu ?
When I restart and hold Volume up + Power, i go in a loop and the phone keeps restarting over and over again.
what have i Fu**ed up ?
Do i need another recovery tool ?
sorry guys, i appreciate your help a lot tho !
EDIT: Is my bootloader unlocked ?
I can access via "adb reboot bootloader" the phone
and on the blackscreen on the phone it is written:
oppo verfiy pass
fastboot_unlock_verify ok
Update:
So i tried some Stuff and i got Red State. No Problem i Unbricked it once again and now im on Stock Android 10.
Now im Trying to enable the bootloader again.
I downloaded the In Depth Test_Realme_6.apk but i keep getting the Error that i should update the system.
So should i update the system ?
I cant find a CURRENT Tutorial to make this work, please help...
If you cant find a tutorial for your version, why not downgrade back to a previous one if possible.