Related
That's easy, if your phone is bricked like too many people do it:
http://www.youtube.com/watch?v=zS2LIuy6YfY
That's what I tell to many people do and they said it works, so stop spamming the sections speaking: "My cellphone is bricked, help me!". Hope it saves your life too
UPDATE: According to our friend, the updated version of PC companion doesn't work anymore, so please check the instructions on this video!
http://www.youtube.com/watch?v=t6QhJaCsdD4
Hello.
I'm having problems with my XPERIA x10i phone. This morning I was changing the case with new one. The full case, not just the cover. And then, my software was stuck in a loop at the Sony Ericsson logo. I tried installing the software with PC Companion, Update Service, FlashTool and none of them seems to work! They all stuck at the same place!
What could be the problem???
Thanks in advance!
Vengeance66 said:
Hello.
I'm having problems with my XPERIA x10i phone. This morning I was changing the case with new one. The full case, not just the cover. And then, my software was stuck in a loop at the Sony Ericsson logo. I tried installing the software with PC Companion, Update Service, FlashTool and none of them seems to work! They all stuck at the same place!
What could be the problem???
Thanks in advance!
Click to expand...
Click to collapse
You probably didn't put it back together properly.
SmG67 said:
You probably didn't put it back together properly.
Click to expand...
Click to collapse
I thought of that and I've reassembled looking at this video youtube com /watch?v=JVBTCgAzkY4
I did everything like in the video. If I didn't put anything correctly, the phone wouldn't start... :/
Any specific ideas to look for?
Thanks a lot!
If you had the battery disconnected during your work changing the case (and you definitely should), then put your phone to charge in wall plug for at least 15 minutes (or even more) and then try to turn it on...
dimfil said:
If you had the battery disconnected during your work changing the case (and you definitely should), then put your phone to charge in wall plug for at least 15 minutes (or even more) and then try to turn it on...
Click to expand...
Click to collapse
I've tried and after 5 min. the phone start itself and starts the loop.
I've installed older version of FlashTool and read this line:
Loader version : R4A024 / Bootloader status : UNROOTABLE
I'm trying again...
Did you successfully flash firrmware using flashtool? If so, whaat firrmware did you use?
teddymild said:
Did you successfully flash firrmware using flashtool? If so, whaat firrmware did you use?
Click to expand...
Click to collapse
I used the latest version of Flashtool, and later I tried older version. No use...
I opened a thread explaining everything I did...
http://forum.xda-developers.com/showthread.php?p=35199815#post35199815
Does it mean you can't get flashtool flash firmware? Or after flashing you're facing the same problem ?
teddymild said:
Does it mean you can't get flashtool flash firmware? Or after flashing you're facing the same problem ?
Click to expand...
Click to collapse
After flashing I'm facing the problem. Now, the phone just shows the lights on the screen, no SE logo...
The flashing finishes perfectly with no errors and the phone is connecting again in flash mode with the green LED in the upper part. But, when I try to turn on the phone, just the blank screen is lighted, no logo...
Is my phone dead?
I think so
Sorry I can't help you.
Edit. Have you tried another firmware/re download the file? Just in case. Good luck bro.
teddymild said:
I think so
Sorry I can't help you.
Edit. Have you tried another firmware/re download the file? Just in case. Good luck bro.
Click to expand...
Click to collapse
Yes I tried. Do you have any working firmware (tried)?
In the service center, the guy told me something about wiring the phone under the battery. That was the last hope for the phone...
Thanks!
Vengeance66 said:
Yes I tried. Do you have any working firmware (tried)?
In the service center, the guy told me something about wiring the phone under the battery. That was the last hope for the phone...
Thanks!
Click to expand...
Click to collapse
What is your exact model? Because you stated you were running Gingerbread 2.3.3 on it... Was that the original firmware it came with? I think you need to be in this forum, for the 'big' X10, and not the X10 Mini (e10i).
SmG67 said:
What is your exact model? Because you stated you were running Gingerbread 2.3.3 on it... Was that the original firmware it came with? I think you need to be in this forum, for the 'big' X10, and not the X10 Mini (e10i).
Click to expand...
Click to collapse
Yes I know, sorry my bad. You are right, I'm not in the right place... But, none answers on x10 forums. I got Xperia X10i model that came with the original firmware which was officially updated to 2.3.3.
Sorry for replying here, but I opened up a thread there in which I explain everything detailed...
Thanks!
Vengeance66 said:
Yes I know, sorry my bad. You are right, I'm not in the right place... But, none answers on x10 forums. I got Xperia X10i model that came with the original firmware which was officially updated to 2.3.3.
Sorry for replying here, but I opened up a thread there in which I explain everything detailed...
Thanks!
Click to expand...
Click to collapse
It's ok, but i don't think any of us have firmware for your phone... You'll have to find it there...
http://forum.xda-developers.com/showthread.php?p=28235376
How to restore original sony ericsson firmware?
XxLordxX said:
That's easy, if your phone is bricked like too many people do it:
That's what I tell to many people do and they said it works, so stop spamming the sections speaking:
"My cellphone is bricked, help me!". Hope it saves your life too
Click to expand...
Click to collapse
The new version of PC Companion no longer has a repair option, however the same method can be used with SE Update
Service... Watch Youtube Video Tutorial @ watch?v=t6QhJaCsdD4 ... Well hope you find this helpful... Enjoy!
Silichip said:
The new version of PC Companion no longer has a repair option, however the same method can be used with SE Update
Service... Watch Youtube Video Tutorial @ watch?v=t6QhJaCsdD4 ... Well hope you find this helpful... Enjoy!
Click to expand...
Click to collapse
Well, this video was made in 2011 hehe, I'll post an update on the OP then. Thanks for sharing this info .
"This Story Ends Where It Began" - Octavarium (Dream Theater)
Sent from my Monster S4
XxLordxX said:
Well, this video was made in 2011 hehe, I'll post an update on the OP then. Thanks for sharing this info .
"This Story Ends Where It Began" - Octavarium (Dream Theater)
Sent from my Monster S4
Click to expand...
Click to collapse
You're welcome, glad to assist...
Hello !!! I need help Im trying to use the ASUS Unlock Device tool which I downloaded from the ASUS website . So I install the APK and when I run the app it gives me "unknown error occurred which my be due to a network connection error please try again later" i have tried like 100 times with the same results. I have it after i reset the tablet with the same results. I tried it rooted and unrooted nothing seems to work. Please help. If someone can get my tablet unlocked I wouldnt have a problem send some money your way . Thank in advance to anyone who tries to help.
It might be the ASUS Unlocker sever
someone suggested that the unlock server might be down.
hi
did you repaer your tablet at the asus repaer center(mainbourd replace)???
or do you have or has the S\N issus??
MrCat226 said:
did you repaer your tablet at the asus repaer center(mainbourd replace)???
or do you have or has the S\N issus??
Click to expand...
Click to collapse
I had my tablet repaired at ASUS repair center in Texas
Will NVFLASH help this issue in anyway
i was wondering if after NVFLASH comes out will it help in anyway with this issue.
hi
I had my tablet repaired at ASUS repair center in Texas
Click to expand...
Click to collapse
Because of this, does not work for you, From what I know anyone who has replaced the mainboard suffers from these problems
http://forum.xda-developers.com/showthread.php?t=1540967
http://forum.xda-developers.com/showthread.php?t=1646625
MrCat226 said:
Because of this, does not work for you, From what I know anyone who has replaced the mainboard suffers from these problems
http://forum.xda-developers.com/showthread.php?t=1540967
http://forum.xda-developers.com/showthread.php?t=1646625
Click to expand...
Click to collapse
You can add me to the list aswell hehe. My prime has also been at asus service center and I cant unlock either :/
flipz0r said:
You can add me to the list aswell hehe. My prime has also been at asus service center and I cant unlock either :/
Click to expand...
Click to collapse
Me too. I had my motherboard replaced as well.
pandaball said:
Me too. I had my motherboard replaced as well.
Click to expand...
Click to collapse
I'm not sure if they replaced my motherboard or not, but they definitely repaired something in it (keyboard wasn't working before). I will be extremely annoyed if they've somehow prevented RMA-ees from unlocking the bootloader. That's part of the reason I bought the damn thing in the first place.
djwascom33 said:
i was wondering if after NVFLASH comes out will it help in anyway with this issue.
Click to expand...
Click to collapse
Afaik, nvflash needs bootloader fully unlocked.
Sent from my i9250
Ok i unbricked my phne but after i flashed the rom this happened to the screen it responds as one big screen but it split into 4 with fuzzy colours wtf ?
alaincamenzuli said:
Ok i unbricked my phne but after i flashed the rom this happened to the screen it responds as one big screen but it split into 4 with fuzzy colours wtf ?
Click to expand...
Click to collapse
Maybe the display drivers got broke in kernel?!
coolsandie said:
Maybe the display drivers got broke in kernel?!
Click to expand...
Click to collapse
yeah it could be its an hdc galaxy note with mtk6577 or haipai i9277
any idea how i can re install the driver
alaincamenzuli said:
yeah it could be its an hdc galaxy note with mtk6577 or haipai i9277
any idea how i can re install the driver
Click to expand...
Click to collapse
You should flash the stock boot.img to rectify that issue, if you are sure its pretty much the problem with kernel.
coolsandie said:
You should flash the stock boot.img to rectify that issue, if you are sure its pretty much the problem with kernel.
Click to expand...
Click to collapse
probem is i don't have the original one i flashed and update of it but it ****ed the phone
alaincamenzuli said:
probem is i don't have the original one i flashed and update of it but it ****ed the phone
Click to expand...
Click to collapse
Maybe borrow the boot.img from someone who owns this device, or claim warranty by going into Service Center.
coolsandie said:
Maybe borrow the boot.img from someone who owns this device, or claim warranty by going into Service Center.
Click to expand...
Click to collapse
yeah but it seems no one has such a device haha
alaincamenzuli said:
yeah but it seems no one has such a device haha
Click to expand...
Click to collapse
Then Service Center it is. Tell them, you've installed some apps, and this is what happened. :silly:
i would either reflash the stock rom first - or if nowhere to be found - flash some other rom that fits for your device. in hope that the damaged rom part gets overwritten and so repaired
I FIXED by being intelligent im going to write a new thread and guide on how to fix this
I own a i9277, did your firmware upgrade succeed? and how did you fix your problem. hope to see your tutorial soon!
After I flashed stock rom ,I am getting this message on my phone
Tool download fail ! blocking here for 1 min.then auto shutdown.Error code 0x99256658
Realme1
I somewhere watched that flashing "oppo_custom.bin" solves the problem.
but I am not getting that file.
can anyone share that file for realme 1 please...
Bro.. they said any kind of Oppo custom would work in both Oppo|Realme..
My only problem is i want to Flash|Write this using SP Flash Tool, but SP FlashTool giving me this error "Staus Sec Data Not Allowed", and i aint know how to fix this up..
Has anyone solved this problem using software? I have chp2021 oppo a91 same error 0x99256658. Flashtool cant write protected partition. I tried using different tool but same. It seems just using tp method will work.
Pulian said:
Has anyone solved this problem using software? I have chp2021 oppo a91 same error 0x99256658. Flashtool cant write protected partition. I tried using different tool but same. It seems just using tp method will work.
Click to expand...
Click to collapse
They said it will fix only using a dongle, like UFIBOX or JTAG..
I unlocked bootloader in bricked condition and now I can write every partition but still error 0x99256658. I wrote custom.bin and some hidden partition opporeserve2.img but no success... I thinks is necessary dump another partitions from good phone
Pulian said:
I unlocked bootloader in bricked condition and now I can write every partition but still error 0x99256658. I wrote custom.bin and some hidden partition opporeserve2.img but no success... I thinks is necessary dump another partitions from good phone
Click to expand...
Click to collapse
You already unlocked the bootloader of that oppo? i thought oppo is selfish
This is for Realme 1 device.
If you guys are still facing issues. Then use Miracle Box method. This works perfectly. I unbricked my device thrice. One thread is also available in Realme 1 section on how to use miracle box. Beware there are some complications in using that tool.
Naveen56 said:
This is for Realme 1 device.
If you guys are still facing issues. Then use Miracle Box method. This works perfectly. I unbricked my device thrice. One thread is also available in Realme 1 section on how to use miracle box. Beware there are some complications in using that tool.
Click to expand...
Click to collapse
But miracle needs a box, and we can't afford it hehehe
Jona'san - sama said:
But miracle needs a box, and we can't afford it hehehe
Click to expand...
Click to collapse
No you don't need to pay for anything. We have been using that software from over a year.
Also you don't need anything like box.
Naveen56 said:
No you don't need to pay for anything. We have been using that software from over a year.
Also you don't need anything like box.
Click to expand...
Click to collapse
What kind of miracle box? The cracked version.. ?
Jona'san - sama said:
What kind of miracle box? The cracked version.. ?
Click to expand...
Click to collapse
Yes, that's the one I was talking off.
Naveen56 said:
Yes, that's the one I was talking off.
Click to expand...
Click to collapse
I Didn't try it yet, cause i only see in youtube tutorials they always using a box..
But my phone got a lot worse now, my pc can't detect my old phone now.. so this time i really need a box to wake up the board of this phone
Jona'san - sama said:
I Didn't try it yet, cause i only see in youtube tutorials they always using a box..
But my phone got a lot worse now, my pc can't detect my old phone now.. so this time i really need a box to wake up the board of this phone
Click to expand...
Click to collapse
You got to be very careful when following some YT tuts. There are many misleading ones. Also becareful while downloading files they share.
There is one YT video which most of us took as a reference to unbrick this device.
Naveen56 said:
You got to be very careful when following some YT tuts. There are many misleading ones. Also becareful while downloading files they share.
There is one YT video which most of us took as a reference to unbrick this device.
Click to expand...
Click to collapse
Yeah, but i got a trusted one.. Martview, take a visit of his youtube channel..
yeah, will look into that when I have time.
Naveen56 said:
This is for Realme 1 device.
If you guys are still facing issues. Then use Miracle Box method. This works perfectly. I unbricked my device thrice. One thread is also available in Realme 1 section on how to use miracle box. Beware there are some complications in using that tool.
Click to expand...
Click to collapse
hello good pm im from the ph and im facing the issue of download error code 0x992566 fix. can the miracle box fix the problem?
Undeadcimus said:
hello good pm im from the ph and im facing the issue of download error code 0x992566 fix. can the miracle box fix the problem?
Click to expand...
Click to collapse
I did not face that error but on most cases Miracle Box should work.
Naveen56 said:
I did not face that error but on most cases Miracle Box should work.
Click to expand...
Click to collapse
did u know the process?
Naveen56 said:
I did not face that error but on most cases Miracle Box should work.
Click to expand...
Click to collapse
Hi there naveen,
I am really confused here,..
Please help me out..
My phone realme c2 is hard bricked meaning it shows 'download not completed' and then loops again and again.
I was thinking if I can install the oppo_custom file through only software and a usb cable. Is it possible?
yas8say said:
Hi there naveen,
I am really confused here,..
Please help me out..
My phone realme c2 is hard bricked meaning it shows 'download not completed' and then loops again and again.
I was thinking if I can install the oppo_custom file through only software and a usb cable. Is it possible?
Click to expand...
Click to collapse
Did you try with Firmware Upgrade?
Hello everyone, I know it may look stupid, but I, unfortunately, chose an incorrect mobile carrier when I am using the google pixel 6 repair tool. My phone is now stuck on the `installing system update' and i have no idea what should I do
Why were you using the Pixel Repair tool?
Is your bootloader unlocked?
V0latyle said:
Why were you using the Pixel Repair tool?
Is your bootloader unlocked?
Click to expand...
Click to collapse
It is because I replaced my screen, and I have been misled to reinstall to reactive my fingerprint sensor...
I just find that there is another option for the fingerprint sensors, but it is too late for me because my phone is stuck now...
Brian0612 said:
It is because I replaced my screen, and I have been misled to reinstall to reactive my fingerprint sensor...
I just find that there is another option for the fingerprint sensors, but it is too late for me because my phone is stuck now...
Click to expand...
Click to collapse
You didn't answer my question. Is your bootloader unlocked? Why did you decide to use the Pixel Repair Tool after replacing your screen?
A factory reflash should be all that is necessary, but I need more information from you before I provide a recommendation.
V0latyle said:
You didn't answer my question. Is your bootloader unlocked? Why did you decide to use the Pixel Repair Tool after replacing your screen?
A factory reflash should be all that is necessary, but I need more information from you before I provide a recommendation.
Click to expand...
Click to collapse
Thank you for your help. I just restart my pixel and it works now... but the fingerprint calibration seems failed and it seems it is a common problem that has no solution at this moment.
Brian0612 said:
Thank you for your help. I just restart my pixel and it works now... but the fingerprint calibration seems failed and it seems it is a common problem that has no solution at this moment.
Click to expand...
Click to collapse
Dude not trying to bea d*ck but if you can't answer a simple question how you expect someone to help you out?
Brian0612 said:
Thank you for your help. I just restart my pixel and it works now... but the fingerprint calibration seems failed and it seems it is a common problem that has no solution at this moment.
Click to expand...
Click to collapse
You need to wipe after using fingerprint calibration tool.