my rather pleasant experience, so i purchased a huawei mate 10 pro US version BLA A09 C567 and BL unlocked and rooted with fhmatetool, all was well and i decided to install magisk so i unrooted within supersu app and removed su and i installed twrp and side loaded magisk but it said system already modified and recommended flash boot image again but its no where to be found, so i used hi suite and allowed hbd instead of USB debugging and it found my device and immediately showed i have an update available which is what i was looking for and it installed it and on reboot i guess it tried to take me to e recovery to f reset but twrp was there instead of e recovery and i did a f reset from there and rebooted system and it still showed my device cant be trusted as it is bl unlocked and it tried to boot but could not and stuck in boot loop and i thought i was a gonner and needed funkyhuawei services but after few reboots it erased twrp and installed e recovery itself and i was able to f reset and reset cache as well and all is well now, my questions remain though, even after this update why does the bl unlock still exist as it should be re locked with update but it did not. and after setting up as new phone i still have the old firmware version and its not updated and when i connected to hi suite again it said same update available and installed it again and the same thing again and on reboot after update twrp showed up again and i did not f reset this time and did not allow any system modifications and rebooted system and it did not boot loop and booted completely this time but firmware is still the old one and i dont why it is not updating. so i thought maybe bl unlock was te probelm and relocked bl and now it kept booting back to emui recovery and would not boot system and my phone not supported erecovery in hisuite and bl unlocked again and then it booted back to twrp and then to system from there, does anyone know whats going on here and how can i flash the update thorugh COMMAND?
Related
So I decided to unlock the bootloader and flash TWRP, i knew that unlocking it would wipe the data but what happened to me was that after trying to reboot into the system and install SuperSU it would always return to recovery and now it says no OS detected. So now i have to flash a completely stock image and i dont have one. Can anyone help???
EDIT: Used the restore tool(cant remember who by) and it worked fine.
Official twrp does not support squashfs which the new system is in, here is an unofficial build from the twrp forum on the lg g watch
http://www.mediafire.com/download/apwtscp0tn0y8qd/twrp-3.0.0-0-dory+squashfs.img
follow my guide here for rooting on android wear 6.0: http://forum.xda-developers.com/apps/supersu/android-wear-6-0-1-root-squashfs-t3319097
I have a Z5C(E5803) that was originally able to unlock the bootloader and let me flash ROMs, specifically the Cyanogen ROM that CTXz has been working on. I ran out of power and got stuck in some kind of nasty bootloop yesterday that prompted me to re-flash boot.img and TWRP.
After I did these things I left it charging for a few hours and it was able to boot into TWRP where I then restored it to a backup of the basic Xperia pre-loaded ROM.
This all worked fine, thought I could boot into TWRP and just flash the Cyanogen zip again. I can get into TWRP just fine but I attempt to flash Cyanogen I get an "ERROR 7"
I have since done several wipes, gotten into the bootloader settings by entering that code in the dialer and have seen that bootloader unlock = no. I distinctly remember bootloder unlocking being allowed the first time I installed CM on my device, what could have caused this?
I was able to use it with fastboot anyway and install CM13 again, maybe this was a bug?
When I tried using oem unlock command with fastboot it said my device was already rooted even though I had just restored from a backup, and then I just proceeded normally from there.
use CM13 official Recovery to FLASH CM13.
also i don't think so twrp3.0.2 is out there for z5c. are you using any other variants Twrp? (YUGA ? )
Hi everybody,
I got my Swift 2 8 months ago and have finally decided to root it using TWRP. So I unlocked my bootloader and then installed TWRP using the official guide at https://twrp.me/devices/wileyfoxswift2.html. I also wiped my cache and dalvik cache.
However, now I have done this, whenever I try to boot, I receive both the amber and red warnings about corruption and then get stuck in a bootloop on the first black and white boot image.
Please can someone help me get back into android; if possible I would like root but in the end just a working phone.
Thanks.
As far as I know it's a dm-verity issue. There might be several ways to fix it but the only one I know is to flash Magisk from TWRP. I still run version 12 because 13.x won't install for me.
From my expierience, unlocking and locking bootloader will wipe your userdata , so backup! How I root mine is, first unlock through fastboot, than fastboot boot twrp, instead of flashing, flash magisk through twrp, than lock the bootloader again through fastboot. This keeps you from getting messages about corruption and has you rooted. Whenever I need twrp I just boot it instead of flashing it. I also made a backup using twrp, just to keep things safe and easy to restore...
Edit: To get out of bootloop you either do a factory reset or flash the image found in this forum using fastboot update...
You should have a look at this thread: https://forum.xda-developers.com/swift-2/how-to/marmite-wileyfox-ota-nougat-android-7-1-t3654999
my honor 9 has been stuck in a boot loop for a while know the phone is unlocked and so is FRP and im pretty new to this and im looking for tips i think i accidentally completely wiped my honor 9 everything and i need a way to install the stock rom back on to my phone.
if anyone can help i will be very great full
also i cannot wipe it through the recovery mode as it fails at like 20% for some reason and whenever i boot it will load up the honor logo and the screen will go black and then it will go to e recovery.
someone plz help.
Have you tried flashing TWRP as the recovery? (if its available yet) you should be able to do a full system wipe from there, then re-install a factory image. you will need to unlock the bootloader first so need to get a code for this from huawei's support site.
ambitiousButRubbish said:
Have you tried flashing TWRP as the recovery? (if its available yet) you should be able to do a full system wipe from there, then re-install a factory image. you will need to unlock the bootloader first so need to get a code for this from huawei's support site.
Click to expand...
Click to collapse
i allready installed twrp before and doone a factory reset through that and allready have an unlocked bootloader however i cant install the factory image thats the part im stuck at
edit: will i need to buy dc pheonix to force install the software as i cannot find a way to install.
You might want to try using the huawei updater tool to flash stock recovery and firmware.
Hello dears ,
i have a chinese mate 10 alp-L00 phone and have alread unlocked the bootloader. i have following questions.
1. How can i root the phone?
2. Can i install any custom recovery? TWRP?
3. if so what are the procedures.
WHAT HAVE I DONE?
i unlocked the boot loader
i rooted the phone with FUNKYHUAWEI ROOT TOOL
after rooting it i restored all the data from other huawei phone (35 GB which took a long time) but without checking whether the root was successful or not. after getting into the phone i downloaded the SUPERSU from playstore and installed it asked me whether i have TWRP or CWM ofcourse i did not have TWRP so i selected the other option. system boot is needed and then after the boot the phone is ****ed up. only logo which took 1 hour nothing happened. i have just put a system reset (2.5 GB downloaded from net) and now am still UNROOTED (or rooted am not sure) bootloader unlocked.
anyone who can help me
1. ROOT MY DEVICE mate 10
2. Install a custom recovery if there is any
REGARDS...
u should have...
1. unlock bootloader
2. fastboot install twrp
3. root
4. install latest kernal if needed.
now it looks like u may softbricked your phone, go contact funkyhuawei on how to recover your phone with $$$
this is what i have done.
1. restored the phone to stock rom
2. unlocked the bootloader
3. rooted the phone
4. installed my old apps
ALL LOOKED FINE UNTILL. the phone got an update and relocked the bootloader and ofcourse unrooted the phone. everytime it updates the phone it will unroot + relock the bootloader. ANY SOLUSTION
and! where can i have my hands on TWRP for MATE 10. can anyone put the link. i could not find it anywhere
OK I have solved the problem somehow.
unlocked the bootloader with DC bootloader
rooted the phone with FUNKYHUAWEI
FROZE the updater app so no more updates from huawei whcih relocks the bootloader
will wait for TWRP
REGARDS