Heee guys!
After a reset my m8s mini wont start up anymore
When i put in a usb the red light in the box will light up but my blue light on the front wont. Even the hdmi wont reconise him.
Can some one tell me how to fix this?
Thankyou verry much
Related
Ok here is what goes on with the phone... When its off and you connect the charger or usb data cable the phone wakes up and stays on the htc screen. The rainbow screen displays serial and not usb (even though I swapped the entire case from my wifes mozart phone, which did go to usb from serial in rainbow screen) so the port/ribbon cable cant be faulty. Tried hard reset with origanal 8gb card, tried 16gb card swap and hard reset too.
It goes into usb host mode when camera and volume down button and power buttons are pressed. So my question is this... I can buy a y cable debrand/flash from a well know auction site, but dont know if its a waste of £20? As my phone wont go from serial to usb in the rainbow screen I cant reflash/debrand, does the y cable debranding do the same thing as ansars rom install? Been trying for a week now.
Thanks all... just looking at the big pan spoon now, it will give it more than a scratch I can tell you, so expert replies only as outcome irreversible!
good afternoon,
My xperia mini pro sk17a has a black screen.
Prior to this occurrence, I had a bad flex ribbon cable to the sliding keyboard. Screen would go black and come back with sliding keyboard motion. Opened the phone and found that the cable was torn. Decided to buy a replacement flex cable and installed it. Everything looked okay but...
Once I put the phone back together, no screen at all. If I turn the phone on, there is a very very faint amount of light present (you can only see this in the dark). The phone does boot, and the notification light will flash indicating new messages. I can call the phone and it will ring.
Hoping that this might be some sort of software reset, I tried flashing with the SUS software. No help, phone still behaves as described above. I'm guessing I need a new screen (maybe damaged it somehow taking the phone apart?), but has anyone gone through this and know of a solution other than more new hardware?
Thank you in advance for any help or feedback.
I think new flex cable is also damaged. You should check flex cable in another SK17.
Hi, like i said the phone doesnt charge. The problem can not be the cable or the adapter cause i tried different ones and the original provided with the phone.
Ive tried charging through usb cable from my pc but also no success
Here is exactly whats happening:
I plug the usb cable into the phone and I get the red light blinking then the sign with the battery shows up with a bolt over it (sign it charges).. then after a few seconds the screen goes black and then the sign saying "Sony" and Xperia pops up. This loops without pressing any buttons. Im getting really desperate here.
thanks in advance.
Hei. I was happy owner of chromecast. From one day to another does not work.
Nothing on display. LCD does not reconize signal.
Only red light on device.
Holding button does not change anything.
I try plug pendrive via Y otg/power cable with FlashCast, no reaction. Chromecast does not read any data from pendrive (pendrive has LED light which is blinking during using, in this case no light at all).
Device was not hacked/modded.
Any suggestions?
Dabman said:
Hei. I was happy owner of chromecast. From one day to another does not work.
Nothing on display. LCD does not reconize signal.
Only red light on device.
Holding button does not change anything.
I try plug pendrive via Y otg/power cable with FlashCast, no reaction. Chromecast does not read any data from pendrive (pendrive has LED light which is blinking during using, in this case no light at all).
Device was not hacked/modded.
Any suggestions?
Click to expand...
Click to collapse
Warranty ?
I recently bought this device, it came out broken and this is my first TV box so I don't know what to do. When I plug it in, the screen in front of the device and the light above it do not work. Only a blue LED inside is glowing, no other response. I downloaded stock firmware I'm trying to install it right now but when I connect it to a computer with a usb to usb cable it doesn't show up on my computer. Has anyone experienced such a problem before? Is there a solution to this situation? I have added a few photos to explain my problem. I am waiting for your help, thank you.
kaan173 said:
I recently bought this device, it came out broken and this is my first TV box so I don't know what to do. When I plug it in, the screen in front of the device and the light above it do not work. Only a blue LED inside is glowing, no other response. I downloaded stock firmware I'm trying to install it right now but when I connect it to a computer with a usb to usb cable it doesn't show up on my computer. Has anyone experienced such a problem before? Is there a solution to this situation? I have added a few photos to explain my problem. I am waiting for your help, thank you.
Click to expand...
Click to collapse
Sounds like you got a faulty one, you should look into returning it to the company you bought it off
if thats not an option then you may have to try mask rom mode