I need to find firmware for tablet T990 by alps. I've been looking for it for almost a week and I can't find the right one.
board name: b906_mb_v1.3
I have tried one from firmware1.com, but as it turns out, it's for b906_mb_v1.0, not mine one. Because of my stupidity, I preceded to flash the device without making any back ups. In result, while trying to turn on the device, it gives me white screen with color stripes.
I have also tried 6 firmwares with same board name, which I found on panduoduo.net, however the result was basically the same.
If anyone can help me, I will be grateful!
Hi , here you have what you need .
Firmware:
https://mega.nz/#!9d0lnIhL!yN4sJLxSrQ3IvSwMtB-qRY6z1p7DtdS79W4-hWC58js
MEGA KEY:
!yN4sJLxSrQ3IvSwMtB-qRY6z1p7DtdS79W4-hWC58js
Flash tool - password ( www.firmware1.com)
http://www.firmware1.com/2016/10/sp-flash-tool-51628-duwnload.html
All copyrights reserved to www.firmware1.com
Good luck
I have previously tried this one, but it's for board named b906_mb_v1.0, it even says so in it's name after you extract it (it says "B906V1.0_L_EN_AMW_04_10.1_39PIN_GTTP_3G_FL_WXGA_D_T1-MAX_V0.1_2016-09-03-10-09n").
Related
Hi,
I bought a generic no-brand tablet off eBay - model S750L that uses Rockchip 292x. I tried to root it, but it doesn't boot now. I guess the firmware I used isn't compatible (even though I used RKBatchTool and got a success message). So, I'm asking if anyone out there can point me to the proper firmware? All I can find so far is the name brand stuff like Galaxy tablets.
Thanks!
Someone please help me. The closest I got was some Spanish language firmware - the tablet could boot, but man it was messed up. The screen was off-center, and the touching was misaligned from the icons' locations. Not exactly usable.
me too
I've tried everything. Can someone point us in ANY direction?
Thanks a lot
link ---> 4pda.ru/forum/lofiversion/index.php?t519562.html
Hello,
I know, my question is not new for the most of you and I think it is asked over 1000 times. I tried but I can't find the right working answer for me.
I have a problem, with my old Samsung Galaxy SIII GT- I9300 with T-Mobile branding.
Sorry for my english, but I did not found something useful on german websites but much useful in your forum, so I hope you may help.
The Phone is old, so I have no guarantee any more. I got it from a friend and for him it worked very well till now. It started with freezing on pages and the friend tried to recover the device and I think he did something wrong. The device ended up bricked.
Now, when I want to switch on the device it shows a white screen, with grey and black snow everywhere. Only thing I still can do is going in download mode, then it shows:
___________________________________________________________________
odin mode
Product name: GT-I9300
Custom binary download: No
Current Binary: Samsung Official
System Status: Custom
The robot picture
Downloading...
Do not turn off target !!
________________________________________________________________________
The friend who owned the phone said it is broken and buys a new phone.
I am new to modification phones and all things like that and I haven't got a clue what I'm doing, but I'm interested in learning and don't want to give up.
I read and read and read and looked at google and everywhere and the more I looked, the more different advices I found, but I don't know what will work for my device.
There is another problem, since I don't have a windows or Mac machine, I can't use odin. I work with linux, kubuntu 14.04 ( this is another project,I haven't a clue from, but I'm learning for fun) and I just managed to download JOdin3 Causal, working with heimdall-frontend 1.4.0-0.
I tried to flash firmware with one part and firmware with 3 parts, and I always get from Jodin: that the phone is connected, but there is no pit-file.
I added plenty of pit-files I found in the net, but Jodin said the pit-file was corrupt or broken or Jodin shows on top, left side: „running“ but nothing happens for hours.
Can someone help me. I think I need a firmware and the right pit-file for this firmware. What kind of firmware is not interesting for me, I just want to see the device come back to life again.
I found in the internet, that there is still hope, if the phone shows in odin mode a product name.
Because of this I think that my phone isn't scrap jet. Am I right?
Thanks in advance for your replay.
nina
No, your phone is dead. Try the dead boot recovery thread in general forum for a test but you will need a box.
So I got my X5 today and immediately set about rooting it.
To start I tried to flash TWRP and that put it into a boot loop! Just the initial splash screen.
I managed to get it to boot by flashing via fastboot to what I thought is the correct firmware from the Doogee support site, however the screen is just horizontal bars.
Looking into why it seems clear the lk.bin which contains display drivers must be wrong, but for the life of me I can't find the right one! Every one I flash I get the same result.
The phone came with Marshmellow pre-loaded and build date 20170904, however I can't find this version available to download ANYWHERE! So I'm thinking either I have a new revision of X5 that no one else has properly played with and Doogee have not even put the firmware/revision info up yet, or for some odd reason I got a phone that the seller had flashed themselves with a custom ROM (it came from Amazon and the seller is 'Doogee Official Store' so I don't think this can be the case).
Anyway, any ideas are most welcome. I'm really thinking/hoping I just need the right lk.bin and can flash it alone!
Thanks!
Why don't you contact with doogee to identify which device you have and to direct you to a suitable rom file download?
I have.
Though I’ve since realised the Bootloader is set to locked and USB Debugging is disabled, so even if I get the right load I’m not sure how I will applie it!
I can get to fastboot blind, and to stock recovery blind, but then I can’t see what I’m doing to get to a point I can allow ADB or any other kind of flash.
If I had a screenshot of the stock recovery screen and the steps you can go through from there to allow flashing that might help.
I’ve tried going into the full OS and getting to settings/developer/OEM unlock blind but no joy! Again, screenshots of this process might allow me to press the right bits of the screen (along with a truck load of luck!).
Friend got a clone of a S9+(MT6580) but It had few, major issues, mainly you coudn't download stuff from playstore and so on. So long story short, I got it bricked and I almost lost hope of this phone booting ever again. But I somehow found semi correct firmware, flashed it on it and well, screen has broken graphics. I narrowed this down to a "lk.bin" file which seems to contain "drivers" for LCD. I'm really not an expert in this territory. I tried flashing other lk.bin files from other firmwares and saw a diffrence in the glitchiness of the vertical lines. Some of them didn't even start the screen. So all I'm asking for is, if there's any way to repair this issue without looking for another firmware because believe me, I tried, and this is the only one that the phone likes. I've attached all of the info files of the firmware I could find + the lk.bin file. If you want to help me I can provide anything you need.
I used SP Flash tool v5.1824.
Firmware is MT6580__alps__boway6580_weg_gm_l__boway6580_weg_gm_l__5.1__ALPS.L1.MP6.V2.19_BOWAY6580.WEG.GM.L_P8
Flippy485 said:
Friend got a clone of a S9+(MT6580) but It had few, major issues, mainly you coudn't download stuff from playstore and so on. So long story short, I got it bricked and I almost lost hope of this phone booting ever again. But I somehow found semi correct firmware, flashed it on it and well, screen has broken graphics. I narrowed this down to a "lk.bin" file which seems to contain "drivers" for LCD. I'm really not an expert in this territory. I tried flashing other lk.bin files from other firmwares and saw a diffrence in the glitchiness of the vertical lines. Some of them didn't even start the screen. So all I'm asking for is, if there's any way to repair this issue without looking for another firmware because believe me, I tried, and this is the only one that the phone likes. I've attached all of the info files of the firmware I could find + the lk.bin file. If you want to help me I can provide anything you need.
I used SP Flash tool v5.1824.
Firmware is MT6580__alps__boway6580_weg_gm_l__boway6580_weg_gm_l__5.1__ALPS.L1.MP6.V2.19_BOWAY6580.WEG.GM.L_P8[/QUOTE
I search this firmware please do you send me plz
Click to expand...
Click to collapse
hey guys,
i'm having hard time to find out how exactly to flash my old oem tablet and i really dont expect anyone here to search anything about it(i do that...), just to guide me in general please.
i just found this old tablet and thought i could try to use it as a touchscreen-mp3 player connected to my amplifier...
i charged it and powered it but stuck on "android" logo, i tried many key combinations to put it to recovery mode but i just couldnt find it i guess.
then i started searching of how to flash it...
what is visible from outside is "f&u ETB7405" which brings almost nothing(it's just an oem model) so i opened to see inside where i can see one chip "allwinner a13" and "tzx-q8 713B 6".
it has 7" screen.
based on these i finally found a fimware (using PhoenixCard) that boots normally BUT i get no touchscreen or wifi working. i can connect a usb mouse and have access to it.
do i also have to flash any extra firmware/driver for just the touchscreen or wifi?
what is the most important characteristic("A13" or "TZX-Q8...") to concentrate my search for?
why is it so fcn difficult to find a working firmware???
in case anyone else is having the same issues and hopelessly tries to find the firmware for his device and bumps in unanswered posts or dead links, guys just try different "A13" firmware! Although i'm not really sure that it even has to be "A13"!
i was trying to find firmware with the most of my specs on its name like f.e. "A13-TZX-Q8-713B6" but the paradox happened. the most similar firmware names were not good and i tried a lot! instead i finally decided to just search for "A13" firmware and try any of them one by one despite the names. that was it! i have already found a couple!
from here: ww.androidtablets.net/threads/firmware-based-on-allwinner-a13-roms.72449
a13-TJ P860-V7.1-gsl1680-MID-756-V4.2-20130823-test-keys.zip
all works but there is only "english" and "thai" in keyboard languages.
A13_TWD_MID-gslX680-800X480_20130423 test-keys.rar
all works but touch screen "mirrored" sideways!
good luck to you guys!
thanks