Hi,
I bought a generic no-brand tablet off eBay - model S750L that uses Rockchip 292x. I tried to root it, but it doesn't boot now. I guess the firmware I used isn't compatible (even though I used RKBatchTool and got a success message). So, I'm asking if anyone out there can point me to the proper firmware? All I can find so far is the name brand stuff like Galaxy tablets.
Thanks!
Someone please help me. The closest I got was some Spanish language firmware - the tablet could boot, but man it was messed up. The screen was off-center, and the touching was misaligned from the icons' locations. Not exactly usable.
me too
I've tried everything. Can someone point us in ANY direction?
Thanks a lot
link ---> 4pda.ru/forum/lofiversion/index.php?t519562.html
Hi,
A friend of mine has asked me to take a look at his tablet. All that happens when powering it on is the android logo and nothing else.
It's a chinese import so I'll give what information I can gain from the tablet.
Model Number: P10AN01
10.1" (by the looks of it)
It has the word "DeLUX" written on the back (stylised as I've written it)
It has a HDMI port (plus all the other standard ports)
That's it.. I don't know how to get into recovery (although I've tried holding every combination of buttons I can think of when powering on).
I have a feeling the ROM can only be re-flashed via the SD card but I wouldn't know where to start in looking for the ROM I need.
I am hoping that most of these dodgy imports are generic and there's a pool of ROMs somewhere that people use and one of you lovely people could direct me to
I do find the occasional thread with the model number listed and some ROMs to download but as I'm not confident that it won't be the wrong ROM I have came seeking advice.
Can anyone offer up any advice?
Thanks for reading
Nobody got any pointers or should I just give up on this?
Hello,
I know, my question is not new for the most of you and I think it is asked over 1000 times. I tried but I can't find the right working answer for me.
I have a problem, with my old Samsung Galaxy SIII GT- I9300 with T-Mobile branding.
Sorry for my english, but I did not found something useful on german websites but much useful in your forum, so I hope you may help.
The Phone is old, so I have no guarantee any more. I got it from a friend and for him it worked very well till now. It started with freezing on pages and the friend tried to recover the device and I think he did something wrong. The device ended up bricked.
Now, when I want to switch on the device it shows a white screen, with grey and black snow everywhere. Only thing I still can do is going in download mode, then it shows:
___________________________________________________________________
odin mode
Product name: GT-I9300
Custom binary download: No
Current Binary: Samsung Official
System Status: Custom
The robot picture
Downloading...
Do not turn off target !!
________________________________________________________________________
The friend who owned the phone said it is broken and buys a new phone.
I am new to modification phones and all things like that and I haven't got a clue what I'm doing, but I'm interested in learning and don't want to give up.
I read and read and read and looked at google and everywhere and the more I looked, the more different advices I found, but I don't know what will work for my device.
There is another problem, since I don't have a windows or Mac machine, I can't use odin. I work with linux, kubuntu 14.04 ( this is another project,I haven't a clue from, but I'm learning for fun) and I just managed to download JOdin3 Causal, working with heimdall-frontend 1.4.0-0.
I tried to flash firmware with one part and firmware with 3 parts, and I always get from Jodin: that the phone is connected, but there is no pit-file.
I added plenty of pit-files I found in the net, but Jodin said the pit-file was corrupt or broken or Jodin shows on top, left side: „running“ but nothing happens for hours.
Can someone help me. I think I need a firmware and the right pit-file for this firmware. What kind of firmware is not interesting for me, I just want to see the device come back to life again.
I found in the internet, that there is still hope, if the phone shows in odin mode a product name.
Because of this I think that my phone isn't scrap jet. Am I right?
Thanks in advance for your replay.
nina
No, your phone is dead. Try the dead boot recovery thread in general forum for a test but you will need a box.
Greetings,
I have a Coby Kyros mid7125 that was given to me and I'm trying to restore/refurbish/upgrade it. It has some REAL problems, not the least of which is no functional OS. I have tried to install several different OS's including: ICS and JB. I am able to get them installed, and booted up. But, no matter which I use, the touchscreen is inevitably non-functional, and USB debugging is not enabled. Therefore, I am unable to do much else with it from that point.
I would like to install Gingerbread 2 . 3 . 3 which it had originally, but am unable to find a copy for this model anywhere.
I have searched MANY places online, including this forum (which has helped me Immensely! Thanks for that) but I'm just not finding what I need. Unfortunately, being as this model is so old, most of the links to what I need are no longer functional.
The tablet IS rooted, and I do have CWM installed, however the stock backup is gone, and there are no other functional backups on it.
Do you have any advice for getting the touch screen to work once it is booted into an OS, or where I could get a Custom or Stock ROM for this model??
I am fairly new to the Android universe, but do have quite a bit of experience with other OS's.
ANY help or links you could provide would be MUCH appreciated!!
Ok,....next problem:
Ok, SO........after MUCH searching, and hair pulling from my scalp,...and after not finding any answers here,....I decided to take a different approach:
I downloaded and flashed the firmware for the Coby mid8125 onto my Coby 7125 and it works just fine. Only one problem....the screen is out of alignment, which tends to create problems using the touch screen. Not a surprise considering the 8125 is an 8'' display while the 7125 is a 7'' display.
Back story: I lost the stock recovery image on the 7125 due to some "experimentation" with trying to upgrade the OS and CyanogenMod, and could not revive my 7125. Could not find any copies of the 7125 firmware or stock image anywhere. So, being as they are closely related, I flashed the 7022 firmware onto it. Worked,.....except the touch screen didn't function at all. Turns out, the touch screen on the 7022 has a Capacitive input while the 7125 has a Resistive input. So, I flashed the 8125 firmware, which also uses a Resistive input, onto the 7125 and regained functionality! (yay!!) Unfortunately, the display itself is offset by about 1/4 in. x/y, and receives the input at different positions depending on which side of the screen you're trying to use. (drag!!)
Now: At present, everything is functional, but it's a real hassle constantly turning the tablet, and tapping in different places to run the thing.
So, my plan (another experiment) is to copy the TS driver from the 8125 firmware and insert it into the 7022 firmware (which also uses a 7'' display) and hope it works.
Problem: I need to know where in the file system, on the 8125 and the 7022, to locate the driver for the touch screen???
If someone could provide me with the file path, I would be grateful, and would definitely post the findings of my "experiment" here for others to reference. I know others have had the problem of losing functionality with the touch screen, and this could turn out to be workaround, if successful.
I would like to thank the Many others here whose posts and links have, indirectly, help me in my first foray into the Android universe. Without your sharing I, for one, would have been completely lost with nothing to show, except a nice paperweight, for my trouble. So,.....Thank You ALL!!!
FIXED IT,......Mostly!!
So, it appears tenacity pays off!
Through my own persistence,research, and experimentation, (and with no help from the various forums I've visited)... I managed to come up with a clean, Stock ROM and Backup of Coby MID7125 and, using CM v6, I have flashed it onto my 7125 and have restored it to full functionality! Everything works. Only one problem remains......
The display is still out of alignment. I have tried various means of realigning it, from re-calibrating it to trying to access the POINTERCAL file to adjust it manually (which I'm still trying to access), all to no avail.
I realize this is an Old tablet, and mostly no supported by, well, anything. I am using this as an exercise in familiarizing myself with the Android system before moving on to a more Updated version and device.
I've had some failures and some victories, but I am learning a lot and making progress in leaps and bounds. Although, it seems as though I'm doing it ALL ALONE!! I get no help or even suggestions from anyone on any of the various forums I've visited, and the research is mind-numbingly tedious at best.
Still,.....this problem with the (resistive) touchscreen alignment is my last hurdle with this restoration project, and I could REALLY use some input from someone who is better acquainted with these systems.
Anyone?? Anyone at all???
Hello i have a 16GB chinese tablet that stopped working (boot loop, nothing i tried would help) and have been hunting around everywhere for a compatible firmware to flash. Perhaps in haste, after reading that the Versus TouchTab 10 may be the same product, i tried flashing a full .img ROM that was on softpedia for the Versus but it has not helped. If anything it's only made things worse as now as the red light doesn't turn on at all with the power button. I have also tried a couple of other ROM's for similar tablets with similar specifications but no joy. The tablet does boot into LOADER mode though and i can flash the device without any problems, so it's not completely dead.
Might anyone have a copy of the firmware for this tablet stashed away somewhere? I'd really appreciate it if they might be able to upload it somewhere if they do.
The tablet has no branding but the parameter file i extracted before jumping in an flashing it said CnM-TP-10DC-16-B for the model. So it would seem this is a CnM TouchPad 10 DC 16GB. Hope this is helpful.
Many thanks,
James.
What board version is it? I have a couple of dumped ROMs for this tablet that I might be able to help you with.