Greetings guys!
Today I'm gonna share my VIPER4ANDROID settings for you guys.You can share yours too here in this thread.First of all,you can download the latest version of viper4android,irs,how to install etc on original thread here http://forum.xda-developers.com/showthread.php?t=2191223.All credits go to @zhuhang and all his friends for making such a beautiful app for boosting our music experience.I'm only share settings for our specific devices.
RULES FOR SHARE YOUR SETTINGS
1.Make sure to state your name/type/model of [email protected] etc.
2.ROM that your running.
3.Music player that you use.
4.What settings you share for whether it's for speaker,earphones etc.
5.An appropriate screenshots/post/ etc of your settings for easy and quick refer by other members.
ENJOY!
These are my settings [earphone & headphone](screenshots below)
1.Stock earphones and music player.
2.Running Megafire V8X rom on my GT-I9205.
3.I will upload settings for speaker later.( No for Bluetooth and usb cause I don't use it).You can share if you want.
Hey dear, please tell me the best setting of hi-resolution music... In viper4android.. I m using Nexus5. I have sony earphones xb70ap. Please suggest me for listening hi-resolution seeting in viper4android... Thanks
Resurrection Remix 4.4.2 N7100 Jetaudio and V-Moda Remix Audio earbuds. Can't find a good setting without the bass going crazy. Thanks
Master Power
V4A-FX is powered on
Convolver
Enable
Impulse Response
Dolby Pro Logic II.IRS
Headphone Surround +
Enable
Level 1
Reverberation
Enable
Room Size
25m2
Sound Field
5m
Damping Factor
0 Percent
Wet Signal
0 Percent
Dry Signal
50 Percent
Fidelity Control
Enable ViPER Bass
Select Bass Frequency
60 Hz
Select Bass Boost
6.0 dB
Enable ViPER Clarity
Select Clarity
3.5 dB
Auditory System Protection
Enable
Select Binaural Level
Moderate
There had some time to refine the settings !
cm 13 remix rom mega 5.8 can i use this app sir..??
I have a Note 3 but I'll share anyway
This is for music only, I shut off V4A for movies, dialogue etc. I'm not sure if the Mega has a processor with NEON or not.
Phone: SM-N900A
Headphones: Shure SE215
Music Player: Poweramp 7.03 alpha (note: must sign up for beta program in Play store)
Playback Gain: OFF
FET Compressor: OFF
DDC: OFF (no, I don't use the SE215 entry; it's terrible)
Spectrum Extension: 1.0
Equalizer: OFF
Convolver: BBE Generic Preset 4
Crossover: 10%
Dynamic System: Common Headphones v2
Dynamic Bass: 24%
ViPER Bass: 78 hz; 8.0 dB
ViPER Clarity: XHiFi; 11.0 dB
CureTech+: OFF
AnalogX: OFF
Master Gain: -10.5 dB
Limit Threshhold: 0 dB
These settings probably won't be any good on low quality earbuds. They need all the extra signal processing crap, but too much of that stuff is a hindrance on high quality IEMs.
If anybody here is interested, I have about 750 .irs files I can post a link for y'all to check them out.
Currently using V4A MK-Mod 2.4.0.1(no TWRP)
Equalizer= Vocal Booster
Convolver= Beats Pro+Beats 40%
VHS+= 2
Dynamic System= High End v2 10%
Viper Bass= Natural 78hz at 8db
Viper Clarity= Ozone+ at 8db
Master Gate= 1.6db and 5:5 and 1.0 limit threshold
Currently using some JVC in ear headphones(don't know the model # atm I picked them up for $20 at Walmart not too long ago.
Oh and I'm using PowerAmp 703 alpha through the beta testing part of the play store.
And I'm using a Razr MAXX HD XT926 w/locked bootloader and 4.4.2 Stock Rom 182.46.15
Earphones
Try soundpeats Q12 wireless earphone to enjoy high quality sound.
Q&A for [Read OP First] Official ViPER4Android Audio Profiles
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Profile sugestions
I'm using shure 215's and listen to mostly metal music. Dose anyone have a good profile for clarity using v4a. Thanks for any help.
tpdeville76 said:
I'm using shure 215's and listen to mostly metal music. Dose anyone have a good profile for clarity using v4a. Thanks for any help.
Click to expand...
Click to collapse
You have some options.
1. Try to make one first.
2. Search the thread for the keyword "shure 215".
3. Just keep trying and/or wait for one to be made.
May I recommend trying some of mine in the OP? Good luck.
Note 3
I want to hear music with deep bass and great sound quality, the headset Galaxy Note 3 under the machine.
Viper4Android FX + Walkman + eXstrembeat 2.0
So I have to install as any?
Sorry for bad english.
---------- Post added at 12:53 PM ---------- Previous post was at 12:47 PM ----------
I want to hear music with deep bass and great sound quality, the headset Galaxy Note 3 under the machine.
Viper4Android FX + Walkman + eXstrembeat 2.0
So I have to install as any?
Sorry for bad english.
Here is my profile for headphone. HULK BASS
what not mentioned left disabled.
MASTER POWER: ✔
PLAYBACK CONTROL GAIN: ✔
(ii) Select Effect Strength : Extreme
(iii) Max Gain: 3x
(iv) Max Output: -1.9 dB
FIREQUALIZER: ✔
(ii) Select Preset: Bass Boost
CONVOLVER: ✔
(ii) Impulse Response: Razor Surround ((Z-Edition)) 7.Stereo+100 Bass.irs
(iii) Cross Chanel: 10%
FIELD SURROUND: ✔
(i) Select Field Surround Strength: Level 3
(ii) Select Mid Image Strength: Extreme
HEADPHONE SURROUND +: ✔
(i) Select Effect Quality: Level 2
FIDELITY CONTROL: ✔
(i) Enable ViPER Bass: ✔
Select Bass Mode: Pure Bass+
Select Bass Frequency: 80 Hz
Select Bass Boost: 14.0 dB
(ii) Enable ViPER Clarity: ✔
Select Clarity Mode: Ozone+
Select Clarity: 13.0 dB
AUDITORY SYSTEM PROTECTION: ✔
(i) Select Binaural Level: Extreme
MASTER GATE (Limiter): ✔
(i) Output Gain: 0.8 dB
(ii) Channel Pan: 0.5:0.5
(iii) Limit Threshold: 0 dB
---------- Post added at 02:14 PM ---------- Previous post was at 02:04 PM ----------
what not mentioned left disabled.
MASTER POWER: ✔
PLAYBACK CONTROL GAIN: ✔
(ii) Select Effect Strength : Extreme
(iii) Max Gain: 3x
(iv) Max Output: -1.9 dB
FIREQUALIZER: ✔
(ii) Select Preset: Bass Boost
CONVOLVER: ✔
(ii) Impulse Response: Razor Surround ((Z-Edition)) 7.Stereo+100 Bass.irs
(iii) Cross Chanel: 10%
FIELD SURROUND: ✔
(i) Select Field Surround Strength: Level 3
(ii) Select Mid Image Strength: Extreme
HEADPHONE SURROUND +: ✔
(i) Select Effect Quality: Level 2
FIDELITY CONTROL: ✔
(i) Enable ViPER Bass: ✔
Select Bass Mode: Pure Bass+
Select Bass Frequency: 80 Hz
Select Bass Boost: 14.0 dB
(ii) Enable ViPER Clarity: ✔
Select Clarity Mode: Ozone+
Select Clarity: 13.0 dB
AUDITORY SYSTEM PROTECTION: ✔
(i) Select Binaural Level: Extreme
MASTER GATE (Limiter): ✔
(i) Output Gain: 0.8 dB
(ii) Channel Pan: 0.5:0.5
(iii) Limit Threshold: 0 dB
tpdeville76 said:
I'm using shure 215's and listen to mostly metal music. Dose anyone have a good profile for clarity using v4a. Thanks for any help.
Click to expand...
Click to collapse
http://forum.xda-developers.com/and...x-profiles-t2945969/post56878387#post56878387
help
i got ath-cks55XiS inear what should profile i use?
mucong123 said:
i got ath-cks55XiS inear what should profile i use?
Click to expand...
Click to collapse
You can start off with my original carnage profile in the op and then tweak it from there if you'd like.
hello
I want to hear music with deep bass and great sound quality.
Device used: Sky pantech Vega a870.
Headphones used: Sony MDR xz310
I'm using Viper4Android FX + Walkman + SoundEnhancement
Thank for any help.
Is there a way to make it so that the vocals dont get quieter when the bass comes in?
Rai8er said:
Is there a way to make it so that the vocals dont get quieter when the bass comes in?
Click to expand...
Click to collapse
You will have to lower the amount of bass.
kingofnice said:
You will have to lower the amount of bass.
Click to expand...
Click to collapse
Alright, thanks
eq setting
Hi I've just installed viper4android from play store....
I've also downloaded a .irs file for my ear-set, but unfortunately I'm not happy with the overall sound until now...
Instead I have found an amazing eq setting for poweramp. Can anyone help me to port this wonderful eq setting in viper4android?
You can find it in this link: goo.gl/E73Mzl
Thank you so much!
Hey... Using Lolliviper (viper4android for and. 5.0) on my htc one with maximus hd... now I need a sound profile for drum and bass thats the sound; ) and is there a irs fir house of Marley exodus on ear headphones? Would be nice if someone could help: )
Sent from my HTC One using XDA Free mobile app
hi
Hello guys... I'm using the House of Marley Exodus- Headphones on my HTC One... I'm listening to Drum and Bass mostly... But I can't find my Headphones or a Audio Profile for Viper... Anyone knows ?
hi guys
i've just installed v4a with the super audio quality driver.
I can't manage to find a new profile for the nexus 5 phone speaker. anyone care to share his profile or settings?
Nexus 5 & Tapatalk.
could Viper4android cause a delay in headset button response?
My phone is a Samsung Galaxy S4 Active SGH-I537. When I receive a call while listening to music, there is often a long delay between pressing the headset button and the call being answered. I know the build.prop settings can slow the audio processing, hence the increase battery drain. Could this be caused by Viper?
chris1379 said:
My phone is a Samsung Galaxy S4 Active SGH-I537. When I receive a call while listening to music, there is often a long delay between pressing the headset button and the call being answered. I know the build.prop settings can slow the audio processing, hence the increase battery drain. Could this be caused by Viper?
Click to expand...
Click to collapse
Uninstall the V4A driver and test.
I am trying it now but the results may be inconclusive. I uninstalled, unrooted and restored build.prop to allow an update. I will have to try it for a while and then reinstall Viper to know which change fixed it. So far it's working OK.
This profile, as reposted below, is pure genius....textured, layered, lush. I measure my music experience by the goosebump factor- and with this preset I get plenty!
The arduous journey of medicocre playback and countless failed attempts to remedy has all been worth it for this!
I am going to also load the other version and see where that takes me. Thanks so much!!
BY ahrion
10th October 2013, 05:44 AM | #154
Enhanced Clarity Pure Bass+ 3.0
For a stunning all-in-one (dance, acoustic, rock, metal, alternative, techno, house, hip hop, etc.) and beautifully clear, pure bass, and quality audio experience used with: Headphones/Earpiece/Auxillary
FX:
1. Master Power:
2. Playback Gain Control: ✘
3. FIREqualizer:
-Select Preset: Custom
–[-2.5] [+2.0] [+6.0] [+3.0] [+0.0] [+0.0] [+0.0] [+3.5] [+1.5] [-3.5]
4. Convolver:
-Impulse Response: Dolby Pro Logic II.irs
-Cross Channel: 0
5. Field Surround: ✘
6. Differential Surround: ✘
7. Headphone Surround +: ✘
8. Reverberation: ✘
9. Dynamic System: ✘
10. Fidelity Control:
-Enable ViPER Bass:
–Select Bass Mode: Pure Bass+
–Select Bass Frequency: 80 Hz
–Select Bass Boost: 10.0 dB
-Enable ViPER Clarity:
–Select Clarity Mode: OZone+
–Select Clarity: 12.0 dB
11. Auditory System Protection (Cure Tech+):
-Select Binaural Level: Extreme
12. Master Gate (Limiter)
-Output Gain: 2.9 dB
-Channel Pan: 0.5 : 0.5 dB
-Limit Threshold: -1.0 dB
XHiFi:
1. Master Power:
2. Playback Gain Control: ✘
3. FIREqualizer: ✘
4. Audio Reconstruct:
-Hi Clarity: 70
-Lo Contour: 50
5. Master Gate (Limiter): ✘
So there is no thread like this for the 6p where viper users could share their sound profiles and opinions about the sound enhancements you can achieve with viper4android specifically on the speakers. Here is mine: https://drive.google.com/file/d/0Bx_H00kDXlWPVG5FRDEyX2RLOFU/view?usp=drivesdk
Extract the zip and copy its contents into the viper folder on your sd then load up the profile in the viper app. The profile is called sahne. I tuned it to this piece of video: https://youtu.be/73LNmkL4tfg
Njoy
Sent from my Nexus 6P using Tapatalk
I use these settings I found on reddit
Headphones:
Spectrum Expansion - 0.7
Dynamic System - Common Earphone V2, 30%
Viper Bass - Natural, 66 Hz, 8.0 dB
Phone Speakers:
Speaker Optimization - Enabled
eXtra-Loud - Moderate, 5x Max Gain, -1.9 dB Max Output
Azdian said:
I use these settings I found on reddit
Headphones:
Spectrum Expansion - 0.7
Dynamic System - Common Earphone V2, 30%
Viper Bass - Natural, 66 Hz, 8.0 dB
Phone Speakers:
Speaker Optimization - Enabled
eXtra-Loud - Moderate, 5x Max Gain, -1.9 dB Max Output
Click to expand...
Click to collapse
Try the convolver (irs) i have in my zip and set it to 80%. And use it for the speakers only. And set the highs a bit higher in the eq. Or just take my profile
Sent from my Nexus 6P using Tapatalk
and313 said:
Try the convolver (irs) i have in my zip and set it to 80%. And use it for the speakers only. And set the highs a bit higher in the eq. Or just take my profile
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Didn't go well, I can barely hear the incoming messages notifications :/
What's a spreaker?
Azdian said:
Didn't go well, I can barely hear the incoming messages notifications :/
Click to expand...
Click to collapse
hm either you are doing something wrong or i forgot to resave the profile. Here is the resaved one:
https://drive.google.com/open?id=0Bx_H00kDXlWPeDRPSjRpb3FMOFk
this is what you should be seeing under speaker:
http://imgur.com/a/FDdD9
And also make sure your gate limiter is set right
and a word of advice. if you are not using convolvers (irs samples) you are missing out on the best part of viper.
So I'm sharing with you what I have on my device after hours of searching around and experimenting. I personally like a nice Bass but also clarity in the artists' voice and instruments and these settings bring out the best in both. Thanks to @pavaosk for his thread on the mi8 lite thread (his settings give a lot of noise but I've tweaked it to work best with our device).
Earphones: TFZ Balance 1 IEM
Magisk: 19.3 stable
Viper4android: FX Legacy v4.3 (2.5.0.5)
Files: attached
Steps:
Flash the v4a magisk module through Magisk Manager and follow module instructions, reboot, and open the v4a app.
Use the following settings under the HEADSET tab:
Master power: ON
Playback gain control: OFF
FET compressor: OFF
ViPER-DDC: OFF
Spectrum Extension: OFF
FIREqualizer: ON
Preset: Acoustic
Convolver: ON - important!
Impulse Response: SUPERIOR
(Unzip the attached and place the file 'Superior Bass.irs.wav' into Viper4Android/Kernel using file explorer)
Cross Channel: 16% (if you increase this more than 16% you will lose dual channel playback)
Field Surround: ON
Field surround strength: slight
Mid image strength: Level 5
Differential sound: OFF
Headphone surround +: ON
Level: 1
Reverberation: OFF
Dynamic System: ON
Listening Device: High-end headphone v2
Dynamic Bass: 24%
Tube sound simulator: OFF
Viper Bass: ON
Bass mode: Natural bass
Bass Frequency: 60 Hz
Bass Boost: 6.0 to 10.0 dB
Viper Clarity: ON
Clarity mode: XHIFI
Clarity: 10.0 dB
Master gate:
Channel pan: 0
Output gain: -6.0 dB
Limit threshold: 0 dB
And BOOM! Feel the difference..
Let me know what your settings are if if this helped give you a better listening experience. Tweak these a little to suit your ears and earphone hardware. All credits to the devs and I'm only sharing my settings here.
Feel free to share your own settings in this thread!
Credits :
- @zhuhang (Official Thread)
- @pavaosk (mi8 Thread)
- @osm0sis
- Viper's Audio (Official blog)
- @viper520
- @Team_DeWitt
- @ahrion
There are no best settings when it comes to earphone and headphone experience. Every device has its own characteristics and needs to be configured accordingly. Also, everybody has their own taste.
Thanks anyways, I'll definitely give a shot.
Best settings ?! ROFL ???? wake up kid ?
After trying out a lot of different sound mods and apps and patches I always came back to Viper4Android. Simple to use, great sound quality and a lot of customization.
Steps:
-Extract the attached IRS.zip into Android/data/com.pittvandewitt.viperfx/files/Kernel (For Android 11 follow this tutorial)
-Install latest Viper4Android apk (Download here), open it, grant root access and install the drivers.
-Reboot the device.
IF THE MOD IS NOT WORKING AFTER REBOOT TRY SETTING SELINUX MODE TO PERMISSIVE WITH THIS APP AND/OR INSTALLING AUDIO MODIFICATION LIBRARY MAGISK MODULE
HEADSET
Go to Headset and enable the Master power switch, I suggest you put on your headphones now so you can hear the changes in the sound yourself and tweak them to your liking.
My settings are:
Master power: ON
FIR equalizer (enabled): Preset: Acoustic
Convolver (enabled); Impulse Response: IRS.irs (copy IRS.irs from the rar into Viper4Android/Kernel); Cross Channel: 60%
Dynamic System (enabled); Listening Device: High-end headphone (v2); Dynamic Bass:7%
Viper Bass (enabled); Bass mode: Natural bass; Bass Frequency: 115 Hz; Bass Boost: 3.5 dB
Viper Clarity (enabled); Clarity mode:Natural; Clarity:3.5 dB
Auditory system protection (enabled); On; Binaural level:1
Feel free to share your own settings in this thread!
Credits :
- @zhuhang (Official Thread)
- @osm0sis
- Viper's Audio (Official blog)
- @viper520
- @Team_DeWitt
- @ahrion
Thanks to @sauliiin for his profiles:
"Here I share a lot of profiles and some other stuff for Viper4Android.
Just download, copy it and replace viper4android folder, close and open viper and choose your desired profile. My favorite is "Saulin", that is based on "V4ARISE".
Try and choose the best for you! Peace out!
https://mega.nz/#F!z5UmGaTJ!kWuvdZ7lpJ7Vt0tEsSlR4A"
Any chance of getting this to work on Galaxy fold 3 yet?