Related
I'm not usually one to use a cases on my electronic devices. I like my phones like I like my women, naked with a nice screen protector.
But since the G3 seems to be made of some of the most slippery plastic I've ever held, I dropped it a few feet the other day and slightly nicked the corner of it. So I'm looking for a very simple case, but as I said in the title, I'm picky.
It doesn't need to protect it all that much, but one thing I can't stand is when the case comes up over the edge of the screen. I'll use an example of a case that someone posted on the "Show us your case" thread:
http://forum.xda-developers.com/attachment.php?attachmentid=3337032&d=1432863723
See that slight "rim" around the edge of the bezel? It bothers me, which is why the two cases I've already bought are sitting at home unused. I need it to be flush, or even recessed from the front of the phone.
Does anyone know of a fairly basic case that won't have anything protruding up around the edges of the screen? I'd love one of those official replacement back cases from LG, but they're apparently extremely rare. So other options would be great.
Thanks!
If you dislike cases why not just get a full body clear skin from Skinomi or Bodyguardz? I'd recommend the LG Slim Guard Case. It has a raised lip but is super minimal, almost flush with the screen. This case unlike other thin G3 cases offers full body coverage/protection. LG also has the Slim Hard Case however this case does not offer fully cover the phone. The Ringke Slim is another good case option. It does have a small lip. Check ebay for the OEM cases if you can't find them on Expansys
Hello im Veronica and this is my first post owing this phone and im loving it! i bought a glass protection that come is curve design but it didnt fit well bubbles of air started to appear and i took it off
Have you tried the liquid protection ? i dont know the name of the product but is a liquid you put in the screen and it makes it hard
Please help me what do you use to protect it?
I use the uv Loca glue and glue on the curved tempered glass protectors on mine
Hi veronica. I own now an s8, but my previous phone was a galaxy s7 (the flat one), in which I had a tempered glass protector. But now, with the curved display of miss s8, the tempered glass I've found are not so great. I really don't recommend the liquid protection , that supposed nano tech solution. I've seen it, and its effects are practically none. U can't tell when u you've applied or not.
As the previous post says, the better solution is to take a tempered glass and UV glue between that and the gorilla glass, and dry it in the UV lamp. That way, u get a better protection, but need to try take out the air bubbles that may get in the process before dry.
I'm sorry if my English can't be excellent, because it's not my original language.
Greetings to u.
I also would be interested in mounting a tempered glass screen protector with a liquid adhesive and then drying it with a UV lamp. The end result looks very good, but I wonder if it does affect the screen of the phone. In case that I would like to remove the foil or replace it ... I do not know if the adhesive is "peaceful", if it leaves residual traces or I risk of having to change the touchscreen at the same time with the glass: D
I'd like to buy this: https://bit.ly/2SSQMZT (Aliexpress).
To be honest, the Spigen NeoFlex is the absolute best option in my opinion. I normally do not like these "Self-Healing" type but, it has been amazing, stays on all corners and I can continue to use my very light but very protective Spigen case as well. I normally do not like cases but the one I use is okay, especially since I have already shattered the front and rear of the phone once. Don't want to do it again.
I second this...
frozeninferno said:
To be honest, the Spigen NeoFlex is the absolute best option in my opinion. I normally do not like these "Self-Healing" type but, it has been amazing, stays on all corners and I can continue to use my very light but very protective Spigen case as well. I normally do not like cases but the one I use is okay, especially since I have already shattered the front and rear of the phone once. Don't want to do it again.
Click to expand...
Click to collapse
I've tried about 6 different tempered glass protectors, and all have either made it very difficult to pull down the top menu, or have gotten dust/lint behind the screen. Went to the Spigen NeoFlex 'film' and never looked back. In fact, I just ordered another set of them because I got polyurethane fingerprints on the screen while doing a wood railing. I had zero problems, it doesn't affect touch sensitivity. I will say that getting the sides to stay took a few minutes of work, but once stuck, it has stayed that way for 8 months so far. I paired it with a Spigen LiquidArmor case. I've dropped the phone onto my ceramic floors several times already and had no damage to the phone. I use wireless charging with no problems.
https://www.amazon.de/gp/product/B07NQDGF3H/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Super slim, very nice matte texture, makes it less slippery, feels super nice in hand, and the matte effect works really nice with the colour of the phone's back. I had a thicker, clear TPU case before, and this one is SO much nicer.
Do you use gesture navigation with it? How is it working for you when using the Back gesture from the dge?
I got the following one:
https://www.amazon.ca/gp/product/B07P7N8444/
What annoys me a bit is for the Back gesture I have to apply sufficient pressure to ensure it correctly register as coming from the edge. Not major, but a bit annoying - I get a few of failed detections now and then.
This is the first time I ever felt the need to buy a case/bumper. And it's not even to protect it, but because without one, that 100% glass phone is WAY too slippery for me to feel safe holding it in one hand. My old Nexus 4 was also made of glass, but the sides didn't feel that slippery.
I am using this case and its so good . It doesn't really bothers me when using gestures ! It doesn't make the edges of the screen like using a bumper . And it's cheap !
https://s.click.aliexpress.com/e/cojRujj6
RMerlin said:
Do you use gesture navigation with it? How is it working for you when using the Back gesture from the dge?
I got the following one:
https://www.amazon.ca/gp/product/B07P7N8444/
What annoys me a bit is for the Back gesture I have to apply sufficient pressure to ensure it correctly register as coming from the edge. Not major, but a bit annoying - I get a few of failed detections now and then.
This is the first time I ever felt the need to buy a case/bumper. And it's not even to protect it, but because without one, that 100% glass phone is WAY too slippery for me to feel safe holding it in one hand. My old Nexus 4 was also made of glass, but the sides didn't feel that slippery.
Click to expand...
Click to collapse
I'm not using gestures currently but I doubt the memumi case would interfere. It's considerably slimmer than those TPU cases (I had the same ESR case before, coincidentally) and only touches the edges of the screen ever so slightly. What's more, it doesn't actually stick out above the screen at all. I am also using a glass screen protector, though, so that gives my screen a little extra height as well.
Revengebg said:
I am using this case and its so good . It doesn't really bothers me when using gestures ! It doesn't make the edges of the screen like using a bumper . And it's cheap !
https://s.click.aliexpress.com/e/cojRujj6
Click to expand...
Click to collapse
That looks interesting! Definitely seems like a viable alternative.
I ordered the Aliexpress case since it was really cheap (and I had an extra rebate as a first-time Aliexpress customer).
Will know in 4-5 weeks if it works better than the ESR for gesture handling...
Revengebg said:
I am using this case and its so good . It doesn't really bothers me when using gestures ! It doesn't make the edges of the screen like using a bumper . And it's cheap !
Click to expand...
Click to collapse
Hello, very nice case
One question, the edges are soft silicone? The typical thick silicone? I really like that kind of silicone because I think it's what best protects
Greetings and thanks
quisquilla said:
Hello, very nice case
One question, the edges are soft silicone? The typical thick silicone? I really like that kind of silicone because I think it's what best protects
Greetings and thanks
Click to expand...
Click to collapse
Yes , it's hard silicone but it's a mix of plastic and silicone . It's nice to the touch .
I received the bumper from Ali. While it's slightly more slippery than my previous silicon bumper (but still nowhere as bad as the bare glass case of the phone itself), it's definitely less problematic with side gestures than my original bumper, and it also looks more discrete. Overall a very good purchase, especially at that price.
Are there any ACTUAL bumper only cases? Meaning that it only goes around the edges only and leaves the front/back open? I'm not worried about dropping the phone, I just don't want it to be so slippery. So I want something I can stick on the edge to give me some friction so I can hold it without sliding out of my hand. (With my usual grip, the phone keeps sliding out of my hand.
The bumper should be wide enough so that I can sit it down either way on a table without the camera bump or front screen touching the table.
I'm using the Spigen ultra clear bumper case.
Good fit, looks like good protection, although I havent dropped it yet. There is a lip around the front screen for protection, not too pronounced so just perfect.
Fit and cutout looks spot on.
eng3 said:
Are there any ACTUAL bumper only cases? Meaning that it only goes around the edges only and leaves the front/back open? I'm not worried about dropping the phone, I just don't want it to be so slippery. So I want something I can stick on the edge to give me some friction so I can hold it without sliding out of my hand. (With my usual grip, the phone keeps sliding out of my hand.
The bumper should be wide enough so that I can sit it down either way on a table without the camera bump or front screen touching the table.
Click to expand...
Click to collapse
There probably is. But let's be honest: The Huawei P30 sucks without a proper case. Way to slippery, uneven and really fragile. I couldn't use it without a case, they really ****ed up the design to some extent..
Yes it is very slippery, but that's what the bumper is for, to make it less slippery.
I ended up finding a decent one. The RhinoShield CrashGuard
Whats the best black case for the P30, where the back is completely flush so it sits good and flat on a table?
Thin cover (I wanted this) with rubber inside for thickness. does not dance on the table. I can't attach photos
Roxx Case
Best case I found so far.
https://roxx-case.de/products/roxx-...as-original-nur-besser?variant=27904305594391
I cant find a good case for ROG 3 on flipkart of Amazon. Which case are you guys using? where did you buy it from??
I am using Lighting Armor case as I need to use the air trigger. If you do not care for the function of air triggers (dual & slide), can get IMAK case from aliexpress.
I'm also using the lighting armour , I like it ok it drains power but I still like it
I am using the average tpu case that is available for rog 3, i had to make cut out for the side mounted type c ports though
I'm using this: https://www.aliexpress.com/item/4001345047036.html?spm=a2g0s.9042311.0.0.5d6e4c4d4DwYCq
It's not perfect, but provides enough all around protection, the cutouts are in place.
The included tempered glass screen protector is of good quality, but the black border covers a few pixels on the sides.
It's pretty cheap, I can recommend buying it to protect your ROG Phone 3 - as I said, it's not perfect, but good enough.
Using this one with a tempered glass in the front and a silicon film in the back
I have ordered this IMAK transparent black TPU case with extra corner shock-proofing along with these IMAK clear soft hydrogel films for front & back protection.
Hopefully shipment arriving to me by early next month.
Used to use the lighting armor case until the slippery uncovered aluminium side caused me to drop the phone yesterday, now the phone has a dent on the top right corner of the frame. Lighting armor has the best look of all the cases out there. Now using Zshow case which should prevent it from hitting the screen flat down if I ever drop it again. I'm lucky the phone didn't fall face down with the lighting armor case which would have guaranteed a cracked screen.
I have the imak tpu case too but it cause the tempered glass to lift.
Besides the tempered glass being lifted issue, what's your experience/ feedback regarding your IMAK TPU case (is it with extra corner protection)?
Imak case is quite loose around the air triggers, power button, volume button and side port. Top 4 corner airbags are the problems as they can be depressed quite easily and this cause the screen protector to lift up. You will know when you hold the phone on your right hand with your palm resting with the bottom right corner for support, and this can cause the screen protector to lift.
I'm getting the hydrogel film screen protectors - Hoping that screen lift is not an issue.....
What's your experience or opinion regarding the general damage/ drop protection with this case?
Quality, overall fitting & feel?
It will protect if dropping on the corners as well as face down. However dropping on the back might be a problem because the camera lens are protuting out (although the case cover the camera lens). Placing the phone on the table will also result in wobbly phone when using.
---------- Post added at 06:15 AM ---------- Previous post was at 06:13 AM ----------
Quality, would say it is better than those generic cheap tpu case (which has worse fit than imak), feel wise, it is slippery on the back.
I just received this: Foluu ROG Phone 3 Case through Amazon. £6.71. To hold it without the phone it doesn't feel great and whilst over the standard case it comes with its bulkier I feel so much safer knowing my camera wont get scratched when I put the phone down. It also raises of the front screen by a minuet amount so there is a bump as you move your finger about. I'd rather that than a nasty scratch though so happy with it.
Air trigger holes and extra power connector cut out too as well as on the back a nice design
punchuk said:
I just received this: Foluu ROG Phone 3 Case through Amazon. £6.71. To hold it without the phone it doesn't feel great and whilst over the standard case it comes with its bulkier I feel so much safer knowing my camera wont get scratched when I put the phone down. It also raises of the front screen by a minuet amount so there is a bump as you move your finger about. I'd rather that than a nasty scratch though so happy with it.
Air trigger holes and extra power connector cut out too as well as on the back a nice design
Click to expand...
Click to collapse
It covers the side? The picture on amazon looks like it is an open side design. I don't see slapping that case will provide a good grip.
lornranger said:
Imak case is quite loose around the air triggers, power button, volume button and side port. Top 4 corner airbags are the problems as they can be depressed quite easily and this cause the screen protector to lift up. You will know when you hold the phone on your right hand with your palm resting with the bottom right corner for support, and this can cause the screen protector to lift.
Click to expand...
Click to collapse
Hi mate i suggest to use Asus Antibatteric screen protector It has and awesome response and great oleophobic protection.
Davisk8 said:
Hi mate i suggest to use Asus Antibatteric screen protector It has and awesome response and great oleophobic protection.
Click to expand...
Click to collapse
I am using Asus Original Screen Protector without antibacterial coating. The antibacterial protector is not available in my country. Great protector, no blocking of edge unlike the cheap china protector which has thick black borders and block the edges of the display.
punchuk said:
I just received this: Foluu ROG Phone 3 Case through Amazon. £6.71. To hold it without the phone it doesn't feel great and whilst over the standard case it comes with its bulkier I feel so much safer knowing my camera wont get scratched when I put the phone down. It also raises of the front screen by a minuet amount so there is a bump as you move your finger about. I'd rather that than a nasty scratch though so happy with it.
Air trigger holes and extra power connector cut out too as well as on the back a nice design
Click to expand...
Click to collapse
Thanks for this, I did think about getting this over.
I'm using the magnetic flip case which is great, but no front lip so don't drop the thing like I did, broke my display as the screen protector didn't quite cover all of it and a tiny stone hit the outer edge.
Not the end though as I've bought another, and will get it repaired under insurance consider it a lesson learned.
￡2.32 23%OFF | Safety protective Glass for Asus Rog Phone 3 ZS661KS Oleophobic Screen Protector For ROG Phone 3 Strix Tempered Glass Film
https://a.aliexpress.com/_B0aeTT
This was with the rog case which in all honesty shouldn't come with it.
This is the protector, don't bother with it, I've another coming that has smooth edges, looks decent so will see.
Turns out the one I've ordered might be the same Asus sells.
￡1.59 | For Asus ROG Phone 3 Phone3 ZS661KS / Strix 6.59" 21D 9D Full Glue Cover Toughened Tempered Glass Film Screen Protector Guard
https://a.aliexpress.com/_B0iH9b
the lighting case but I installed a diy wireless charger because I have so many already laying around
[/COLOR]
elmor0 said:
I have ordered this IMAK transparent black TPU case with extra corner shock-proofing along with these IMAK clear soft hydrogel films for front & back protection.
Hopefully shipment arriving to me by early next month.
Click to expand...
Click to collapse
FEEDBACK
Took about 5 weeks to arrive (from China).
This IMAK case is good build quality and fit over all, could have been a bit more snug - the extra corner padding does not make it look slick, and I am not sure if it is worth it on balance.
There is a 2 mm lip all around the front panel to help with screen protection.
Cut-outs are spot on - including for air-triggers/ 3 mics/ heat vent/ side USB ports. No cut-out for SIM-tray though but it's better this way.
Camera module is fairly well protected.
No issues with air-trigger related squeeze gestures.
The Hydrogel clear gel screen protector had a ?extra notch cut-out just left of the front camera (?? why) but otherwise the rest of the dimensions were spot on. It came as a set of x2 in one pack, which was a nice surprise. Included a helpful set of instructions/ link to video.
I preferred it to be short by about 1 mm all around the edges to minimise the risk of "lift" when the case is compressed in pockets/ when using the squeeze gestures etc.
The touch feel is smooth and has a good response. Visibility through this screen film is fine; no glare issues. I prefer these type of gel screen protectors to glass.
Has anyone come across a case that doesn't need to be removed when connecting to the accessories (eg Twinview, Mobile Desktop Dock)?
Hi all,
I have a spigen neoflex TPU protection on my s23 ultra, with a plastic spigen case.
I've bought an official Samsung leather case, and it seems really nice.
But, the neoflex is a bit to short on the sides, so that my finger feels the border of the screen protection every time I swipe left or right.
So, I would like to replace the neoflex with a tempered glass protection.
Do you know one who will fit well?
I have had a really bad experience with an Oppo find X5 pro : I've tested 5 tempered glass brands and every time my beautiful official Kevlar case unglued the tempered glass in the corners...
Thank you for your help
Whitestone dome or Spigen have been the best in my experience.
Avoid amfilm at all costs.
I have domeglass with leather samsung cover. In my opinion everything is fine. Of course glass not cover full screen and is about 1,5 mm smaller than all screen - safe "bumper" for covers.
I have too spigen optic armor and with domeglass is perfect fit, no one gap between case and glass but I seldom use this spigen.
Since S23 Ultra has a curved screen, I dont really think you should get a tempered cause either they dont cover the curved area or if they do, I dont really trust the protection they offer. For Curved Screen, I suggest getting a Screen Protector Film just to be safe. There is a Full-Body Screen Protector from Gadgetshieldz that covers the screen and other parts of the device like the sides, back and camera. Cases dont necessarily help with the scratches cause Ive seen multiple devices getting permanent marks inspite of the cases mostly due to the dust and things. So best to keep everything protected with either a Skin or a Full-Body protector. They also provide Skins if thats what you prefer.
Prakash_Raj said:
Cases dont necessarily help with the scratches cause Ive seen multiple devices getting permanent marks inspite of the cases mostly due to the dust and things
Click to expand...
Click to collapse
Exactly, I saw too. Refers to people who don't pull off case for months to clean
_GRIZZLY_ said:
Exactly, I saw too. Refers to people who don't pull off case for months to clean
Click to expand...
Click to collapse
Yaa I swear. All my previous devices had this issue. Ive used the best of the best cases and they still have these tiny scuffs which are permanent. This reduced the resale value of my devices and thats when I opted for this Full-Body Coverage cause I really dont mind spending a bit more to avoid these permanent damages. Im thinking of getting it wrapped with Skins next time.
So I am happy with still good stick fabric foil around frame .
Sometimes better use only minimalistic covers, not too bulky and happy with device than see scratches or crack after more time with angry tell "what was it for all this protections"
_GRIZZLY_ said:
So I am happy with still good stick fabric foil around frame .
Sometimes better use only minimalistic covers, not too bulky and happy with device than see scratches or crack after more time with angry tell "what was it for all this protections"
Click to expand...
Click to collapse
Both screen protectors and skins they provide barely adds any bulk. they are literally as thick as a sheet of paper and I dont think you can go any thinner