I have a ze554kl (630 variant), by mistake, I flashed it with boot loader files of 660 variant so the phone has been bricked.
I correct this by flashing the right firmware via QFIL flash but this firmware erase my 2 imei data and I lost network.
There is no printed IMEI on the back cover, neither inside the phonee after opening it. So, I writed 2 default IMEI (right calculation with 35811108xxxxxxx) but with no success, the phone found the network but can't be registred on it.
What I can do for it?
Thanks!
Same situation.
Related
Hello! I was having issues with my SGII since I lost my IMEI and I struggled to recover it You can check my story here.
Now I have mi IMEI but my phone is network locked. I tried to unlock it with Galaxy S Unlock but it didn't work.
Tried with GalaxSIM and after reboot it says is unlocked BUT my IMEI is lost and obviously my phone doesn't recognizes my SIM card.
I'm on Android 4.1.2
Build Number:JZ054K.I9100XWLSE
Kernel:3.0.31-Siyah-s2-v6.0b4
Baseband: I9100XXLS8
If my EFS folder is corrupted shouldn't I lost my IMEI?
Why I lose my IMEI after attempting to network unlock my phone?
Here are some images.
First everything is normal, I have my IMEI and stuff...
Unblock successful!!!
But after reboot, my IMEI is lost
And so my signal...
Thank you!
opticon107 said:
Hello! I was having issues with my SGII since I lost my IMEI and I struggled to recover it You can check my story here.
Now I have mi IMEI but my phone is network locked. I tried to unlock it with Galaxy S Unlock but it didn't work.
Tried with GalaxSIM and after reboot it says is unlocked BUT my IMEI is lost and obviously my phone doesn't recognizes my SIM card.
I'm on Android 4.1.2
Build Number:JZ054K.I9100XWLSE
Kernel:3.0.31-Siyah-s2-v6.0b4
Baseband: I9100XXLS8
If my EFS folder is corrupted shouldn't I lost my IMEI?
Why I lose my IMEI after attempting to network unlock my phone?
Here are some images.
First everything is normal, I have my IMEI and stuff...
Unblock successful!!!
But after reboot, my IMEI is lost
And so my signal...
Thank you!
Click to expand...
Click to collapse
i reckon you have a corrupt efs file. What i would suggest is for you to revert back to stock firmware,make sure to set the binary counter to 0 and take it to a samsung service station,may be the guys out there might me off some help to you
K0wneD said:
i reckon you have a corrupt efs file. What i would suggest is for you to revert back to stock firmware,make sure to set the binary counter to 0 and take it to a samsung service station,may be the guys out there might me off some help to you
Click to expand...
Click to collapse
I don't have warranty anymore.
I'm currently traveling ( in other continent for 3 months ).
I don't have my ticket purchase with me.
To trigger this IMEI problem I have to attempt to unlock the phone... so I need to root, reset the binary counter, and then re-flash the original firm, after that binary counter won't be zero.
Hi guys....
I'm with a big problem (or huge problem, ou gigantic problem)...Have a Honor 10 (COL-L29) with variant C636 (Asia Pacific) and region hw/spcseas. I tried flash a some images in device, and not make a backup from my exists oeminfo (yes, i'm stupid and noob user). I make flash a oeminfo from board software (my bootlogo now appears Huawei Ascend), and results: not have serial number (appears 0123456789ABCDEF), no region (appears unknown region), no imei (appears 0000000000000), NOTHING!!!! My bootloader is locked (i try entry in special fastboot mode by testpoint) and shows unlocked, but after reboot, lock again...
Please, help me!!! I'm searching for all internet (I wanna just recover my IMEIs and Serial Number). Device starts normally, but without informations mentioned above.
Only - change motherboard
rambik33 said:
Only - change motherboard
Click to expand...
Click to collapse
I'm thinking a change my device...but is not the intention now...
So, i see in internet (correct me if i was wrong), what a oeminfo file does have the imei information. See too in same applications (dc-unlocker/sigmakey) you can write your imei, HCU too (all applications paid).
My question is: IS there a possibility to insert a IMEI (MEID/SN) in oeminfo file (because i know is binary file)
Attached a file from my device in about device
One more time, i say thank you for all help.....
darks0ldier said:
I'm thinking a change my device...but is not the intention now...
So, i see in internet (correct me if i was wrong), what a oeminfo file does have the imei information. See too in same applications (dc-unlocker/sigmakey) you can write your imei, HCU too (all applications paid).
My question is: IS there a possibility to insert a IMEI (MEID/SN) in oeminfo file (because i know is binary file)
Attached a file from my device in about device
One more time, i say thank you for all help.....
Click to expand...
Click to collapse
On Kirin 970/980 IMEI in oeminfo
I know people what lost imei and cant do anything
I made fix a system in my device, now appears the settings (Processor, RAM correctly and storage). But the IMEI still 0000000000, SN 1234567890ABCDEF and no MEID.
And the grand finale.....appears a NCK Unlock in my display.....
Strange, no??
darks0ldier said:
I made fix a system in my device, now appears the settings (Processor, RAM correctly and storage). But the IMEI still 0000000000, SN 1234567890ABCDEF and no MEID.
And the grand finale.....appears a NCK Unlock in my display.....
Strange, no??
Click to expand...
Click to collapse
I have same problem with my col-l29 phone i don't have any backup. my problem is when is bootloader lock after unlock with mrt dongle i try flash its orignal version with its give error after flash show logo and off. when i try to power on only logo and off.
how you fix please help me.
Hi,
I own Lenovo K9 Note having model number L38012. I know there are many threads like no IMEI, no signal, etc, etc, etc but none of them proved to be helpful. Moreover, I googled everywhere about the problem but I got nothing. The device I own seems to be very new. So, I need help.
The problem is that when I reset my device, it became FRP locked(in starting I didn't understand what was that since I'm a newbie). I flashed stock ROM but nothing happened. THEN I ERASED ENTIRE FLASH FROM PARTITION MANAGER IN QFIL TOOL . My phone became hard bricked but somehow I recovered from it and also now I can use my phone like before but the problem arose that I ended up with no IMEI, NO SIM CARD I somehow restored IMEI by using the QCN file of another device (Mi A1) since I didn't find the QCN of mines on google as mines is a very new device. I used the IMEI Rebuilder tool and edited the IMEI code from the downloaded QCN with my device's IMEI. In this way, I got my IMEI back but NO SIM CARD DETECTED AND WHEN DETECTED AFTER REBOOT, IT SAYS NO SIGNAL FOR BOTH SIM CARDS. ALSO, ACCELEROMETER STOPPED WORKING I tried several methods like:
1. fastboot erase modem (and modemst1, modemst2, fsg, cache, userdata, PERSIST)
2. flashed others PERSIST.img file found on different threads
Somehow recovered sensors like proximity, light and compass by flashing any persist.img but still NO SIGNAL, ACCELEROMETER NOT WORKING BUT SHOWING IMEI after dialing *#06#
ALSO, I DON'T HAVE BACKUPS OF SUCH CRITICAL PARTITIONS. I know I did a BIG MISTAKE.
So please can somebody provide me a solution ( or provide qcn dummy for Lenovo k9 note if someone owns such stupid device Also someone can provide me the PERSIST.IMG OR OTHER important partitions of the said device).
The stock firmware doesn't include these critical partitions.
My device specs:
Model: Lenovo K9 Note (L38012)
SoC: Qualcomm Snapdragon 450(SDM450)
Processor: Octa-core CORTEX ARM A53 @ 1.6 GHz
RAM: 4 GB
Please help if possible as I am afraid and I urgently need the phone. Any HELP WILL BE GREATLY APPRECIATED. Thanks In Advance...
Thanks
I somehow recovered the accelerometer by flashing persist.img found on the link https://forum.xda-developers.com/redmi-note-3/how-to/fixed-gyroscope-accelerometer-magnetic-t3522745
Now, the problem is when I insert the sim card, there is no network though IMEI is showing in *#06#
After dialing *#*#4636#*#* and heading to phone information, the radio state is showing OFF and signal strength = 0 in both sim cards.
In fastboot mode, bootloader version and baseband version are showing unknown while in settings baseband version is showing some string.
Thanks
Please someone reply soon
Hello.
I couldnt make call forwarding to work, so i thought it was modem.
I flashed modem and fsg and now there is no signal, no sim, no imei, only baseband.
I installed custom rom and i got sim and signal, but still no imei.
I flashed efs backuped imei qcn file, still no result.
Now i reflashed original miui with miflash tool there is no sim, no signal, no imei only baseband.
What should i do, is my phone hard bricked? I cant use imei changer either because this phone is old and i already threw out the box that got imei numbers on it.
Update:
I can forward calls even if phone says there is no sim or network, but i cant use data, or call from the phone.
There were guides on miui forum but they closed it. I still hate xiaomi for closing forums.
So i sucessfully rooted this device maybe 2 weeks ago... however bricked it trying to modify build.prop ( i still dont know how to mount system rw on this device)
so when i didnt have the firmware backed up i kind of was stuck so i ordered a junk phone off ebay same model but imei was blacklisted i did a full backup of the firmware and was able to unbrick my original device.. however the problem i face now is that it also copied the IMEI number from the ebay one onto this one.... ive tried numerous imei changer apps , tried clearing nvram nvdata, all that stuff but still it has the imei from the ebay device..... Im not asking how to change imei number persay because i know that is frowned upon and iilegal in some countries... but is there any way to restore the devices actual imei??? its a MT6833 ( mediatek dimensity 700 5g k6833) TCL t767w (30 XE 5g)
do i need to erase all paritions before flashing to get my imei number back? where did i go wrong? when flashing the ebay phones firmware should I not have flashed a certin partition pertaining to the imei ?
any insight or suggestions i thank you in advance
I can't help you with your question, but if you don't mind how did you root the phone? I'm trying to do this myself with no luck. My phone doesn't boot in bootloader or fastboot. It used too when I first bought it but after ota update it went away
with correct drivers installed (mediatek) you can use mtkclient gui or mtk meta tool... basically have your phone turned off have the program running on computer and plug your phone into the pc and it should automatically detect it or you can hold down all the buttons and mtk client gui should pick it up, load it up, from there can unlock bootloader and , backup firmware, flash firmware and so on