Hi
On the S7 Edge you have the option for AOD and night clock. I have looked, according to me, everywhere for night clock, but can't find it. Has it been removed or can someone tell me where to go to setup night clock?
sorry to say its been removed since the s8.
That's crap....it's one feature I used on the S7 edge, having aod constantly on chows the battery...perhaps an apk of the night clock feature?
termdj said:
That's crap....it's one feature I used on the S7 edge, having aod constantly on chows the battery...perhaps an apk of the night clock feature?
Click to expand...
Click to collapse
they do have some thing that resembles it called edge clock which you can set at night, it shows only at the edge but its quite useless. I just ended up leaving AOD on only at night didnt see that much drain, my phone is in airplane mode though.
I was to believe that AOD only used 1% battery per day?
The edge clock is the thing that is missing or that I cant locate..I can't find it under edge panels or anywhere...the clock that sits on the side of the edge screen. The aod took 2 % per hour on my s7 edge..on the s9+ it takes 3% per hour
I just got my new phone today and noticed this was gone as well -- this sucks!!! It was great to glance at my bedside table and see the time in the dark. Crapola.
termdj said:
That's crap....it's one feature I used on the S7 edge, having aod constantly on chows the battery...perhaps an apk of the night clock feature?
Click to expand...
Click to collapse
You can setup a schedule for the aod so it only comes on when you need it.
Sent from my SM-G965U using Tapatalk
---------- Post added at 08:20 PM ---------- Previous post was at 08:19 PM ----------
Lembo said:
I was to believe that AOD only used 1% battery per day?
Click to expand...
Click to collapse
I could be wrong but I'm pretty sure it's 1% per hour.
Sent from my SM-G965U using Tapatalk
vw65bus said:
You can setup a schedule for the aod so it only comes on when you need it.
Sent from my SM-G965U using Tapatalk
---------- Post added at 08:20 PM ---------- Previous post was at 08:19 PM ----------
I could be wrong but I'm pretty sure it's 1% per hour.
Sent from my SM-G965U using Tapatalk
Click to expand...
Click to collapse
Yes its 1%/hr not per day. I have tested it overnight with and without and its 1% drain per hour
They put in into AOD as style....View attachment 4448931
Gesendet von meinem SM-G965F mit Tapatalk
inteks said:
They put in into AOD as style....View attachment 4448931
Gesendet von meinem SM-G965F mit Tapatalk
Click to expand...
Click to collapse
Yeah, but when I select this, it will show during day also :/ Useless..
Agree - also it's not at the edge (not into the curve) - so doesn't show as well from an angle...I miss this feature from the S7 edge..
ForbEx said:
Yeah, but when I select this, it will show during day also :/ Useless..
Click to expand...
Click to collapse
You can control the times when AOD displays.
meyerweb said:
You can control the times when AOD displays.
Click to expand...
Click to collapse
Yeah but not for night clock.. during night will be screen off..
ForbEx said:
Yeah but not for night clock.. during night will be screen off..
Click to expand...
Click to collapse
You can set a time for it to be on anytime. Even at night. View attachment 4457742
Sent from my SM-G960U using Tapatalk
The point that the fan of the S7 Edge approach is trying to make is that he can not set the phone up to switch between two *different* always on setups automatically in a rotation on the S9.
As an example, on the S7 Edge, one could set:
-Always on display with clock and date displayed in large letters on the center of the screen as 8am to 11pm.
- Night clock with the date and time sideways on the edge of the phone and nothing in the center from 11pm to 8am.
Though they've folded the night clock look into the always on display feature, so you can get an always on display that looks like the old night clock, the OP can't duplicate the aspect of the functionality that allowed a more typical AOD during the day and the side one during the night without manually going into settings and changing it both when he wakes up in the morning and again when he goes to sleep in the evening (Twice a day). Now he must pick one or the other and any swaps have to be manual where before he could automate. He can limit the one he picks to certain times, and automate that, but he'll get a blank the rest of the day. So, duplicating getting two that switch back and forth automatically at certain times, which is goal, appears impossible.
I actually don't have an S9, but I do have an S7 Edge. I actually found this thread through a search engine where I was wondering if night mode would still be an option in the event I upgrade at some point, so I get exactly where the OP is coming from, and the functionality described here is not the full functionality of the S7 Edge night mode feature. It sounds like they folded part of it into always on display and eliminated the rest.
An "always on display" automated switcher might be a good app for someone to write. You could have the functionality this guy wants, plus it would enable you to do things like have one AOD for work and another for leisure or family hours. You could look at your phone and come to associate one AOD display with work and one with fun. Maybe your work one could be a serious plain clock face and your fun time one could include a zany picture.
I could be incorrect but I was under the impression that the S9/9+ brought back the NightClock*feature? Not the AOD version but the original?
Anyhow, I was able to unlock the original NightClock feature (S7E, VZW, Oreo 8.0) via a simple floating_feature.xml edit. Now I can go to: SETTINGS -> DISPLAY -> NIGHTCLOCK and can set what time I want the clock to turn on/off. Just like the original.
But, sadly, at the set time, nothing happens. AOD turns off, no NightClock.
The problem that I am facing now is that apparently the framework needs to be edited to actually get the clock to display. Until we get the ability to modify Oreo framework this is likely the end of the road for NightClock.
inteks said:
They put in into AOD as style....View attachment 4448931
Gesendet von meinem SM-G965F mit Tapatalk
Click to expand...
Click to collapse
Thankx!!!
charmcitycrab said:
The point that the fan of the S7 Edge approach is trying to make is that he can not set the phone up to switch between two *different* always on setups automatically in a rotation on the S9.
As an example, on the S7 Edge, one could set:
-Always on display with clock and date displayed in large letters on the center of the screen as 8am to 11pm.
- Night clock with the date and time sideways on the edge of the phone and nothing in the center from 11pm to 8am...
Click to expand...
Click to collapse
Exactly. It was an really nice feature on the S7 edge.
I really liked being able to use the regular AOD clocks during the day and the edge clock during the night. Seemingly many other S7e users liked this feature too. Shame when an new "improved" model loses a desirable feature.
I have an S7+ and just updated it to the latest Oreo release, which includes the latest Samsung updates. I've lost my night clock!! It's the best feature of the edge display, one I use all the time. I'm gutted I upgraded now!! Why Samsung? Why??? Btw, the edge clock in this latest update simply doesn't sit within the curve so it's useless!
Related
Last night I was showing my friend the new phone and when flipping it over in my hand repeatedly I managed to make the edge show a clock - like the night clock but I've not got night clock enabled.... I managed to do it randomly 3 times but cannot work out how I did this.... It would be a really good feature to be able to brush the edge or screen and it just show a clock and also useful if this had a meeting mode. Using the edge clock only for night seems like building a car and only driving in reverse....
Any one worked this out?
jamfitz86 said:
Last night I was showing my friend the new phone and when flipping it over in my hand repeatedly I managed to make the edge show a clock - like the night clock but I've not got night clock enabled.... I managed to do it randomly 3 times but cannot work out how I did this.... It would be a really good feature to be able to brush the edge or screen and it just show a clock and also useful if this had a meeting mode. Using the edge clock only for night seems like building a car and only driving in reverse....
Any one worked this out?
Click to expand...
Click to collapse
That's actually one of the features of the Edge called Information Stream. Just rub the edge up-down or down-up to show the clock and by swiping to the left or right you can change between clock and informations. You can enable and disable it via the edge screens settings.
More here: https://www.youtube.com/watch?v=fa2GZKoPU2I
Ah-ha! Why doesn't it tell you this in the information about the information stream? It only talks about feeds ect.. but no mention of a clock! Thanks very much, really useful that. Just need a desk clock mode now
Sent from my SM-G925V using XDA Free mobile app
Hi
I have several questions :
1. I already experienced that the night clock doesn't appear instantly when you put the watch onto the charger. Sometimes it takes a time till it appears.
2. What about screen burn from the night clock? I read about it in the forum for the first gen moto 360. Is it still a issue with the 2nd Gen 360?
3. There are wear developer options in the developer options. And there is the option "burn-in protection" (I hope it's called that way in English, I've got it on German) but it won't activate even after reboot as it tells me to do.
XxM4tzexX said:
Hi
I have several questions :
1. I already experienced that the night clock doesn't appear instantly when you put the watch onto the charger. Sometimes it takes a time till it appears.
2. What about screen burn from the night clock? I read about it in the forum for the first gen moto 360. Is it still a issue with the 2nd Gen 360?
3. There are wear developer options in the developer options. And there is the option "burn-in protection" (I hope it's called that way in English, I've got it on German) but it won't activate even after reboot as it tells me to do.
Click to expand...
Click to collapse
I disable the night clock by turning on theater mode (double click the side button). But I do this because it seems to fix the heart rate monitor from tracking the apparent 100BPM of the charger lol.
I use the Slumber app that automatically turns the screen off as soon as you place the watch on the charger.
I don't think there will be any burn in issue, since Moto360v2 have LCD screen. Burn-in have place on OLED screens only (Huawei Watch for example) since they have organic diods which degrade over time. LCD don't have this issue at all because they have one backlit light for all pixels and 'rotating' pixels. With LCD screens nothing is affected by the picture on the screen (technically). With OLED screens each pixel emits light on its own, therefore degradation of pixels is dependant on the picture on the screen (whether this particular pixel emits the light most time or not) = burn in.
Therefore night mode on Moto360 can be used safely for as long as you wish.
morpheusgt said:
I use the Slumber app that automatically turns the screen off as soon as you place the watch on the charger.
Click to expand...
Click to collapse
Hola
I tried this slumber app but it did not turn my screen off during charging. Yes, I did launch the app from the watch and ensured that it was enabled.
Am I missing something?
Thanks.
"So what you want me to do 'bout that?"
QAM said:
Hola
I tried this slumber app but it did not turn my screen off during charging. Yes, I did launch the app from the watch and ensured that it was enabled.
Am I missing something?
Thanks.
"So what you want me to do 'bout that?"
Click to expand...
Click to collapse
The button to enable/disable Slumber wasn't very intuitive to me. I actually disabled it when I wanted to enable it, so you may have the same problem. Try toggling the setting the other way around.
also, incase anyone noticed, slumber only puts a black overlay on top of the clock. the screen is still lit up at night, but it's black. incredibly stupid on Motorola to not let us shut off the screen.
Sent from my Moto X Pure Edition
Yes there is a problem and a big one... my watch with less than 5 months old are all burned now
Stupid setting just kill the watch
shaneledford said:
I disable the night clock by turning on theater mode (double click the side button). But I do this because it seems to fix the heart rate monitor from tracking the apparent 100BPM of the charger lol.
Click to expand...
Click to collapse
That's the answer. Why is anyone doing anything else?
Sent from my Nexus 5X using XDA-Developers mobile app
bobby janow said:
That's the answer. Why is anyone doing anything else?
Sent from my Nexus 5X using XDA-Developers mobile app
Click to expand...
Click to collapse
Because this no longer works since one of the updates
shaneledford said:
Because this no longer works since one of the updates
Click to expand...
Click to collapse
The most recent updates fixed it. I use it every night.
Kinsman-UK said:
The most recent updates fixed it. I use it every night.
Click to expand...
Click to collapse
Correct. It was the one before the last one. Every night here too.
Sent from my Nexus 5X using XDA-Developers mobile app
I put my watch in Theater mode (swipe down from the top, then swipe left) and the face stays off until I remove the watch from the charger and press the button to wake it.
New Security patch is dated 01.12.2018.
Battery is also tweaked, it is only possible to choose graphical or percentage within the battery itself. Adaptive battery is there, maybe it was not new but I haven't seen it before.
Also, now we have several new option to choose inside multitasking window...
And Gcam fully working too!
aittamattia said:
And Gcam fully working too!
Click to expand...
Click to collapse
Which version please? No stuttering and night sight problems?
I can't tell you about night sight since it's midday over here.... but I can take photo with that, too. No stuttering, everything seems to be working fine! I've installed this one.
Any first impression about the battery ? And wat about the status bar not in line with the notch ? Any fix ?
It is too early to say something about battery.
ismuta said:
It is too early to say something about battery.
Click to expand...
Click to collapse
Meh, standby drain is something you can see easly if you have an app to monitor the battery .
What about the buggy status/bar + notch instead ?
Yes, there is still a battery in the device. It seems that the new version doubled the capacity. 10.1 -> 10.2. And there will be an XIAOMI coffee pot which can be connected to the USB-port. Just download the MIUI V10 coffee brewer app from fuggbatterydiscussions.com. :silly:
Ozozuz said:
Meh, standby drain is something you can see easly if you have an app to monitor the battery .
What about the buggy status/bar + notch instead ?
Click to expand...
Click to collapse
Yes, I lost 10% in less than one hour...
Ozozuz said:
Any first impression about the battery ? And wat about the status bar not in line with the notch ? Any fix ?
Click to expand...
Click to collapse
No changes considering notch and status bar...
Yes no change in notch and status bar alignment. On miii forum they day is solved but isnt
---------- Post added at 01:49 PM ---------- Previous post was at 01:28 PM ----------
Always on work too. All notification. Question the clock Will move only every time i shut down the screen?
pujolsk said:
Which version please? No stuttering and night sight problems?
Click to expand...
Click to collapse
Doesnt matter, its just working now. Yes, night sight too (its amazing).
Is there a link to the fastboot version?
galakty said:
Doesnt matter, its just working now. Yes, night sight too (its amazing).
Click to expand...
Click to collapse
Yes it is working. I am also happy with it.
Today I got the new update, new version of Gcam, and my new case just arrived
drak_19 said:
Is there a link to the fastboot version?
Click to expand...
Click to collapse
Not that I know...
I can confirm notifications are now working in AOD, not all apps notifications are being displayed though. WhatsApp, GMail, Messenger ok, MS Teams and Outlook are not. Also the notifications appear but if you unlock and lock the screen without viewing the notifications they no longer show. Don't seem to be persistent like on the Samsung AOD. Maybe something to do with the notification/clock process which also only occurs once at screen unlock.
Auto-brightness is still shocking (I'm using Velis) and again AOD always turns off in low (no) light, making it very much not 'always on'. Full-screen mode seems to be working better, with animations following gestures being far less laggy.
broster19 said:
Auto-brightness is still shocking (I'm using Velis) and again AOD always turns off in low (no) light, making it very much not 'always on'. Full-screen mode seems to be working better, with animations following gestures being far less laggy.
Click to expand...
Click to collapse
I find auto brightness now is working perfectly in 10.2.1.
It auto adjust within my desired range, instead of the preset range.
hkwildboy said:
I find auto brightness now is working perfectly in 10.2.1.
It auto adjust within my desired range, instead of the preset range.
Click to expand...
Click to collapse
Yes much better now
kekkojoker90 said:
Yes much better now
Click to expand...
Click to collapse
Cool, I'll give it another go. Maybe I was being impatient.
Anyone noticed microlagging especially in Google Chrome after update?
Scrolling is just not really fluid anymore.
Hey everyone!
I'm here to announce the release of a new Android app developed by me and my partner under the company "Symetium Corporation."
REMOVED
The app is basically just a list of things we would really want to be able to put around the camera cutout. It's extremely customizable and has endless combinations of setups. For example, you can enable a setting called 'Always Show Ring' which lets you have a solid color, dynamic color (based on the current app), or a few different types of gradients. In addition to that, you can run a rotation animation on it. Finally, you can also set up different indicators such as a notification indicator, an audio visualizer, a charging indicator, a low battery indicator, a critical battery indicator, and a device overheat indicator. Another notable effect is that you can add a glow effect to spice up the ring's appearance.
The app isn't free because we need to make back some of the development costs as well as fund our exciting upcoming projects, HOWEVER, you get 1 free hour of use and can watch short video advertisements in exchange for additional hours of time using the app. If you can't afford to purchase the app, we understand but would still love it if you would take a moment and try the app for an hour or two!
Compatible Devices
- Galaxy S10+
- Galaxy S10
- Galaxy S10e
Download
The app can be found on the Google Play Store here:
REMOVED
If you have an S10, S10+ or S10e, we'd love for you take a bit of time and try it out. Feedback is extremely crucial to us at this stage of development so we'd love to hear back from you! Thanks for your time!
Update:
Announcing support for the Galaxy S10e!
Thank you so much to everyone who contributed to this new update. We really appreciate your help!
nice but it's out of position.
Bug
Position of ring out of hole Please update this in newer version.
[No message]
So before anyone asks, what are the advantages over Chainfire's implementation ?
Does it work screen off ?
EDIT : This is not aligned with the camera hole on my SM-G9730.
Paradoxxx said:
So before anyone asks, what are the advantages over Chainfire's implementation ?
Does it work screen off ?
Click to expand...
Click to collapse
it does seem to work screen off as I can see the ring when AOD is enabled, but it's out of position, it's not around the camera cut out.
[email protected] said:
it does seem to work screen off as I can see the ring when AOD is enabled, but it's out of position, it's not around the camera cut out.
Click to expand...
Click to collapse
Yeah got the same. Does it work with screen off completely tho ?
Paradoxxx said:
Yeah got the same. Does it work with screen off completely tho ?
Click to expand...
Click to collapse
no guess not as I turned off AOD it would not appear until I touch the screen for the fingerprint to appear.
Hey everyone thanks for the feedback! I just released an update to fix the positioning issue. Apparently, I was using the wrong method for device detection. Basically, you were all seeing what I see when I test rather than what you SHOULD have seen using an S10/S10+. Apologies for the confusion! The update should rollout within the next few hours.
Paradoxxx said:
So before anyone asks, what are the advantages over Chainfire's implementation ?
Does it work screen off ?
EDIT : This is not aligned with the camera hole on my SM-G9730.
Click to expand...
Click to collapse
It works as long as you have Always-On display enabled. Our goal eventually is to make it work regardless of whether or not AOD is enabled.
epicality said:
It works as long as you have Always-On display enabled. Our goal eventually is to make it work regardless of whether or not AOD is enabled.
Click to expand...
Click to collapse
When you achieve that goal i will buy the app for sure...
@epicality, Hmm, Where's the setting for the s10+? I'm getting half cut-off circle, it seemed to be for the s10 model?
Also now I got this error message, please see attached.
i got a very big cutout in s10+
@epicality
its still out of position with latest update, it's get little better when using WQHD+ resolution, but using FHD+ makes it worse.
Hi do you still have issues with alignment or detection im getting emails from people about it still apologies for this but neither he or I own a s10 or s10+ to test on
I am the client who designed the app
epicality said:
It works as long as you have Always-On display enabled. Our goal eventually is to make it work regardless of whether or not AOD is enabled.
Click to expand...
Click to collapse
Thanks for your development!
I currently purchased your program and hope for further upgrades.
Bugs I found:
1. The program cannot correctly recognize the phone model (Hong Kong S10 SM-G9730), see attached screenshot.
2. The position of the ring coincides with the position of the camera.
If you're having issues with the app recognizing your device, please download the app "Phone Device Info" by "sadens studio" and send a screenshot of the first section like so:
epicality said:
If you're having issues with the app recognizing your device, please download the app "Phone Device Info" by "sadens studio" and send a screenshot of the first section like so:
Click to expand...
Click to collapse
That's my screen (Hong Kong S10)
I have s10+ and it shows indicator for s10. Photo attached
Hi all,
i used this https://github.com/Domi04151309/AlwaysOn AllwaysOn app i like it! and i decide to mod a few things to work better with our OnePlus 8 Pro.
needless to say. BIG Thx to Domi04151309 for his work.
changes:
- Fingerprint on AllwaysOn. longpress and keep the Finger on screen until its unlocked
- doublepress takes you to lockscreen
- Mediainfo on Lockscreen (doubleclick for play/pause; longpress next track)
- Notificationicons are colored
based on his version 3.7 and keep in mind earlybeta
have fun
inteks
yesterday i was happy by the low batteryusage of alwayson. then i started "wizards unite" and just locked the screen. in 20min i got 4% battery lost BUT this was counted as batteryusage of alwayson !!!
it seems while alwayson is running and its the "app" in foreground. EVERTHING that runs and use battery in background is counted as batterusage of alwayson !!!
so pls dont trust the usage in batteryinfo....
ps: does NOT work together with apps like aodNotify or arc Lightning....
ps: version 2 .... found a few bug if installing first time. now it should work
sourcecode: https://github.com/int3ks/AlwaysOn/
update version beta 0.3: changelog -> https://forum.xda-developers.com/showpost.php?p=82779667&postcount=14
updated to version 0.5 (still beta) changelog -> https://forum.xda-developers.com/showpost.php?p=82794149&postcount=24
updated to 0.7 changelog -> https://forum.xda-developers.com/showpost.php?p=82811659&postcount=33
updated to 0.8 changelog -> https://forum.xda-developers.com/showpost.php?p=82822155&postcount=41
update 0.9 changelog -> https://forum.xda-developers.com/showpost.php?p=82887131&postcount=47
update 9.1:
-fixed the doubletap powerbutton start camera bug
Will this work with the Energy Ring App?
Gesendet von meinem IN2023 mit Tapatalk
Fails to install on OOS 10.5.8 EU.
Edit V2: works perfectly, wish there was an option to disable FP icon, also the position of icon is a bit off.
MarcoG: said:
Will this work with the Energy Ring App?
Gesendet von meinem IN2023 mit Tapatalk
Click to expand...
Click to collapse
pls test. but i dont think...
areyouanand said:
Fails to install on OOS 10.5.8 EU.
Click to expand...
Click to collapse
i had posted the unsigned debugapk... pls try download again.
version 2 .... found a few bug if installing first time. now it should work
I have to root the op and install riru or something? Can you make a easy guide for everyone? Thanks ?
vuoshino said:
I have to root the op and install riru or something? Can you make a easy guide for everyone? Thanks [emoji172]
Click to expand...
Click to collapse
I believe it's a magisk module
Sent from my IN2025 using Tapatalk
---------- Post added at 02:29 PM ---------- Previous post was at 02:28 PM ----------
Does the fingerprint icon remain on the screen always?
Sent from my IN2025 using Tapatalk
czerdrill said:
I believe it's a magisk module
Sent from my IN2025 using Tapatalk
---------- Post added at 02:29 PM ---------- Previous post was at 02:28 PM ----------
Does the fingerprint icon remain on the screen always?
Sent from my IN2025 using Tapatalk
Click to expand...
Click to collapse
just install. its an apk. but yes its better with root.
the fingerprint remains... to know where to press and hold
Gesendet von meinem IN2023 mit Tapatalk
I tried and works without root. The stuff on the screen moves sometime or not? Because if are fixed i think the burn in is easy.
Edit: i saw that there is an option to prevent it but the finger doesnt move. There is a option to unable it?
vuoshino said:
I tried and works without root. The stuff on the screen moves sometime or not? Because if are fixed i think the burn in is easy.
Edit: i saw that there is an option to prevent it but the finger doesnt move. There is a option to unable it?
Click to expand...
Click to collapse
the finger also moves! but only max 10dp... dont know how many pixel that is.
but it has to be near to the sensor to work
with root it need less battery. because of a cmd that put the phone into low power mode. this only works with root!
Gesendet von meinem IN2023 mit Tapatalk
Any chance of removing the light for finger print
c_86 said:
Any chance of removing the light for finger print
Click to expand...
Click to collapse
Or replace it with a very transparent icon and only have the actually icon pop-up when the screen is touched. Overlay a black box with the icon and when screen is touched/updated it removes the box and shows the original icon
like the others have said, i would very much like for the option to set the fingerprint icon as a transparent image , due to the image retention nature, im very leery of burn in
hi..
ok here is a new beta. changed a few things:
1. mediacontrol: to avoid unwanted input. now you have to doubletap on mediainfo to enable control. after that single tap is play/pause and swipe left or right for next/prev track
2. animation time: i changed the timeinput from 2min to 120sec. so you can test with i.e. 2 sec and see the controls moving if you worry about burnin.
3. fingerprint: you can set a alpha value from 0 to 10 ... 0 you see no fingerprint and 10 is full
4. you can enter low_power mode without root !!! you have to grant permission with adb shell ->
Code:
adb shell pm grant io.github.domi04151309.alwayson android.permission.WRITE_SECURE_SETTINGS
the is also a batchscript in "Dieser PC\IN2023\Interner gemeinsamer Speicher\Android\data\io.github.domi04151309.alwayson\files\_Always"
to explain. the original version use this
Code:
Root.shell("settings put global low_power 1")
Root.shell("dumpsys deviceidle force-idle")
to go into lowpower state
this ->
Code:
Settings.Global.putInt(this.contentResolver, "low_power", 1)
is possible without root if you grant the WRITE_SECURE_SETTINGS permission
i'll attach the new version in First post
Running good.
I don't know if it's by design. But whenever it's on I put my finger near the finger print icon (which is not in the same location as the actually reader) but it sometimes will then wake and scan my finger other times it just doesn't respond and takes for me to constantly tap on the screen to get some sort of action.
Also
It's draining battery like no tomorrow. I had it installed. Had quite a few notifications come in and didn't touch my phone for 2 hours. And I dropped 25% in battery life and was quite noticibly warm. This was with all the battery saving switches on.
c_86 said:
Also
It's draining battery like no tomorrow. I had it installed. Had quite a few notifications come in and didn't touch my phone for 2 hours. And I dropped 25% in battery life and was quite noticibly warm. This was with all the battery saving switches on.
Click to expand...
Click to collapse
i got 8% in 3 hours... witch is not so bad... maybe something else is going wrong
what settings did you change from default in alwayson ??
inteks said:
i got 8% in 3 hours... witch is not so bad... maybe something else is going wrong
what settings did you change from default in alwayson ??
Click to expand...
Click to collapse
Need to check the refresh rate, from what i have heard, it runs at 60. if this can be controlled, the battery consumption and the heating issue will be solved.
I might be completely wrong.
areyouanand said:
Need to check the refresh rate, from what i have heard, it runs at 60. if this can be controlled, the battery consumption and the heating issue will be solved.
I might be completely wrong.
Click to expand...
Click to collapse
next version will force 60hz on alwayson
adb shell settings put global oneplus_screen_refresh_rate 1
and set userselected refresh on exit
im testing at the moment. update soon
Hi there,
I am on non rooted. I have obeserved this strange behavior: If you use it in a pocket, a reminder goes on that you are in pocket mode. This reminder stays on while you are inside the pocket and causes battery drain and potential burn in. Can you check it please: Just cover the brightness sensor with your hand.