Hi guys this is Axan
today i decided to upload stock Recovery for Mate10 Lite/Nova 2i/Honor 9i
Flash it through fastboot :
Code:
fastboot flash recovery recovery.img
Download link:
https://mega.nz/#!sWxWHIJA!6UqsQXWO7hLTXwx1PDScOQnXeX8vff4duN8_FkRiBt0
Do not forget to hit thanks button
thanks axan
what model is it for ?
phileg said:
what model is it for ?
Click to expand...
Click to collapse
Sould work for all RNE phones
Thank you so much you made my day
anyone tried this? for those who rooted their phones, were you able to update tru OTA by going back to stock recovery?
rendar123 said:
anyone tried this? for those who rooted their phones, were you able to update tru OTA by going back to stock recovery?
Click to expand...
Click to collapse
Hello
Yes,
* he downloads ota-mf.
But, it does not install error authentication.
Chisetdel31260 said:
Hello
Yes,
* he downloads ota-mf.
But, it does not install error authentication.
Click to expand...
Click to collapse
i see. the only way to update our rooted phone without error is to wait for huawei to release full OTA. tsk.
rendar123 said:
i see. the only way to update our rooted phone without error is to wait for huawei to release full OTA. tsk.
Click to expand...
Click to collapse
yes.
Guys,
I have a problem with my Mate 10 lite RNE -L21C432B130 (located Latvia), can anyone make a backup in TWRP -modem_fw, -modem_om, -modem_secure, -modemnvm_img. I don't have signal "No Service" after flashing CN full board firmvare with DC phoenix. But I restore my phone with Flasheables-Huawei Mate 10 Lite All Models. Phone booting without network, showing -No Service, only Emergency call. Did samebody have same problem? My now Baseband version - 21C60B265S000C000,21C60B265S000C000
Sorry for my English.
Serjega said:
Guys,
I have a problem with my Mate 10 lite RNE -L21C432B130 (located Latvia), can anyone make a backup in TWRP -modem_fw, -modem_om, -modem_secure, -modemnvm_img. I don't have signal "No Service" after flashing CN full board firmvare with DC phoenix. But I restore my phone with Flasheables-Huawei Mate 10 Lite All Models. Phone booting without network, showing -No Service, only Emergency call. Did samebody have same problem? My now Baseband version - 21C60B265S000C000,21C60B265S000C000
Sorry for my English.
Click to expand...
Click to collapse
Hi bro
In about phone
Does it show your imei???
Serjega said:
Guys,
I have a problem with my Mate 10 lite RNE -L21C432B130 (located Latvia), can anyone make a backup in TWRP -modem_fw, -modem_om, -modem_secure, -modemnvm_img. I don't have signal "No Service" after flashing CN full board firmvare with DC phoenix. But I restore my phone with Flasheables-Huawei Mate 10 Lite All Models. Phone booting without network, showing -No Service, only Emergency call. Did samebody have same problem? My now Baseband version - 21C60B265S000C000,21C60B265S000C000
Sorry for my English.
Click to expand...
Click to collapse
Here i wrote a solution
In third post
Do it may fix your problem
https://forum.xda-developers.com/8-lite/development/rebrand-to-cn-t3735356/post75205670
Axan said:
Here i wrote a solution
In third post
Do it may fix your problem
https://forum.xda-developers.com/8-lite/development/rebrand-to-cn-t3735356/post75205670
Click to expand...
Click to collapse
Yes before, I restore my IMEI (two), SN with HCU. Put location -EU, vendor -hw. Now I cheking and found CUST without CN, already EU.
Serjega said:
Yes before, I restore my IMEI (two), SN with HCU. Put location -EU, vendor -hw. Now I cheking and found CUST without CN, already EU.
Click to expand...
Click to collapse
Ok so restore twrp backup
In oeminfo and backup thread
Axan said:
Ok so restore twrp backup
In oeminfo and backup thread
Click to expand...
Click to collapse
Now I install full OTA RNE-L21C432B134 by eRecovery. Phone now whithout "Warning" in the boot, clean. But problem still same, No my provider network from my region. I think need right CUST.
Serjega said:
Now I install full OTA RNE-L21C432B134 by eRecovery. Phone now whithout "Warning" in the boot, clean. But problem still same, No my provider network from my region. I think need right CUST.
Click to expand...
Click to collapse
In eRECOVERY itself found firmware and you installed it??
Axan said:
In eRECOVERY itself found firmware and you installed it??
Click to expand...
Click to collapse
No?, with FF DNS.
PurpleStrawberry
ยท1m
I just performed my update here in the US (California). Does anyone know when it will be possible to have 4G/lte on the network? I have very slow internet (when I am not on the WIFI) as I only have 2G/Edge at the moment, for some reason MetroPCS is not compactable with Huawei 10 mate lite.
Thanks for any feedback
Is this recovery.img compatible with Huawei Mate 10 Pro BLA-L29 C432 ?
mkoijnbhu said:
Hi guys this is Axan
today i decided to upload stock Recovery for Mate10 Lite/Nova 2i/Honor 9i
Flash it through fastboot :
Code:
fastboot flash recovery recovery.img
Download link:
https://mega.nz/#!sWxWHIJA!6UqsQXWO7hLTXwx1PDScOQnXeX8vff4duN8_FkRiBt0
Do not forget to hit thanks button
Click to expand...
Click to collapse
Cannot flash any recovery in fastboot now.
Below is the error message.
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash recovery_ramdisk twrp.img
target reported max download size of 471859200 bytes
sending 'recovery_ramdisk' (25568 KB)...
OKAY [ 0.670s]
writing 'recovery_ramdisk'...
FAILED (remote: partition length get error)
finished. total time: 0.684s
Related
hi guys
im update my honor 7 (PLK-L01) from B130 to B330 via TWRP Recovery And now my phone just restarting and anything dosent work please help me
what can i do now !?
and i dont have nandroid backup from my phone
nima-n96 said:
hi guys
im update my honor 7 (PLK-L01) from B130 to B330 via TWRP Recovery And now my phone just restarting and anything dosent work please help me
what can i do now !?
and i dont have nandroid backup from my phone
Click to expand...
Click to collapse
download stock rom and flash it through adb : P
Michaelrev said:
download stock rom and flash it through adb : P
Click to expand...
Click to collapse
I tried this but dont start and just boot on recovery
nima-n96 said:
I tried this but dont start and just boot on recovery
Click to expand...
Click to collapse
you need to open it in huawei updateextractor and flash it one by one. boot, cache, cust, recovery, and system.
Michaelrev said:
you need to open it in huawei updateextractor and flash it one by one. boot, cache, cust, recovery, and system.
Click to expand...
Click to collapse
Once time flash B130 Frimware file (System.img , cust.img ,recovery , boot.img) but my phone just restarting
in second time i try with B330 frimware files (System.img , cust.img ,recovery , boot.img) and my phone just going on e recovery and doesn't start just hanging on boot splash logo and don't startup
i try to install with update .app and i put update file on dload folder and restart my phone with (vol up + vol down +power ) and hanging on on 5%
I try all way but doesn't start this phone
i think just turn up with nandroid backup from stock b130
Hi did you fixed it somehow ? I am facing the same issue, but with firmware B187 (single sim), bad for me that you cannot find this FW, it is custom FW for my Slovakian operator. Now it is ruined and I cannot use the phone because it is restarting all the time. Flashing B100 or B370 did not help at all, in that case phone will not boot at all and keeps restarting over and over. I contacted directly Huawei and my operator, somehow I need original B187 FW to fix it, if not phone will go to claim as I am business customer.
Ing.King said:
Hi did you fixed it somehow ? I am facing the same issue, but with firmware B187 (single sim), bad for me that you cannot find this FW, it is custom FW for my Slovakian operator. Now it is ruined and I cannot use the phone because it is restarting all the time. Flashing B100 or B370 did not help at all, in that case phone will not boot at all and keeps restarting over and over. I contacted directly Huawei and my operator, somehow I need original B187 FW to fix it, if not phone will go to claim as I am business customer.
Click to expand...
Click to collapse
You can use Multi-Tool to debrand it, and flash whichever firmware you wish.
I claimed Honor and got new unit with dualsim I don' t need anything to fix anymore. So no such thing like warranty break with bootloader unlocked. Repair center in protocol stated just, warranty OK unit switch.
Awesome, they gave you a new device.
frankly speaking, I didn't expect new phone after 2 weeks...
Ing.King said:
frankly speaking, I didn't expect new phone after 2 weeks...
Click to expand...
Click to collapse
No I have experience, Huawei provides good service if your problem is legit.
So i need to flash a cust.img through recovery because fastboot doenst work gives me "remote:command not allowed fastboot" but if i want to flash it through the recovery it says "Error: File larger then target device" i basicly only need to flash the cust.img to fix my phone.
What i tried:
Use fastboot, tried new version of android SDK
flashed diffrent recoverys, same results.
Please help i really need my phone ;/
Demian3112 said:
So i need to flash a cust.img through recovery because fastboot doenst work gives me "remote:command not allowed fastboot" but if i want to flash it through the recovery it says "Error: File larger then target device" i basicly only need to flash the cust.img to fix my phone.
What i tried:
Use fastboot, tried new version of android SDK
flashed diffrent recoverys, same results.
Please help i really need my phone ;/
Click to expand...
Click to collapse
Are you on stock rom? if so you have to enable oem for fastboot to work, it should be somewhere in the developer settings. otherwise i wouldn't know
jimandroidnerd said:
Are you on stock rom? if so you have to enable oem for fastboot to work, it should be somewhere in the developer settings. otherwise i wouldn't know
Click to expand...
Click to collapse
Im on b130 kiw l21 my phone shows wrong data under about phone and i cant apply a update to go back to stock from the dload file it simply instant says syatem update failed. I just want to revert back to stock then update to b140 and then to B330 emui 4.0 but i cant because the dload keeps failing
Demian3112 said:
Im on b130 kiw l21 my phone shows wrong data under about phone and i cant apply a update to go back to stock from the dload file it simply instant says syatem update failed. I just want to revert back to stock then update to b140 and then to B330 emui 4.0 but i cant because the dload keeps failing
Click to expand...
Click to collapse
you say you are on b130 but than you say you wanna go to stock rom? I dont really understand what you are telling me here
jimandroidnerd said:
you say you are on b130 but than you say you wanna go to stock rom? I dont really understand what you are telling me here
Click to expand...
Click to collapse
My device got bricked B330. So i had to reflash some stuff and ended up with false info under the section About Phone i had the same issue as him So i followed that instructions but i couldnt flash the Cust.img in the recovery (twrp) it gives me the error that i have as title. Without flashing the cust.img i cant use a revert package through dload since my Phone shows other information then the update package (denies to do the update instant) . My question how can i fix the error "File bigger then target device" so i can flash the Cust.img since fast boot doesnt work (error remote: command not allowed recovery) and twrp is my only option..
Instructions i followed to get back to stock.
Flash Boot.img, system.img, cust.img through twrp > flash stock recovery > Apply UK back to stock through dload
I cant flash cust.img so step 1 fails and i cant do the rest.
Anyone a idea why i cant flash this file through TWRP and fastboot? This is littery my last hope to get back to stock ;/
Demian3112 said:
Anyone a idea why i cant flash this file through TWRP and fastboot? This is littery my last hope to get back to stock ;/
Click to expand...
Click to collapse
I could give you my twrp backup? Maybe that will help
jimandroidnerd said:
I could give you my twrp backup? Maybe that will help
Click to expand...
Click to collapse
I mean i should be able to flash cust.img through fastboot right?
Demian3112 said:
I mean i should be able to flash cust.img through fastboot right?
Click to expand...
Click to collapse
No, i meant i can give u my twrp backup so you van restore it from twrp. Do you want it or not?
jimandroidnerd said:
No, i meant i can give u my twrp backup so you van restore it from twrp. Do you want it or not?
Click to expand...
Click to collapse
Nvm thanx! Fixed it im an idiot.
I was so bussy almost 2 days with this. I have no experience (14old) and i simply went bussy so much with it that i started looking over the simple things. I fixed it now it left me with a damm headache thnx anyways, i learned something again!
jimandroidnerd said:
No, i meant i can give u my twrp backup so you van restore it from twrp. Do you want it or not?
Click to expand...
Click to collapse
Oke i got a bit too excited. The fingerprint option is gone like it never has been there. Honor boot logo has a red H, i get the b140 update but cant apply it same issue with dload. Would you mind sharig your TWRP update? If it is possible for B330 and B130 Thx!
Demian3112 said:
Oke i got a bit too excited. The fingerprint option is gone like it never has been there. Honor boot logo has a red H, i get the b140 update but cant apply it same issue with dload. Would you mind sharig your TWRP update? If it is possible for B330 and B130 Thx!
Click to expand...
Click to collapse
You need to use kiwi_twrp_5-14_recovery.img
and the backup needs to contain all these partitions
boot.emmc.win
cust.ext4.win"
erecovery.emmc.win"
firmware.info"
firmware.vfat.win"
misc.emmc.win"
persist.ext4.win
system.ext4.win000
system.ext4.win001
restore those and you'll be back in business
This rom also contains the /cust partition for b130
http://forum.xda-developers.com/honor-5x/development/custom-rom-starter-template-honor-5x-t3328809
clsA said:
You need to use kiwi_twrp_5-14_recovery.img
and the backup needs to contain all these partitions
boot.emmc.win
cust.ext4.win"
erecovery.emmc.win"
firmware.info"
firmware.vfat.win"
misc.emmc.win"
persist.ext4.win
system.ext4.win000
system.ext4.win001
restore those and you'll be back in business
This rom also contains the /cust partition for b130
http://forum.xda-developers.com/honor-5x/development/custom-rom-starter-template-honor-5x-t3328809
Click to expand...
Click to collapse
This is what i got.. http://prntscr.com/brv0ay the Repository doesnt contain this files aswell any idea? Is it possible to flash for example a full Kiw L22 rom and then use a revert package for L21 through Dload?
Oke what i did:
Wipe
Apply Cust partition with terminal
Apply backup/restore
flash stock recovery
Boots same issue, I just need the dload to get to work so i can flash the recovery pack. But it stays at 0 percent even after 15 mins.
What i found out is that i dont have the stock firmware (Dont have fingerprint and stuff, device doenst show as KIW L21), so i doenst do a ota update and local update ofcourse. I need a TWRP backup with firmware included. What im trying now is installing L21 MIDDLE-EAST firmware and then try to use a revert package for L21 through OTA.
Arobase40 said:
Well, I'm not sure this is a good idea as it took me 11 days to upgrade from B140 (Lollipop) to B330 (Marshmallow) and only a few minutes to brick my Honor 5x L21 using a backup from kiwi_twrp_5-14_recovery.img when I wanted to revert back to B140... ^^
At boot time after the restore, I have an animated red H letter from the Honor Logo and impossible to get back to the welcome screen nor to any other screen so I don't have access to TWRP anymore...
We really need to have access to the official downgrade firmware from Honor !!!
Click to expand...
Click to collapse
Same issue.. I get red H honor logo.. cant apply a single update through ota/dload and finger print is gone.. I can do everything, installing apps and stuff but i cant revert back to full stock.
clsA said:
You need to use kiwi_twrp_5-14_recovery.img
and the backup needs to contain all these partitions
boot.emmc.win
cust.ext4.win"
erecovery.emmc.win"
firmware.info"
firmware.vfat.win"
misc.emmc.win"
persist.ext4.win
system.ext4.win000
system.ext4.win001
restore those and you'll be back in business
This rom also contains the /cust partition for b130
http://forum.xda-developers.com/honor-5x/development/custom-rom-starter-template-honor-5x-t3328809
Click to expand...
Click to collapse
Could you link me the firmware.vfat and misc.emmc and persist.ext. Is there a way to make the update.app a flashable zip? Anyways any idea what i still could do?
Anyways what would you recommend me to go back to stock right now? Is it cuz my system partition is messed up? How to fix? thx anyways!
Arobase40 said:
As I said it is NOT really a good idea to use a TWRP backup to revert back from Marshmallow to Lollipop as it will brick your device !
I also said : ask your local Honor technical support for an official revert back firmware as your whole system is obviously messed up.
I don't know how you upgraded your smartphone but better downgrade to Lollipop first and try to upgrade again to MM a "proper way"...
Click to expand...
Click to collapse
]
Thats the point.. I simply cant. Phone doenst accept dload updates instant says "System Failed", most near honor technical support is 98 km out.
Ok anyways does anyone have a B330 full stock backup?
Arobase40 said:
I didn't say you had to move yourself to a technical support but place a phone call or mail them. You should find their phone number or their email address from your the Honor Website.
I'll do it myself by tomorrow...
Click to expand...
Click to collapse
I fixed it. Go to hi honor and search for honor 5x firmware, download it unpack it put the update.app on dload on microsd make sure you flashed stock recovery through fastboot hold power + volume down + volume up until it vibrates and done. I couldnt install any dload file on XDA the error "system failed" means the update is not for your device. The one on hihonor was the only one that worked for me ive been bussy 3 days its worth trying. I can link/upload you the download and instructions if you want to but ill do it tomorrow.
jimandroidnerd said:
No, i meant i can give u my twrp backup so you van restore it from twrp. Do you want it or not?
Click to expand...
Click to collapse
Hello i have the same problem could you please give me your backup so i can try it?
Same issue
Hi,
As descripted in the title I can not restore my Honor 9 Anymore... I don't know what I did wrong but when I flash a new recovery or so in Fastboot I get the error "partion length error")
Any idea how I can fix this?
I have access to:
- TWRP Oreo (ADB not working)
- Fastboot Mode
- E-Recovery.
Do You used this command?:
fastboot flash recovery_ramdisk "name of your recovery"
4r44444 said:
Hi,
As descripted in the title I can not restore my Honor 9 Anymore... I don't know what I did wrong but when I flash a new recovery or so in Fastboot I get the error "partion length error")
Any idea how I can fix this?
I have access to:
- TWRP Oreo (ADB not working)
- Fastboot Mode
- E-Recovery.
Click to expand...
Click to collapse
Hello, I'm in Italy too I have the same problem are on oreo B360 C432 and 'I have only erecovery and bootloader flapped. IF you solved, please tell me how you did it. thank you
The same problem, with b 183 I was updating to b360, but after updating my phone just stands in Huawei eRecovery. I'm trying eRecovery and I can not find anything. 2 days I'm trying stock rom via sd card (dload) and nothing. I read the entire xda website and they do not help me. so please help me. my phone is locked and FRP locked. Essentially, I had this update through FF and after that the phone just stopped in eRecovery mode, and nothing has helped me for 2 days, my eyes are like the owl
comibumbar said:
The same problem, with b 183 I was updating to b360, but after updating my phone just stands in Huawei eRecovery. I'm trying eRecovery and I can not find anything. 2 days I'm trying stock rom via sd card (dload) and nothing. I read the entire xda website and they do not help me. so please help me. my phone is locked and FRP locked. Essentially, I had this update through FF and after that the phone just stopped in eRecovery mode, and nothing has helped me for 2 days, my eyes are like the owl
Click to expand...
Click to collapse
I've just solved with DC PHOENIX. What is fundamental is to put the same firmware before the brick. You can do it yourself using the appropriate section.
I got into this problem and fixed it.
I downloaded treble os and flashed it in fastboot then used adb commands to restore mine
superuser590 said:
I got into this problem and fixed it.
I downloaded treble os and flashed it in fastboot then used adb commands to restore mine
Click to expand...
Click to collapse
Can you explain it to me? I'm in the same situation right now.
themagicalmage22 said:
Can you explain it to me? I'm in the same situation right now.
Click to expand...
Click to collapse
Did you fix it or do you still need help?
my phone is RNE-L21C185 i'm use firmware finder and update the oreo update of RNE-L22C636 and after it finish it restart and setup successfully to 100% and then restart into huawei Erecovery and i factory reset and every time i turn on the phone it open huawei Erecovery . i ask for solution ?? and i think i need rollback package but i search and didn't found
Same here
Tried the factory reset, "download latest version and recovery", nothing helped
try letting it reboot a whole bunch of times and the factory reset option should appear in recovery
try flashing stock recovery_ramdisk if it doesn't
WaxysDargle said:
try letting it reboot a whole bunch of times and the factory reset option should appear in recovery
try flashing stock recovery_ramdisk if it doesn't
Click to expand...
Click to collapse
That would require the bootloader to be unlocked right?
I'm not finding a solution, i'm considering sending my unit to warranty
Ok
I can answer your concern ... but if you breathe and relax before writing ... I do not fully understand what you have done ...
But you gave me to understand that without making a Rebrand in your RNE-L21C185 to the RNE-L22C636 version try to install the OREO version of this last ... L22? this is true.
Besho Gemo said:
my phone is RNE-L21C185 i'm use firmware finder and update the oreo update of RNE-L22C636 and after it finish it restart and setup successfully to 100% and then restart into huawei Erecovery and i factory reset and every time i turn on the phone it open huawei Erecovery . i ask for solution ?? and i think i need rollback package but i search and didn't found
Click to expand...
Click to collapse
emorenoebultron said:
I can answer your concern ... but if you breathe and relax before writing ... I do not fully understand what you have done ...
But you gave me to understand that without making a Rebrand in your RNE-L21C185 to the RNE-L22C636 version try to install the OREO version of this last ... L22? this is true.
Click to expand...
Click to collapse
yes my region was RNE-L21C185 and i searched in firmware finder under another region RNE-L22C636 and update phone from RNE-L22C636 now i can't open phone always get recovery mode like photo
First rebrand
Besho Gemo said:
yes my region was RNE-L21C185 and i searched in firmware finder under another region RNE-L22C636 and update phone from RNE-L22C636 now i can't open phone always get recovery mode like photo
Click to expand...
Click to collapse
Well, in no way can you install a firmware version from one region to another without doing the Rebrand, that's why your device is in erecovery mode ... because the OEIMFO of the RNE-L21C185 is not compatible with the RNE-L22636 firmware ... if you want to install you should first do a rebrand ... otherwise you can not do anything.
emorenoebultron said:
Well, in no way can you install a firmware version from one region to another without doing the Rebrand, that's why your device is in erecovery mode ... because the OEIMFO of the RNE-L21C185 is not compatible with the RNE-L22636 firmware ... if you want to install you should first do a rebrand ... otherwise you can not do anything.
Click to expand...
Click to collapse
can you tell me how to do a rebrand
Ok
Besho Gemo said:
can you tell me how to do a rebrand
Click to expand...
Click to collapse
You have the bootloader code of your device.
emorenoebultron said:
You have the bootloader code of your device.
Click to expand...
Click to collapse
yes .. but i can't open the phone to turn on oem
Hi folks, I've had a Huawei P20 Lite lying around here for a while. It is a demo device.
I was able to successfully unlock the bootloader with using the Testpoint method.
Now I need help to change the country code from "demo" to "eu" and I also need the right firmware. Is there a free way to change the country code?
I hope you can help me with that ? Thanks in advance.
cvpcvp said:
Hi folks, I've had a Huawei P20 Lite lying around here for a while. It is a demo device.
I was able to successfully unlock the bootloader with using the Testpoint method.
Now I need help to change the country code from "demo" to "eu" and I also need the right firmware. Is there a free way to change the country code?
I hope you can help me with that ? Thanks in advance.
Click to expand...
Click to collapse
Hi, look here
If you are running EMUI 9.1, flash C432 oeminfo and use variant with HuRupdater https://forum.xda-developers.com/t/...0-0-046-070f-emui-8-0-0.4324543/post-85538623
https://forum.xda-developers.com/t/...0-0-046-070f-emui-8-0-0.4324543/post-85538725
Thanks in advance. Somehow I can no longer get into the / system or the smartphone can no longer boot. When running HuRupdater I also get an error message that / System cannot be mounted. It only boots TWRP
I was able to import the oeminfo beforehand. There weren't any problems.
cvpcvp said:
Thanks in advance. Somehow I can no longer get into the / system or the smartphone can no longer boot. When running HuRupdater I also get an error message that / System cannot be mounted. It only boots TWRP
I was able to import the oeminfo beforehand. There weren't any problems.
Click to expand...
Click to collapse
Can you write down exactly what you did?
What is your version of EMUI?
In fastboot mode run commands:
fastboot oem get-build-number
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
and post the results.
I guess I've stupidly used the wrong command line a number of times to get twrp to run.
fastboot flash system, boot or recovery twrp....
At least it worked with the country ID change ... if only a small consolation for the first
fastboot oem get-build-number
(bootloader) :ANE-LX1 8.0.0.112(C432)
fastboot getvar vendorcountry
vendorcountry: hw/eu
fastboot oem oeminforead-CUSTOM_VERSION
FAILED (remote: 'The reason of failed input oem_nv_item error!')
fastboot oem oeminforead-SYSTEM_VERSION
(bootloader) :ANE-LX1 8.0.0.112(C432)
cvpcvp said:
ANE-LX1 8.0.0.112(C432)
Click to expand...
Click to collapse
your firmware is incomplete, it must be 8.0.0.143, if I'm not mistaken. Try again Huru method & factory reset in Stock recovery (not in TWRP!).
Or, download Service ROM Link , unpack , there's dload folder in "Software" . Copy dload folder (without unpacking it) to the OTG flash, turn off the phone and press and hold both volume buttons + Power ( this method will lock the BL again).
Thanks for the files. But i get an
Softwaere install failed
Incompatibility with current version.
Please download the correct update package.
EDIT: cant find the firmware version: ANE-L01C185B112 / ANE-LX1 8.0.0.112(C432)
EDIT2: same fail with 8.0.0.178(C432)
cvpcvp said:
Softwaere install failed
Incompatibility with current version
Click to expand...
Click to collapse
Probably due to incomplete firmware .112 , ( it was stupidity on my part to suggest Service ROM in this case, sorry. Maybe I was too sleepy...).
1. Try again Hurupdater method, it should work (don't forget to press Volume down)
2. Reboot into eRecovery, if possible, and select Download latest version and recovery
cvpcvp said:
cant find the firmware version: ANE-L01C185B112
Click to expand...
Click to collapse
Flash only C432 regional variant!
-Alf- said:
Probably due to incomplete firmware .112 , ( it was stupidity on my part to suggest Service ROM in this case, sorry. Maybe I was too sleepy...).
1. Try again Hurupdater method, it should work (don't forget to press Volume down)
2. Reboot into eRecovery, if possible, and select Download latest version and recovery
Click to expand...
Click to collapse
Can you explain me, how i can Boot into twrp without Flash twrp in recovery ramdisk?
cvpcvp said:
without Flash twrp in recovery ramdisk?
Click to expand...
Click to collapse
And what stopping you from doing it?
-Alf- said:
And what stopping you from doing it?
Click to expand...
Click to collapse
Okay, idon't think that's relevant anymore anyway
I found the problem. It was the TWRP version. I took the latest one (twrp-3.5.2_9-0-anne.img) and it couldn't mount the /system partition. Now I took a version from this forum (twrp-3.2.1-0.img), which seems to be specially adapted for the Huawei devices. Unfortunately, it doesn't support OTG, but that wasn't a problem because I moved the files it to the internal memory.
Only with this twrp version could HuRUpdater.zip be executed correctly and all other files just like that. Here, too, I was first asked to press the vol-down button.
After the smartphone finally boots properly, I flash the firmware via dload to lock the bootloader again and do over the Recovery Wipe data / factory reset + cach partition.
Now I'm on version 8.0.0.046(0CXB). Unfortunately the device cannot find a new firmware version and nothing can be updated via HiSuit.
Can you tell me which step I have to take now to get the latest Android version for the device?
Thank you very much so far for your help
cvpcvp said:
Now I'm on version 8.0.0.046(0CXB)
Click to expand...
Click to collapse
Unfortunately, you have incomplete FW there again, I think you're doing something wrong. And until the correct FW is there, you won't be able to receive OTA update or update via dload.
If you have followed instructions to the letter , it must work.
Use this TWRP . ( I don't know why you used TWRP 3.5.2.9, in the guide there is a link to 3.2.1-pretoriano80.). 3.5.2.9 isn't fully compatible with our device.
Try this way out:
- Flash TWRP
- Wipe - format data
- Reboot back to TWRP
- Wipe - Advanced wipe - wipe Dalvik/ART, cache, data, system
- Go back and flash HuRu
Note: the installation of the first file (write radio image...) must take longer, 2-3 minutes, this is proof that the installation is proceeding properly.
Btw, have you tried update via eRecovery & Wi-Fi?
Did it exactly like that. And then the 9.1.0.370 (C432) from the same thread loaded (dload / ANE-L01_hw_eu).
Now i have the firmware: ANE-LGRP2-OVS 9.1.0.370 in the device information.
Unfortunately, there is no further update, but I also don't know whether the current one is already the most recent?
What I also notice is that Dual-Sim settings are available in the menus. The IMEI2 is only provided with 000000000000000. I know that my device "only" supports single SIM.
Can I fix that too? Then everything should be fine as far as possible
cvpcvp said:
ANE-LGRP2-OVS
Click to expand...
Click to collapse
Wrong again .
cvpcvp said:
What I also notice is that Dual-Sim settings are available in the menus. The IMEI2 is only provided with 000000000000000. I know that my device "only" supports single SIM.
Click to expand...
Click to collapse
Oh, it's all clear now
Because this oeminfo is for dual SIM. Oeminfo for single SIM can be found for example here:
https://forum.xda-developers.com/t/c432-single-sim-oeminfo.3873312/
Also update_all_hw.zip file is for ANE-L21, you need ANE-L01, unfortunately, I don't have files for single SIM.
cvpcvp said:
Can I fix that too?
Click to expand...
Click to collapse
Maybe...You have to downgrade to Oreo via HuRupdater using downloaded files, then install TWRP over eRecovery and install stock Recovery.
Download https://androidhost.ru/2zMw and create dload folder .
In TWRP install new oeminfo.img , then go back to the main TWRP's menu, select Reboot > Power off. Use three buttons kombo to flash service ROM.
To be honest, I've never tried a variation like this, so I'm not responsible for this procedure, but it should work. The question is, is it worth it ...
-Alf- said:
Wrong again .
Click to expand...
Click to collapse
Which step is missing now exactly? I followed the steps from you. I also used the files from the other thread that you linked. The single-sim / dual-sim problem is not important either. The main thing is that it works that way too
cvpcvp said:
The single-sim / dual-sim problem is not important either.
Click to expand...
Click to collapse
Are you sure? In my opinion, this is your main problem...
Hello, it's been a while. I sat down again and went through everything. The dual SIM files fold onto a single SIM smartphone. I was finally able to install the update via eRecovery after flashing via TWRP. Then two updates were pulled or installed via Android OS. Now I'm on 9.1.0.132 (C432E5R1P7).