Related
Hi, because with last update increased count of people with bricket phone, I just tryed search for way how to repair this phone. It seems, that last possible way how to save your phone is emergency mode.
I would like to notify you, that I didn't tested it (I'm had not luck enough to brick my phone yet ). I just searched and tried write this for help to others.
So, let's go on.
1) If it's not possible connect to phone via ADB (in Adroid SDK/tools run "adb shell") at all you will try next steps. If it will work, you can use another, verified tools like custom recovery or KDZ_FW_UPD (search on forum for more) [HOWTO] Flash original firmware on P500, )
2) If you fail in previous step, you can try enter into emergency mode manually and try to flash ROM with KDZ_FW_UPD:
Download KDZ updater and uncompress it
http://www.4shared.com/file/UleS4dP3/KDZ_FW_UPD_EN.html
Install msxml.msi from the uncompressed directory
Charge your battery to almost full state (I'm not sure, but it can be reason if phone doesn't start)
Turn phone off somehow (remove battery etc.)
Install drivers properly
Get rid of all usb drivers like Nokia, microsoft visual ++ run time environments
Install the LG drivers by selecting the update manager from the lg site
Disable LGE Virtual Modem. In your Windows operating system, go to Control Panel > System > Hardware > Device Manager > Modems > Right click on LGE Virtual Modem and click Disable.
Press and keep pressed "Volume up"+"Return" and connect USB cable to phone
Yellow screen with text emergency mode should appeared
Shake the handset (I know, it sounds ... strange, but it helps for ones, so... why don't try it?) UPDATE: Read some quotes on bottom.
Run KDZ_FW_UPD.exe (Has administrator).
Select Type : 3GQCT (I have one report that CDMA mod works too)
Select PhoneMode : DIAG (in case of fail try EMERGENCY, and as last chance use CS_EMERGENCY)
I Recommend do not switch phone off. There was some people, which done it and after they were not be able to turn it on again. If flashing failed, just select some another mode and try it again, again, try shake/connect disconnect, again, again....
In KDZ file : Choose the ROM file you downloaded in the first step
Press Launch software update
Shake the handset (I know, it sounds ... strange, but it helps for ones, so... why don't try it?) UPDATE: Read some quotes on bottom.
Make sure that all update was done successfully. Phone should restart itself automatically
Disconnect the USB cable from the phone
Press the three button combo for HW reset of device i.e volume up + home + power button
List to do based on Zecanilis's [HOWTO] Flash original firmware on P500
3) Still no success? Wait for more "What I can do" or just go to LG and let repair on them.
Source:
http://forum.gsmhosting.com/vbb/f282/vygis-shell-v1-1-0-josedavido-1166478/ (included file named "Flash help.txt" in application)
http://android.modaco.com/content/l...modaco-com/321895/faq-gt540-reference-thread/
Please let me know if it works. I just searched for way and I haven't possibility to test this steps for now. I will do update if it will be necessary, same as I will try describe more about software which I founded.
Some experiences from thread(s):
AVanover5: ...It works if you set the mode to CDMA and DIAG. Just to let people know. Not sure if it'd work without the recovery screen or not. I never tried it ironically, haha. Thank you guys.
geejay2: ...Bricking seems to be easily achieved by forgetting to disable the LG Modem driver. Apparently the modem driver interferes during flashing. Also I noted that kdz is not stable under Win2k, I switched to WinXP to flash successfully. I saw several aborted flashing attempts in WinXP with modem driver enabled.
domenic_s:KDZ_FW_UPD doesn't work (Application cannot start) -.- Using Windows 7 64bit version. //edit: allright tried another pc (win xp 32bit) and yeah - it worked... I'm so happy.
Click to expand...
Click to collapse
About shaking (sorry, but I still can't believe... )
salte_eskil:wow! shaking the phone really worked! seems kind of stupid but thanks to you all at the xda forum for tips and tricks
4wd vege: Now unbricked. Strangely kdz updater only saw my phone after shaking!!!
me2kimi:It sound crazy to shake the phone while at emergency mode. I's crazy but it magic. ...So what I do is connect to usb, Launch software update at kdz while shaking the phone. Then after that kdz is working like normal.
Click to expand...
Click to collapse
I tried with all possible combination.. with and without battery.. vol- home, vol + return, power vol+ home.. end more.. but phone don't turn on...
In meantimes the phone is in the service LG.. hope...
Exscuse me for my English
Did you had phone off before trying this? And also battery should be charged. I just added this things...
If event that it not show you emergency mode, LG service and warranty is probably the only way how to proceed. Sorry. But I will be searching if another way will exist...
Good work .. I hope that you will find a way to solve ... especially for other users .. good luck
Good work @The_ERROR.
It should work. I think you should also add that the phone mode should be set to Emergency (and not DIAG as mentioned) in the kdz updater.
Moved to development and stickied it for a while!
Thank you!
Cheers
socialdistortion said:
Good work @The_ERROR.
It should work. I think you should also add that the phone mode should be set to Emergency (and not DIAG as mentioned) in the kdz updater.
Click to expand...
Click to collapse
Good to know - do you know differences between CS_EMERGENCY and EMERGENCY?
Recovery Phone?!
Hello,
Had anyone tried "Recovery Phone" from the LGMobile Update app? It's under the "Customer Support" menu. Enter IMEI or S/N and see if it can bring it up to life.
Cheers.
Yes.. I tried.. but nothing.. the LG MOBILE UPDATE crashed because don't wiew the phone in Usb...
zeule said:
Hello,
Had anyone tried "Recovery Phone" from the LGMobile Update app? It's under the "Customer Support" menu. Enter IMEI or S/N and see if it can bring it up to life.
Cheers.
Click to expand...
Click to collapse
I can add that as next possible way Let me expect it.
batman89i said:
Yes.. I tried.. but nothing.. the LG MOBILE UPDATE crashed because don't wiew the phone in Usb...
Click to expand...
Click to collapse
So... it sad everything
The_ERROR said:
Good to know - do you know differences between CS_EMERGENCY and EMERGENCY?
Click to expand...
Click to collapse
Not really. Gathered some info though. We use emergency mode when the phone boots into only emergency mode else we try CS emergency as last option.
In any case this method will work only if the kdz updater recognises the phone.
Further reading http://android.modaco.com/content/lg-gt540-optimus-gt540-modaco-com/321895/faq-gt540-reference-thread/
I was able to do the KDZ, actually thats the only way possible. Please add this to the list:
1. Get rid of all usb drivers like Nokia, microsoft visual ++ run time environments.
2. Install the LG drivers by selecting the update manager from the lg site.
3. Disable the modem driver.
4. Once done, reboot the handset and when it has come to emergency mode connect it via USB.
5. Its going to detect it as usb drive. Launch KDZ. No need to go into Emergency mode.
6. shake the handset - IT DID WORKED FOR ME.
My suggestion don't give up. It took me around 14 hours to bring the handset back to original firmware and here I am today trying to boot the rom once again.
7. UPDATE AND ENJOY.
pariksheetsharma said:
I was able to do the KDZ, actually thats the only way possible. Please add this to the list:
1. Get rid of all usb drivers like Nokia, microsoft visual ++ run time environments.
2. Install the LG drivers by selecting the update manager from the lg site.
3. Disable the modem driver.
4. Once done, reboot the handset and when it has come to emergency mode connect it via USB.
5. Its going to detect it as usb drive. Launch KDZ. No need to go into Emergency mode.
6. shake the handset - IT DID WORKED FOR ME.
My suggestion don't give up. It took me around 14 hours to bring the handset back to original firmware and here I am today trying to boot the rom once again.
7. UPDATE AND ENJOY.
Click to expand...
Click to collapse
Thanks, I will do!! Only about 4 and five.
First reboot the handset and when it has come to emergency mode connect it via USB
and then
It's going to detect it as usb drive. Launch KDZ. No need to go into Emergency mode.
So, whats about if phone didn't go into emrgency itself (for example stuck on Android logo)?
The_ERROR said:
Thanks, I will do!! Only about 4 and five.
First reboot the handset and when it has come to emergency mode connect it via USB
and then
It's going to detect it as usb drive. Launch KDZ. No need to go into Emergency mode.
So, whats about if phone didn't go into emrgency itself (for example stuck on Android logo)?
Click to expand...
Click to collapse
I am talking about phone getting into Emergency mode, KDZ doesn't need to switch to CS_EMERGENCY or EMERGENCY Switch off the phone first, then you are either connect it to USB cable or you can remove it from the USB cable. Key combination to bring the phone only in emergency mode are:
1. Connected to USB cable, only thing visible is the LG logo, this is because its getting charged. Press VOL UP + BACK BUTTON
2. Not connected to USB cable and is not charging and so switched off: Press VOL UP + BACK BUTTON + POWER BUTTON
In both the cases phone will switch to a yellow screen showing: "Emergency mode!!" and will remain like that.
It's only in Emergency mode that the handset will be detected like a USB drive and can be KDZed.
I seriously doubt the "Shake your phone part". It just sounds so ...
Peace
pariksheetsharma said:
I am talking about phone getting into Emergency mode, KDZ doesn't need to switch to CS_EMERGENCY or EMERGENCY Switch off the phone first, then you are either connect it to USB cable or you can remove it from the USB cable. Key combination to bring the phone only in emergency mode are:
1. Connected to USB cable, only thing visible is the LG logo, this is because its getting charged. Press VOL UP + BACK BUTTON
2. Not connected to USB cable and is not charging and so switched off: Press VOL UP + BACK BUTTON + POWER BUTTON
In both the cases phone will switch to a yellow screen showing: "Emergency mode!!" and will remain like that.
It's only in Emergency mode that the handset will be detected like a USB drive and can be KDZed.
Click to expand...
Click to collapse
OK, I edited it. But I kept possibilities of EMERGENCY and CS_EMERGENCY modes if standard way failed. About switch into emergency, I think that it does not matter which way for emergency is used.
socialdistortion said:
I seriously doubt the "Shake your phone part". It just sounds so ...
Peace
Click to expand...
Click to collapse
Yes, I know... but if it will help, it doesn't matter how stupid it sounds....
Stuck in LG logo, unable to boot into emergency mode.
What can I do? Go to LG?
cjbi said:
Stuck in LG logo, unable to boot into emergency mode.
What can I do? Go to LG?
Click to expand...
Click to collapse
Have you tried all the mentioned methods? Press the combination buttons a little longer (Maybe that can help).
BTW what did you do that bricked your phone?
Hi all,
I have a really weird problem im hoping someone can help me with.
I cant seem to get my S2 detected in windows when connected via USB. It charges no problems but I cannot see the storage on the phone.
However the phone is deteced in download mode OK so I can use odin to flash firmware if needed. I have tried gonig back to stock image but still makes no difference. Done all the driver installs / uninstalls, reboot of PC and phone etc, but nothing seems to make a difference, I just can see the storage under windows.
Any help would be greatly appreciated.
Thanks
jutler123 said:
Hi all,
I have a really weird problem im hoping someone can help me with.
I cant seem to get my S2 detected in windows when connected via USB. It charges no problems but I cannot see the storage on the phone.
However the phone is deteced in download mode OK so I can use odin to flash firmware if needed. I have tried gonig back to stock image but still makes no difference. Done all the driver installs / uninstalls, reboot of PC and phone etc, but nothing seems to make a difference, I just can see the storage under windows.
Any help would be greatly appreciated.
Thanks
Click to expand...
Click to collapse
Go 2 Control Panel>Hardware and Sound>Device Manager, then plug in a cable and watch for changes to the hardware list. If your phone appears in the list, then all should be ok.
do you mean when the phone is in normal mode or download mode? I cant see the phone listed in device manager when in normal mode.
When i try to put the phone in mass storage mode via the USB utilities in the setting, I get the prompt to connect a USB cable, however, when i do connect it, the pop up fails to disappear and the PC doesnt detect
jutler123 said:
do you mean when the phone is in normal mode or download mode? I cant see the phone listed in device manager when in normal mode.
When i try to put the phone in mass storage mode via the USB utilities in the setting, I get the prompt to connect a USB cable, however, when i do connect it, the pop up fails to disappear and the PC doesnt detect
Click to expand...
Click to collapse
Probably it's a Windows fault. Try on another computer, but if the problem persists, then it's a phone issue.
yeap, tried it on more than one machine. One one machine it would detect in normal or download mode, but on another machine it detects in download mode but not normal mode. i dont understand how it can transfer data while in download mode as it must detect some sort of storage???
jutler123 said:
yeap, tried it on more than one machine. One one machine it would detect in normal or download mode, but on another machine it detects in download mode but not normal mode. i dont understand how it can transfer data while in download mode as it must detect some sort of storage???
Click to expand...
Click to collapse
Try turning off 'Usb Debugging' if ticked.
tried that too. when selecting USB mass storage, it prompts that usb debugging will be switched off
Reinstall Windows. This is the best solution.
My LG D605 does not boot and I have a black screen. Before brick i go via ADB to recovery on official KK. Mobile is dead USB dont work
I have the same problem help!!!
LoToR122 said:
My LG D605 does not boot and I have a black screen. Before brick i go via ADB to recovery on official KK. Mobile is dead USB dont work
Click to expand...
Click to collapse
No responses to Emergency mode flashing by KDZ?
Try at least with HARD RESET... Hold Power Key + Volumen Down key + Home key
When LG logo appears, release all the keys! Good luck!
LoToR122 said:
My LG D605 does not boot and I have a black screen. Before brick i go via ADB to recovery on official KK. Mobile is dead USB dont work
Click to expand...
Click to collapse
Give me a pm when you have 1 hour I might have an idea to save you.
christi9503 said:
Give me a pm when you have 1 hour I might have an idea to save you.
Click to expand...
Click to collapse
Can you help me? pls
kikobuendia said:
I have the same problem help!!!
Click to expand...
Click to collapse
First, there is no such thing as hardbrick (not anymore, most modern phones cant be hardbriked )
Be sure, u have all the drives and whatnots installed in the copmuter !
from: http://forum.xda-developers.com/showthread.php?t=2730501
[Q] How to install a .kdz?
[A] (Tutorial thanks to @[W]ar[H]ead, confirmed working by TaZRAge)
#1) First to get into download mode:
1. Remove battery
2. Put usb to computer and phone (w/o battery)
3. Hold "Vol up" button
4. Put battery back
You will get into download mode (aka emergency mode).
#2) Unpack kdz flasher, and install msxml.msi.
#3) Run KDZ_FW_UPD.exe set "type" to 3GQCT and "phonemode" to DIAG.
#4) Choose the .kdz file to flash. Download link is under the "Downloads"
#5) Click "Launch software update" and wait. Phone must be connected in download mode(!). KDZ installer might get stuck but DO NOT disconnect it. (Unless it stays that way for a hour as a example)
NOTE: .kdz is a .kdz, you cannot extract it. If you get a .zip from the LG .kdz site you did something wrong.
Cisf said:
First, there is no such thing as hardbrick (not anymore, most modern phones cant be hardbriked )
Be sure, u have all the drives and whatnots installed in the copmuter !
from: http://forum.xda-developers.com/showthread.php?t=2730501
[Q] How to install a .kdz?
[A] (Tutorial thanks to @[W]ar[H]ead, confirmed working by TaZRAge)
#1) First to get into download mode:
1. Remove battery
2. Put usb to computer and phone (w/o battery)
3. Hold "Vol up" button
4. Put battery back
You will get into download mode (aka emergency mode).
#2) Unpack kdz flasher, and install msxml.msi.
#3) Run KDZ_FW_UPD.exe set "type" to 3GQCT and "phonemode" to DIAG.
#4) Choose the .kdz file to flash. Download link is under the "Downloads"
#5) Click "Launch software update" and wait. Phone must be connected in download mode(!). KDZ installer might get stuck but DO NOT disconnect it. (Unless it stays that way for a hour as a example)
NOTE: .kdz is a .kdz, you cannot extract it. If you get a .zip from the LG .kdz site you did something wrong.
Click to expand...
Click to collapse
You don't know what you are saying. You can HARDBRICK ANY modern device. By definition hardbrick means phone won't turn on won't respond and in some cases recognized as usb when connected to pc as usb bulk or qcom usb. etc. You damage the second bootloader and tell me what happens. You will see what you get.
christi9503 said:
You don't know what you are saying. You can HARDBRICK ANY modern device. By definition hardbrick means phone won't turn on won't respond and in some cases recognized as usb when connected to pc as usb bulk or qcom usb. etc. You damage the second bootloader and tell me what happens. You will see what you get.
Click to expand...
Click to collapse
first this is offtopic. Second, u are wrong ! Unless the phone is pshisicaly damaged (misfuctioning components or damaged), u cant hardbrick the phone with uploading different soft. on it (unless u change voltages and overclok, if that is possible on the device). Ofecourse they are exceptions, but all major modern manufactors, make hardbrick proof devices. Also, how exactly would u modify the emergency mode, and more important even if you could, why wold u do it !?
More on to the topic, none of the operations of rooting, bootloader installing, kdz install or CMx install , gets near the emergency mode. It remains intact.
Just retry all normal steps for installing kdz or recovery again, check the cables, all drivers on pc, and is best to have a charged phone battery.
EDIT: @kikobuendia
i found this post, same operations as mentioned in first reply, but more detailed:
http://forum.xda-developers.com/opt...optimus-l9-ii-lg-d605-unroot-unbrick-t2964693
Cisf said:
first this is offtopic. Second, u are wrong ! Unless the phone is pshisicaly damaged (misfuctioning components or damaged), u cant hardbrick the phone with uploading different soft. on it (unless u change voltages and overclok, if that is possible on the device). Ofecourse they are exceptions, but all major modern manufactors, make hardbrick proof devices. Also, how exactly would u modify the emergency mode, and more important even if you could, why wold u do it !?
More on to the topic, none of the operations of rooting, bootloader installing, kdz install or CMx install , gets near the emergency mode. It remains intact.
Just retry all normal steps for installing kdz or recovery again, check the cables, all drivers on pc, and is best to have a charged phone battery.
EDIT: @kikobuendia
i found this post, same operations as mentioned in first reply, but more detailed:
http://forum.xda-developers.com/opt...optimus-l9-ii-lg-d605-unroot-unbrick-t2964693
Click to expand...
Click to collapse
I am not gonna reply again but I am just saying you have no idea. Do not talk unless you are sure you can hardbrick any device with just root and just writing on second bootloader partition. Read about it if you don't know. Do not argue about it.
I can't get into download mode
kikobuendia said:
I can't get into download mode
Click to expand...
Click to collapse
Then that's a hard brick pretty much. Pull the battery out and connect the phone to PC. Tell me if it gets recognized.
EDIT: OFC wait like 6 seconds then put it back and after that connect to USB.
When i connect it pc makes a sound
kikobuendia said:
When i connect it pc makes a sound
Click to expand...
Click to collapse
I don't care if it makes a sound or not it's like it gets recognized? Look into device manager.
christi9503 said:
I don't care if it makes a sound or not it's like it gets recognized? Look into device manager.
Click to expand...
Click to collapse
Yes but flashtool doesnt recognize it
kikobuendia said:
Yes but flashtool doesnt recognize it
Click to expand...
Click to collapse
If you want to get this fixed just listen to me. It won't work like this tell me the answers to my questions and we might solve your problem. What is your device recognized as. Make me a screenshot of device manager if you can't explain.
neutrondev said:
Then that's a hard brick pretty much. Pull the battery out and connect the phone to PC. Tell me if it gets recognized.
EDIT: OFC wait like 6 seconds then put it back and after that connect to USB.
Click to expand...
Click to collapse
I have the same probalem, cant get to download mode, when i connect to pc it recognise it in hs usb qdloader 9008, any solutions to fix it. I flashed wrong .tot file.
did you managed to unbricked it?
I have the same probalem, cant get to download mode, when i connect to pc it recognise it in hs usb qdloader 9008, any solutions to fix it. I flashed wrong .tot file.
Click to expand...
Click to collapse
No, no luck yet. Seems to be impossible.
I connect to this post cuz my d605 is also facing a similiar issue, no system, no recovery, no adb, download mode worked only twice, for the rest, only emergency mode works, phone cannot even charge.
Phone is recognized from pc, I uninstalled modem drivers but stays in Emergency only few seconds then it shuts down (not sure if its the battery, since it doesn't charge as well). It shuts down actually at the moment that LG mobile support tool seems to recognize it.
It worked couple of times, phone was keeping staying in emergency mode for the beginning of the procedure but at the moment it need to put the kdz into the phone, the phone die.
The two times download mode worked, same, just shutting down immediately. This with LG support tool or LG flashtool2014.
KDZ_FW_UPD worked the first time after install and then doesn't run anymore, on two different Win10 machines.
I have no idea how to come out of this nightmare, just want to flash it :/
Ag0n1a said:
I connect to this post cuz my d605 is also facing a similiar issue, no system, no recovery, no adb, download mode worked only twice, for the rest, only emergency mode works, phone cannot even charge.
Phone is recognized from pc, I uninstalled modem drivers but stays in Emergency only few seconds then it shuts down (not sure if its the battery, since it doesn't charge as well). It shuts down actually at the moment that LG mobile support tool seems to recognize it.
It worked couple of times, phone was keeping staying in emergency mode for the beginning of the procedure but at the moment it need to put the kdz into the phone, the phone die.
The two times download mode worked, same, just shutting down immediately. This with LG support tool or LG flashtool2014.
KDZ_FW_UPD worked the first time after install and then doesn't run anymore, on two different Win10 machines.
I have no idea how to come out of this nightmare, just want to flash it :/
Click to expand...
Click to collapse
well, sorry for not replying earlier. My phone was on guarantee for about 2 months after I wrote the post. I just send it to LG Hellas via the e-shop I bought it from and in about 2-3 weeks, I had my D605 back like it was brand new. I searched a lot about my D605 hard bricked and I found that it is not fixable. My phone could not go into download mode though, as yours. Hope I helped you even a lil bit. Sorry for my bad English.
Hi,
i have Lg G2 D802 European (UK purchase) model phone of which is password locked, it was used by one of my family member and they have forgotten the Password. its in stock firmware.
here are the bellow issue i am facing;
1. USB Debugging mode is not activated
2. phone doesn't boot up to Recovery (for some reason its not going to recovery- key combination doesn't work)
3. wifi and Data was not active before its getting locked.
all i have is download mode. which is not been quite help. i have also user's Google account details which is also not been a help as WIFI/DATA is not being connecting.
I tried with LG suite, phone is getting recognized
i tried ADB, but phone doest get recognized to execute the command .
i tried almost all method which was provided in the XDA and couldn't get to their.
Please advice.
in this case you have only one option left and that is make reflash stock rom using download mode.
as you described debugging is off, No Data Connection, Recovery isn't accessible. you are simply locked away from any way to unlock your device
Download the stock Rom and flash it using Odin.
And remember one thing, always make sure USB Debugging is enabled, it really helps in such cases.
all the best
Hit Thanks if helped.
abhinavp649 said:
in this case you have only one option left and that is make reflash stock rom using download mode.
as you described debugging is off, No Data Connection, Recovery isn't accessible. you are simply locked away from any way to unlock your device
Download the stock Rom and flash it using Odin.
And remember one thing, always make sure USB Debugging is enabled, it really helps in such cases.
all the best
Hit Thanks if helped.
Click to expand...
Click to collapse
Odin Dint detect my phone in download mode.
akshayhgd said:
Odin Dint detect my phone in download mode.
Click to expand...
Click to collapse
I'm so sorry that was so dumb of me, obviously it will not detect because you have a LG Device And ODIN is SAMSUNG handsets only.
you can factory reset your phone, just follow this tutorial:
https://www.youtube.com/watch?v=3ogBvzbPikc
abhinavp649 said:
I'm so sorry that was so dumb of me, obviously it will not detect because you have a LG Device And ODIN is SAMSUNG handsets only.
you can factory reset your phone, just follow this tutorial:
https://www.youtube.com/watch?v=3ogBvzbPikc
Click to expand...
Click to collapse
Tried - dint work, as i i mentioned earlier this key combination is not working though Volume down button works.
Guys, any suggestion? or any method to wipe or restore?
please advice.
akshayhgd said:
Guys, any suggestion? or any method to wipe or restore?
please advice.
Click to expand...
Click to collapse
I don't know why the Recovery Combination isn't working.
The last option is left to take your phone any service center and let them do the technical work. and also ask them a way to access recovery.
I was updatting the phone to android 10, then the usb is pulled out of the port, the download process is stopped and my phone got stucks. I tried restarting it by "Pơwer+Volume down+Bixby" but after restarting, the phone boot up with the screen: " AN ERROR HAS OCCURRED WHILE UPDATING THE DEVICE SOFTWARE USE THE EMERGENCY RECOVERY FUNCTION IN THE SMART SWITCH PC SOFTWARE."
I couldn't access to download mode again or do anything. Please help me what I need to do now :crying::crying:
emoli824 said:
I was updatting the phone to android 10, then the usb is pulled out of the port, the download process is stopped and my phone got stucks. I tried restarting it by "Pơwer+Volume down+Bixby" but after restarting, the phone boot up with the screen: " AN ERROR HAS OCCURRED WHILE UPDATING THE DEVICE SOFTWARE USE THE EMERGENCY RECOVERY FUNCTION IN THE SMART SWITCH PC SOFTWARE."
I couldn't access to download mode again or do anything. Please help me what I need to do now :crying::crying:
Click to expand...
Click to collapse
Edit : I figured out by myself how to solve it, just flash the update via odin from this error screen, everthing works now
emoli824 said:
Edit : I figured out by myself how to solve it, just flash the update via odin from this error screen, everthing works now
Click to expand...
Click to collapse
Yea I really love this screen. It's a real heart stopper if you've never dealt with it??? but it's basically download mode