Related
I might have accidentally bricked my SGS 2. I get a screen saying:
"firmware upgrade encountered an issue. Please select recovery mode in kies and try again"
with a mobile phone and a computer logo with a Yellow triangle in between.
I know abt Rooting and ROM flashing etc and has been doing it for the last couple or years.
I flashed Franklin's XXKG3 Kernels, and before I could flash Chainfire's XXKG3 kernel, the USB ports refused to recognize my handset. I can still go into download mode but the Odin or Samsung Kies etc. won't do nothing.
Keeps saying "USB Device not recognized"
Please help!!!!
leo13aug79 said:
I might have accidentally bricked my SGS 2. I get a screen saying:
"firmware upgrade encountered an issue. Please select recovery mode in kies and try again"
with a mobile phone and a computer logo with a Yellow triangle in between.
I know abt Rooting and ROM flashing etc and has been doing it for the last couple or years.
I flashed Franklin's XXKG3 Kernels, and before I could flash Chainfire's XXKG3 kernel, the USB ports refused to recognize my handset. I can still go into download mode but the Odin or Samsung Kies etc. won't do nothing.
Keeps saying "USB Device not recognized"
Please help!!!!
Click to expand...
Click to collapse
Might help to reinstall KIES or try another computer.
Keeps saying "USB Device not recognized"
USB drivers problem remove Kies totally and reinstall .
Connect in mass storage mode and let windows find drivers .
That fails its broken phone .
jje
you broke your phone.
buy another SGS II
You can always try using a USB JIG to put the phone in download mode.
leo13aug79 said:
Keeps saying "USB Device not recognized"
Click to expand...
Click to collapse
Uninstall the Samsung USB Driver from Control Panel
START/Control Panel/Programs and Features
Select "SAMSUNG USB Driver for Mobile Phones" and then uninstall
reboot your PC and then re-install the Samsung USB Driver from:-
C:\Program Files\Samsung\Kies\USB Driver
and run "SAMSUNG_USB_Driver_for_Mobile_Phones.exe"
Doing that will make sure there is no USB driver corruption.
"firmware upgrade encountered an issue. Please select recovery mode in kies and try again"
Click to expand...
Click to collapse
I had the same problem on my SGS4g after updating to a leaked 2.3.4 rom, which would not make phone calls. Tried to use heidmall to downgrade by loading a new rom. After installing the usb driver as described here http://forum.xda-developers.com/showpost.php?p=14798367&postcount=1 . After reboot I get the error screen <phone..!..Computer> "firmware upgrade encountered an issue. Please select recovery mode in kies and try again". I then took the following steps.
I came across this site: http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_Series#Bricked_Screen Under the bricked section it mentions a couple things to try. I the reboot cycle with a couple of times and kept on getting the same screen. Still no go.
I took Odia's advice an did a complete removal of all usb drivers as mentioned and reinstalled kies. This was key in getting odin to recognize the phone again.
My solution:
I try Odin again to try to get it to recognize my phone. I open odin with the usb connected in this state and it is not recognized. I pull battery, it boots to error screen. I restart odin and then plug in the usb and it is recognized. I was then able to load my pit, pda, phone, csc back onto the phone with odin. The first time it tried to load the data it failed, the second time it worked!
Interestingly I never got the "Download Screen". I was still on the mentioned error screen, yet odin was able to still see the phone. The status bar still showed up on the error screen as the fresh rom was being loaded.
I thought I was totally bricked, but this method worked in my case. Hope something similar might work for you.
I still don't know I would get this error screen and have to go through this after loading the required usb driver for heimdall? Any ideas?
OMG! It's WORKING!
Thanks a lot to you all guys for the co-operation....
So, what did I do???? I uninstalled Kies and re-installed a couple of times but it won't access it. Tried Odin in all possible ways, No success. While playing and after ordering a "Jig" from some1 in USA,
I thought of something else and while the phone still being connected with the pc, I ran SuperOneClick, but it went on saying waiting for the device,.... I accidentally or in frustration hit the "HOME" button and it started doing something, USB drivers and Modem drivers installed on PC. Then I started Odin and the port went "Yellow". And I flashed it with the XXKG3.....
OMG! I'm so much relieved!!!!!!!! thanks God
thank you all too
Love your SGS2 and love God! Bless you all!
fvnktion said:
I had the same problem on my SGS4g after updating to a leaked 2.3.4 rom, which would not make phone calls. Tried to use heidmall to downgrade by loading a new rom. After installing the usb driver as described here http://forum.xda-developers.com/showpost.php?p=14798367&postcount=1 . After reboot I get the error screen <phone..!..Computer> "firmware upgrade encountered an issue. Please select recovery mode in kies and try again". I then took the following steps.
I came across this site: http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_Series#Bricked_Screen Under the bricked section it mentions a couple things to try. I the reboot cycle with a couple of times and kept on getting the same screen. Still no go.
I took Odia's advice an did a complete removal of all usb drivers as mentioned and reinstalled kies. This was key in getting odin to recognize the phone again.
My solution:
I try Odin again to try to get it to recognize my phone. I open odin with the usb connected in this state and it is not recognized. I pull battery, it boots to error screen. I restart odin and then plug in the usb and it is recognized. I was then able to load my pit, pda, phone, csc back onto the phone with odin. The first time it tried to load the data it failed, the second time it worked!
Interestingly I never got the "Download Screen". I was still on the mentioned error screen, yet odin was able to still see the phone. The status bar still showed up on the error screen as the fresh rom was being loaded.
I thought I was totally bricked, but this method worked in my case. Hope something similar might work for you.
I still don't know I would get this error screen and have to go through this after loading the required usb driver for heimdall? Any ideas?
Click to expand...
Click to collapse
I love you man! You saved my phone and me!
So what have we learnt today? Don't go screaming "brick!" everytime you encounter a problem
I had a same issue yellow triangle between Phone and PC symbol...
followed this step .. http://forum.xda-developers.com/showthread.php?t=1274337
just did like this on very first step to get into odin mode hold vol down and power for longer then usual to get into odin mode and by pass that yellow triangle between Phone and PC screen and then follow rest of it same and easy as right clicking on desktop LOL!
From my experience, only true brick I encountered was when I messed with boot loaders. If the screen shows anything at all, Odin will recognize it. Glad to hear it's fixed
Sent from my GT-I9100 using XDA App
Odia said:
Uninstall the Samsung USB Driver from Control Panel
START/Control Panel/Programs and Features
Select "SAMSUNG USB Driver for Mobile Phones" and then uninstall
reboot your PC and then re-install the Samsung USB Driver from:-
C:\Program Files\Samsung\Kies\USB Driver
and run "SAMSUNG_USB_Driver_for_Mobile_Phones.exe"
Doing that will make sure there is no USB driver corruption.
Click to expand...
Click to collapse
I´d tried to upgrade my Infuse SGH-i997 (AT&T) but I did something wrong and now the cell phone no work.
When it turn on says:
"firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
The computer recognize the cell phone but I don´t know what else I can do.
Any suggestion?
Can you get into download mode? If yes then reflash stock firmware using Odin
Sent from my GT-I9100 using Tapatalk
A bricked phone is a phone which will not respond. It maybe a soft brick or hard.
If you can get into download or recovery all you have to do is reflash. Wipe data & Cache. You will be up and running. If your phone is not recognised by your computer then reinstall kies.
Sent from my GT-I9100
Yep. Infuse Q&A (You're in the wrong section).
anjimgo said:
I´d tried to upgrade my Infuse SGH-i997 (AT&T) but I did something wrong and now the cell phone no work.
When it turn on says:
"firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
The computer recognize the cell phone but I don´t know what else I can do.
Any suggestion?
Click to expand...
Click to collapse
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
Well, I got this same Firmware upgrade error. I can't get the computer to see it at all. It's almost like the USB port doesn't work anymore. I can get into the download mode but then it ends there. I cannot get into the bootloader at all. If I try, it goes to the error screen and if I boot normally, it goes to the error screen.
Brittlespeed said:
Well, I got this same Firmware upgrade error. I can't get the computer to see it at all. It's almost like the USB port doesn't work anymore. I can get into the download mode but then it ends there. I cannot get into the bootloader at all. If I try, it goes to the error screen and if I boot normally, it goes to the error screen.
Click to expand...
Click to collapse
I can't tell if you're asking for help or just letting people know, but anyway, considering all your previous posts were in the Epic 4G Touch forums, you've probably trashed your device flashing something meant for the I9100.
See this thread for confirmation of your new shiny brick, if my above assumption was correct: http://forum.xda-developers.com/showthread.php?t=1492323
this solution worked for a Galaxy s3 mini
fvnktion said:
I had the same problem on my SGS4g after updating to a leaked 2.3.4 rom, which would not make phone calls. Tried to use heidmall to downgrade by loading a new rom. After installing the usb driver as described here http://forum.xda-developers.com/showpost.php?p=14798367&postcount=1 . After reboot I get the error screen <phone..!..Computer> "firmware upgrade encountered an issue. Please select recovery mode in kies and try again". I then took the following steps.
I came across this site: http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_Series#Bricked_Screen Under the bricked section it mentions a couple things to try. I the reboot cycle with a couple of times and kept on getting the same screen. Still no go.
I took Odia's advice an did a complete removal of all usb drivers as mentioned and reinstalled kies. This was key in getting odin to recognize the phone again.
My solution:
I try Odin again to try to get it to recognize my phone. I open odin with the usb connected in this state and it is not recognized. I pull battery, it boots to error screen. I restart odin and then plug in the usb and it is recognized. I was then able to load my pit, pda, phone, csc back onto the phone with odin. The first time it tried to load the data it failed, the second time it worked!
Interestingly I never got the "Download Screen". I was still on the mentioned error screen, yet odin was able to still see the phone. The status bar still showed up on the error screen as the fresh rom was being loaded.
I thought I was totally bricked, but this method worked in my case. Hope something similar might work for you.
I still don't know I would get this error screen and have to go through this after loading the required usb driver for heimdall? Any ideas?
Click to expand...
Click to collapse
Thanks a lot. My teenage son thought he had bricked his S3 mini but I was able to fix it after reading this thread. Thanks.
Hi there,
I tried a number of ways to change the ROM on my phone from the stock to an upgraded or custom ROM. Using Odin I was always able to at least get the stock ROM back up and running.
This time I tried ClockWorkMod and something has gone wrong. I cannot turn the phone on, boot into recovery mode, or download mode and the phone is completely unresponsive. Nothing appears on the screen.
I've tried re-flashing the stock ROM through Odin and it will recognize that the phone is there and connected via USB however when I try to flash the stock ROM back onto it the program hangs at:
<1> Setup connection...
I'm running from Administrator on Windows 7, I don't have Kies installed, I have the most up to date Samsung USB drivers.
I really want to at least get the phone into download mode to flash the stock ROM back on... is really hope there is a way to do this.
Twisted_Daemon said:
This time I tried ClockWorkMod and something has gone wrong. I cannot turn the phone on, boot into recovery mode, or download mode and the phone is completely unresponsive. Nothing appears on the screen.
I've tried re-flashing the stock ROM through Odin and it will recognize that the phone is there and connected via USB however when I try to flash the stock ROM back onto it the program hangs at:
<1> Setup connection...
Click to expand...
Click to collapse
just curious... how you try re-flashing through odin, while the phone can not boot in download mode?
when you charge the phone, does it show the battery indication?
I get no battery charge indicator while the phone is plugged in via usb...
However Odin does recognize that I have the phone plugged in. I hoped that this would be enough to send a flash to it through Odin but it gets stuck at '<1> Setup Connection'
I'm currently installing Android SDK. If the computer knows it's there maybe I can send a command to make it reboot into download mode?
you need to have kies to let odin work
Sent from my GT-S5830 using xda premium
Ok re-installed Kies and gave it a go.
While Kies was open I got:
<1> --- cannot open the usb serial port. code: 5
I'm assuming because Kies was trying to do something with it at the same time.
While Kies is not open I get:
<1> setup connection... (<Hangs here like before)
Installed android SDK.
Tried running: adb reboot download
Response was: error: device not found
Both Kies and Odin know that something is there, but the SDK doesn't seem like it knows it's there and doesn't look like it can send commands to it
Twisted_Daemon said:
Installed android SDK.
Tried running: adb reboot download
Response was: error: device not found
Both Kies and Odin know that something is there, but the SDK doesn't seem like it knows it's there and doesn't look like it can send commands to it
Click to expand...
Click to collapse
first you needed to type adb devices
Sent from my GT-S5830 using xda premium
adb devices just brings up an empty list...
It says 'List of devices attached' and then nothing
I just really want to get it into download mode again, Odin and Kies know it's there to an extent but can't really do anything with it just yet...
Hiya!
Have exact same problem with my Ace...totally black but Odin find it. Then i stuck with that annoying "setup connection"
I connect my phone(or brick!!) with usb-cable, have no battery in it. Then i press vol down+home+power buttons and I think its in download mode. It´s just that I can´t see it becouse the screen is black.
[email protected] said:
Hiya!
Have exact same problem with my Ace...totally black but Odin find it. Then i stuck with that annoying "setup connection"
I connect my phone(or brick!!) with usb-cable, have no battery in it. Then i press vol down+home+power buttons and I think its in download mode. It´s just that I can´t see it becouse the screen is black.
Click to expand...
Click to collapse
Run
Code:
adb devices
And that will tell you if it is actually in download mode... it should list the device then the mode it is in on the right..
Most of the phones that couldnt boot into download mode were diagnosed as bricked, from what ive seen here in XDA, the SGA community.
However, you could spend a small penny on 3 100ohms resistors to create a USB jig as a last resort.
Try this :
-Put out battery
-Plug the usb cable pc - ace
-Make manipulation for download mod : home + power + sound - and plug battery in the same time
-Device go to download mod
Flash trought odin =)
Peanuts
Sorry for my ugly english, i'm french what ! ^^'
Whippopotamus said:
Run
Code:
adb devices
And that will tell you if it is actually in download mode... it should list the device then the mode it is in on the right..
Click to expand...
Click to collapse
Do you mean Tools--->manage AVDs in Android SDK?
Thanks for your help
Was it called ROM Manager on Market/Play? If so lie to service centre saying kies crashed when updating, there is nothing you can do. Sorry :/
[email protected] said:
Do you mean Tools--->manage AVDs in Android SDK?
Thanks for your help
Click to expand...
Click to collapse
no
cmd
type adb devices and a menu with
some text will apear
unwritten sentance
Or try tu use unbrick plug, which is nothing more than normal usb plug witch resistor 300K or set of resistors equal to 303K(it is more preciouse) shorted to 4 and 5 pin.
Are youll guys serious?? look at the date please ---feb 08 that guy hss probably fixed or thrown his phone out....who are youll talking to???
You know you are rooted when you use XDA more than FB
i think you have permanently bricked your ace, take it back to the store and say odin crashed while you were flashing gingerbread 2.3.7
Now I tried everything except the USB jig. I try to make one in next weekend. Else I must tanke it to the Samsung store and say something smart I let u guys know how it goes. Thanks for all help this far:thumbup:
Sent from my GT-I9100 using XDA
Hey all
I have a Galaxy S3 i9300... Today I got the OTA for 4.1.1 Jellybean I updated and now I lost my root!!! (still have SuperSU app but doesnt work or gets uninstalled)
Now I am trying to root it again but Odin3 v1.85 wont recognize my Phone in download mode!! Recognizes it when phone is on but not when its off!! Downloaded latest Kies and had it closed from task manager and all its related apps off too but Still odin wont recognize it in download mode!! been tryin since i did the Darn UPDATE! PLZ HELP :S
sohaib770 said:
Hey all
I have a Galaxy S3 i9300... Today I got the OTA for 4.1.1 Jellybean I updated and now I lost my root!!!
>>>>>Of course you lost root .
(still have SuperSU app but doesnt work or gets uninstalled)
>>>> Root the phone again .
Now I am trying to root it again but Odin3 v1.85 wont recognize my Phone in download mode!! Recognizes it when phone is on but not when its off!!
>>> Phone is supposed to be on and in download mode not off to use Odin .
Possible failed OTA update as per multiple posts due to root not removed .
Leading to USB on phone not recognized try a factory reset first .
jje
Click to expand...
Click to collapse
JJEgan said:
sohaib770 said:
Hey all
I have a Galaxy S3 i9300... Today I got the OTA for 4.1.1 Jellybean I updated and now I lost my root!!!
>>>>>Of course you lost root .
(still have SuperSU app but doesnt work or gets uninstalled)
>>>> Root the phone again .
Now I am trying to root it again but Odin3 v1.85 wont recognize my Phone in download mode!! Recognizes it when phone is on but not when its off!!
>>> Phone is supposed to be on and in download mode not off to use Odin .
Possible failed OTA update as per multiple posts due to root not removed .
Leading to USB on phone not recognized try a factory reset first .
jje
Click to expand...
Click to collapse
Thanks for the reply
Sorry it was on and in download mode didnt get recognized :S and tried factory reset too!!! still no luck
Click to expand...
Click to collapse
sohaib770 said:
JJEgan said:
Thanks for the reply
Sorry it was on and in download mode didnt get recognized :S and tried factory reset too!!! still no luck
Click to expand...
Click to collapse
Try Odin 3.04
sent from here, there, somewhere!!
Click to expand...
Click to collapse
reinstall drivers, try a different usb port. if using a desktop, use the ports on the back of the PC
Sent from my GT-I9300 using xda premium
sohaib770 said:
JJEgan said:
Thanks for the reply
Sorry it was on and in download mode didnt get recognized :S and tried factory reset too!!! still no luck
Click to expand...
Click to collapse
Plz Respond someone....
Click to expand...
Click to collapse
THAnks!!!!!!!!!!! Shifting usb to back of computer worked!!! U SAVIOURS THANKS A LOTT!!!!
Galaxy S3 not being recognized in odin in download mode
Could someone please assist.
My rooted Galaxy S3 phone (FW v4.1.2) is stuck at the Samsung startup screen after installing a font app from the app store
To resolve I have tried:
1. The recovery screen - doing a factory reset and reboot
2.. Reflash through ODIN.
I can get get the phone into download mode but ODIN will not recognize the phone in Download mode (Funny that phone is recognised by Odin at the stuck Samsung boot screen)
- I have unistalled and reinstalled KIES and USB drivers
- I am using the stock USB cable
- Tried different USB ports on computer
- Tried on different computers
The problem may be Windows driver related. Because phone gets stuck at the Samsung startup screen, all processes of driver installation do not conclude successful. "MTP USB Device" shows error in Windows Device manager, USB composite deivce.
Uninstalled and reinstalled these a couple of times without success.
Please assist
Issues with usb on s3
Actually fixed my own Question....
My phone was in download mode and was not being recognized by my computer my windows 7 computer. I pressed the usb icon, where a box popped up saying that there was an unknown device. You could find this in device manager.
I then went to device manager to update the driver instead of pointing the device directly to the driver when i clicked browse my computer for software then it shows a location and option to let me pick from a list of device drivers on my computer then a box pops up showing model above that there is a little check box uncheck that two boxes will appear with manufacturer and model
Scroll samsung electronics and model samsung mobile composite device that is what you want to update the driver to...
I pulled the battery then re-entered download mode and windows to over installing the rest now it works fine. I would attach images but it will not let me for some reason. if anyone can help with that I will do it later.
THIS COULD POSSIBLY help with devices not being found on computers in bootloader or just on rom loaded and running..
Skywatcher1 said:
Could someone please assist.
My rooted Galaxy S3 phone (FW v4.1.2) is stuck at the Samsung startup screen after installing a font app from the app store
To resolve I have tried:
1. The recovery screen - doing a factory reset and reboot
2.. Reflash through ODIN.
I can get get the phone into download mode but ODIN will not recognize the phone in Download mode (Funny that phone is recognised by Odin at the stuck Samsung boot screen)
- I have unistalled and reinstalled KIES and USB drivers
- I am using the stock USB cable
- Tried different USB ports on computer
- Tried on different computers
The problem may be Windows driver related. Because phone gets stuck at the Samsung startup screen, all processes of driver installation do not conclude successful. "MTP USB Device" shows error in Windows Device manager, USB composite deivce.
Uninstalled and reinstalled these a couple of times without success.
Please assist
Click to expand...
Click to collapse
have you got the necessary drivers also you need to stop all kies activities.
uable to see added message inn download mode
tian105 said:
reinstall drivers, try a different usb port. if using a desktop, use the ports on the back of the PC
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
uable to see added message inn download mode!!!!!!!!!!
Please help
Maybe solved it
Hey guys, i know it's a bit late now, but i had exactly the same problem with my gt-i9300 (got stuck on samsung splash screen and odin didn't recognize it in download mode) and just realised that everytime, i connected my phone to my PC in download mode, a message would appear that "Gadget Device" (or something like that) was connected. Then i searched in my device manager for the name of it (i found it under USB-Devices) and uninstalled the driver of it. As i connected it again with odin started it would install the driver automatically and *swoosh* odin recognized it.
A year and some later after the last post and I seem to be having this problem as well... I believe it was due to a bad flash at very low battery level which ended up in encryption failure ya da da, factory reset, clear/format everything and flash custom rom from SD because any other connection would not work.... then managed to get windows (many flavors inc. 7, 8 and 10) to connect as MTP or in USB debugging mode but Odin mode (download) just won't do anything... i put the phone in DL mode, nothing happens, no windows connection sounds, no changes in devices manager, even when searching for new hardware. I'd be very interested to know if anyone has had anything like that. I'd really like to flash stock to go back to a custom rom, flash twrp to replace cwm but all seems to no avail if i can't get a connection while in DL mode.
tried to install adb fastboot but also nada since no connection is being made.... might be something with DL mode gone awry with the bad flash... long story but OTA update from current ROM decided on its own to push update even though battery was at 5% and no user interaction ever happened...
we'll see what happens...
after replacing mainboard of my s3 gt-i9300 my computer doesn't recognize phone at all in download mode but in while phone is on
mtp works fine via usb
please help
Are you using the original Samsung USB cable when the phone is in download mode?
romeeoo said:
after replacing mainboard of my s3 gt-i9300 my computer doesn't recognize phone at all in download mode but in while phone is on
mtp works fine via usb
please help
Click to expand...
Click to collapse
Driver issue. Find the correct drivers.
Beamed in by telepathy.
Hello All,
I've been reading posts from here for a long time but this is my first post.
I'm coming here as a last resort to save my Galaxy s2 (SGH-T989) which has a stock ROM.
Here's what happened.
I dropped my phone and then it got stuck in bootloop (it only boots until I see the "SAMSUNG" word animation and stops there).
At that point, ODIN 'sees' that there's a connected device; KIES keeps "connecting...." but can't actually connect; ADB does not show any connected device.
So, what I wanted to do was to factory "reset" the phone. The problem is I can't get the phone into Recovery mode. I believe it's because my volume down button was acting up when the phone was working. However, I can get to "Download Mode" using a USB Jig.
So, the next thing to do is to flash a new stock ROM. However, whenever I connect my phone when it's in "Download Mode", ODIN does not see it.
Yes, I've installed, re-installed, removed, re-installed all drivers and Kies and I've done that so many times you can't even believe it.
The problem is that the device driver "SAMSUNG Mobile USB CDC Composite Device" gives the following error "This device cannot start. (Code 10)", and I don't know why or how I can get rid of that. As mentioned above, I've tried all the device driver installation fixes but none has worked.
I mean, when the phone is not in Download Mode and I connect it to my PC, all device drivers are working fine with no error, but when it's in Download Mode, I get the error mentioned above "This Device cannot start.".
So, my questions:
1) Is there a way to get to Recovery Mode without using the button combinations? (The phone is in bootloop)
2) How can I fix the device driver error mentioned above to get ODIN to see my device?
3) Is there anything else I need to be doing?
This problem is really frustrating and I've been on it for more than 2 weeks and nothing has worked so far. Any help is greatly appreciated.
1. I think you have flashed an bad kernel if you cant get into recovery mode and i dont get it why your volume down acts like up?.
2. http://support.microsoft.com/kb/943104 try to maybe also disable kies and try again.
3. Kies is on, adb doesnt work at samsung/download screen, try to reinstall samsung usb drivers again :/ yes I know but to be sure, disable driver signature or something like that if you are on windows 8.x, try another usb cable.
2weeks dont sound good. I hope these tips could help a bit but I still wonder why your phone got in bootloop when you dropped it !?!? What were you doing at that time and did the battery go out?
wulsic said:
1. I think you have flashed an bad kernel if you cant get into recovery mode and i dont get it why your volume down acts like up?.
2. try to maybe also disable kies and try again.
3. Kies is on, adb doesnt work at samsung/download screen, try to reinstall samsung usb drivers again :/ yes I know but to be sure, disable driver signature or something like that if you are on windows 8.x, try another usb cable.
2weeks dont sound good. I hope these tips could help a bit but I still wonder why your phone got in bootloop when you dropped it !?!? What were you doing at that time and did the battery go out?
Click to expand...
Click to collapse
Thanks for the quick reply, wulsic.
1. No, I did not flash any kernel on this phone, everything on it is stock and was working just fine before it was dropped. I meant that the volume down was not working properly, not that it was acting like up.
2. I tried that but did not work
3. The drivers are working fine when the phone is not in Download Mode, it's only when it's in Download Mode that I get the error and I've tried re-installing drivers and everything, I think the problem is with the device itself not a driver problem.
Hi all,
Please anyone help me!! I flashed 5.0.1. UB Team Roam few days back. My phone's all data lost I don't know how but it lost and even my phone. I want to downgrade but it even doesn't let me to do it. I can enter recovery mode as well download mode. But my phone is not recognized by windows (Its unknown device in device manager). Whenever I plug usb cable the popup comes that usb device has malfunctioned and windows does not recognize it. I have tried all the possible mathod to get it recognize but I am failing everytime.
I have stock firmware downloaded 4.3 and odin ready but I could not flash it due to the problem. Some one on the XDA told me that the file system of Lollipop is different and that's why I am not able to do so, But I am unable to figure out the problem. Please help and suggest what to do...
rawalmaulin said:
Hi all,
Please anyone help me!! I flashed 5.0.1. UB Team Roam few days back. My phone's all data lost I don't know how but it lost and even my phone. I want to downgrade but it even doesn't let me to do it. I can enter recovery mode as well download mode. But my phone is not recognized by windows (Its unknown device in device manager). Whenever I plug usb cable the popup comes that usb device has malfunctioned and windows does not recognize it. I have tried all the possible mathod to get it recognize but I am failing everytime.
I have stock firmware downloaded 4.3 and odin ready but I could not flash it due to the problem. Some one on the XDA told me that the file system of Lollipop is different and that's why I am not able to do so, But I am unable to figure out the problem. Please help and suggest what to do...
Click to expand...
Click to collapse
Flashing a new rom will not remove old user data unless you formatted it completely.
Odin will work only in download mode and you need to right click > Run as Admin.
Enter download mode on your phone and connect your device to PC then flash the stock 4.3
RazorMC said:
Flashing a new rom will not remove old user data unless you formatted it completely.
Odin will work only in download mode and you need to right click > Run as Admin.
Enter download mode on your phone and connect your device to PC then flash the stock 4.3
Click to expand...
Click to collapse
Thanks for reply but I am doing same thing but my phone is not recognized by windows. The popup comes each & everytime that USB device has malfunctioned and windows does not recognize it. So, I could not connect the phone in MTP or PTP mode when the phone is running or even when I put it in download mode and connect to pc. Same error is comming. I have tried the same thing on several PC/Laptop, Tried changing USB Cables god, don't know what to do....:crying:
@rawalmaulin: uninstall KIES & drivers and install the drivers again.
rawalmaulin said:
Hi all,
Please anyone help me!! I flashed 5.0.1. UB Team Roam few days back. My phone's all data lost I don't know how but it lost and even my phone. I want to downgrade but it even doesn't let me to do it. I can enter recovery mode as well download mode. But my phone is not recognized by windows (Its unknown device in device manager). Whenever I plug usb cable the popup comes that usb device has malfunctioned and windows does not recognize it. I have tried all the possible mathod to get it recognize but I am failing everytime.
I have stock firmware downloaded 4.3 and odin ready but I could not flash it due to the problem. Some one on the XDA told me that the file system of Lollipop is different and that's why I am not able to do so, But I am unable to figure out the problem. Please help and suggest what to do...
Click to expand...
Click to collapse
Use mobile Odin until you get it fixed here >> https://play.google.com/store/apps/details?id=eu.chainfire.mobileodin.pro << this will allow you to flash stock without using a pc.
tallman43 said:
Use mobile Odin until you get it fixed here >> https://play.google.com/store/apps/details?id=eu.chainfire.mobileodin.pro << this will allow you to flash stock without using a pc.
Click to expand...
Click to collapse
Thanks for your valueable advice. I will try it today and will be back with result.
I done it but still the phone is not at all recognized